Related
Why is it that the Holux driver does not appear in the Tomtom list of available drivers. Can't seem to install anything from the CD driver supplied with the GPS receiver. Does anyone have any ideas?
Thank you in advance.
I got this from the tomtom website and posted it here a few weeks ago.
If you are thinking of buying TOMTOM 3 please read this from the TOMTOM website.
Compatibility
- Not compatible with Holux GPS Receiver
- Not compatible with Integral Compact Flash Cards
- Not compatible with CF Type II cards (Microdrives)
- Not compatible with TomTom II Maps
I got mine working with tomtom 2 by downloading bluetooth tools patch but havent tried it with tomtom 3.
I decided to give it a try. if you have the gps already bonded make sure you delete the bonding first. Download and install the latest bluetooth tools from here
http://bluetooth.i-networx.de/index_e.html
Set bluetooth to discoverable mode, choose "new", it will find the gps, enter code, mine is 6268, when you ok it, bluetooth tools should pop up, I chose serial/com4. Once complete, make sure bluetooth mode is "on".
Go to tomtom, choose "gps", go to the lower box where you should now see your holux gps listed, choose this then tick the large box on the left. You should now have a working tomtom3 system despite what it says on the tomtom website about it not working. :shock:
cruisin-thru said:
Once complete, make sure bluetooth mode is "on".
Go to tomtom, choose "gps", go to the lower box where you should now see your holux gps listed, choose this then tick the large box on the left. You should now have a working tomtom3 system despite what it says on the tomtom website about it not working. :shock:
Click to expand...
Click to collapse
howdy.
ive got myself a holux gr230 which of course isnt listed as a supported device, but once bonded its visible in the lower box, but it wont connect. what should i select in the upper box?
im also having probs with tomtom activation. it says its activated, but when i try to go into uk maps it just says that "this activation code is not valid for Great_Britain" but the majour roads of europe version seems to work fine. ne ideas?
Cheers.
Smiley
I am using the DCONNEX DC-230 BT GPS, which is in fact a rebadged Holux GR-230.
Flawlessly.
I use Rom 1,72 with native BT stack.
Just bond the GPS, say YES to questions on assigning a COM port
In TomTom select NMEA Bluetooth and COM5
Only issue is that TomTom alsmost hangs the MDAII when it cant find the GPS (ie. GPS off, BT off, GPS out of reach).
Still looking for a solution for that . . .
I have the same problem that TOMTOM hangs. This is very annonying as sometimes I would like to check the Map in TomTOm without having my Holux Mouse with me. I then have to use TomTom Wizard to uncheck the little box in gps setting and then change to simulator :?
Before I was using BluetoothTools and TomTOm worked also fine without a GPS Mouse for a Map, but Bluetooth Tools introduced a considerable lag (looking for bluetooth headset) of the XDA when taking a call, this was also very annoying as I use the XDA2 primarily as a phone, and the phone has to work perfect ....
Greetz
WELL I'M USING 1.60 ROM ON MY XDA 2, BT TOOLS, AND I BONDED ON COM 4...BUT ALL TOMTOM 3 SHOWS IN LOWER BOX IS:
COM 2,9bt ON COM 6, AND bt GPS.....
NOTHING OF THEM WORK...
PLEASE HELP ME...
@RDKAY:
Great to hear I am not the only one suffering from the TomTom hanging without GPS connected.
BTW: What ROM are you using?
I put bluetooth in discoverable mode, it finds the holux gps, it asks "do you want this device as a serial device" answer yes. Switch bluetooth to on, in tomtom, the top box reads tomtom wireless gps, the bottom box reads com 5, it works perfectly.
Im sure you all have latest opdate from tt..or? had the same problem activating major roads, opdate solved this problem..why use wizard changing gps? uncheck recieve all incoming beams in connections, go to programs/tomtom gps change gps to any serial gps..(not uncheking gives an error message: can not open com 1: port does not exits. rom 1.66.00).
Jensen
@edsub
I am using the Imate 1.72 Rom on my T-mobile mda2... don't think it is a rom issue although...
Im sure you all have latest opdate from tt..or?
Click to expand...
Click to collapse
I think it might be true that updating TT would do things better but:
I have bought TT with maps for Germany, Austria and Switzerland. And I just needed a Spain Map also which you cannot buy individually (TT just told me to buy also the Westeuropean package... :evil: ) so I got the Spain Map from Emule. :twisted:
Now when I do the TT update the Spain map doesn't work anymore, so I cannot do the update....
.why use wizard changing gps?
Click to expand...
Click to collapse
Because with opening directly TT Gps its hanging my mda2 completly, I have desactived incoming beams although :roll:
But anyway phone and TomTom work fine more or less, so "never change a running system" :wink:
Cheers
Rainer
Its looking more and more towards a rom issue.
People without the issue all have iMate roms
I have Qtek rom
What is your Rom build?
Mine
Version 1.72.00WWE
Date 03/15/04
Radio 1.14.00
Protocol 1337.24
ExtRom 1.72.901 (my own)
Hi all, I bought a Qtek S100 and tried to connect it with my BT GPS receiver (Falcom Navi 1). It didn't work properly and I suddely lost te BT icon on the lower right hand side of the S100. It hasn't re-appeared even after several soft resets?
Does the S100 have the sae BT problems with GPS as the xdaII had?
I use BT GPS and the only problem so far is that I have to re-pair them sometimes.
Try Start->Settings->Connections->Bluetooth to get to the same screen as you would get to by clicking the BT icon.
THanks for the reply. Which BT GPS do you use? and with what Navigation program?
Holux GR-231 and TomTom3.
I am having problem with Bluetooth GPS as well. I have 2, one is iTrek Bluetooth GPS and one is ArcoreTech Bluetooth GPS.
Since I have tried both GPS units, I am pretty sure it's i-Mate JAM's Bluetooth problem.
Instead of upgrading my ROM to 1.06.00 WWE, I should have tried it out with version 1.03 first. I upgraded from 1.03 to 1.06 as soon as my JAM finished charging. BIG MISTAKE!
I ended up usiing "Pocket Bluetooth Tool" to designate COM8 (for example) for my GPS. However, if I happen to soft reset or turn of Bluetooth, I would have to pair it again.
I read many article's on the internet and the problem seems to point to the MS Bluetooth stack (instead of Widcomm used in my i-Mate PDA2K - and by the way PDA2K works perfectly with my GPS units).
Hopefuly i-Mate will address this problem during the next ROM update.
So how come Loboman's holux works ok?
Loboman are you using a different BT stack?
I would like to guess that he uses ROM version 1.03...
Jazzedout said:
So how come Loboman's holux works ok?
Loboman are you using a different BT stack?
Click to expand...
Click to collapse
I use 1.06.00. All i do is that I tap on the BT icon, choose 'Devices', tap 'New...' and waits until the phone finds the GPS. Then I add it and pair it with the passkey. Then I had to scan all serial ports using a program that Holux supplies (I bet it works with any BT reciever though) to find out that my port was COM5 and finally I set my programs to use COM5. As I previously stated, I do have to re-pair them sometimes for some reason, but I can live with that.
I previously had an Acore unit which worked ok with my iPAQ 5450 (also MS BT stack) in WM2003. It took me all the way from northern Sweden to Barcelona in Spain last summer
I have not used Pocket Bluetooth Tool, but I have read about it. I think that it works without it so far. I also leave my BT on 24/7 since I don't think that it uses too much battery.
I hope things work out for you.
Absolutley no problems with Rom 1.01.01 Ger and Navilock BT-308 GPS-Mouse
I am not sure if the following has anything to do with Bluetooth but at least it cured my Bluetooth vs. GPS problem, for now.
On Club i-Mate's ROM update page, I found out that if the radio version is 1.10, then I am NOT suppose to apply the camera patch. After I uninstalled it, my JAM seems to work better with Bluetooth GPS units. My biggest problems were:
1. Once I soft reset my JAM, I have to re-pair my GPS units.
2. PrymeNav software took a long time to scan for GPS - and crashes sometimes when I designate already-scanned port.
3. Unable to hold two paired GPS units in Bluetooth Device List (though only used on at a time).
I have played with it after I uninstalled the camera patch and to this morning my GPS units still function well. Another key is to turn on the GPS unit and make sure it is linked (as indicated by its LED) - then turn on the GPS software. That way the hardwares are ensured to be linked.
As a side bonus, now I can perform Bluetooth Activesync on my Mac (via PocketMac software). However, I still require Pocket Bluetooth Tool installed on my JAM.
Weird!
Hi,
I seem to be having a problem with GPS bluetooth related connections with my Dopod 838 Pro.
Ive paired my Globalsat BT338 receiver and setup an outgoing serial port on my Dopod, and I can use Destinator 6 and TomTom 6 fine (for the time being).
The next day/time when I try to start the GPS applications, both programs report that they cant find the GPS signal/receiver even though its been correctly configured to work previously.
I then have to enter the Bluetooth settings to change and assign another outgoing serial port and reconfigure the GPS applications to the new serial port to work.
The programs and the GPS receiver worked fine with my old iPAQ hx4700 so its not a receiver or program issue.
I'm at my wits end and would appreciate any info on solving this problem.
Thanks in advance.
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Rik_053 said:
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Click to expand...
Click to collapse
Hi,
Ive been through this unpair / pair scenario more than a few times and Ive never used a secure com port connection.
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
njay22 said:
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
Click to expand...
Click to collapse
Hi,
The pairing has been done before any program was launched.
Im trying with both destinator 6 and tomtom 6
Bluetooth GPS Woes...
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
clearwave1 said:
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
Click to expand...
Click to collapse
Hi,
Both the bluetooth reciever and the software work fine and obtain a fix.
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
the gps reciver obtains a fix but the pda cant see it.
Destinator PN has an automatic reconnect tick box on the GPS Settings page. I don't know if D6 or TT have a similar thing. If so, make sure this box is ticked.
I use D PN with a Parrot CK3300 combined handsfree and GPS receiver, and after major stuffing around trying to get D PN set to the correct port initially, it has worked fine since.
Ive sorted the issue out and hopefully this will help others experiencing the same problem.
The problem was that although an outgoing serial port was setup, for some reason it was not mapped to the bluetooth device.
It just specified "COM9" instead of having the bluetooth device "BT338(COM9)" under the bluetooth COM Ports setting.
This seems to be the reason why when the device was unpaired/paired and a com port setup it worked for the time being. After the bluetooth device was disconnected the settings mapping to the device were not retained.
Rambler76,
I am looking to get a GPS unit for my Dopod 838Pro. Which of the two, Destinator or Tom Tom, do you like best?
I know where to get Destinator 6 in Sydney, where does one get Tom Tom 6?
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
killabeezz said:
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
hi,
what i mean to say is that i switch com ports.
the issue was resolved by mapping the com port to the bluetooth device.
Click to expand...
Click to collapse
Yes I understand what you have done but can I ask again :-
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Thanks,,
Tom Tom Woes
Hi,
I had the same problem until recently.
To fix I did the following:
Delete pair with GPS receiver,
Create new pair with GPS receiver (put in passkey 0000)
Tick the box for Serial Port
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Now open TomTom, Select Change Preferences, then Show GPS Status, then Configure, then Other Bluetooth Receiver, then Select COM 4.
Now TT works as it should - turning on and off Bluetooth on Open/Close, and no problems with needing to re-pair.
Previously I had always paired the BT GPS on COM 0 with Secure ticked. This worked the first time only, and I had to re-create the same pair each time I wanted to run the app.
Hope this helps some of you.
(btw I was using TT6 when I found the solution, but I imagine it would have worked for 5 too)
dopod bluetooth problems
Guys I have the same problem with my bluetooth and my dopod. It connects then disconnects.
I have also noticed that the systems unchecks the turn on bluetooth check box and the make this device discoverable to other devices.
Does anyone have any ideas?
Guys I just read this at another forum.
"The Dopod 838 pro and WM5 have chronic problems with the bluetooth stack, which is why everyone is waiting for the new ROM to appear, which will hopefully be WM6. HTC (manufacturers of Dopod 838 pro) announced that the new ROM will fix all of the known problems"
This I learn after having a car accident (minor) in my car playing with the bluetooth and trying to get it to work. Hutchison 3g should only be selling these with a warning.
I assume there is also a problem with the JasJam as they are the same phone.
Knight__Mayor said:
Hi,
To fix I did the following:
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Click to expand...
Click to collapse
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
dabs1 said:
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
Click to expand...
Click to collapse
yeah i recon its the screwy MS bluetooth stack, im interested to hear from anyone running tomtom on hermes with the widcomm bluetooth
Tomtom And Gps
I have found that the best cure for gps woes and pocket pc is to use GPS Gate. It make a virtual com port and will always be the same. I have used it always and never have problems connecting.
G
I'm just going crazy with this problem:
I installed TT6 on the I-mate Jamin, connected to the BT GPS Holux GPSlim236 and it was working. After some hours or days, when I launch TT6, it does not recognize the BT GPS, it displays " no GPS (flight mode)" also if BT is active on the pda.
I tried also to update the firmware to the LvsW AKU 2.3.1 that should be very stable but the problem arised again. If I install again TT& it works again for some hour only.
Anothe strange behaviour is that TT6 is not trying to activate automatically the BT when launched, while after the installation it was.
Any solution?
Thanks in advance
did you disabled the phone?
when the phone is off, even if bluetooth is on, tomtom can not communicate with any bluetooth gps.
a new hope...
Maybe yes, I disabled the phone, as I was doing in my previous iPaq WM2003. I will follow your indication and give feedback asap. The strange thing is that other GPS programs are working with the BT GPS even if the phone is disabled.
Thank you! I could solved it!
Thank you, adl67-san, zadigre-san.
I had same problem with my QTEK9000 & TomTom6.
The problem was TomTom6 can not find GPS receiver(Holux GPSlim240).
But after Phone function is ON, it works well.
(Normally, I use my QTEK9000 without SIM.)
This problem has bother me for 1 month.
Now I can use it.
Thanks a lot again.
Sincerely yours,
Hello, I've got problem with my bluetooth gps (nemerix).
When I'd like to connect to my pda first I'm looking for new devices in bluetooth manager, then parring and seeting outgoing port. And then I'm starting my Navi aplication. It works.
But, when I'm shutting down gps device, turning off buetooth in pda and start it again I've to all tasks mention above - searching, parring and so on. In my opinion,when it's added to my bluetooth devices and properly parred once it should work every time I'd like to use it, however gps device doesn't communicate with pda.
It's quite annoying, why I cannot just start my gps device and my navi aplication and run - I spend a minute with setting connection.
Do anybody know how to fix my problem?
Are you using a custom rom? If so it could be a problem with the rom you are using. I've had the same problem in the past and a different rom fixed the problem.
I've got now Schaps_WM6Pro_Hermes_4.31_WWE_Full, which rom are you using -RanDomIze Final Storm v2.10?
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
I'll try, thanks for advice
Kladden said:
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
Click to expand...
Click to collapse
great tool thanks