Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Hello all... Ok, as I stated in the subject of this thread, my vibration isn't working on my MDA. I don't know what is going on. I've tried ticking all the checkboxes that say vibrate... moved the slider down to vibrate only... etc.. I don't know exactly how to troubleshoot it properly as I don't really know the full capabilities of this phone. But as far as I know, if you put the phone on vibrate, it should vibrate when someone calls right? Not the case with my phone.
Please could someone help me figure out what is going on... maybe it's a hardware issue that is unfixable... but maybe, just maybe.... it's some sort of registry thing where I can get it to vibrate... I don't like missing calls due to my ringtone being drowned out by street noise (thank God for voicemail and call history)... Thank you again, hope someone has a solution for me
I had the same problem happen to my 8125. The phone would vibrate when I held the comm button to change it from ringer to vibrate. But, when I recieved a phone call or text message, the phone would not vibrate. I knew the vibrate was working because it did vibrate when I changed the ringer. I had to do a hard reset to fix the problem though, so that may be your only solution.
Same here. Can anyone tell me which part or component on the O2 XDA II mini is responsible for viration?
Soft vibrate
In my case, the vibrate is working, but it's lost all it's power....feels like the motor is giving up. Is this normal? Does a vibrate motor on a phone have such a limited lifespan?
If it's used a lot then it's feasible for such a tiny vibrate component to burn out after a while maybe after a year or more.
Wonder anyone got this problem, make outgoing call or incoming call, no voice from
speaker. But if I press "Speaker On" during call I can hear the party voice. Playing
music song playback sound ok, only during call conversation can't hear any sound.
Any advice? Thanks.
I've exactly the same problem, but havn't found a solution jet!
has somebody found a solution jet. it's really anoying..
gijsje89 said:
I've exactly the same problem, but havn't found a solution jet!
has somebody found a solution jet. it's really anoying..
Click to expand...
Click to collapse
How long is your HTC Touch ? Mine is one year+ and if yours also a year+ phone, then
I probably can confirm the Touch got this problem and phone do not last long.
Same thing started happening to my Rogers elfin. On incoming calls, my microphone won't work unless I'm on speaker phone. I can't even make outgoing calls anymore. I keep getting the message "Call Ended".
I've tried flashing my original backup ROM and several different ROMS all with no success.
Anybody have any idea how to fix this please?
please a solution ....same problem
Try this:
During incoming call press volume button up. This isn't a tweak, it's just the normal settings. If it doesn't work you might have a hardware issue.
Hi, every time i call somebody or they call me my face touches the screen and either hangs up the call or activates speakerphone. I was wondering if maybe the sensors aren't working correctly or if there is a way to enable them.
thanks in advance zac
really need to sort this out as its my only problem with the leo.
My HD2's VIBRATE function has been on and off ever since I installed ENERGY ROM. It will initially work, but make a weird sounding, not normal, sound for a while, and then just stop working completely.
Does anybody know a possible solution to this?
Thanks!