Hi Everybody,
I am using the X01HT which running with
Rom : 2.05.255.1
Radio Ver. 1.34.00.10
The problem is my friend said that my speech sound very poor (the background sound very strong )
when my phone is connected with the BT Handfree.
Just wanna know how the chase the problem is from my handfree or my phone.
furthermore, Is it possible to check my handfree is running real A2DP (Stereo sound )
my Handfree info: http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050
sorry for my poor english
Your english is fine
This not an area I know much about but the following may be of use:
http://forum.xda-developers.com/showthread.php?p=1152585&highlight=sound+quality#post1152585
HtweakC Link
http://www.fit4cat.de/thread.php?threadid=263
Try using search as there are several posts on this kind of problem.
Mike
You can check A2DP by playing a song that is in stereo. Anything with an obvious sound in the right channel will do, as if A2DP is not working it will only be playing in mono.
Also, the little icon in the taksbar will show a headset with a music note inside of it if A2DP is working.
The sound problems you mention are probably due to the quality of the headset. Try it on another phone or try a different headset on your phone.
I am using the same ROM and radio and my BT works great. (AKU 3.3)
I use both the Nokia HS-12W and a HTC BHS 100.
A2DP will give true stereo in WMP10. Strange I found the Registry still set to mono, so I had to change that for stereo.
The call quality both incomming and outgoing is great with these headsets as well.
The HTC also allows you to use your favourite earphones as well.(3.5mm jack)
Hope this assists.
Thanks
Thanks all first.
Yesterday, I did some stupid test about the voice quality,
I used the recording function in Note to record my own sound near the TV in my home, and found it was not bad.
However, then I went out use the BT headset again, but my friend said, dont use it again, my sound really poor
After that, I bought a BT dongle to try to test my BT headwith in my computer, but the Dongle comes with the bad BT management Driver, called XTNDCoonect Blue Manager.
Do you all have the widcomm software and send it to me ?
I dont know it is against the policy in the forum.
Can enyone tell me if it is possible and how??
I have a Parrot 3100 and works fine for calls but can't put it saying nothing that comes from TOMTOM.
I have a friend that one time he heard the tomtom on a head-set.
But only one time and never more.
He doesn't know how!
Can enyone help me?
seem to recall people saying it works if
gps is connected first and then headset
You need a bluetooth headset with AD2P proflie. The standard hards free profile will only route calls to the headset. That said, if you press the voice dial button on your headset when an instruction is being read out, you will hear it in the headset (once only) - probably what the friend experienced.
Hi. I use a piece of software with my standard bt handsfree.
Chartcross Bluetooth Audio Router
The sound quality isn't stunning, but it lets all sounds that usually come from the inbuilt speaker to go through the handsfree instead
Tryed Chartcross Bluetooth Audio Router on my Trinity WM6 using hands free car kit (Delta System)... When activated it switches off the car speakers (like when calls arrive) but sounds still are on the speaker of pda...
Do you thing it will be necessary a reg tweak?
THX
No idea sorry. I only got my Trinity 2 days ago. I was using a prophet before which worked fine with it. I'll let you know if i do find anything though
IN MY HAND-FREE car kit my tomtom turned off the radio and instructions in car speakers.
right now that doesn't happen.
Infortunately i've tried so many roms i don't know i used at that time, and how make car speakers work again. Any help?
I would want/need an application w/c has a profile capability that will allow audios(call, microphone, mp3) to be redirected to both the wired earphone and at the same time spearphone or the phone itself, while the wired earphone is still plugged in. The audio needs to come out or the sound should come out on both the wired earphone and phone or speakerphone. I need this while driving and my wife needs to hear the message from the party being called or called upon. Or if I'm listening to a good music on my wired headset only, but later on would like to share it to everybody while driving again. I need to be able to toggle it easily. I've seen phoneweaver and phonealarm but these two does not fit the need describe above. If there is none existing, can somebody create this very simple app for my need? I'm willing to donate if ever. Btw, my unit is an O2 Xda Atom and I got this idea from the build in FM radio build in application that has this button w/c allows audio on both wired headset and phone. It does not work on calls and turning the radio always on drains the battery. And the wired headset acts as the antenna. Thanks in advance.
Not sure if this is the correct place to post this
I have just upgraded from a kaiser to the HD2. I have a Bury take and talk car kit installed so have replace the Kaiser cradle with the Universal Bluetooth cradle. The phone pairs ok, the volume is low over the car speakers but this was the same for the kaiser and I have found that bury sell an amplifier to boost the volume. So far so good.
My question now is is there any way for routing music and gps instructions over the bluetooth connection. Registry hack, app or whatever. I cant see that it cant be done. I have read bits on other threads / forums about routing to Bluetooth headsets, and im thinking this is similar.
Anyone got any good ideas? I havent installed or messed with much yet so am willing to try stuff and hard reset if required
If the carkit doubles as a bluetooth headset and no more, it will only support the protocol which enables you to place calls with the carkit, and route the audio and mic for the call over bluetooth. If you want an audio connection, be sure your carkit allows for an A2DP connection - then you will get music and possibly also voice streams via bluetooth out of your car speakers.
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?