Related
hi ppl
i don't really expect any real help, but i'll try:
i like to read ebooks in my bed at night (and most obviously it's dark then , so those two blinking leds (green for phone and blue for bluetooth) are really bright and hurt my eyes.
is there any patch, hack to make them turn of temporarily ?? i know i could turn off phone and bluetooth - but that's no acceptable because i have to be reachable by phone.
thanks
regards ize|man
Try a bit of blue tack over the led light. Always does the trick! During the day you could remove it!
Do you think I should patent that idea???!
Yes, as i had the same idea months ago..
Or maybe some thick tape, like duck tape would do the trick.
Personally i like having a phone that flashes at me, it means its working !
Try turning your radio off.
I haven't found any other solution.
woooaaaahhhh ....
i was impressed to see THREE answers to my question. and all of them are more or less useless
of course i could put my mda in a box and then i even won't hear it, and electromagnetic radiation would be less as well but that was not exactly what i was looking for.
i was looking for some more elegant way - like some registry hack or something. and as i said turning the device OFF is no solution ...
thanks anyway
regards ize|man
Why look :roll: for a complicated solution when bluetack was staring you in the face all a long!
Its like trying to make a bluetooth controlled machine to crack an egg!!!!!!
But anyway I have another idea. You can get these amazing silver pens. Just colour in the light!!!! You wont be able to tell the difference.
You can say that your xda is a special import from Timbuktu or something.
Always willing to help.(but sorry I'm not that technical)
Sorry, just one more idea, the last I promise.
I think the light flashes every 5 seconds. You could actually train yourself to blink at 5 second intervals so you miss the light.!!
How's that for a completely not technical, ingenious idea!!!
They didnt call me Handy Jack in school for nothing!
*looool*
not very useful - but very funny to read
regards ize|man
I have the same problem guys. During one executive meeting, i was requested by the chairman to get rid of the blinking yellow light. It was embarrasing.
The recommendations they made are all insulting. We really need help XDA people........where are you......
I'm sorry to see you took it as an insult. :shock:
Are you trying to see that XDA people are all grey suit wearing nerds who dont like a bit of humour?
I am sure the majority of the xda users in this forum agree that that is not the case. :?:
Besides, if you used bluetack it would have saved you the embarrassment in the meeting!
Damn this thread is hilarious, good job people :lol:
Okay, there isn't a way to turn off the bluetooth blue LED without turning off Bluetooth, however there is a way to turn off the green LED without turning off the radio. First make a full backup of your XDA II, then open up your favorite registry editor and search for "LEDMgr"
This should be in a key folder called Drivers in HKEY_LOCAL_MACHINE, but I don't know the exact location right now because I do not have my i-mate.
Okay, inside this LEDMgr keyfolder is a string called "Dll"
Rename that to "xDll" then do a soft reset.
That should take out the green LED, leaving the phone radio on.
You can now read ebooks in total darkness and at work you can send an SMS to the person across the chairman telling a joke about how his toupe is about to fall off.
:twisted: Damn you technical nerds! We simpletons believe in blue tack. How dare you commit such sacrilege?! Blue tackers of the world unite! Blue tack forever!
The real problem is that we in the US have no clue what "blue tack" is (is that some expression for TAPE?). So as not to admit that fact, :wink: we must invent marvelous technical alternatives to solving the problem at hand. Either that, or Aceangel just has way too much free time! :lol:
Blue tack FOREVER!
or you could of just desoldered the leds off the pbc lol.
bluetack for all you american and others is like squashy sticky blue stuff like playdoh but its used to stick up posters and things and you can also get white tak also which is horrible stuff as its like chewing gum lol
Blue tack, my friend, is the blue non-sticky, yet sticky substance normally used to stick posters to non sticky walls.
I imagine you Americans call it, "non-WMD, blue CIA Approved sticky thang" (not available in Eyeraq due to potential misuse)
Browsenow, your right, aceangel needs to find someting more productive to do with his time. Wandering round the registry is a path frought with thorny prickles waiting to stick in the XDA reset button permanently! :x
One day they will realise and come begging for my blue-tack solutions. You'll see. 8)
http://www.whsmith.co.uk/whs/go.asp?isbn=04422310&DB=320
Something funny hapened which reminded me of this thread.
A friend of mine with an xda refuses to use cases and he dropped it.
Funnily enough it dropped right on the green LED bit, damaging it!
Perhaps Blue-Tack was a waste of time after all. You need to strategically drop your XDA so it hits the right spot
aceangel said:
Damn this thread is hilarious, good job people :lol:
Okay, there isn't a way to turn off the bluetooth blue LED without turning off Bluetooth, however there is a way to turn off the green LED without turning off the radio. First make a full backup of your XDA II, then open up your favorite registry editor and search for "LEDMgr"
This should be in a key folder called Drivers in HKEY_LOCAL_MACHINE, but I don't know the exact location right now because I do not have my i-mate.
Okay, inside this LEDMgr keyfolder is a string called "Dll"
Rename that to "xDll" then do a soft reset.
That should take out the green LED, leaving the phone radio on.
You can now read ebooks in total darkness and at work you can send an SMS to the person across the chairman telling a joke about how his toupe is about to fall off.
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE, Drivers, BuiltIn, LEDmgr
It work fine!
Does anyone have a link where I can download bluetack ? I promise to upload on my FTP to share for everybody
cairo31male said:
Does anyone have a link where I can download bluetack ? I promise to upload on my FTP to share for everybody
Click to expand...
Click to collapse
What a joke! Do you want me to email you a version of bluetack or something :-S
Just make sure it is virus-free :twisted:
Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!
SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?
Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.
I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.
Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.
Anybody any idea? advice?
I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Anyone anyone?
HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.
mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?
i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .
dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.
I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.
Hello All,
This is the first time I'm posting a message, because this is the first time I'm not able to find the answer via the search.
I have an MDA Vario with a T-Mobile ROM, the latest.
What is happening is that when I use my screen in the portrait position it will turn white with all kind of stripes, then I have to turn it on and off and then I can see the normal screen for a few seconds before it happens again.
I have updated my ROM and no difference.
No I have found out that when I use it in the Landscape mode, with the keyboard unfolded it is not happening. As soon as a fold back the keyboard it happens again.
Can any body tell me how I can get this to go away? I have tried looking for a driver update for the screen or something, but without any luck.
Please help.
Thanks.
Jort.
i'm affraid it is a hardware problem
the same thing happens to me, except quite opposite - when i slide the keyboard out, sometimes screen goes bad. turn off and back on does the trick. also, when the screen is not unfolded completely you can see 'crawling dots' ... i think it has something to do with 'floppy' connector tape (if there is one) or another way the screen is connected with the base of the device. i wouldn't like to disassemble my wizard to verify this claim, unless someone can tell me how to fix it - so that i am sure. anyone has any experience with that?
People at PDA Club say it's connector tape.
Mine Wizard has the same problem, I left it at the shop where I purchased it, for a warranty repair. I hope they'll fix it.
Anyway, I heard that the cost of this repair is about 100PLN [ that is about 25 Euro ]
thanks swistak. unfortunately in my town (eastern poland) there isn't too many people who knows what a pda is, that includes mobile shop, or other service stations workers. but it's good to know there is a way of solving the issue.
Ask people at pdaclub.pl forum for help.
I know that there are few guys who run their repair points, maybe You could send it to them via post.
Ok, I have done some searching and I am still not sure of the answer to my question.
I have a HERM 100. I broke the screen on accident, but it was having the WSOD problem anyway. I still love the phone and I am trying to fix it.
First question is I have the screen with the P/N HTC60H00037-01M. I have looked several places on ebay, and the only ones I can find selling this exact screen are almost 2 times as expensive. Most if not all the others are saying this screen will work HTC60H00037-00M
Here are the links
The cheaper one with -00M on the end in one of the pictures.
The more expensive one with the EXACT same number as my screen in the pic.
Will the cheaper one work in my phone or is there a real difference between the two screens.
Oh, and does anyone know the best way to get a chip reflowed? I have been watching and reading the WSOD thread, and the only option that seems to fix the problem permanently. I am not able to do this myself I don't think, but if anyone has a surefire way to do this at home I am willing to listen, I just want my favorite phone back.
Chris
5.8LImportEater said:
Ok, I have done some searching and I am still not sure of the answer to my question.
I have a HERM 100. I broke the screen on accident, but it was having the WSOD problem anyway. I still love the phone and I am trying to fix it.
First question is I have the screen with the P/N HTC60H00037-01M. I have looked several places on ebay, and the only ones I can find selling this exact screen are almost 2 times as expensive. Most if not all the others are saying this screen will work HTC60H00037-00M
Here are the links
The cheaper one with -00M on the end in one of the pictures.
The more expensive one with the EXACT same number as my screen in the pic.
Will the cheaper one work in my phone or is there a real difference between the two screens.
Oh, and does anyone know the best way to get a chip reflowed? I have been watching and reading the WSOD thread, and the only option that seems to fix the problem permanently. I am not able to do this myself I don't think, but if anyone has a surefire way to do this at home I am willing to listen, I just want my favorite phone back.
Chris
Click to expand...
Click to collapse
Well at least they are both made by Toppoly and that is the crucial thing because different manufacturers use different digitizer circuits:
http://forum.xda-developers.com/showpost.php?p=3372952&postcount=4
NB - This link is for reference only it was written for another Hermes owner who had bought a Hitachi part.
So I think you should be ok with the cheaper one - but I wouldn't put a 100% guarantee on that. (My understanding is that it should be ok though).
Obviously buy from a company that has put in writing that it works ok - just in case a return is needed.
Regarding reflowing the chip. You can experiment with an oven (though I wouldn't like to guess the temp or length of time) - and remove the plastic layer from the keys side. To be honest though, I'd look for a part on ebay or a device being parted out here - because if you try the oven method, you'll probably need a new part anyway
Mike
Ok, I got the cheaper one, and put the phone together. I am having a small problem. I think it is related to the WSOD issue now. After replacing it I put the phone together and it was working but the screen was very white. There were colors and objects on it but they were very hard to see, you had to look from an angle. After charging it a while and working with it (and thinking I screwed up again) I got the screen to work with some pressure on the right side. I am thinking that is the connection for the screen that you almost bend backwards. I am going to re examine that, and look locally for someone who will reflow my chip. This must be the problem.
At first I was not sure but now I have finally gotten a few minutes of non WSOD use out of it, so indeed the cheaper one WILL work.
Again, thanks mike, you are the man. I am certain I can find a dunked 8525 that will allow me to get my WSOD issue fixed.
-to sum up, the cheaper screen WILL work! good times.
Chris
Once upon a time when I woke up with a bad mood, I threw my phone away to stop the alarm.. Since that moment my I/O button which is on top of the phone (the one you switch the LCD's blacklight on and off) is hard to push.
The 'clicking-system' is (I think) dented in, and from the surface it actually looks like that too. It still works though, but you have to press really hard.
I asked at the local phone shop what my invoice would look like if I have it repaired by them and I found out it would be better to do it myself.
The problem is that although all the parts which are available on internet, this button is really hard to get. I can;t even find it on eBay (maybe I just search the wrong way).
Does anyone know where to get this, and if it hard to solder it (if needed)?
I am located in The Netherlands, so I prefer something that SHIPS to NL.
I found this (https://www.gsm4world.us/htc-touch-...lex-cable-lcd-key-ear-repair-d-02961_405.html) but I don't know if it will do the job.
Thank in advance guys!
Does anyone know?
gsm4world.us has almost full line of parts for the fuze/tp
Sorry I can't be of more use, but some searching on eBay will show that you can get the same part as on GSM4World a bit cheaper:
http://cgi.ebay.co.uk/HTC-TOUCH-PRO...Accessories?hash=item1c0ce8e08a#ht_2173wt_939
Edit: Actually, I'm not convinced that the part you suggested is the one you need. I think you should hold off buying anything until someone can tell you for certain which is best.
Power button
ewaldvk said:
Once upon a time when I woke up with a bad mood, I threw my phone away to stop the alarm.. Since that moment my I/O button which is on top of the phone (the one you switch the LCD's blacklight on and off) is hard to push.
The 'clicking-system' is (I think) dented in, and from the surface it actually looks like that too. It still works though, but you have to press really hard.
I asked at the local phone shop what my invoice would look like if I have it repaired by them and I found out it would be better to do it myself.
The problem is that although all the parts which are available on internet, this button is really hard to get. I can;t even find it on eBay (maybe I just search the wrong way).
Does anyone know where to get this, and if it hard to solder it (if needed)?
I am located in The Netherlands, so I prefer something that SHIPS to NL.
I found this (https://www.gsm4world.us/htc-touch-...lex-cable-lcd-key-ear-repair-d-02961_405.html) but I don't know if it will do the job.
Thank in advance guys!
Click to expand...
Click to collapse
Hi, Recently my Touch pro's motherboard gone dead.
Like yours HTC service center gave me estimate equal of new device so i listed parts to help others.
If your device is still facing the same problem please PM me with problem & picture, it will help us to decide which part you actually need.
The link posted by you is whole switching system, but i believe you just need plastic part of power button