Ever since i have upgraded to Helmi's Rom and press the headset button i get the beep in my ear as normal, at this point i used to say "call and a name and work Etc.." and the call would be placed. But now since the ROM Upgrade i press the button i hear the beep in my ear then the sound dissapears from my ear and the phone beep to prompt me to say something, please can anyone advise me on what to do.
I used to be able to say "Play music" and i would hear the response in my headset and then the music would play through the headset, but it doesn't now it play through the phone speaker.
I am using MS VC 1.6
Also i would like the ringtone to sound on the Blutooth headset (Motorola H605) instead of the normal headset tone i know the headset supports the handsfree profile and it is set to Hands Free in the bluetooth settings, in fact this is the only choice i get.
Any help would be appreciated.
Richard
ricmoo2004 said:
Ever since i have upgraded to Helmi's Rom and press the headset button i get the beep in my ear as normal, at this point i used to say "call and a name and work Etc.." and the call would be placed. But now since the ROM Upgrade i press the button i hear the beep in my ear then the sound dissapears from my ear and the phone beep to prompt me to say something, please can anyone advise me on what to do.
I used to be able to say "Play music" and i would hear the response in my headset and then the music would play through the headset, but it doesn't now it play through the phone speaker.
I am using MS VC 1.6
Also i would like the ringtone to sound on the Blutooth headset (Motorola H605) instead of the normal headset tone i know the headset supports the handsfree profile and it is set to Hands Free in the bluetooth settings, in fact this is the only choice i get.
Any help would be appreciated.
Richard
Click to expand...
Click to collapse
Not sure I can be much help except to reassure you that I also have the same set up and it works fine (Helmi's AKU3.5 + MSVC1.6 UK). Have you checked the setting to use (settings>Voice command> 2nd 0option)?
Mav
mavrik64 said:
(settings>Voice command> 2nd 0option)?
Mav
Click to expand...
Click to collapse
I am not sure what you mean here what is the 2nd option, and can you confirm you have the same headset and does the ringtone play through it?
Thanks for your help
ricmoo2004 said:
I am not sure what you mean here what is the 2nd option, and can you confirm you have the same headset and does the ringtone play through it?
Thanks for your help
Click to expand...
Click to collapse
Sorry mate, I was in a rush earlier.
Settings>Voice command>notifications then select the option:
"Speak notifications if bluetooth hands free is available"
You could use the first option:
"Speak notifications using bluetooth hands free only."
Sadly my hands free is a Motorola H300 only, and yes, it plays the ringtone in my ear and tells me who is calling if they are in my contacts list )
Regards
Mav
Related
hello, everyone:
anybody know is there is any possibility to transfer phone call from bluetooth headset to Xda II, if I already use bluetooth headset to pickup phone :?:
Thanks
Have you tried clicking the headphone icon in the top status bar?
when a call comes into the phone, a dialog box pops up, allowing you to transfer the call to the phone. how long this stays there i do not know. the other option is to turn on the speaker phone by holding down the green button.
hope this helps
Smiley
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
when I pick up phone, I don't have "headphone icon"
I guess that because I install "Pocket Bluetooth Tools" software
so maybe problem is the Pocket Bluetooth Tools
anyway, Thanks~
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Biso007 said:
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Click to expand...
Click to collapse
Thanks, I try this solution in my SORRYEricsson HBH-65 Headset, it not work, just can turn off my Headset.
Ha Ha~
I agree about the SE HBH 35 poor flexibilitity with my Qtek 2020. But as most of the "Blue tooth blues" regarding the XDA II, it's in part to HTC/M$ blame, since the same headset does an impressive job with my SE T-68 phone: voice dialing, call transfer to/from head set, head set incoming caller voice ID, etc.
So I keep thinking that BT is the worst part of the XDA II.
:evil:
BRosenow said:
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
Click to expand...
Click to collapse
And to trasfer the call from Phone to Headset? Is it possible?
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
BRosenow said:
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
Click to expand...
Click to collapse
Ok Thankx
Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
I actually had an oportunity to try out the voice levels and sound is awful! I also tried to connect it to my SE T610 and it refused and it did the same when I tried to connect it to my Toshiba M200 tablet PC as in both cases it never asked for the passkey...
I am begining to think that they must be faulty??
But becuase I have never had a BT headset before so I'm not sure if I am doing something stupid!
Andy
I have managed to try a SE BT headset with my MDA Pro and it did work and activate voice command. So it would seem that the headset is faulty. Does anyone have any ideas before I send it back?
Andy
Please!! Is there anyone here who can comment on whether they think these are broken or if I am just incompetent!
If they are broken then I need to send them back really soon...
FWIW, my Jabra BT330 and the SE HBH-662 just need a single quick click to activate the voice dial, but these Plantronics Pulsar 590A things I just got (which are fandabidosi by the way!) need a prolonged press to do the same.
Have you tried keeping your finger on the button for a while?
Ferg.
andykemp said:
Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
Click to expand...
Click to collapse
Just looked at the instructions for the bluetake i-phone (bt450rx),
(got them myself for xmas)
and it does not say that you can connect to the phone for voice control,
however you should be able to hang up from the headset.
i have got the k-jam (wizard) and can dial from the k-jam and hangup from the headset.
voice control may not be available because the new bluetooth stereo headset's are ready for AVRCP (Audio Video Remote Control Profile).
the older bluetake headset bt420rx can be used for voice control but do not have AVRCP function.
I hope i am wrong, but it may be the answer you have not been looking for.
Hmm... That sounds bad...
I only have a few days left to return it and don't know whether to get a replacement or to go for a different headset?
i like the idea of being able to play/pause/f-foward/rewind via the headset(when bt v2 upgrade is available), because music playback is more important to me than voice dial.
of course if you can send it back, then perhaps just wait until bt v2 is available, and then buy a headset for the uses you require it for.(wish there was an emotion with cross eyes) LOL
I know what you mean but I would still be able to use voice command!!
Does anyone else have the 450Rx and a universal and could test it for me?
if you do prove me wrong (and i hope you do) please let me know.
answering this problem further,
the bluetake i-phono mini headset cannot be used for voice command,
however the motorola ht820 can be used for voice control.
Had similar issues with my headset (not the same type). In the end, I had enable secure mode on the universal, pair the devices, select serial port and then immediately initiate the voice dial, otherwise it didn't work.
Gareth
I decided to play it safe and returned it back to Expansys for a refund. When someone else gets a set of stereo headphones and A2DP is out... and crucially they can confirm it works! Then I'll buy a new one!
Cheers
Andy
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
you may have already tried this, but just in case you haven't,
install and run the three files for either "bt off", "bt on", or "bt toggle",
this will switch all audio to the bt headset or away,
of course quality is not good, but at least no cables.
ps. if the headset is switch off and you put bt on, you will get an on screen error message.
aliendad said:
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
Click to expand...
Click to collapse
Do they come with this cable as standard?
EDIT: Did a search, and they do.... might just buy them now and sell my Sony EX-71's.... would they we at least the same in terms of sound quality? It's the thing people talk about least with these devices!
So lemme see if I got this right.... even before I get A2DP installed on my Exec, I can listen to perfect music using the cable, and also use the hphones as a bluetooth headset as well? Will the music still pause etc when a call comes in?
Just bought a pair of HT820's on Ebay there.... £38, not too bad. Should get about £25-30 for two pairs of existing headphones, so well please.
I can pair and use my BT earpiece easily for the phone and to give commands. How can I hear an Audible book or Music from Windows media via my earpiece? I have the upgraded Rom on my Qtek 9000.
Thanks for any help.
This is a simple way to do so. Just change the registry value below.
HKLM/Software/OEM/voicecommand
Set the value of "launchapenable" from 1 to 0.
Once this is set, the default voice dial will not work anymore. Instead, when you press the button on your BT headset, it will re-direct all audio to the BT headset. Press it one more time, it will re-direct the audio back to the PPC speaker.
This works will all application including music, VoIP application (like SJPhone, Skype).
Wow...that works well. Thanks much.
I find that with my BT EARPIECE i can listen to music and watch movies with the sound coming out of th eearpiece and not the speakers. I have to press the button on the earpiece once, which makes the voice command start. I just close that and then the sound is now coming through the earpiece. No reg hack needed, plus i get to keep the voice command software usable for when needed!
Regards,
Colin.
techtalkonline said:
I find that with my BT EARPIECE i can listen to music and watch movies with the sound coming out of th eearpiece and not the speakers. I have to press the button on the earpiece once, which makes the voice command start. I just close that and then the sound is now coming through the earpiece. No reg hack needed, plus i get to keep the voice command software usable for when needed!
Regards,
Colin.
Click to expand...
Click to collapse
Doesn't the sound cut off after the voice commander program exits? I know mine does.
Hi,
Use the regisry hack and Vijay555 Volubilis with its AGON (audio gateway ON) or BTaudio (little app found on this forum or google. I can hear TomTom indications, music and every sound on my Uni with theses stuffs...
vapor said:
techtalkonline said:
I find that with my BT EARPIECE i can listen to music and watch movies with the sound coming out of th eearpiece and not the speakers. I have to press the button on the earpiece once, which makes the voice command start. I just close that and then the sound is now coming through the earpiece. No reg hack needed, plus i get to keep the voice command software usable for when needed!
Regards,
Colin.
Click to expand...
Click to collapse
Doesn't the sound cut off after the voice commander program exits? I know mine does.
Click to expand...
Click to collapse
Nope, not on mine anyhow. Once the voice command program exits, it leaves the sound on the BT headset. No hack needed here and i get to keep the voice command too. Works a charm!
techtalkonline said:
vapor said:
techtalkonline said:
I find that with my BT EARPIECE i can listen to music and watch movies with the sound coming out of th eearpiece and not the speakers. I have to press the button on the earpiece once, which makes the voice command start. I just close that and then the sound is now coming through the earpiece. No reg hack needed, plus i get to keep the voice command software usable for when needed!
Regards,
Colin.
Click to expand...
Click to collapse
Doesn't the sound cut off after the voice commander program exits? I know mine does.
Click to expand...
Click to collapse
Nope, not on mine anyhow. Once the voice command program exits, it leaves the sound on the BT headset. No hack needed here and i get to keep the voice command too. Works a charm!
Click to expand...
Click to collapse
could i know what ROM you are using and which BT headset as well?
I would also recommend Vijay555's Volubilis (search for it). A simple cab install and you can have all audio directed to BT headset by running the program. No hacks or anything needed
vapor said:
techtalkonline said:
vapor said:
techtalkonline said:
I find that with my BT EARPIECE i can listen to music and watch movies with the sound coming out of th eearpiece and not the speakers. I have to press the button on the earpiece once, which makes the voice command start. I just close that and then the sound is now coming through the earpiece. No reg hack needed, plus i get to keep the voice command software usable for when needed!
Regards,
Colin.
Click to expand...
Click to collapse
Doesn't the sound cut off after the voice commander program exits? I know mine does.
Click to expand...
Click to collapse
Nope, not on mine anyhow. Once the voice command program exits, it leaves the sound on the BT headset. No hack needed here and i get to keep the voice command too. Works a charm!
Click to expand...
Click to collapse
could i know what ROM you are using and which BT headset as well?
Click to expand...
Click to collapse
This is working on Lt.Cmdr.Ivan's AKU 3.2 BETA 8 ROM, found on these forums. The BT headset is just a generic unbranded one i got off eBay. Sorry i can't tell you much more.
Regards,
Colin.
I was wondering if it is possible to get the instructions from tomtom to come through my bt headset instead of my kjams internal speakers, i it is could someone PLEASE point me in the right direction, i have the bt headset paired and working but can not figure this out.
Search for and download BTaudio. That will put all audio through your headset. If you get a call though the ringtone might deafen you.
bittermormon said:
If you get a call though the ringtone might deafen you.
Click to expand...
Click to collapse
I'm not sure if most BT headsets are the same, but mine has a "Ringtone" of its own. Not really a ring tone but it makes noises, if that makes sense.
Anyway, if you have a headset that beeps, farts or makes any other noise, then setting the ringtone to off might be an idea.
To be honest, I have never really sussed the volume controls out on the wizard though, LOL.
The BTaudio app sends all the sounds through the headset. So if your phone rings you hear the phones ringtone rather than the headset ringtone. At least thats how it is on my MDA with a Plantronics 510. Anyway, you could just use somethign like phonealarm and have a seperate profile with a lower ringtone for when you're using tomtom.
Hi guys,
I have a question about BT headset.
I have a JABRA BT 8040 connected to my HD2. When my phone is ringing I still hear the same sound in BT headset( like ..turut-turut..) doesn't matter how the phone is ringing/what ringtone I using. I also using this headset with my workphone Nokia 3110c and on that I hear the same tone in BT like its coming from phone speaker.
Any idea where is the problem? Why can't hear the HD ring sound in my BT headset?
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
starstreak said:
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
Click to expand...
Click to collapse
How can I switch off the MSVC ??? couldn't find any option for that.
I have a Energy ROM and I just can't see that