Database Users

Have to restart phone to regain GPRS connetion

I Have to restart phone to regain GPRS connetion every now and then. I have radio version 1.01.00 and rom version 1.03.00 WWE. My provider is Vodafone in sweden.
If I go to flight mode and back to normal then I can connect to GPRS again. Should I uppgrade my I-Mate to get it to work? Any Ideas what to do?

I've heard of people with similar problems, you need to upgrade your Rom, if you wanna stay relatively safe, upgrade to:
Rom Version: 1.72.00WWE
U can get this from club imate

I'm afraid I can´t find the rom on the Imate Club site. But you belive my problem will be solved by uppgrading the rom right? I´ll have to search for it then. ;c) Thanks.

I sure don't see any version 1.72 on Club iMate at JAM Device Support. The latest available upgrade I see is:
Radio 1.01.00
ROM 1.03.143 WWE
Where do you see version 1.72?
Frank

I believe he's referring to the wrong device. 1.72 was for the I-Mate Pocket PC - not the Jam.

Ok. I have posted a case to Imate and they where about to send a file to correct the problem but I got an emty mail.

Imate support don't know what this is. I'm back on the hunt. Anybody else having the same problem with theirs? Please let me know in this thred

Sincere Apologies, I was in fact dreferring to the I-mate....didnt realise this thread was under magician

Got an ansver from Imate. They sent me an PDF file where they showed me how to set up the GPRS connection. The problem is, been there and done that. I’m totally lost here. Is it only me who has this problem with “magican” and Vodafone? (In Sweden). Frustrating! ;c(
Note: With my P800 and the same location and same SIM = no probem at all.

I have the exact same problem with Vodafone gprs in Sweden
Hi Robert
I have the exact same problem with GPRS. I am also a customer of Vodafone in Sweden. I have this problem regardless of the device I am using. I have been running Qtek 2020, 8010, 9090 and S100 (magician) devices with the same problem for quite a while now.
I have started to think that this is not a device problem. It is probably a problem with Vodafone GPRS. I have contacted their tech support a couple of times about this. So far we have tried disabling/reenabling GPRS on my account and switching to new Sim-cards. None of this has worked so far.
I am using their twin cards service switching between different phones, I am not sure if this has anything to do with the problem.
best regards
Christofer

Thanks a lot for giving me this feedback. I'll talk to Vodafone right away.

Solution: I know that Telia supports the magican device because they have them for sale. My solution was to call Telia and tell them that I wanted to use them instead. Its a covards solution but Imate blames Vodafone and Vodafone blames Imate.

I have an old Qtek1010 on Telia, and it is behaving just like your Magician on Vodaphone. Sometimes I have to actually remove the SIM and put it back in again to be able to reconnect.
Another question about the Magician and GPRS. I have read on a couple of forums that the Magician will not keep the GPRS connection alive when in "sleep mode". Is this true? If so I may have to quickly cancel my order...

bamse said:
Another question about the Magician and GPRS. I have read on a couple of forums that the Magician will not keep the GPRS connection alive when in "sleep mode". Is this true? If so I may have to quickly cancel my order...
Click to expand...
Click to collapse
My gprs connection seems to stay connected ok even when the machine is switched "off". I have an imate jam on o2 in the UK.
I don't know if it stays on forever because i tend to log off gprs so i can go on line through bluetooth.
Simon

This is really bad news. I thought that since Telia do have thoose phones for sale they should have tested them in the net. In that case I should start thinking of going back to my old P800 instead of changing provider.
I Wonder if there are someone in here who it works for in sweden. Please let me know.

I have several collegues who are not experiencing these problems with Qtek devices on Vodafone network. So it does not seem to be a general problem.

RobertDahlberg said:
This is really bad news. I thought that since Telia do have thoose phones for sale they should have tested them in the net. In that case I should start thinking of going back to my old P800 instead of changing provider.
I Wonder if there are someone in here who it works for in sweden. Please let me know.
Click to expand...
Click to collapse
I just talked to Telia today as my GPRS broke down totally and there was just nothing that would make it connect. The person I talked to was very helpful and professional and we managed to isolate the problem to my SIM card. Being a brand new SIM I received just two weeks ago I though that just anything but the SIM would be more probable. It was very evident though as my SIM would not work with GPRS in neither mine nor a colleauges phone but the colleauges SIM would work just fine in both.
My new SIM will arrive on monday, and then hopefully it will not be too long before my S100 arrives as well

Ok, thats somewhat god news. Then there is hope to accually use this expensive piece of toy as it is suppose to.

Some input…
I have a Qtek S100 and run it with Telia. Works just fine, never have to reset or remove the SIM. However, I have problem with the GPRS to disconnect when synchronized with my PC and when using the phone. Have heard that an app called GPRS Keep Alive would solve that problem, haven’t tried it yet.
// Johnny

Re: Some input…
Johnny said:
I have a Qtek S100 and run it with Telia. Works just fine, never have to reset or remove the SIM. However, I have problem with the GPRS to disconnect when synchronized with my PC and when using the phone. Have heard that an app called GPRS Keep Alive would solve that problem, haven’t tried it yet.
// Johnny
Click to expand...
Click to collapse
It will not. For two reasons:
1. There can only be one network connection at a time, and the activesync connection counts as a network connection (you can use network passthrough to use the activesync connection for network access from the PPC).
2. You can not have a GSM voice connection and an active GPRS connection simultaneously because they share the same radio hardware. Simultaneous GPRS and Voice would need two radios in the phone, and although it has been part of the GSM specification for quite some time there are no such device available on the consumer market yet.

Blackberry and i-mate JAM

Hi All
I'm in the uk and have an i-mate JAM which does just about everything I want - apart from Blackberry.
I've tried the v1.2 blackberry connect s/w from O2 on it - it loads and doesnt give any errors but doesnt generate a PIN, and doesnt display an IP address.
I've had blackberry enabled on my sim by vodafone (my provider) and Ive setup a new GPRS connection with the apn of blackberry.net
I can't seem to get the desktop software to talk to the jam either - and when I click on the 'start' button on the connect software on the JAM it attempts to connect and then just disconnects.
Any ideas anyone? I really want this to work - is there a workaround that anyone knows about?
Thanks
Will.

Let me know if you get this working. If it does I'll be straight down the shops to buy a Jam.

Hi, I`ve the same problem. German T-Mobile ROM and Blackberry Client from the blue angle (T-mobile Version). The blackberry client starts normaly, but it is not generatin a BB-Pin. It always says "Aufwartung" whatever this means. The IMEI is displayed correctly.
Has anyone an idea?
Petons

there is no desktop software for the non RIM blackberry devices, and your best alternative for instant email would be alwaysonmail.com until a client is released from RIM for use on the Magician.
rgds
Jim

Hi there
I beg to differ - I have a copy of the rim desktop software for activesync.
Its called 'Blackberry Activesync Configuration'.
Will.

Welcome to the club. A friend from a german ppc forum told me, we won't get any success, cause T-Mobile put BB in the ROM Upgrade just for MDA II & III. Even we have the CAB file, it will not work as long as someone here changes a responsible part in the registry. Just installing the CAB won't work.
But I don't understand T-Mobile. They would earn much more money (as they already do), if they would offer this service to MDAc users - and they are not less! So we may have to hope for an update...

MrMacMax said:
Welcome to the club. A friend from a german ppc forum told me, we won't get any success, cause T-Mobile put BB in the ROM Upgrade just for MDA II & III. Even we have the CAB file, it will not work as long as someone here changes a responsible part in the registry. Just installing the CAB won't work.
But I don't understand T-Mobile. They would earn much more money (as they already do), if they would offer this service to MDAc users - and they are not less! So we may have to hope for an update...
Click to expand...
Click to collapse
RIM refuse to provide support for BB on Magician, to carriers. No RIM support means no software ever.
Why? I dunno, they're canadian aren't they....
Maybe they got hit by a moose....

Problem with internet connection

Hi i don't succeed to connect anymore because after the attemps of hookup the line it send this error message : The modem for the answer is disconnected. Please help me
I would not like to have to proceed with an hard reset to avoid to lose all the formulations. Thanks

Nobody can help me ? Thanks

Well i dont know if this helps, but i had the same problem. Connection to the internet didnt worked probably and the modem arent available.
So i called O2 and asked if the service may be down but it wasnt their fault. I had top hard reset my device and it worked after that again. Yes i loosed all my software etc. but the modem vent back. So i didnt need to send it in for repairing. After I changed my ROM to iMate i never had this issue again (previous ROM O2 Shipping...).
I only can recommend to backup all what you need and do the hard reset, it will help.
Sorry for no better solution, but i guess you want your GPRS/UMTS/G3 Modem back to work :lol:
Greetings,
Falk

fgro said:
Well i dont know if this helps, but i had the same problem. Connection to the internet didnt worked probably and the modem arent available.
So i called O2 and asked if the service may be down but it wasnt their fault. I had top hard reset my device and it worked after that again. Yes i loosed all my software etc. but the modem vent back. So i didnt need to send it in for repairing. After I changed my ROM to iMate i never had this issue again (previous ROM O2 Shipping...).
I only can recommend to backup all what you need and do the hard reset, it will help.
Sorry for no better solution, but i guess you want your GPRS/UMTS/G3 Modem back to work :lol:
Greetings,
Falk
Click to expand...
Click to collapse
Hi and thank you for your reply. I've just done an HR but the modem still not work. Please help me. Thanks

Could you please post the "Entire" error message your connection buble produces to verify your issue? Meaning ... try to connect to your isp and then if it fails the buble shows a error message at top of your device.
Thanks.

fgro said:
Could you please post the "Entire" error message your connection buble produces to verify your issue? Meaning ... try to connect to your isp and then if it fails the buble shows a error message at top of your device.
Thanks.
Click to expand...
Click to collapse
Yes it try to connect at my isp and then it disconnect and at top of the device : Impossible to connect : The modem for the answer is disconnected !!! Thanks

I suppose you are trying to connect with a clean device (after hardware reset). For me it sounds that your modem is not proberly installed and the software having trouble to bind the modem. If you are using the original ROM i would suggest to change the device with your ISP, depending how old it is. If you dont get the device changed, try another ROM (iMate i suggest for you). More help i cant provide because my problem vent away after the hardware reset. :?

Please tell us the ROM, the operator you're using, and the APN.
This happens usually for a mis-configuration problem... and for Italians using TIM it happens when you config MMS after a successful internet configuration.
The MMS provider becomes the default internet provider and the APN are difefrent
Look at the message"connecting to ........." ? what?

sergiopi said:
Please tell us the ROM, the operator you're using, and the APN.
This happens usually for a mis-configuration problem... and for Italians using TIM it happens when you config MMS after a successful internet configuration.
The MMS provider becomes the default internet provider and the APN are difefrent
Look at the message"connecting to ........." ? what?
Click to expand...
Click to collapse
*sergiopi: it would be good if you guys compare the settings to reduce any misconfigurations as long you both have the same provider. Maybe a good Idea would be to post your settings in here, so deika95 could compare it to his settings, no :?: :idea:

sergiopi said:
Please tell us the ROM, the operator you're using, and the APN.
This happens usually for a mis-configuration problem... and for Italians using TIM it happens when you config MMS after a successful internet configuration.
The MMS provider becomes the default internet provider and the APN are difefrent
Look at the message"connecting to ........." ? what?
Click to expand...
Click to collapse
Hi Sergiopi, no i think that is an operator problem but it's strange because until yesterday it has worked. My operator is TRE and the apn is tre.it I try to connect directly from the formulations of connection. But the strange thing it's that with other operators it works fine !!!!

sounds like a misconfiguration problem, no need to exchange your device for that, just configure the right settings for your operator.

pof said:
sounds like a misconfiguration problem, no need to exchange your device for that, just configure the right settings for your operator.
Click to expand...
Click to collapse
Also I think so but the strange thing is that until yesterday it has work fine !!

I agree but there is something much better: I-Mate develop a multi-operator self configuration .cab only for Italy. Just install it, drop the sim in the socket, turn it on and....
Works only with I-mate IMEI's
Other are quite easy to config
As an example: with TIM just insert ibox.tin.it as APN in My ISP configuration and select GPRS UMTS as carrier...

sergiopi said:
I agree but there is something much better: I-Mate develop a multi-operator self configuration .cab only for Italy. Just install it, drop the sim in the socket, turn it on and....
Works only with I-mate IMEI's
Other are quite easy to config
As an example: with TIM just insert ibox.tin.it as APN in My ISP configuration and select GPRS UMTS as carrier...
Click to expand...
Click to collapse
Ok but where i can search an IMATE rom for the Tytn ?

deika95 said:
Ok but where i can search an IMATE rom for the Tytn ?
Click to expand...
Click to collapse
All available roms are here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
I recommend you to read the Hermes wiki before u start:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Read at least the hermes for beginners and upgrading FAQs.

Be carefull, I said I-mate IMEI and NOT I-Mate ROM...

sergiopi said:
Be carefull, I said I-mate IMEI and NOT I-Mate ROM...
Click to expand...
Click to collapse
However I don't want to change rom to avoid to lose the guarantee. To this point I believe that i have to bring it in assistance. However it's very strange that with TIM and WIND it works while with TRE it doesn't go. I have also asked if the parameters of connection were changed but they have told me that the apn is always tre.it

If you send to the service center and you say: "It works with TIM and WIND and isn't working with TRE..." :shock: this will be the first face and the second will be :lol:
Be sure: if works with TIM and WIND ISN'T a TyTN technical problem!

sergiopi said:
If you send to the service center and you say: "It works with TIM and WIND and isn't working with TRE..." :shock: this will be the first face and the second will be :lol:
Be sure: if works with TIM and WIND ISN'T a TyTN technical problem!
Click to expand...
Click to collapse
And what kind of problem is this ???????? Thanks

Hi i have same problem with WIND isp.
The pc dont find a modem...
And when it found it the connection start but after some minut go in block...
the apn is right and the connection is the same that i use everyday with lg8310...

Getting the HTC TyTn to work with Exchange ActiveSync/DirectPush in Japan

Here is what I've done so far. Anyone with experience or anyone who has successfully gotten their setup to work, please chime in !
1. Install the JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe rom. Test. Works fine when connected by USB, syncs to any Exchange server with no problem.
However, When I try to sync to any Exchange Server or a different Exchange server through the GPRS connection, it sits on "Synchronizing folders", then "Looking for Changes" and finally after a few minutes of doing nothing, it just gives up and goes back to "Waiting for network".
2. As a test, I've tried to install a different ROM. This time ME_DT_WWE_1182553_106_10303_Ship.exe. Now when I try to connect to the GPRS connection, it retries the dial twice, then it "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason. Check your connection settings, etc.". This is after installing the SoftBank extended ROM and doing a hard reset, which worked fine for the previous i-mate ROM.
Anyone have any suggestions or ideas?
logimob

Wireless OK
After doing some more testing, and changing back to the original i-mate ROM, it seems to sync to Exchange just fine using a Wireless connection.
However going back to GPRS, and it's back to doing exactly the same "synchronising folders"/"looking for changes".
To this date, I have never had a successful GPRS sync - has anyone else?

Japan users?
There are no Japan users with SoftBank GPRS ActiveSync working....?

Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)

Fantastic, I'll try to install the rom at www.dopodasia.com/download/HER_DopodAsia_1237074_1060010_WWE_SHIP.exe
and see how I go. Thanks very much for your help and ideas.
Sorry to hear about your sick HTC Hermes!
logimob
Daimaou said:
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Click to expand...
Click to collapse

After flashing the Hermes with the new Dopod image, it keeps giving me a
Network Wizard error.
I tried adding the open.softbank.ne.jp settings, but it didn't work.
Then I replaced the Extended ROM with the Softbank Extended ROM. Then the settings for SoftBank were automatically configured - but don't work. It says "the current connection cannot be used for your request". Also, the network wizard comes up every soft reset and says "Your current operator (44020) is not supported. You should obtain an update from your device vendor".
This is kind of confusing - do you have any advice? Did you use the Extended ROM as it was?
Thanks very much for your help

"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...

Hi there,
Thanks for your reply. I've been messing around on this all night/all day again, and I've made some slow painful progress!
Firstly, I'm glad you had the same problem. Now I'm reassured that the problems are not related.
Next up, I've been trying to get the internet working. I managed to get it to connect before, but whenever I tried to access any site through IE, I got the error "エラーが発生しました。リクエストが不正です。 wj46000e".
I have since done a few hard-resets, and now it doesn't connect, despite me putting in the connection details 10's of times. I now get the error "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason"
Did you ever have these kinds of problems?
What kind of extended rom are you using? I just copied and pasted the whole Softbank Extended ROM, which worked perfectly on the JASJAM ROM.
If you have any ideas, I'd be really grateful.
Thanks very much
Daimaou said:
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Click to expand...
Click to collapse

Ok so this stuff
エラーが発生しました。リクエストが不正です。 wj46000e
I also get this error while ago... actually the first time I had my X01HT and with the Japanese ROM.
I really do not know what is going on with your device, I just hardreset my HTC Universal and put ALL the setting by hands, NO cab from crap Softbank, and it WORKS !
We should maybe meet one day, and try to let me see your device...

Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.

logimob said:
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
Click to expand...
Click to collapse
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise

Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Daimaou said:
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Click to expand...
Click to collapse

I just tried installing the other Dopod ROM - with exactly the same results. "cannot connect for an unknown reason". This same stuff worked perfectly on the JASJAM ROM, so I am starting to think these problems are somehow ROM related.
Where did you get your ROM from again?

logimob said:
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Click to expand...
Click to collapse
This is a Rom for my universal, not my Hermes, My Hermes with a Dopod rom will be sent back to me today. And since my wife want to use the Japanese X01HT I didn't flash it to US... anyway let's meet and check this out.

Guys, are you using the standard Softbank PC Site Direct connection?
If so, you'll never get Exchange Activesync working unless you uncheck the box for "This server requires SSL" AND the Exchange administrator has configured the system to allow non-SSL connections.
Softbank's "open.softbank.ne.jp" connection is anything BUT open. They are doing port blocking and currently appear to only allow port 80, 25, 110 unless you use Pocket IE. This means that ActiveSync and most IM applications fail.
Softbank is reported to say that they plan to begin supporting Exchange ActiveSync "sometime in December" - until then, the port is closed and there is nothing you can do to make it work.
The workaround is to use [email protected] (but this can get very expensive). [email protected] does not have any port blocking.

Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.

I will die and rot away before these bastards open up SSL...
hguabmur said:
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
Click to expand...
Click to collapse
I have been looking through the Japanese sites as well but haven't seen anything. I just keep testing every day. Frigging bastards... I told my Exchange and networking team in the US about it and they had never heard of a Windows Mobile device that was blocked from syncing with Exchange SSL over the wireless.
I have a friend in Korea though with a Samsung WM5 device - his works with Exchange but other ports are blocked so he can't use IM apps. So Japan mobile providers are even more backwards than in Korea.

Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.

hiroshiy said:
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
Click to expand...
Click to collapse
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!

khammo01 said:
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
Click to expand...
Click to collapse
Glad to hear it worked. Now my interest is how Softbank is going to treat PC users trying to use X01HT as a wireless modem. I personally hope they provide unlimited usage for $80-$90 per month... (after April)

calls disconnect all the time ..help plzz :(

hi there
this Dr.Samarrai from Egypt
i have my tytn 1 WM 5 for about 6 month now, and since then i have this problem,the calls either incoming or outgoing disconnet most the time
its rare if a phone call didnt disconnect
when i asked my tytn provider by the phone he said its propably from the network it self.
i called the network provider "vodaphone" they introduced 3G broadband to their service recently here in egypt, and they said they cant find any problem and i should change the mobile as a test to see if that will happen also.
but i have my suspesion about that " U " icon and the "G" one
i feel its related to them as mostly they seem to be changing from one to another during the disconnection, i dont know if during the call or befor it ir what .. or may be im mistaken !
i dont know what to do
format my tytn ? i did that and didnt help
change the mobile to another 3G mobile to test the network ?
call my HTC provider again ?
please any one help me
i asked the HTC provider for WM 6 thinking that the new software might solve that problem ,but they don't have it
i said but on the net there is alot of WM 6 for tytn , they said its for Urope version not here
iam in egypt and my tytn language is english but arabic enabled , with both languages on the keyboard.
please i need help
me
i want those disconnections to stop
my rom version is 1.18.255.3
rom date 07/22/06
Radio version 1.03.0310
protocol version 32.34.7010.01H
Extrom version 1.18.255.114
thank you
dr.samarrai

read here, hope it will help you out
http://forum.xda-developers.com/showthread.php?t=356353&page=3

ok my friend i will try that and will get back to you
thanx

Dear Dr. Dr.Samarrai
change your Windows from 5 to 6 use TNT.SE, this was made by on of owr own proud guys, i really recommend it as it might help you in solving your issues.
below is a link to an Arabic web site than directly to TNT.SE can help you in solving most of you issues, or else search Google for TNT.SE and you ill find it
http://www.ce4arab.com/vb7/showthread.php?t=103750
if you have anything else send me a private message and I will send you my mob number for any other assistance, also keep in mind to read the guide of how to flash your mobile.
Regards
Mo