Hi,
My O2 Exec (bought from ebay) damaged the usb connector. Got it repaired once 6 months ago. Now got damaged again, sent off to the same company for warranty repairs.
They say the damage is extensive this time especially to the system board (which will need replacing for £150.00 plus vat) and they r unable to fix it fully.
Now it will charge through the connector but will not Activesync via cable.
I have got around the AS problem via bluetooth, but I am unable to upgrade the rom this way. Is there any other option or is the changing of sys board the only one? Is there a cheaper option than £150.00 plus vat?
Please help.
Thanx
Tunndoc
Related
I have an O2 XDAII that I'm using in the US with T-Mobile... and now the sync/power port at the bottom is hosed... it won't connect to either power or for data sync unless you hold the cable at a specific angle. This is not a problem with the connector since I have 1 cradle and 2 difference sync cables and its broke with all.
This sucks
I bought the XDAII off Ebay from another user less than a year ago (I don't know when the original purchase from O2 was)... can anyone tell me if there is a warranty, is it transferable and where/who I call to see if I can get this fixed.
Otherwise, anyone have any clues about how to fix it myself and/or where to get parts.
I downloaded that other service manual for the htc wizard 8125, but mine is the cingular one - that one posted is different ? my phone wont charge anymore, when I bought it, it didn't charge either one of the USB pins on the phone itself was bent, so I bent it back and it works now, but now it wont charge anymore and the battery is dead is there a way to replace just the chargin/pc connect usb portion of the phone? I wanted to look inside to see if I can solder a new connecter inside, thanks guys!
hi. is there someon in germany, austria or italy who is able to repair my
polaris?? the mini-usb connector is broken, I can not charge the battery or
get any connection.
I have found only one address who offer to repair the usb connector, but I do not want to send my polaris to USA to get the service.
please help if you have some tips or ideas.
thx
Sorry I can't help you, just wanted to say a had the same problem twice - fortunately my provider replaced the hardware without problems.
Good luck anyway!
Broken Mini USB
I just had this same problem with my Cruise. It is only 4 months old and I sent to HTC for warranty and they wanted to charge 400 to replace the motherboard and usb plug. They claimed it was abused. They need their heads examined.
HTC has bad customer service and warranty.
Hi Brunner, you might want to try http://www.mobilephonerepairs.co.uk/home.asp . They are based in London, UK and sending to/from Germany was no problem for me. Just mail to [email protected], explain your issue and ask for a repair price quote.
So far I have only bought a replacement LCD from them and not used their repair service - but will do so next week. Anyway, they were friendly and supportive, and the LCD arrived in good condition and well packaged. Overall a very good impression.
i have some expirience with HTC repair, and can say that the most problems in HTC are in main board - very unstable connections with chips and pcb.
try to tense unit left and right side while usb is connected.
one more - switch off unit (take off battery and pull in) and connect adapter - i am sure in this mode charging will go - this is separate chip doing this automaticly ,but when processor running can sw it off. Stay 1-2 hours and battery will go full.
thank you for your replies... I'll try to contatct the london adress (big thank to doctah).
to romensat: thank also for your , but it is so, that I am not able to connect the usb cable at all, because the little plastic peace into the connector is broken out an some pins are damaged.
regards
brunner
just curious: how did this end up?
Hi
I have a serious problem. While my athena was being charged with my car charger I saw smoke in the charger. I disconnected it from the athena but probably too late. Now the mini usb is totally dead: I cannot charge it or connect to the pc and the light around the joystick doesn't light up when I insert the cable into the mini usb. Now there's 20% of the battery left so soon I'll have to do sth about it.
My question is can it be fixed without sending it to the service? They keep it a horribly long time in my country.
I'd really appreciate any help,please
You can charge the battery with the Athena cradle, they are cheap in ebay and come with a battery so when the Athena battery is nearly empty you just swap with the one in the cradle.
To connect with the computer you can use a bluetooth dongle, it will work with activesinc files transfer etc
otherwise the only solution for the USB connector is send it for service and depending of the damage it may be either a easy patch or a new board if there is tracks damage
Good luck
Thanx for aome advice PBL1. I suspected that I can't fix it without having it sent to the service. I guess I'll wait and see what they do (it's still under guarantee) before I decide to buy the docking station as it is rather expensive for Polish conditions. On the other hand I've been thinking of buying it for some time already, perhaps it's high time I did it.
I just don't know how they will react to the Michy Prima ROM cause I have no means of flashing back to the factory one. Thanx again for the advice
I can tell you that the total cost to my docking station was £30 if I remember correctly, that included the postage and the battery, given the price of the battery alone, it was worthwhile because I consider essential to have a fully charged extra battery if I am somewhere without possibility to charge.
I believe You may downgrade the room by the miniSD card method, do a search around here, there several threads about upgrading the rom with that method, it is worth to consider since some body posted that he sent the athena for servicing with SPL 3.5 and HTC flashed the original rom without considering that it was the wrong SPL, basically they sent back the item to the customer with a black screen.
However if you have SPL3.5 and want to use the downgrader to go back to SPL1.2 or to the original SPL perhaps you may check with cmonex that it is possible with out risks.
If you are in SPL1.2 I don't think you should have any problem.
regards
Yes you're abolutely right about a spare battery and the docking station. I have already decided (have been thinking all day today) to buy both as constant charging is a bit annoying. As for downgrading I'll really have to search for a mini sd solution cause the htc service in Poland might not be really user friendly. BTW could you possibly send me a link to a place with docking stations at this price? In Poland it costs more or less $100 and on ebay you may find cheaper ones but with one usb slot not two.
There you got
http://cgi.ebay.co.uk/HTC-X7500-Adv...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Note: these do not include battery, at the time I got it they offered the extra battery in the package ( it was a wile ago), if I remember correctly the cheapest battery at the time seemed to run at £24 today it looks that you can find them must cheaper.
Note 2: since you USB connection is dead you can use the cradle for extra battery charge, VGA and USB host (external memory storage devices such as drives,card readers) I didn't try external keyboards mouses and such but they should work.
but you cannot use the USB for communication with your computer (activesink, USB to PC....) because the cradle use the normal micro USB for those, for those you can use Bluetooth as explained early but of course that is not good for rom flashing
I wouldn't suggest using that car charger anymore. If its under warranty, you'll definitely want to reflash the original ROM. Whatever you do, don't try to flash a ROM or downgrade your SPL using a bluetooth dongle
Hi
I have just received the cradle plus an extra battery, there asre still some cheep offers on ebay.
Now, as Weaselcossey says I have to flash the oryginal ROM via mini SD card. J've been searching this place but couldn' find an easy step by step instruction, expecially how to extract the .nbh file from the exe file thet the oryginal ROM is in. Does any one lnow some links?
I never done myself but perhaps you could try this?
http://forum.xda-developers.com/showthread.php?t=312394
I'm going to try it out just now. But anyway it's kind of hard for me to part with my athena. That's why I've been waiting with giving it to the service, especially now wwith 2 batteries and the cradle. By the way there's also a nice mains charger on Ebay which Iwill probably buy soon: http://cgi.ebay.pl/O502-Desktop-battery-charger-for-HTC-Advantage-X7500_W0QQitemZ260138961370QQcmdZViewItem?hash=item260138961370&_trkparms=72%3A1399%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
PPC Techs repaired my HTC Universal when the USB connector broke, give them a try:
http://www.ppctechs.com/HTC-Advantage_895/repairs.htm
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Sorry, I forgot to check your location... HTC might have a repair center in Europe...
dieterpapa said:
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Click to expand...
Click to collapse
i don't know how it works with "The Phone warehouse" but here in the uk their parent company Carphone Warehouse have usually a flat fee for repairs, maybe ask The Phone Warehouse what they might charge ?
I think you can open and try to solder usb pin on your own.
its should not be that difficult task.
I have done this with my Motoming
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
dieterpapa said:
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
Click to expand...
Click to collapse
do it if you can as if you solder wrong pins than there would be a problem
and word impossible itself says i m possibles
Bad luck
dieterpapa said:
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
Click to expand...
Click to collapse
As a temp setup, why not get a docking base. they normally have a battery charging on them too. Keep you going until you find a repairer. they come up on ebay
Jay
.......Or THIS even?