Hi, there... have installed now the 1.6 version of voice command... the accustic output works now...
but de devices hangs up sometimes when i click on the green phone button ...
only reset helps...
all the same if vgahack is in windows folder or not...
please help... we getting mad...!!
Related
Hi all,
I did the bigstorage and my qtek (which is excellent) but the problem is that voice command didn't work anymore. So i uninstalled it but impossible to instal it now on my Qtek. It stops during the installation and says "Microsoft Voice Command hadn't been installed. Start the installation program again" or something like that (it is written in french..)
Maybe anybody can help me to resolve my problem (without doing a hard reset...)
Thank you
I had the same problem with Microsoft Voice Command 1.0, I just done and uninstall and installed Microsoft Voice Command 1.5 and worked fine
Brian
1.5 works fine over here as wel!
brian colston said:
I had the same problem with Microsoft Voice Command 1.0, I just done and uninstall and installed Microsoft Voice Command 1.5 and worked fine
Brian
Click to expand...
Click to collapse
That is what i did (i installed the 1.0 and uninstalled it) but the same problem...
Have a problem, I´m not able to install MS voice command on my 9100.
No problem with S100 runnin W2003.
But Is it it compatible with w2005?
Every time I try to do this is says: cannot install.
Why?
Please help, really want it on my 9100!
which version of voice command are you trying to install?
1.0, and then upgrade to 1.5..
That´s the only files I have. But I cannot get 1.0 to work, so its pretty hard to upgrade to 1.5...
But it worked to do this on S100
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
cnegron said:
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
Click to expand...
Click to collapse
Thx so much.. had to install, uninstall about 30 times, but now it works!!
Txh!
Hi!
I've tried voice command 1.5 on a qtek 9100 and it is really slowing everything down so much I had to turn it off. Starting programs, switching between them and using any program is a real pain with Voice Command enabled :-(
Does any of you have the same problem?
Regards,
// aste - writing this on the phone
Sorry no problem for me on a Qtek 9100...
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better. Only problem is on soft rest it says voice command cannot be found and you have trouble removing the warning box it sticks around for ages. When installing it also says...won't work properl on storage card, put on phone or something, but it works just fine.
monkeyphonix said:
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better.
Click to expand...
Click to collapse
I've got it installed on my Vario (on the phone) and it's not slowing it down at all.
Odd...
Cheers,
AJ
hello i tried to install voice command 1.5 and after installation, when it try to open it say error try to close and re-open voice command
- it automaticly install itself on the windows button
any suggession please
sorry for my english im french
Thank you
Bonjour,
Voice command 1.5 is not compatible with Herald's WM5 build. Use version 1.6 and remap your buttons as needed (start > settings > buttons).
hey Merci beaucoup
i did install 1.6 and it look like the micro is not high enought ,i recognise only a few contact , i would say 1 out of 10???
i did change the value in microphone to see
I would uninstall it and reinstall....it works flawless on mine...
Hi guys !!
i've tried installing microsoft voice command on my Trinity, but i seem to get a message..." Voice command has encountered an error , please try restarting voice command". any idea what's going on?
I already have cyberon voice command on my PPc by default ! could this be the problem..if so how can i solve it?
Please help !!
Ok..so first of all thanks for clicking on my thread.I hope somebody can help me flash a rom.I can't post the link because I'm new....I added a text file with the link(yes, it's on xda)
Post #9 describes a process of flashing this rom.
My device: HW6915 vG.39 G4(flash chip)
I am having trouble with this step pdocwrite spl -n0 -b 0x20000 0 0x80000.
Yes I know what the bootloader is and I know how to get into it.So after I connect the device via usb(while in BL mode) i run the command mentioned above.The problem is that nothing happens(screenshot included),it just stays at the same command and does not progress at all.CPU usage is little to none.And if I do try to flash the rom anyway the progress bar on sable_RUU gets stuck at 1% and after a few minutes gives an error.I tried this on XP 32 and on 7 64.
Yes, this is my first post, so take it easy.
Thanks for any help.
hello. i have the same problem but my sable ruu progress bar freezes at 51% and then pop up error:201. help?
For you it's stuck at 51% because you also flashed the bootloader(CEBL.nbf).I chose not to as it's optional.Even so I'm still stuck on the original problem.
Anybody know the answer to this?
my problem is identical. i am also having trouble with pdocwrite spl -n0 -b 0x20000 0 0x80000.after i run the command nothing happens,it just stays at the same command and does not progress at all as in your case. then when i run sable_ruu it freezes at 51%
did you try...
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Spiaatie said:
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Click to expand...
Click to collapse
Ok it works thanks guys for all the help.
Will report back to your thread and tell you about my findings
Thanks,appreciate it
Thanks from me too. On the first look wm 6.1 runs faster than 5.0 and gps does not work (igo 2006 plus-can not find gps com port).
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
jambongo said:
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
Click to expand...
Click to collapse
Yes the driver is indeed missing as this is ported from a hp without gps(i guess so anyway).First clue is that it doesn't include any base navigational software.
Second igo 8 reports ''gps driver not found''
n can you! help???
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
oussahoo said:
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
Click to expand...
Click to collapse
Beware dude this is higly experimental.There is no GPS for example.The rom is wm6.1.This is just for people who want to test and no it obviously not official.All files can be found at the link in the TEXT file I attached to my first post.
1.Connect your device to activesync(suggest a hard reset first,however it's optional)
2.Extract SPL vG.39.7z anywhere you want.
3.Run ''Command prompt'' (if using vista/7 RUN AS ADMINISTRATOR)
4.Enter this command pdocwrite spl -n0 -b 0x20000 0 0x80000 (WAIT UNTIL IT FINISHES).This command replaces a file in the ROM which allows you to flash ''non-original roms'' basically software CID unlocking which allows flashing of ''cooked roms''
5.You will get warnings on your hp regarding a dll file(itsutils.dll) PRESS YES
6.Put your device in bootloader mode.[hold the two buttons next to the joystick(the round thingy) and shortly tap the reset button with your stylus
7.Open activesync,go to connections and untick allow USB connections
8.Extract 6915_ENG.7z and run Sable_RUU
9.Press on the big ''Upgrade button''
10.There will be a progress bar, when it's done it should say something like '' Update finished !!''
11.Go back to activesync and re-tick allow USB connections
I wrote this for everybody who's got trouble flashing roms on their hw69xx.Yep I had this problem too.
This detailed enough?
jambongo said:
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
Click to expand...
Click to collapse
A question ....
but it happens to me the same error in XP and not out of the 1% resulting in the error 201
Can you help me!
hi
I have the hw6915
to me the procedure doesn't go
he/she writes me "client_initialize Fail Error 601"
a question: what I write on the Command Pront
thanks
for further information
the cell doesn't connect him to activesync
it is jammed on screens her/it USB - LOGO HP INVENT and in low vG.39
THANKS
@spiaatie
mine is in bootloader
however it doesn't connect him with Activesync
what do I have to do?
which procedure do I have to do?
thanks
can't program ipaq 6945
When ever I push upgrade button, it just hangs and afer a while I get the message:
client_getosver Fail !! Error :501
I'm using it on windows XP,
could someone help me!!!
Thanks!
rra_pn said:
client_getosver Fail !! Error :501
Click to expand...
Click to collapse
Did you install SPL?
Yes, I did de pdcowrite on command prompt, then it gave me the warning on my ipaq and then it finished.
After that I unticked the allow usb connections on active sync
then I press the two buttons next to the joystick and press the reset
I run sable
and then it does what i Posted
Thanks!