Hello,
got a smashed Hermes without Battery;
Can someone provide me with the Pinout of the Battery
or options on how to power the device without Battery?
thanks,
/ pit
Related
Hi all, I recently bought a second hand Exec without a battery
I don't want to buy a battery if the unit is faulty (there is a chance) If I plug the charger into the socket all I get is a red light
My question to all you Exec owners is- is this normal or should/will the unit work without the battery present.
Thanks in advance Grez
Hi grez
U need a batery to operate the exec when i take my battery out the same thing happens.
Hope this helps
Hi scotjen1,
To double check, if you remove the main battery and plug the charger in all you get is a red light. The unit will not power on using mains only.
If this is the case I will risk buying a battery.
Thanks for your help.
Grez
Hi guys, I think I need a replacement for the motherboard's battery (the little one soldered to the motherboard).
Do you know which model to get? Do I need a special battery?
Thanks in advance!!
...
this is a real problematic situation. i bought a i-mate branded himalaya a few months ago off ebay, i have no idea if it works. the charger port was completley desoldered from the mainboard.
so i spent 12bux to get an external batterycharge, which it appears my battery is now dead. refuses to get any voltage.
is there ANY way i can hax it to power on without hte battery. i can get the powerpins on temporarily, but i need to know if i can like short the battery pins together to use external power.
any ideas?
Hi guys, does anyone know the order of the pins under the battery cover for charging? my usb port is very close to death but I don't want to pay to get it fixed when i've got my upgrade in less than a month so I figure i'll just adapt a charger to charge via these.
Same here, bad usb port. I have looked everywhere trying to find out what voltage/polarity to apply to each of the 3 contacts under the battery cover, and even tried applying all possible combinations of polarities to the 3 contacts with a low voltage, all to no avail. My best advice to you, which has worked very well for me, is to buy an external battery charger and an extra battery. I got the battery and charger for 16 usd for both from ebay and they work fine. Good luck to you
someone must know the pinout, I mean the phone is so old someone must have played with it successfully.
Well, you can't just put power to the battery directly, it probebly will explode (Li-ion).
You can buy an external charger (look on ebay or phone shops) or fix the power part of the usb port:
http://forum.xda-developers.com/showthread.php?t=930412
Hello Team,
As my battery died and i dont want buy another without any kind of warranty that battery will work fine i want to replace it with 2x 18650 battery.
I have question if someone from you did this before? how to connect them?
I saw that battery are connected parallel to power connector but between them i see 2 blue cables and i dont know for what they are used.
So please help me with this issue
Thanks!