Related
I have successfully installed and used Microsoft Voice Command 1.50.4333.21 on the i-mate K-JAM.
You must first disable Cyberon's Voice Speed Dial Daemon by deleting the SDaemon.lnk file in \Windows\Startup, then soft-reset.
Install Microsoft Voice Command normally to the main memory, ignoring the erroneous error message about file placement.
Reassign the Voice Speed Dial button to Voice Command and the Messaging button back to whatever you had last (likely the Messaging applet).
I tested it with Contacts, Digit Dial, Media Player, and Appointments, all successfully! It does not recognize Contacts on the SIM card - only those in the database.
I had to change a registry entry, since pressing the button calls the original Voice Dial Tag applet.
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\"\\Program Files\\Voice Command\\VoiceCmd.exe\""
Paste it as a .REG file and import it using Resco Explorer 2005.
But, bottom line: YES, IT ACTIVATES VOICE COMMAND OVER THE BLUETOOTH HEADSET.
hi buddy
this is good news, especially that it is possible to initiate the call from headset (and i guess it will work on my parrot ck3100 too then!). can't wait to have one - don't make me jealouse ;-)
cheers, lutz
Good job BTT!
Good Job!
I just applied the change and note the following of interest:
1. If you use voice-command to launch an application the audio remains redirected to the headset until you hit the button again.
2. (And this applies with the built-in package as well) If the device is in standby you get a pause, then static. No prompts occur and no voice commands are accepted.
Robert Harrold
Houston, TX
robinton said:
Good Job!
I just applied the change and note the following of interest:
1. If you use voice-command to launch an application the audio remains redirected to the headset until you hit the button again.
2. (And this applies with the built-in package as well) If the device is in standby you get a pause, then static. No prompts occur and no voice commands are accepted.
Robert Harrold
Houston, TX
Click to expand...
Click to collapse
I have the same issue with all headsets that I've tried: Blusepoon AX, GG Telecom, Moto H500. People are reporting no issues with Sony Ericsson and JAbra :shock:
I am getting a similar problem on my Blutrek G2.
BT Voice Dial works once, first time I turn on my Blutooth headset. Here's my sequence:
1. I turn the G2 on and it locates the KJam.
2. I press the G2 button once, it opens the audio channel and I get the VC prompt.
3. I say the VC command and it peforms the request.
... but after that, I cannot get an audio channel to open up again...?
I have tried turning the G2 off and then on again, but still no audio when I press the G2 button. The only way I can get it to open an audio channel again is to soft re set the KJAM.
Any ideas on how to solve this one...?
Regards
Chris
Didn't we already discuss this?
http://forum.xda-developers.com/viewtopic.php?t=29837
I am having the same exact problem that cbrow51 is having except I am using a HS850 headset.
Any ideas?
Thanks
When I want to use voice dial I say the name of the person I want it to dial, then it repeats what I've said back at me. I find that really annoying for some reason. Is there a way to make it just dial without repeating what I've said first?
if ur using voice command u can uncheck the 'confirm' option but u may call the wrong person sometimes if u dont pronouce it clearly
where is the "confirm" option, I can't find it anywhere...
Only MS Voice Commander not the default WM5 one
devGOD said:
Only MS Voice Commander not the default WM5 one
Click to expand...
Click to collapse
There seems to be much confusion regarding Voice Dialing software. There are three versions:
CVD - Cyberon Voice Dial (comes installed on Cingular 8125 and some other WM5 Phones)
CVC - Cyberon Voice Commander (the Retail Version and big brother to CVD)
MSVC - Microsoft Voice Command
The low down on these (this is my opinion based on using all three)
CVD isn't worth what they charge for it (yes I know it's free)...
1. You have to specifically record voice tags for each contact.
2. It only does dialing, no PDA functionas included.
CVC is cheap at on $15.00 and has a couple of functions that are nice like reading SMS messages to you and OEM integration with your bluetooth headset but I don't like it because...
1. The initial delay and waiting for the voice to prompt you is just too long.
2. Voice recgonition is spotty.
MSVC is the luxury version of these programs. With a little hacking you can get it to play with your bluetooth headset (mostly). It is fairly quick to be ready for your voice command (just wait for the beep). Finally it has the best voice recgonition of the three. The downside of MSVC...
1. It costs $40.00 but I've been using it for almost a year (bought it from Handango when they e-mailed me a 20% off coupon) and it's worth every penny.
Bob
@ Kyphur
@ Kyphur
Thank you for that good and clear explanation. Always wondered the main differences.
I've owned my HTC Mogul for 5 days and have been keeping a list of questions or issues I have about the device. Sadly it has grown and grown. I've only owned it for 5 days, so it's possible that there's a setting I missed, but I have been through the menus many times.
I have done soft resets and hard resets (two soft keys plus reset key together). No third party software.
OUTLOOK EMAIL
activesync set to "as items arrive" for peak and off peak, direct push enabled but doesn't push new
messages to the phone. I'm using an activesync server with dp.
push doesn't work even when outlook is open, have to click send/rcv to get new msg.
closest I have come is once I got notified with alarm 10 minutes after email was sent. I have sound notify enabled for new emails. Don't know why it worked this one time and not the other 99%.
no setting to "send and receive at startup", even as an option?
Oultook email has locked up twice, had to do soft reset
INTERNET EXPLORER
IE has locked up twice, had to do soft reset
SOUNDS
no option to choose which email account to enable a sound notification for? So I have to get notified for all or none (not that notification works anyway, see above)
alarms don't go off if device in sleep mode, which is most of the time?
---
MISC.
blue/yellow light flash constantly, what purpose? Is the phone also an aircraft? why so bright?
Volume on the phone is too loud, even when turned all the way down (not the speakerphone volume). I guess that's better than the reverse, but why not let it be turned down to 0?
The whole point of a volume control is so people can adjust to the volume they want. Yesterday I was on the phone with Sprint (again), I had one of those foam earplugs in my left ear, then the included headphone bud on top of that and it was _still_ to loud. I work around fans all day, a room with huge computer systems and I'm probably half deaf from it.
---
PHONE
no setting to set # of rings before it goes to VM
can't use data and voice at the same time
---
PICTURE
no way to delete a pic while viewing? as in touch and hold for a menu to pop up (like IE) or even a delete option on the menu (while the pic is open) You have to "OK" out of the pic, then remember the file name to delete from the list.
---
PROGRAMS
progs. don't actually close when you X out, they stay running in the background. Have to go through 5 taps, then manually close them. No way to change this even as an option?
---
Keyboard backlight works 10% of the time. I have unchecked the "autosensor" box. Happens in a pitch black room also.
---
EVDO
I get ~450kbps in a speed test to dslreports.com. I know that's technically in sprint's advertised window for Rev0 "400-700 Kbps" but I'm squarely in the EVDO coverage area, not on a fringe or in the boonies.
Sprint is sending me a new phone because I know the backlight issue is a defect. But some of these things are just bad design.
nedworked said:
PHONE
no setting to set # of rings before it goes to VM
can't use data and voice at the same time
---
PICTURE
no way to delete a pic while viewing? as in touch and hold for a menu to pop up (like IE) or even a delete option on the menu (while the pic is open) You have to "OK" out of the pic, then remember the file name to delete from the list.
---
PROGRAMS
progs. don't actually close when you X out, they stay running in the background. Have to go through 5 taps, then manually close them. No way to change this even as an option?
Click to expand...
Click to collapse
Rings before going to voice mail....that is a setting in your voice mail box... I don't know of ANY Sprint phone that has an "in phone" setting for that....
Closing programs, search the forum for HTC X-BUTTON 2.0.
Delete a picture while viewing in the default viewer, click and hold, then select DELETE......
Anthony thanks for your response. I just dialed vm and I did not find any option in any of the menus to set # of rings before calls go to vm.
When I tap/hold the screen while viewing a pic with default viewer, nothing happens.
I know there are third party apps so thanks for the info on x-button, but I'm going to wait for my 2nd Mogul to arrive before taking time to research and install them.
# of rings to voice mail
that is a service from your provider.... for me it's *93"#"
"#" is the number or rings.... i think it's 9... call your provider and ask them
pbucc said:
that is a service from your provider.... for me it's *93"#"
"#" is the number or rings.... i think it's 9... call your provider and ask them
Click to expand...
Click to collapse
so, your first post is bumping something 5 months old?
Ok, I see three voice dialing applications we can use (please add any others that work!):
1.) Cyberon Voice Speed Dial
2.) Cyberon Voice Commander
3.) Microsoft Voice Command
I've searched the forums and came up with a wealth of conflicting and often outdated information. I'd like a concise thread here detailing the differences between them, how they work on the Titan, and any hacks needed to get them to work, in say the latest DCD ROM or WinMo 6.1.
Here are the things I think I know (In italics) and the things I've got questions on (in bold). Certainly feel free to add opinion on functionality, or additional comparison information, or please correct anything that I thought that was wrong, etc etc etc! Thanks! Then I'll update my original post here so we can have a nice comparison thread...
1.) Cyberon Voice Speed Dial
Is what the phone comes with stock
Allows speed dialing only - no system control
Requires voice tagging of each contact
Does not require any hacks to work
Does not do any Text to Speech.
2.) Cyberon Voice Commander
Allows system control
Does not require training / tagging.
Does it do Text to Speech? Can it do Caller ID Announcement, or SMS Announcement?
Does it require any hacks to work?
Can you activate voice recognition from bluetooth headset?
3.) Microsoft Voice Command
Allows system control
Does not require training / tagging.
Requires hack to get caller ID announcement to work
Does Text to Speech for Caller ID and SMS senders announcement
Can you activate voice recognition from bluetooth headset?
All I can answer for is MSVC since it's what I use. First off, it does NOT require a hack to get caller ID announcement to work. All I had to do was check off a box in the settings and it announces the caller ID information in my ear whenever the phone rings.
Second, yes, the voice recognition works fine from the bluetooth headset. Just hit the headset's action button, wait for the MSVC beep, and speak your command. Everything can be handled that way, and it does it very well.
I 2nd the MCVC... Only drawback for me is its amount of memory that it uses in the background. I use Garmin Mobile XT and it fails to start a lot of the time because of lack of memory. I either need to do a soft reset or reclaim RAM with SKTools... Not a huge deal, but kind of frustrating. Love the functionality of it, though. Works great!
MSVC gets my vote also - just wish the idiots at slorizon would release 6.1 so I can re-install it with working confirmations.
I'm planning on using MSVC once again when I upgrade to the new ROM.
MSVC with MIcrosoft MObile 6.1
I have just gotten started on the Sprint Mogul and have upgraded to MS Mobile 6.1 and installed MSVC V1.6. I can tell you that there are some major issues with this combination.
1. I get the ringtone in the bluetooth earpiece and the phone doesn't ring.
2. The earpiece button does nothing,
3. Voice Command only brings up the contact list but doesn't dial the number.
I have talked to a guru at my local sprint and he has experienced the same problems with another phone of the same type. I'm thinking of reverting to MSMO 6.0 to see if things are different.
If you have any other sources that address these issues, I will take all the help I can get.
Thanks.
greymatter said:
I 2nd the MCVC... Only drawback for me is its amount of memory that it uses in the background. I use Garmin Mobile XT and it fails to start a lot of the time because of lack of memory. I either need to do a soft reset or reclaim RAM with SKTools... Not a huge deal, but kind of frustrating. Love the functionality of it, though. Works great!
Click to expand...
Click to collapse
One tip on Voice Command, if you have a lot of media files, disable Media in the voice command settings. For me, Voice Command won't even start with it enabled. Saves quite a lot of memory to disable it.
Voice command 1.6 and Verizon XV6800 issues
I have tried for 3 days to locate a "fix" for using VC 1.6 on my verizon xv6800.
I use a PLT 150 and when i press the button to make a call Voice Speed Dial works. I read about and tried some registry edits but some edits did not "take" i tried but they did not work. I just wnat to know how to use Voice Command 1.6 to call my contacts.
Here is what i tried:
Use MS Voice Command 1.6 instead of the built-in Cyberon Voice Dialer
For those of you who would rather use MS Voice Command instead of the built-in Cyberon Voice Dialer (and who wouldn't...), try this tweak (courtesy of MobiltyToday). I've been using the XV 6800 with a Blue Parrot Truckers Bluetooth headset for about a week now, and it works great!
Installing Voice Command on Verizon XV6800
1. Cyberon's Voice Speed Dial software is embedded with the OS and not as an addon through the Extended ROM. The only way to disable it is to delete the shortcut in the \Windows\Start Menu as well as the SDDaemon.lnk file in the \Windows\Startup folder. Note: If you've already installed Voice Command - don't delete the Voice Command shortcut - just delete the SDDaemon.lnk. This points to the new software!
2. Install Microsoft Voice Command normally. You may be prompted with an erroneous error message saying it's going to install in Main which is fine. Just continue with the installation. Note: this didn't happen with me.
3. The installation will reassign the Messaging button to Voice Command, but you probably want to give that back to the Messaging or other favorite applet. Reassign the Voice Speed Dial button to launch Voice Command. Note: The XV 6800 doesn't have this button - Voice Command goes to the email button in the upper left - you can leave it there or change it with the buttons settings.
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\
Path = "\Program Files\Voice Command\VoiceCmd.exe"NOTE: Create the entry if it does not exist.
Clearing out the traces of Voice Speed Dial
1. In these registry locations:
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_ContextMenu
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_Tools
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Summary_ToolsRemove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
2. In this registry location:
HKEY_LOCAL_MACHINE\ControlPanelRemove this key entirely: VoiceTagCPL
3. In this registry location:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommandChange this value:
Path="\Program Files\Voice Command\VoiceCmd.exe"
(It probably points to SDDialer.exe now.)
4. In this folder: \Windows\Startup Remove this file: SDDaemon.lnk (you should have already done this if you followed the instructions above.
5. Reassign the Voice button in Buttons applet under Settings to Voice Command.
Now, soft-reset your device and that should do it. Cyberon's Voice Speed Dial is out of the picture. That is, until you hard reset, then it all comes back.
Can someone help? Thanks!
Finally Fixed!
Thanks to Daniel who posted his "fix" the registry edit above now works on my XV6800!!!
1. Open BT Voice Command Config from Programs. Uncheck XCSdm
2. I put in 2 strings under HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand
Default = "\Program Files\Voice Command\voicecmd.exe"
Path = "\Program Files\Voice Command\voicecmd.exe"
I put "" around the strings - and the voicecmd.exe is SMALL case voicecmd not VoiceCmd.exe
3. Deleted the other keys under VoiceCommand
4. deleted the BT headset pairing - the paired jawbone headset again... perfect.
I am trying to get this to work on my XV6800 but when I try to modify this reg entry:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\
Path="\Program Files\Voice Command\voicecmd.exe"
It does not stick. Here is a message I posted to the Q&A forum with more details. I think it has to do with some security policies being pushed down due to sync with Exchange... Any ideas for how I could work around this?
Hey!
I use a vx6800 with a stock 6.1 rom.
I installed several different builds of MSVC and the only one that worked without ANY mods or glitches is v1.6.192009
I purchased an older version that the bluetooth would not work, notifications would not work etc etc. So I did a little research and found this version that worked perfectly!
All I needed to do was to go to start >settings >voice speed dial >settings, and then disable voice speed dial.
Also under programs >voice speed dial switch, you can disable there too!
Most excellent! So simple yet so effective... Looks like disabling the voice speed dial was the piece I was missing. And here I was trying to modify registry entries. Silly me... By the way I am using v1.60.4622.0 (I'm Microsoft Internal so this should work with later versions as well!
Thanks for the help!
mike_mccrady said:
I have just gotten started on the Sprint Mogul and have upgraded to MS Mobile 6.1 and installed MSVC V1.6. I can tell you that there are some major issues with this combination.
1. I get the ringtone in the bluetooth earpiece and the phone doesn't ring.
2. The earpiece button does nothing,
3. Voice Command only brings up the contact list but doesn't dial the number.
I have talked to a guru at my local sprint and he has experienced the same problems with another phone of the same type. I'm thinking of reverting to MSMO 6.0 to see if things are different.
If you have any other sources that address these issues, I will take all the help I can get.
Thanks.
Click to expand...
Click to collapse
1. I get the same but it also anounces the caller ID as well. If you have the ear piece on it shouldn't matter it is when you leave the ear piece off and forget the phone is still using it. Doooh.
2. You have to hold the ear piece button down for like 2 seconds or more until you hear the second beep and you will see the microphone icon in the top task bar.
3. If you use the command CALL so in so, It should come back and say call so in so cell, home, work. Or just say call "so in so" cell and it will confirm you say yes and it should dial the number. If it doesn't then find the latest version and install that one.
What version are you using?
I installed several different builds of MSVC and the only one that worked without ANY mods or glitches is v1.6.192009...
I'm not sure if I should ask this question here or start a new thread. I have a stock HTC 6800 (small carrier, not sprint or verizon) out of the box running 6.0 and would like to purchase MSVC. From everything I have been able to read, some of you have it working properly and some don't. Is anyone running 6.0 without updated roms, etc., and have MSVC working properly?
Thanks!
Tim
I could not get it to work properly with 6.0
The 6.1 update fixed incompatability issues with MSVC.
I tried some of the hacks and reg adjustments but could never get it to work up to my standards.... There are notification fixes that doo work so you can make cand rec calls just fine but I couldn't get the bluetooth confirmation issue to work...
Thank you! I greatly appreciate the response!
Ok. I purchased MSVC and it is "partially" working, but no incoming anouncements, etc.
How/Where do I find version 1.6.192009 that was mentioned in previous post? I did a search but came up with zip...
I really need to have it working completely. When it snows I'm in a 15,000 lb. Loader doing snow removal and leave the house at 2:30/am. It would sure be nice to be able to decide "before" answering if I need to stop the loader to answer, or if its a text or e-mail. Particularily if I'm half way up a really nasty driveway...LOL
Thanks!
I need to correct my previous post. When MSVC is activated with my BT headset it recognizes the request (call work) then asks for confirmation but does not dial. Guess i was not a close as I thought. Any assistance would be greatly appreciated!
I have it working now..
I turned off the "annouce incoming caller" in settings, did a soft reset, and it started announcing incoming calls. It is also announcing text messages, e-mails, and calander reminders all via BT earpiece. Way Cool! At 3:00/am this morning while under a loader making minor repairs, it announced who was calling. Unfortunately, it was one of my drivers with another repair issue...
Thanks for the great site!!!
Tim
installed ms voice command on my mogul and it works as intended no issues.
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Voice cammand is great, Tellme not so much
Voice command, as you may have already learned, works great with no training. You can voice dial, control media playback, hear your next appointment, and have callers annouced through your BT. Absolutely essential for me while driving. It will not allow you to dictate texts however. Thats really the piece that I was hoping Tellme would fill in, but it just doesn't seem to work as advertised on their website. To be fair, I've never seen it used on a device that came with it installed. It might work like a champ on those handsets, but it's never worked at all for me.
EDIT: I see you can't edit the title of your post. . .
Voicecommand not announcing bluetooth?
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Voice Command
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
That's it.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Not sure. Making a folder with shortcuts to the setting might work, but personally I wouldn't think about moving that stuff from where it lives.
polera257 said:
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Click to expand...
Click to collapse
No set up needed other than ticking the option in the settings menu.
wlm said:
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
Click to expand...
Click to collapse
It is a download. Do a search and you will find plenty.
I can make the VC work on the phone just fine, but I have an ANT in the car, for BT.
When I try to talk with no car noise, or with car noise, the phone goes stupid, does nothing, well, beeps some kind of talk back, like dumb ass I did not understand you
Tried everything to get bluetooth voice announce
Crissg, I have checked the box to announce calls actually spent two days with Tmobile tech trying to get Voicecommand to announce over bluetooth but no luck. That is why I was wondering if you have this working on your phone. If so did you do any registry changes. I tried everything
Hi CRISSG,
Thanks - tried to locate it, but it's not there. Must be a download. Is the one you are using a WM app? IF so, where did you find it? There seem to be many apps - some with real problems, and I don't want to go that route!! HTC HD2, on Vodafone.. THANKS!!!!!!!
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
It came preinstalled
bigfry said:
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
Click to expand...
Click to collapse
Looks like the files are in the Windows directory of the device. I'm not educated enough to pull it out in a usable fashion. Have you checked the ROM threads? Possibly one of the chefs has already cabbed it up?
I just realized that I'm almost always the one doing the calling from the car, and I hadn't actually recieved a call on the new HD2 (while driving) to verify the annoucement function yet. I just tested it, and it is ringing in the s9 headset, but annoucement comes over the speaker. Interesting. Commands for calls and media and calendar are working fine. As soon as I can get my wife off her phone, I'll get her to text me while I've got the headset on to test that as well.
Edit: It plays the assigned sound for recieving a text over the headset, but is not announcing the message like it did on my Tilt. Sorry if I gave the impression that it was. Like I said, I use it every day, but I make way more calls than I recieve when I'm in the car. Now I'm with you guys wondering why we've lost funtions that we had before.
Edit #2 Was just in the car, and got a text. It was announced through my Jabra earpiece. So it might have something to do with the BT profile being used, as annoucements didn't work with the s9 that I use around the house.
No option of Voice Command in my T8585
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Regretfully in my HD2 , T8585, ROM: 1.48.405.2(71294), Manila:2.5.19211619.0
- there is no such option at all in the
above mentioned path: start, settings, menu, all settings, personal, voice command.
another HD2 n00b
I have been trying for a few days no to get voice set up. I too am UK with vodafone. No voice buit in. I have bought retail MS voice command 1.6 and it fails to install. Cyberon voice speed dial installs. The next problem I have is that, I want to be able to trigger voice calls vial my bluetooth headset. (plantronics 370 explorer) Neither this or my old Jawbone bt headset will trigger voice calls.
I really want to get the MS voice command to work as it looks great and ou don't need to train it. Any help really appreciated..
For all the uk users just do a Google search for microsoft msvc 1.6.21725
I am using this on my HD2 with no problems.
Announcements of callers doesn't work though.
Thats great thanks for this. Appeared to install fine. Not sure if it insatlled right though. I can find it in setting>other>voice command. Looks only to be settings in here. I can't get it to run or prompt for voice.
try pressing and holding the green send key
Thanks for this. I have a green "Talk" button when in phone. Pressing this or long press just call the last number.
The button on my Jawbone activate the voice, which is cool, but the button on the plantronics explorer still does nothing. I guess it is something incompatible with this. Typical eh as this is my favourite headset for out walking. It is great on a windy day.
xtacybyme said:
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Click to expand...
Click to collapse
What Voice Command Software came with the HD2? Which version of the phone are you referring to?