Hi
I have an XDA Exec, and as I am using it with our corporate email system (with Push email) our IT guys insist on the PDA locking after 15 minutes of non-use ... OK so far...
The problem I have is that I use my XDA as my SatNav as well, and this means that it often locks itself as I'm driving down the motorway!!
The option to change the timeout is greyed out, so I cannot change it via the normal user interface, so I guess I need to change some registry setting somewhere .... can any of you guys point me in the right direction???
Just a gentle nudge... this forum is buzzing at the moment!!!
It takes it's setting from your corporate policy, and every time you connect it will reset anything you change in your registry.
There is however a cab that specifically stops it locking while awake on external power, and auto lock as soon as you switch of or close the lid.
Might fix your issue.
Thanks AlanJC.... I'll give it a go
It is not working for me.
Hey Guys,
I am sure I could do this with Windows 6.. or was it Windows 5??
Anyways, I want a password pin on my phone, but only when I turn it on.
At the moment, I have "Prompt if device unused for" set to 0 minutes. This means when I turn it off, it asks for a password when I turn it on again. The annoyance of this is that it also locks when I am reading emails etc.
I want to be able to have the device NOT lock unless I switch it off!
I seem to remember there was a setting, that you could enable power on password only.
Any help appreciated. It's driving me insane!
SadisticRabbit said:
Hey Guys,
I am sure I could do this with Windows 6.. or was it Windows 5??
Anyways, I want a password pin on my phone, but only when I turn it on.
At the moment, I have "Prompt if device unused for" set to 0 minutes. This means when I turn it off, it asks for a password when I turn it on again. The annoyance of this is that it also locks when I am reading emails etc.
I want to be able to have the device NOT lock unless I switch it off!
I seem to remember there was a setting, that you could enable power on password only.
Any help appreciated. It's driving me insane!
Click to expand...
Click to collapse
You need to go to settings > personal > phone > PIN/PIN2 and set PIN for phone. Now if you reset your device it should prompt you for a PIN
Hey There,
Many thanks for the reply. Sorry, I should have been clearer. This is not actually when powered off and on, I mean when I put it in standby by quickly pressing the power button, not resetting or restarting the device.
Basically what I want it to do is this...
When using the phone, it doesn't lock (password lock, not button lock).
When I press the power button to put it into standby, then when re-activated, it asks for the password.
My last Touch HD was stolen, and didn't have a password on it. I don't want that to happen again, so want it to ask for the password every time it is tuned on (bought out of standby), but I also don't want the hassle of having to enter the password every time the "prompt is device used for" activates. I read ebooks on my touch and it's a pain having it keep asking for the password. If I set the delay too long however so it doesn't interrupt me, there is a possibility that if it's stolen, it will be unlocked when it is.
Hi
I have an HTC Desire HD
I have changed a setting somewhere (i remember doing it) which switches off wifi when the screen times out. I did it on purpose at the time thinking it would come on again when the screen was unlocked. Wrong!
The problem is I now can't find or remember the exact setting I changed!
Could be powersaving, wifi, screen lock or any other non-obvious setting!
I have tried everything I can think off. At the moment, everytime the screen goes off, so does wifi. Very annoying
I would really appreciate any help
Mark
I wasn't aware there was an option for this is froyo! Unless you're referring to the WiFi sleep policy? Try menu > advanced when in WiFi settings but I think this only allows you to determine the time out period, not the condition (ie the screen going off)... however, there are apps that will allow you to do this. Are you sure you haven't installed something that's causing this?
Go to wifi and press menu. Its under advanced settings.
Hi
Thanks for your tips. Found it!!
It wasn't in the Wifi, or screenlock settings (I had looked at everything on those!!)
I remembered that had installed the Battery Booster app and then messed with the Battery Teak settings to turn off wifi on screenlock
Actually a handy app, if you set it up properly, which I hadn't!!
Thanks once again for the prompt
Mark
don't forget after change setting hit menu button again to save the change lol
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Milimbar said:
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Click to expand...
Click to collapse
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
In that case I do not know.
You could try a factory reset, but I do not know if that will help.
If mine did that I would be returning it for a replacement.
Also make sure settings/lock screen/secure lock/smart lock isn't set to anything that's trusted.
Smart lock leaves the phone in swipe unlock if it recognizes your phone is at your home..or hook up to your Bluetooth, etc.
tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
So after digging around some more, I found out what was happening. I have a Moto 360 paired to my phone. I had it as a trusted device and that's what was allowing me to do swipe while still having the lock screen set to something else. However, my fingerprint reader is still acting up. It's still not even trying to read my fingerprints.
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Go to settings and search smart lock... It shows that if you ate home the screen stays unlock but if u leave anywhere it'll lock..you can turn the location off when. You get into smart lock
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
[email protected] said:
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
Click to expand...
Click to collapse
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
[email protected] said:
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
Click to expand...
Click to collapse
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
[email protected] said:
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
Click to expand...
Click to collapse
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
[email protected] said:
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
Click to expand...
Click to collapse
I figured out the issue, at least for me. First I tried to disable both Lookout and ATT Protect Plus as device administrators but still the lock setting would revert to 34 minutes and 7 seconds. In my account settings for my corporate email, there was a link for all security policies. Sure enough, the screen lock policy showed as 2047 seconds which translates to 34 minutes and 7 seconds. I cannot change the option as that is the corporate policy set by the server.
This is an issue with Samsung s7 including the edge. Mine was playing up from the day I got it. I took it into carphone warehouse assuming it was a setting and the guy serving me basically said to send it back. I eventually got a refund from Samsung (it was painful) and then I stupidly bought another one of these overpriced, over hyped pieces of **** from John Lewis instead. I've always used windows (mobile (i.e. what I'd call old android and what XDA was made for) and then windows phone and briefly windows 10 mobile. From my short experience of using the so called best android phone I have to say gimmicks aside, the features both phones share, windows destroys android, emails, documents, ease of use, fluidity, user experience....oh and a working lock screen. Not happy and it's my own fault, I fell for mass marketing and believing the hype.
I think I found the answer
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
If you have a device like a Bluetooth paired with your s7 edge, make sure that smart lock isn't on. Once I changed that that setting, it stays locked.
Can you describe how to find this page (that showed 2047 seconds)? I want to see if my company IT will change this.
Hi I have s7 edge, here's the problem is I cannot touch the screen, already do hard reset and rebooting still the screen cannot touch. I could not unlock my s7 edge.
Thanks for the help
Originally Posted by Milimbar It actually is staying what you set it at. Samsung as usual has set up some stupid defaults for this phone. Go here and set it to Instantly and it will work as you expect. Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out With those settings every time you unlock your phone you will need whatever security you set. With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung... As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process. I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process. If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
From:shawnthall15
Thank you for the tip it really helped me fix the lock on my new samsung galaxy amp prime!!!!
Restart your phone
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
I made sure i made my password effective immediately (it was set to 5 seconds) after you lock your phone and it didn't work.
Then I realized that I didn't restart my phone yet.
Lock screen was effective immediately after I restarted my phone. Solved my case!
Fixed
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time to look at your phone. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
---------- Post added at 06:01 AM ---------- Previous post was at 05:55 AM ----------
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
Go to settings/lock screen and security/other security settings/trust agents and turn off Google Smart lock option.
You are back to instant phone lock.
Cheers🖒
Hi guys,
I was trying disable the fingerprint at night when i arrive at home enabling only screen lock with pin, i can't found any way to do that so i started to reboot the phone before sleep (when a phone is restarted, the first unlock screen must be by the pin code). Now I'm trying do this automatically, i want know if has some way to do this without root since the tasker need a root.
thx
You can always unlock the phone with your PIN or by fingerprint. But after a reboot it needs your PIN for security reasons.
You can set this condition without a reboot by enabling "show lockdown option" in "Settings > Security & location > Lock screen preferences". Then press and hold the power button and klick on "Lockdown". Now your PIN is required to unlock the phone for the first time - without reboot.
WoKoschekk said:
You can always unlock the phone with your PIN or by fingerprint. But after a reboot it needs your PIN for security reasons.
Click to expand...
Click to collapse
What I want is exactly that, disable fingerprint (for my girlfriend spy reasons) but i want automatize a phone reboot before I sleep.
:cyclops:
skyter_666 said:
What I want is exactly that, disable fingerprint (for my girlfriend spy reasons) but i want automatize a phone reboot before I sleep.
:cyclops:
Click to expand...
Click to collapse
What kind of automatization are you thinking of? At a specific time? You can try the app "Tasker"...