Related
Dear all, is that possible to activesync mini and pc without USB? Whenever using usb to sync, mini will be charged. Can i prevent this auto charging problem coz lets say the battery in my mini is always full, will it do any harm when it keep charging whenever we activesync? If we can activesync using BT, what is the procedure?
Just go to bluetooth settings and do activesync setup. you will need to re pair your PC. works really well.
rmg, what do u mean by repair the pc, can u provide me with more details and step on doing this, appreciate your help thanks
rmg, i did what u told me, but when i click start button on the "bluetooth activesync setup:" the message box come out "please start bounding with other bluetooth device which support serial port or activesync profile as your activesync partner". i cannot get it done, can u help
how i do is it
1) bond PC and Phone in Bluetooth Settings in windows
2) on phone go to Activesync - tools - Options - Options - Dropdown box
Eather Bluetooth or 19200 default
3)Open active sync pc
4) Active Sync on Phone - Tools - Connect Via Bluetooth
and that is how i connect
In the advanced settings for your BT dongle you will need to check what Bluetooth Serial port number is being used. I found mine under local services. Once you have that go into the proerties for AS and where it lists the serial port to use put the COM Port number of your BT Serial port in that box. Now when you hit the AS button they should be able to connect with each other. Hope that helps.
One of the requirements is for you to have a ActiveSync 3.8.
Once you have that installed a new port will also be installed with the Windows BT stack. When the BT stack is detected a new port will also be available.
Now the next step is to go to the PPC. Hit Start go to Settings, System and then Blue Tooth Settings. Hit the Start button and it should bring you to the BT activation where you turn it on. Have everything checked. Once this is done, start pairing the laptop by having it detect the PPC and set a passkey for protection. Once they are paired, launch ActiveSync in the PC and go to File and Connection Settings. Once in this screen pit a check mark on the Allow Serial... Set it to the new port set by your BT Stack.
Once this is done, on the PPC, hit Start and go to Programs select ActiveSync. Hit Tools and then Connect via Bluetooth. This should then start working.
One bug I did find is that once you connect your device to your charger and initialize the ActiveSync over BT everything will work well. BUt once you remove it from the power conenction, your device will soft reset.
ok i will try, thanks to all of you
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
@MC_Oliver
The answer is yes. If you are doing ActiveSync over Bluetooth it is the same as ActiveSync with a cable. You should have the same icon on the top of your screen. You can even browsse the files in your PPC.
Thanks dre.
Btw, curious if you have the same problem as I do in this thread? Thanks again.
mc_oliver said:
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
Click to expand...
Click to collapse
Is my question stupid? sorry about that coz i am new
mouse said:
Is my question stupid? sorry about that coz i am new
Click to expand...
Click to collapse
No, not at all. I cut my sentence short and it should have read; I have a stupid question. Sorry for the misunderstanding.
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
zsizsi said:
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
Click to expand...
Click to collapse
I agree 100% that this should be easier. But I think ActiveSync is actually a service that the laptop offers, not the phone. So on the phone, go to your BT manager, select your laptop, and then select services. ActiveSync should be one of the choices. After that, you should be able to connect to ActiveSync via BT, but I think you need to initiate the connection from your phone.
Activesync via Bluetooth
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
thank you all for your input.
i tried everything you guys suggested and it's still not working. my comp only offers a serial connection. is that ok? it has this toshiba bluetooth software on it not the original windows kind.
when i choose connect via bluetooth on my ppc's activesync it sais there's no computer that supports bt.
any ideas?
thanks again
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Hi,
Thanks for all your effort.
I did what you said and it's still not working.
When I'm trying to connect from my phone via bluetooth it satill sais it cannot find existing blueooth partnership with a pc that supports activesync.
what am i doing wrong?
Thanks
IceGoal said:
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Click to expand...
Click to collapse
Phat!! This works for me with my Acer laptop and Bluetooth connection, thanks man!
Sweet, took a few tries, but works like a charm.
Thanks
Bump
I just wanted to bump this to say thanks for posting the bit about using the LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)] port instead of the client port. Trying to get AS working using the Toshiba stack was driving me around the bend!
My pleasure
I've learned a lot from this wonderful board from a lot of wonderful people. Glad to be part of it!
You're the MAN
Thanks. This also worked for my Cingualr 8125. Many hours wasted. Glad I found this post. Thanks for your help.
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
The only thing that worked for me after 4 days of messing with it was to do a cold boot.
The first thing I did after the boot was to follow the instructions. Voila! ActiveSync magically appeared.
Hi all,
I have exactly the same problem with my qtek9100 and my IBM T43 Laptop.
I tried many times but....still not working!
As zsizsi if I try to make a relationship via PDA, it asks me the pairing key, and I'm blocked.
If I go through PC, I can do pairing, in the services I flag activesync, I configure the same com port that I have on AS (com 8) and when I0'm in the bluetooth wizard on the PDA, related to the PC I can only see 3 services:
hands free
remote connection
serial port
no activesync service to flag.
If I try then with the PDA Menu>BT connection it aswer that there is no relationship with PC supporting AS!!!!What the hell!
The only thing I see is that in my BT config in the local server the BT wizard creates a serial port named My activesync......
I have tried also your suggestion but.....
tinman44 said:
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
Click to expand...
Click to collapse
thank you soo much for that info...enabling the "PAN networking service" finally allowed me to connect with my toshiba qosmio laptop
If the devices are paired... You have to select a service for the pda BT connection
Only when you manage to select the servive Activesync (a comport has to be valid assingd) then a connectin can be astablished.
In active sync you must assign a com port.
See the manual in activesync BT
Yes, I can guess it.
The rpoblem is that the devices are paired, the activesync service is flagged in the PC (while I do the automatic pairing devices withn a wizard).
But I can't still see the service in my PDA.
I can only find:
Hands free
Serial port
remote connection
No activesync service on the PDA relation wizard...
Any other suggestion?
Another issue.
When I look in my BT services, I can't find an activesync service, but only an icon (com plug) called My activesync.
Look at the properties of this icon I can only flag automatic/manual and Secure/unsecure connection, and there is the window manu to select the com port (that is the same selected in Activesync settings).
Is that correct, or I should find a specific activesync icon (like PIM syncronizing ....)
Blinks....
SKID
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
FOLLOW THIS STEP BY STEP.... I HAVE DONE IT 3 TIMES FOR MYSELF AND FRIENDS ON DIFFERENT LAPTOPS AND IT WORKED FIRST TIME - EVERYTIME!!!
PS. Delete all existing pairings, relationships, COM ports etc, START FRESH!
THANKS MAN!
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
Thanks IceGoal, on my HP laptop it works superb.
But I have to say that those people that work on our mobile network provider company are uncapale, because they said that this is impossible to connect.
Thanks again folks.
Hi All,
I've been trying to get my TyTN to sync with my PC with ActiveSync 4.2 (and 4.5 beta) over bluetooth but I can't get it to work. Everytime I try to sync, I get a message saying the service doesn't exist on the device.
Has anyone managed to get it to work???
Advice please...
Dan.
Hey, I did manage to make it work. First of all you need to configure virtual serial port on your desktop/laptop machine, and make Active Sync use this port for synchronization.
Then pair your TyTN with your PC, when you're done pairing devices you should see "Active Sync" service available on your PC. Make TyTN use this service.
Go to ActiveSync (at PDA) and click Menu->Connect with BT... wiat a few moments, allow your PDA use the serial port (if necessary) and you are done
I use BT ActiveSync all the time (AS 4.2) with no issues.
Make sure you've done the following:
- paired both devices
- in AS Connection Settings, enable connections over the BT COM Port from your PC (check in Device Manager if you don't know which one it is).
- in BT Settings on the TyTN, be sure to select the ActiveSync profile on your paired device
I tried to create the virtual (bluetooth) serial port and, although it shows up in Device Manager, it doesn't show up in the list of ports in AS (4.2 or 4.5 beta). Any ideas why?
Thanks,
Dan.
COM 7
In Activesync on the desktop open connection settings and set it up to allow AS to use COM 7. The go to the TYTN and from the AS menu, select connect with Bluetooth. Message will say there is no existing connection and will get you to set one up. When the two devices have paired you should be able to select Activesync as one of the available services. Once that is done, go back to the AS menu on the TYTN, select connect via Bluetooth and bingo you are away. - or so it worked for me.
you should be able to select ActiveSync as one of the available services.
This is my problem, flash. There is no Activesync service on the device to be able to select. Just serial and wireless stereo.
Kevin
kevinnugent said:
you should be able to select ActiveSync as one of the available services.
This is my problem, flash. There is no Activesync service on the device to be able to select. Just serial and wireless stereo.
Kevin
Click to expand...
Click to collapse
Same issue here :?
Ditto here.
Dan.
CmptrDan said:
I tried to create the virtual (bluetooth) serial port and, although it shows up in Device Manager, it doesn't show up in the list of ports in AS (4.2 or 4.5 beta). Any ideas why?
Thanks,
Dan.
Click to expand...
Click to collapse
It probably won't show up until you go to ActiveSync on the PPC, and choose Menu... Connect via Bluetooth...
It should reopen the Paired Device menu, where you'll find your desktop, and a new option for ActiveSync.
Consider this the final step after the previously described Pairing process.
I understand but, in my case, AS on my PC won't show the new BT serial port in the list of available ports (COM1, COM3, IrDa). Is there something I need to do after I create the BT serial port on my PC so that AS becomes aware of it?
Dan.
In Control Panel... System... Hardware... Device Manager, look under Ports. Do you see the BT COM Port? If not, you probably need to do some work on your desktop's BT setup...
Yes, I do see the BT Serial port in Device Manager but it doesn't show up in Connection Settings in AS.
Any ideas?
Thanks,
Dan.
Is the BT Serial Port service "enabled?" If that doesn't help, sorry, I can't think of anything else!
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
You'll need to set up your ActiveSync (AS) in your PC to point to the port which your Bluet is using. After that, use your phone to 'discover' your PC and you should have AS service for your Bt in PC.
You mean...
In Bluetooth configuration on the pc I have COM9 assigned to bluetooth Serial Port and COM8 for ActiveSync. So you say I have to set as incoming serial port COM8 in P3600??
Configure the AS to use COM9 (in your case).
Thanks
But still no luck, it seems to be connected but activesync says there's no device in that port, I'm afraid it's a compatibility problem between my laptop bluetooth drivers and P3600 ones.
Anyway thanks for your help, I'll keep on trying...
Probably you can init a sync from PC, but the one I tried is to initialize a sync from my PPC. Once you have AS to use serial of your BT, then while discovering services (or pairing) from you PPC, your PPC should show that there is AS service on the PC. Start your AS on your PPC and sync.
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
El_Mariachi said:
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
Click to expand...
Click to collapse
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
i use this settings
http://www.htcwiki.com/page/activesync+via+bluetooth
it's work for me.
MrTW said:
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
Click to expand...
Click to collapse
Same here... Active sync does start and tries to connect when pairing... but it times out and the activesync service is not seen as an option on the ppc.
Julioski said:
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
Click to expand...
Click to collapse
Hi
What kind of software are you using microsoft widcomm or bluesoleil.
Hello everyone,
i am using mobile center in vista and i haven't got any idea, how to connect my S110 via bluetooth with my PC.
I already added and paired magician, but when i select "Connect via bluetooth" option in device, after seconds it tells me:
"Cannot start communications with the desktop computer. The communications port is not available. Another program may be using the port, or it may not be valid.
Quit any programs that may be using the port and reconnect. If the problem persists, restart your device using instructions provided by the manufacturer."
I am using WIDCOMM stack in PC, and there is COM8 in Properties of my magician. I think there is problem with COM ports numbering, because in magician are Bluetooth options where I have Outbound (COM5) and Inboud (COM4) port.
Any idea how to fix and succsfully connect and sync my device via bluetooth?
Thanks a lot for every usefull answers!!!
Okay, so I didn´t stop playing with it and found a solution!!
1. Windows Mobile Device Center connection is set to accept Bluetooth connections.
2. In device in bluetooth options are checked Incoming and Outgoing COM port.
3. Remove and again pair device.
4. On device select Connect via Bluetooth and here it is!
I dont know if it works for someone else, but I hoper helps.
Have a nice day