Hi All
First post here so please take it easy on me...
I have a small problem with my O2 Xda Exec and the Land Rover BT car kit. Basically the quality is really poor, sounds like I am in a tin box.
Before you all say that is exacly what a LR is I have tried my old SonyErricson and my wife's Nokia and the quality is superb, so I guess no probs with the car kit.
Do you guys have any ideas how to help?
I have swapped the phone out with O2 on several occasion for many different faults nothing has affected the quality.
Just installed Ivans Beta14 and I have MSVC1.6 running.
Seem to be OS 5.1.342(build 15605.3.2.0)
Rom Ver 2.50.00 WWE
Radio 1.09.00
Protocol 42.42.P8
No idea how to find the BT version
Any help greatly appreciated
Lee
Related
These stacks I believe are newer than the Widcomm 1.5.0 series
I think Broadcom reset the version 1.0.0
These are Broadcom 1.0.0.3000 and Broadcom 1.0.0.3500
Build 3500 is slightly unstable but newer.
These came from an i-mate patch for a PDA2K.
DO NOT USE on an i-mate PDA2K (get the orginal unhacked ones from Club i-mate).
I removed files specific to that phone and basically left just the BlueTooth stack.
Recommend a HARD RESET before installing.
I've tested theses patches on a Sprint PPC-6601 (Blue Angle CDMA phone).
Do not do a restore of a backup before or after installing this because it may restore incompatible configuration files that may crash. Build 3100 is more robust against this problem.
Hey Bro
These two are for the Qtek 9090/Xda IIs or Xda II?
I am running 2.20CHS translated with Radio 1.18 and have been unable to get this stack to work. Has anyone tried it?
The ones I posted above are hacked by me to work on the CDMA version (Namely Sprint PPC-6601).
The ones referenced in this reply below are the original patches I started with that came from i-mate club. The offical phone name that the patches are for is "i-mate™ PDA2k" (GSM Slide out keyboard). I don't know how well they would work on the Qtek 9090.
Build 3500 http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB
Build 3000 http://www.blueridge.net/dereck/bt/new/OEM_WWE_122_008.sa.CAB
Yes, good link but already bad quality with all bluetooth headset.
It's a shame.
It's a shame you don't give more details.
Which phone, which patch and what happened.
Works great on my phone.
I'm using the 3100 patch from the first post in this thread on a PPC-6601 with a HBH-300. Installed on top of a HARD RESET. That has Build 1.0.0.2200.
It's almost working perfect. Once in a great while if I go out of range for a long time I just toggle bluetooth and it reconnects immediately.
Dial Up Networking and Active Sync all work.
No static. No dropouts. Will go to sleep and wake up and still be connected.
I think that the "shame" was not for you but for imate as their patch don't solve all the issues. Maybe only a bad english ?
Tried on Himalaya_SE 2.06...
I'd merged the files from 2.02 and 2.06 and get a fairly stable handsfree, but I saw your files and got greedy... :twisted:
hmmm, it didn't work though. The installation freeze at splash screen after i cold reset the device.
I believe that there are still device specific entries in the cab files, but it's beyond me at this moment. :?
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
Note that I attached to the first post of this thread Build 3500 release 124 of the i-mate patch stripped down for use on PPC-6601 and VZ6600.
BT problems
Just installed the 3500 fix.
It improves slightly on the Jabra 250, but not enough to actually use it.
It Stabilized the connection between my Holux GR230 GPS and the Qtek 9090.
Hope there will be a better fix.
Try to look at the connection, problem with the Jabra is that it fluktuate from just right to zero every other second.
Nice to pay 800 Euro for something that do not work :shock:
I've added new patches to this the start of this thread.
They work primarily on PPC-6601. Read the attached notes.
Hi mswlogo,
Can you help me if you know which version works on a win2003se translated from chinees on himalaya?
Thanks
That phone is quite different.
I think some other folks are working trying to get this stack working on other phones like yours.
Most of the patches above have registry scripts run in them that will very likely not work on your phone.
The other patches assume you are already running late version BroadComm Stack.
I have HP hx4700 and the Widcomm version is 1.5.0 Build 2000
which one is newest?
That's a really good question.
I'm amazed to see BroadComm on 1.5 instead of WidComm.
What are the dates on the bluetooth files \windows\bt*.*
They are generally around 12/9/2004
It's hard to say what BroadComm and the venders are doing here.
Bluetooth stack on h6315
I just found a new bluetooth stack from:
http://www.ppcw.net/?itemid=2210#cmt9543
Installed on my t-mobile h6315. Device was previously inoperable with bluetooth headset. Device would go into power standby mode, and if bluetooth was running when it went to sleep, it would freeze requiring a soft reset. Now device wakes on power button, with bluetooth running, as it's supposed to. Device also wakes on incoming call, reconnects headset in less than 1 second, and allows me to answer call on the headset buttons. All other headset functions are working as designed, and sound quality seems good. My headset is plantronics 2500. Also, this stack adds a profile in the list for A2DP (??) high quality stereo headphones. Don't have any of these headphones, so don't know if this works on the h6315. Also, don't know if this is the same Broadcom/Widcomm stack you guys have been working with.
Installation is straightforward - put it on the device and tap it. Reset, delete existing device pairings, re-establish the device pairings, and you're ready to test.
All that patch is supposed to do is add two new bt profiles to the pda2k.
* High-Quality Audio support (A2DP)
* Keyboard support (HID)
I'm slightly suprised you got a performance gain out of it.
h6315
It's definately fixed the problems with my device hanging when it goes into standby with bluetooth running and the headset connected.
Now my question is should I install the build 3500 for the 6315 listed above? It appears to be a newer release than this. Any thoughts as to the differences? I'm having a hard time following from the thread as to all the other changes that are in this .cab, and why they are there? Can any one help summarize that?
Hi I cant get my Pioneer bluetooth radio to connect to my XDA EXEC I have used my Pioneer radio to connect to other phones fine.
Anyone else got this working?
also can u rename the Bluetooth on the EXEC
I don't have an answer, but can you comment on how the pioneer radio works as a hands-free kit?
Not technically how it works, but how you have found it ie: echo's, caller experience etc.
Works fine the mic that comes with the radio works great, I installed it in the top right hand corner of the drivers side, and even if passanger wants to talk the person hears other end,
Some people have said that there is a bit of a Echo on there end.
Normally it conncect to bluetooth phones easy, juts click on register it finds phone then enter code on phone and done.
I have managed to see the radio from connecting from XDA to the radio, but the radio will still not register it !!. can anyone help.
Don't use the radio's 'register' function. Go to connect and set it going then go to the pda and add a new BT device with the code 1111. Worked for me on my JAMin.
Regards
Can anyone confirm if the Exec is compatiable with this stereo? I've got an Orange M5000 and was thinking of getting this stereo, specifcally for the bluetooth functionality.
I don't think the phone is on their compatibilty list, but I know these lists aren't always kept up to date.
Thank you in advance!
ianlarner said:
Can anyone confirm if the Exec is compatiable with this stereo? I've got an Orange M5000 and was thinking of getting this stereo, specifcally for the bluetooth functionality.
I don't think the phone is on their compatibilty list, but I know these lists aren't always kept up to date.
Thank you in advance!
Click to expand...
Click to collapse
Maybe you should tell us your ROM version so we can see if it has A2DP support.
ROM Version 1.30.90 WWE
Radio Version 1.03.00
Ext Rom 1.30.174 WWE
Thanks
After trying at least 10 different conbinations of rom/bt stack/patch, finally get bt GPS and A2DP headset to co-exist on my XDA II. I want to thank the brains of this forum...
BTW, Here is the first impression:
1.A2DP functioning well.
2.AVRCP also works!
3.Sound quality is great, no dropping/cut-off.
4.Machine is a bit slower when streaming music.
5.Occational re-bonding of the BT GPS receiver needed, but painless, takes less than a minute.
Still enjoying/testing...
I'm using i-Mate PPCPE (XDA II), Moto HT-820 headset, Belkin(Fortuna?) BT GPS receiver. WM5 ROM 2.01a.32WWE (dl from buzzdev), Radio 1.18.00...
Thanks again guys!
WOW, please tel us how?
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Re: WOW, please tel us how?
MrGucciman said:
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Click to expand...
Click to collapse
If you only need stereo headset, ROM1.72WWE will be okay, just install widcomm BT stack (http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=73), you don't need wm5.
If you have BT GPS as well, you need to upgrade to wm5, everything works; or you can use xda2jojo's WM2003seUpgrade (http://forum.xda-developers.com/vie...days=0&postorder=asc&highlight=2003se&start=0), but you have to switch between MS BT stack and wicomm BT stack to use stereo headset and GPS.
good luck.
Hi,
I'm running the O2 Exec with an Anycom SBH100, excellent pairing with one HUGE issue.
If the headeset is not paired I'm unable to hear anything in normal phone useage!
Damn that's frustrating, I spent ages getting this to work with my headset and now it wont work without it. :?:
Jasjar ROM 1.30.76WWE
Rom Date 20/02/06 (UK Date)
Radio 1.09.00
Protocol 42.42.P8
ExtRom 1.30.164 WWE
I'm not entirely sure who's A2DP patch I've installed now, to many trial and c*ck up's..
But I do have Zoki A2DP to uninstall.
I hope someone can put me out of my misery here.
When paired with my PC I can simply alter the audio back to the sound card, and it's the same thing I need to do with the PDA, I think.
Alec.
Hi All
Found a lot of wonderful stuff here, but still stuck.
Can an O2 XDA Mini S be 'flashed' to support A2DP? I want to
use mine with a set of Motorola S9 Bluetooth stereo headphones
and MP3 player software
I have tried a number of ROMs (TNT 4.0, etc) but it still I only get a
'hands free' check box not a 'bluetooth stereo' or the like box
I have ROM version 2.21.4.1.WWE
Protocal Version 413.1.03
ExtROM Ver 2.21.4.101
Any help for a poor newbie would be great
Thanks in advance.
I use Vanilla by NotTooSmart, and A2DP works fine with this ROM.
If You cant find it on the net, please let me know via PM, and I will upload it somewhere for You.
Hi
Thanks for the reply - I have got a bit further.
It appears my unit may be CID locked, so I have been using batch
tool and pdocwrite and that seems to work.
I have tried Titan V2.0, TNT4.0 and SeeNoEvil all of which give me WM6/
A2DP, however all of them stop my 'Contacts' from working. When I tap
'Contacts', it flashes up and closes again - any ideas? Do I need pocket
outlook installed?
JayDee
Are you saying that if your Wizzard is CID Locket you will not get the A2DP module to work?
I have a G4 and use ShellTolls to flash it.
I am just about to purchase an BT Headset.
Please reply and let me know if there will be any problems.
Cheers,
Slawek