Related
I have an O2 xda Neo (PM300) running Windows Mobile 5 Pocket PC.
All of a sudden I noticed I no longer receive notifications or reminders of appointments or tasks on my "today" page nor any audible sounds. Even though I have:
1. Enabled sounds for reminders in "sounds & Notifications"
2.checked the "display message on screen" and "play sound" boxes in the "notifications" submenu
3.Checked the "set reminders for new items" box in the "appointments" sub menu in "options" in "calendar" (and done the same for "tasks"
My clock is correct. I have soft reset the unit a few times, I have set sample appt's and tasks and attempted to set a reminder for 5 minutes prior just to test and still nothing...
It was working fine upto maybe a couple weeks ago and just stopped working one day. I am at a loss, as the sheduling/task/appoitntment aspect is the main reason for me going the pocket pc route.
Now, I have no advance warning of tasks or appt's other than the calendar displaying the next few or so the day of or day before.
Very frustrating!
Look for Check Notifications ScaryBear Software. This program might be you solution
I had the same problem this week.
In my case it was either the (failed) installation of pocket clock or pocket max phone alarm that did it.
I loaded a previous week's sprite back-up (program part only) and that fixed the problem. I have not tried to reinstall pocket max phone alarm.
Will not reinstall pocket clock because that did not work anyways.
Robin
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
davetribe said:
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
Click to expand...
Click to collapse
I have exactly the same problem - but unfortunately cannot remember when it showed up the first time. I do not want to try a hard reset, also checking pocketmax seems that they only advise to do a lot of reinstallations. And I worry the problem will show up again later as I want to continue using phone alarm. I rather would like to change registry entries.
- Anybody has some idea what to change?
- I found an empty string value WAVEFILE in HKKLM\SOFTWARE\Microsoft\calendar\reminder - can anybody tell me their value here
- same empty value is in HKKLM\SOFTWARE\Microsoft\Tasks\reminder
Thanks Hase01
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Way2go said:
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Click to expand...
Click to collapse
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
hase01 said:
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
Click to expand...
Click to collapse
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
Just download my Free Task Manager found here:
http://forum.xda-developers.com/showthread.php?t=280104
1) Launch it on your pocket pc
2) Select Notifications tab
3) First try to remove duplicates
4) Try to remove SCRIPT:0x000...
If it still doesn't work, select all of them and disable them.
Do a soft reset and create a new notification, if it works, I suggest you to enable only the necessary notifications, so those like:
CALENDAR.EXE
\Windows\calupd.exe
replog.exe
calnot.exe
clocknot.exe
and delete all [none] notifications
Cheers,
.Fred
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
hase01 said:
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
Click to expand...
Click to collapse
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
dotfred said:
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
Click to expand...
Click to collapse
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
hase01 said:
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
Click to expand...
Click to collapse
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
hase01 said:
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
Click to expand...
Click to collapse
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
dotfred said:
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
Click to expand...
Click to collapse
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
hase01 said:
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
Click to expand...
Click to collapse
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
dotfred said:
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
Click to expand...
Click to collapse
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
hase01 said:
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
Click to expand...
Click to collapse
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
dotfred said:
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
Click to expand...
Click to collapse
I got the notifications back. I think it was basically repaired by installing alarmtoday again from backup. I think the problem could have been caused by the new sktools version. Strange.
B.t.w. do you need a beta tester for oyur TM on IPAQ. Then just sent me a pm
Hase
Ok. I have the same problem recently.. unsure what is the problem, but it seems that softreset *cause* (not solve) the problem, some what.. during my testing.
Anyway, I tried a few solutions listed, and the easy one is to use the TaskManager (freeware) to find the notification with 'Status' is in 'signalled'. These are passed notifications and it seems that these are causing the problem. As soon as I've removed them, the problem seems to have solved.
Then, I tested it again, by removing the 'Init_tray' from the startup and do a softreset. I tried it again, and it doesn't work. I check again on Task Manager, those 'signalled' stuff are back.
I set up an alarm clock on my P3600. When it woke me up I didn't get the soft key to shut it off. From that point off - it hounts me. Soft reset the device so many times in the last few hours it's driving me crazy. I will get the wakeup tone right after I soft reset EVERY TIME. and then every few hours during the day. I had MS Voice command which I removed. I tried to set a new alarm but that one just added yet another unstopable reminder. I think I also don't get notification for meetings so maybe something is wrong in the registry???
HELP... I don't want to HR the device.
WM5 by the way.
Thanks,
Nir
By the way - tried to remove the notifications from the queue using pocket mechanics but after soft reset - they all came back....
Had the same problem, what solved it was a hard reset.
ari79 said:
Had the same problem, what solved it was a hard reset.
Click to expand...
Click to collapse
had the same problem also...
only hard reset helped...
what s/ware are you using for your alarms?
I was using the built-in clock.
Just hope that official WM6 is out soon so I have two good reasons to HR..
i have the very same problem!!! any ideas how to resolve it without HR?
fantomex said:
i have the very same problem!!! any ideas how to resolve it without HR?
Click to expand...
Click to collapse
I didn't find any
sometimes ago i install some 3rd party alarm and remove it, bcoz it did not suit me. and install another one.
but first one left some message in notification queue, which always complain "Cannot find program bla-bla-bla...".
solution: install any software (like SKTools) and look inside notification queue (this queue respond for any notifications/alarms/etc..) and cleanup unwanted notifications.
hope, this helps.
added: sorry - did not read that you already try to do this. but anyway this is a problem - notification queue somehow hold this record which annoy you. you just have to find the way to clean it...
Same problem here, what I do was recover from a backup taken a day before the problem start. That solve it.
The problem start suddenly...
I try soft reset, turn the device off (remove the battery) and then turn it on again, also do the MemMaid 2.0 stuff with no positive results...
Sprite backup was my solution.
WM5 (factory rom, GPS enabled)
Default built-in clock, no alarm managers or any third party software.
Broken Alarm Clock
I have same problem on my Orange M700 (standard) and still do, even after a hard reset!? Excuse my possible lack of knowledge, but could this be just an issue with the registry? Or the original WM setup files?
Same problem on S300+. I don't want to make a hard reset.
Does anybody found a registry solution or something less violent ?
hmm.. maybe using alarm software ? that's helped me before.. instead performing HR of course..
I have played around with different versions of a backup program, which after expiring shows a permanent line in my today screen saying "trial period expired". I tried everything: deinstalling the programm, searching the registry, etc. Nothing helped. (ok, I am not really a developer, but not a complete lefty either... )
Please, can anybody help me, how I can get rid of this ugly notification ?
Thanks a million....
Really nobody any idea ?????
Alright, got it finally fixed
I downloaded the programm MemMaid (free trialware) and run a cleanup of my PPC. That helped and removed the bothering notification. ..and the system is faster now, too...
Hi everyone,
Since a couple of weeks, my trinity suddenly stopped reminding me of appointments. Before, it was working perfectly, using either sound, vibration, popup, or a combination of three. Now, it remains desperately silent and inert - it doesn't even raise a popup when an appointment happens.
I'm seriously considering going for the hard-reset solution, but before I try that I'd like to know if there might be any other solution to restore that essential functionality.
So thanks a million in advance !
Try to rebuild the notification queue e.g. using MemMaid or similar application.
Read also this thread and read my posts which maybe will help you.
HELP!
I only receive SMS only when the screen is lighted. If my HD is on standby the whole day, I wouldnt receive a single SMS. THis is irritating. Whenever I ON my screen, I would receive a couple of msgs at one go, all timed hours ago. Its really irritating!!!
Anyone experience the same issue???
are u using phoneLog for logging calls and sms to calendar? I experienced this - and sometimes even did not receive any sms - when I used that app ...
usrname said:
are u using phoneLog for logging calls and sms to calendar? I experienced this - and sometimes even did not receive any sms - when I used that app ...
Click to expand...
Click to collapse
Nope, non of the above... have been using HD for a month plus.. still not receiving sms when on STANDBY with screen OFF... sigh.. I on my screen every couple of mins to ensure im not missing a reply to someone's sms... ugghhh!
Is this when your in vibrate mode or normal? For vibrate to work I found you have to enable it in the sound settings. This is not normally needed but for some reason you have to on our devices :S
My Touch HD is back in its box precisely because SMS (text) messages did not alert me to their arrival when the HD was in standby.
I tried all the suggestions made by other posters, including hard reset, but none worked reliably. Reading some of the posts reveals that this bug has existed since the Diamond came out but HTC is in no hurry to fix it.
I can't tell whether any of the 'ROMs' that others produce will cure this problem and am left with an expensive paperweight.
For the time being, I am back using my Treo 680, which has no problems with SMS. Sadly, I shall have to abandon it eventually because Palm does not intend to produce 64bit drivers to enable synchronization. Ah, well, nothing's perfect!
Leglehid said:
My Touch HD is back in its box precisely because SMS (text) messages did not alert me to their arrival when the HD was in standby.
I tried all the suggestions made by other posters, including hard reset, but none worked reliably. Reading some of the posts reveals that this bug has existed since the Diamond came out but HTC is in no hurry to fix it.
I can't tell whether any of the 'ROMs' that others produce will cure this problem and am left with an expensive paperweight.
For the time being, I am back using my Treo 680, which has no problems with SMS. Sadly, I shall have to abandon it eventually because Palm does not intend to produce 64bit drivers to enable synchronization. Ah, well, nothing's perfect!
Click to expand...
Click to collapse
OMG! thats sad! but seriously Im feeling the same.. sometimes when i go out, i switch to a cheap basic spare fone (LG KP110). its sms is way more reliable.. I bought the HD at SG$1250 and yet I cant receive SMSs.. sighz.. tot of selling it away.. but not.. but yes.. maybe not.. sighz...
same here
I have the same issue. Randomly SMS sound does not play until i turn on the screen. I m using stock 1.56 UK Rom. I have a friend at the office with same phone and he is facing the same problem.
All settings are correct. It's obvious because lot of times i get the sound notification while in standby mode....
Don't know what to do.....cheapest phones do this right...
That is so true! i totally agree.. Sometimes it goes back to basic.. the HD gets too complicated that it doesnt even know how to notify its owner of an incoming sms.. this sucks big time.. till this very day I haf to on and off my screen every 10mins to ensure i dun miss a single sms..
If you use HD Tweak, there is an option to set the HD to wake up and notify you when it receives an SMS...
is there a way i can receive an sms with a sound notification instead of the whole phone waking up with screen lit?
is there a way to shorten the vibration when an SMS comes in? the HD vibrates quite long and strong for a single SMS. Just curious. Might help abit in saving battery's life.
Hi, I had this problem after I installed the WWE 1.14 for Middle East, especially after installing the official Arabic Lang. update from HTC !!! When I wake up the Phone from the stanby mode I Receive all the incoming messages at once and the Phone plays the SMS alert !
After Hard resetting the phone and installing a new ROM (1.19 WWE for Hong Kong) the problem didnt go till I went to Settings---> Sounds and Notifications-----> new SMS----> Disable Alert, Vibrator, Falshing Light !!! Basically disable everything and press OK to return to the touch FLO home.
After that, Go again and enable the SMS notification with or without Vibration as you like and it will work !!!
Now, I discovered that any programm that is not made buy a software house, I mean programms made by home developers prematurely screw your system especially programms that interfere with the Windows Shell and System processes and Alerts !!!
My advice is Install a fresh new WWE rom (1.19), if the alert didnt work, Go disable the Alert, press ok, return to home screen, then go back and enable it and it will work !! it seems that there are some things that does not change in the phone settings even if you hard reset or install a new ROM !!!!
For 1.19 WWE and some other Roms, Dont close SMS application directly after sending a message, just press the Home button to return back ! the SMS application interface will stay in the bakground and wont take more than 1% from your free memory ! I noticed even on my current 1.19 rom is if I send an SMS and diredcly Click the X to close the application after sending the message it will cause the phone not to receive next sms untill I open the SMS application !!! Any how, you can close it after a minute if it bothers you to keep it in the background.
I hope this helps !!! I used Duttys 1.17 and faced the 'Coruppted Ringtone problem', that the phone wont ring and switch to a default ring that is not loud and made me miss calls, only soft reset solved it but it came back every 2 weeks !!! no body could solve it even Dutty dont know what is the problem !!!
At the end it is a phone !!! should call, Ring, Send and Receive calls perfectly !! Any Small Samsung or Nokia or SonyEricsson phone worth 100 $ could do the job perfectly while we pay 800 $ for this HD and it cant ring o receive SMS !!!
Therfore, my advice is to use Stock Rom and dont install any programm that is made at home !!! or any other programm that interere with the system process and alerts or Language !!! Do not play with memory management or registry settings !!!
To customize my phone I installed SPB shell and its wonderfull and better than Touch flo except for the Music Player as you will have to use Window Media !!!
Goo Luck
Another tip,
Go to the registry using registry editor and change si follows:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Locate DisableSMSWakeUpEvent entry, and change its value to 0 (the value is 1 by default).
Hope this helps
I suggest that you change your rom
gigaboss said:
I suggest that you change your rom
Click to expand...
Click to collapse
I support this view. Don't be disheartened as probs like this rarely have anything to do with hardware and are generally software bugs which are cured by just updating to official / custom ROM. (this is the best and yet worst part of thing called Micro$oft )
Please read pros and cons of flashing roms well before trying anyhing !