Related
Hi i have problem some times caller id show just number when someone call me sometimes(same number) show name from contacts how to fixit
Same thing here...
Sometimes it works, sometimes it does not... Actually it has only worked a couple of times...
At first I thought I was closing the ID Contact Monitor when I used an application close button (Battery Back from Omega One). But then I noticed that it still does not work even without the app closer.
Any clues?
I believe that this is probably down to the 32 process limitation of WM2003 on the XDAII 28 processes open automatically as you open programs the XDAII will close what it thinks isn't needed any more.
Can anyone confirm? :?
Hmmm... It could very well be that... :roll:
If you don't use the "permanent save" feature, then you can delete the 4 flashman files out of the \windows\startup folder.
this gives 4 more process slots. Making the number of running processes at startup more in line with a normal XDA.
wasting 4 process slots on 4 different programs that do the same thing to 4 different databases is rediculous. Having them running even when the feature is turned off is also rediculous.
..Chuck..
Yes, thanks... I deleted the task I don't use and now IACaller is working fine ever since...
Thanks!
I've upgraded to the new ROM, and only the lesser 19 processes now, meant to alleviate this problem.
In addition, it's a newer fix of Caller ID.
And even more, I removed the FOUR flashman/mem processes from startup too.
And even then, I find after just half a day of running apps and stuff, Caller ID no longer shows a photo, and requires a reboot to work properly.
Not happy at all, not in the slightest. Not in the least bit impressed, because i see little else that can be done to fix this, so no likliehood of a solution.
VERY poor to say the least.
Shadamehr,
Are you using an application closer like Pocket Plus or Wisbar?
If not, I suggest you use one. Remember that whithout an app closer you are consuming valuable resources and the X only minimizes them.
Best regards,
Rayan
I was using SideBarX.
What I find however, is that this is the WORSE thing to use, as it closes ALL apps, so if the Caller ID HAD happened to just recently update itself, it would close that too, so in effect, closing the very thing with any potential to fix things.
Alas, I find the only thing that works, is to do a soft reset twice or three times a day.
Not a great loss given how quick re-boot time is, but a bit of a stupid solution nonetheless.
Additionally, I find another slight issue, in that if I get an SMS, when I click the notification envelope on the top bar to open it (if I had left it, not catching it straight away, so the first pop up of it had already gone) then the 'speech bubble' that appears with the message in, is REALLY slow now after the new ROM update, taking a second or two to draw itself properly. I can see the outline of the bubble for a fair while before the bubble 'draws' on screen properly.
Sadly however, it even does this after a soft reset to speed things up, so I am very concerned about this aspect of things.
It worked a lot faster before the update.
The rest of the update has been a good thing for me, but I am a bit angry about the Caller ID problem still being here at least for me, but more worryingly, I am concerned at the apparent speed slow down for some things! Especially as I have read tales of others experiencing this too.
But overall, its nothing earth-shattering I guess.
Shadamehr,
As far as the CallerID problem, at first I was having the same problems but I managed to fix this by removing unwanted items on the startup folder (remember the 32 process limit?) and by using Pocket Plus, since it allows you to exclude CallerID from closing.
I also use ScaryBear Software's Check Notifications to remove duplicate events on my system's databases.
Good luck!
Rayan
Pocket Plus? Cheers mate - I'll go search now.
Here's hoping it works.
Also, the new ROM is only meant to have 19 things running. I have further removed the four flashman files from startup.
Do you know of anything else I can remove?
Cheers mate.
Can't find Pocket Plus mate (at least not as a free app).
Any link for me please?
I don't remember what things where in the Startup folder but this is the stuff I have now:
CheckAutoRun.lnk <--- No idea what this is for
ChgDfLnk.lnk <--- No idea what this is for
ClearTemp.lnk <--- I installed this
IA_Caller_ID.lnk
MMReg.lnk <--- No idea what this is for
Pocket Plus.lnk
Poutlook.lnk
Stk.lnk
VoiceCommand.lnk <--- Microsoft's Voice Command
Cheers and good luck!
Rayan
You can find it here http://www.handango.com/SearchRedirect.jsp?siteId=1&jid=2BD54724B6D87D58BA6CB6BA8BB79B81
Cheers!
Hi all,
I've the problem with with my XDA II and IA Caller ID. It works for one or two hours and then impossible to see a picture. The only thing to do is a soft reset.
I've checked the processes and I'm now with 16 processes (using PHM Task Manager to see the processes) and when the problem occurs, the IA_Caller_ID process is still active.
For information, I use WisBar advance to really close my programs and I kill ActiveSync every time I leave the XDA from the cradle.
Thanks for your help...
hello,
Do you put pictures in your SD Card ?
If yes, try with pictures in your phone memory.
I have the same problem with ringtone in my old Qtek (first generation SPV by Orange)
Sometimes, the sdcard is poweroff to preserve battery life...
test and come back ;-)
THe picture is in "/my documents" none on the SD card
Now it's new, sometimes the XDAII doesn't ring at all. The screen lights on but no ring and no information. :shock:
G'day all
I recently got myself a lovely HTC wizard (branded O2 XDA Mini S, ). It's a device I've been researching for a while so I was very much excited to try out my first WM product when it arrived this morning.
However, for all it's beautiful design, it's really been a bit of a big pain on several ways. Most significantly and immediately noticable is the very sluggish interface. Some things, like notifications, I can dismiss fine, but the majority of actions, such as starting a program, opening one of the left-hand buttons or switching to landscape mode, take several (maybe 10) seconds to happen and even then the screen will only be partially and very slowly redrawn. This seems to only occur at the 'today' screen (other programs are pleasantly snappy). Anyway, it's rendering the today screen pretty useless and since it's the starting screen it means everything is taking much longer to do. Is this just my device or is this a recurring issue?
Cheers
Have you reinstalled without the o2 Active stuff (basic mode option I think). It the real hog.
Other than tat have a look around the messages is the forum for various registry hacks to speed this baby up.
It does work well, you just have to tweak the heck out of it.
So it's a matter of going around deleting stuff that 02 put on?
Basic install plus something like SPB or Magic button to close apps properly (apart from the ones you regularly use, such as phone/messaging/IE) makes the device at least twice as quick.
wilesd said:
Basic install plus something like SPB or Magic button to close apps properly (apart from the ones you regularly use, such as phone/messaging/IE) makes the device at least twice as quick.
Click to expand...
Click to collapse
This is exactly what I've done on my mini S...O2 Active is really doggy, the interface looks fine, but mini S can't affort....
Basic intall with SPD Plus work fine for me....I can now play mp3 & mp4 files smoothly with beta player, connect BT GPS receiver with TT5...
To really clear all the clutter, perform a hard reset and when you get to the 'about to customise' step (short countdown) perform a soft reset.
This results in a completely clean OS thats much more responsive. SPB pocket plus is a good app to install next.
There are other registry tweaks such as disabling menu animation that make an additional improvement to the responsiveness
There are plenty of discussions about this in the other threads - have a search around.
Dunno if this works on the Wizard but on the magician, if you map one of your buttons to the "Start" menu, then you can do a lot of program switching without going via today page - and the whole re-draw of it.
Particlulrly if you chose wisely the 5 programs that you can specify for the start menu.
jacro said:
To really clear all the clutter, perform a hard reset and when you get to the 'about to customise' step (short countdown) perform a soft reset.
This results in a completely clean OS thats much more responsive. SPB pocket plus is a good app to install next.
There are other registry tweaks such as disabling menu animation that make an additional improvement to the responsiveness
There are plenty of discussions about this in the other threads - have a search around.
Click to expand...
Click to collapse
The soft reset method is OK if you don't use MMS as the MMS app will not be installed, if you want to use MMS though the Basic install is better
I cleaned my mini-s the hard way
Hard reset, soft reset, then installed some of the extROM cab files manually and setup the GPRS manually too. Wizard now runs ok, its not fantasticly fast, TTN5 still takes time to load, and incoming calls while it loads cause problems (but thats only 15 secs!). Magic button is great, pick the apps you need to keep open (phone, text messages, etc) and "keep alive" and "hide when inactive" then just use close all to keep the RAM free.
Alright - I'll try one of these hard/soft reset cleans. But...
Another problem I've been having is that ActiveSync refuses to detect my device over USB. The USB connection seems fine (Windows XP detects new but unkown hardware - seems to lack an RNDIS driver or something), but a sync I can't make work.
So I can't install anything again. After a hard reset will applications such as phone and messaging be restored or will the require a reinstall (that I can't do)?
Also, remapping the buttons sounds like a brilliant idea. I'm not so big on IE so if I made that my start menu toggle I could reach a whole load of things one-handed. One thing that oft annoys me is when you have to close a program or dialogue box with the cross in the top-right. Can that be remapped to, say, the voice recorder button so I don't have to keep awkwardly touching the screen?
That Magic Button sounds handy also - freeware by any chance? I'll google it in a sec. It's annoying (well, peculiar, coming from a PalmOS background) to have several applications running at once - all that's needed is the phone/messager apps and perhaps the music player.
Thanks for all yer replies!
before i installed wisbar advance 2 (the trial - as i wasnt sure of what it would do to the speed) my wizard rarely crashed and never really needed a soft reset. i thought i was fairly lucky as i have a few programs installed (particularly today plug ins)
but now wisbar has been installed for less than a week, i seem to be getting no end of problems. accessing messaging is very slow (and sometimes takes a minute or so from runing to actually opening, and often crashes.
ive noticed a lot of the time the phone has crashed on the contacts list, and also (as i have photodialler today plugin) when sending specific texts via this. this is providing they are not already open, and so i normally keep contacts and messaging open all day, as it makes it less likely to crash.
i normally have to soft reset 2 or 3 times a day, and its REALLY pissing me off, given the time it takes to boot up.
i think wisbar is great, and i love the extra functionality of the app, but its really messing up my wizard. is this common? are there any programs that are known to clash with wisbar? is it the today items that cause the problems? the apps i have installed are pretty much exactly what i need
and short of getting rid, is there much i can do?
today plugins i have running are:
lvm time
photo speed dial
claunch
today agenda
and thats it!
many thanks
Jamie
Hi. I've used the phone a bit, and I have GSPocketMagic++ but the phone app won't close with the X. Plus, even worse, in the menu I can see that there are 4 instances of the phone running! i.e. Seems like every time I go to the phone interface then it has a new instance in the list. (GSPM seems to be fine and great otherwise.) Thanks.
Now with another app, I'm seeing strange behavior on the part of GSPM (not closing another app and keeping it always on top), unfortunately, I'm guessing it's GSPM but it could also be the phone app.
what do - as a sufferer of this also s use magic button - free . . it solves it about 50-6-% of the times - but this is still my main cause to reboot . . .
I wrote an app, VJPhoneToggle or something, that will close cphone.exe
I've also written a generic task killer.
However, you should know that closing cphone.exe is not advisable. On my Mio A701 it puts the phone in flight mode and prevents calls coming in.
On the HTCs, trying to commence a call from the contacts screen will cause an error.
But otherwise, it's a good way to save a bit of memory. I wuoldn't really advise it though.
re the various instances of cphone running. Probably unlikely - more likely is that the various dialogs in cphone, eg callhistory etc, show up as seperate entries.
VJOkButt can help close some of the dialogs sometimes. But VJPhoneToggle is probably what you need.
V
As Vijay was hinting - you can get rid of the app by putting the device into flight mode. But the purpose of that eludes me. It's a (Pocket PC) phone after all...
AFAIK
MB doesn't really close the phone either.
Need to try the phonetoggle - lol i am still a vijay-virgin!!!
Hi, today my HD2 started to behave oddly - when receiving a call the screen wakes up as normal but no sound nor vibration (as preset) comes with it. The same goes for any other alert - SMS, e-mail...When I try to change the tones of any alert the common preview while selecting doesn't cannot be heard. Even worse, when I tried to play any music from my library with Windows Media Player it started to skip quickly from song to song without playing a note, stopped at the end of the playlist. When I tried TCPMP it work without any problem - music and video.
Any suggestion before I will be forced to proceed to the next logical step - Hard Reset? BTW I am on stock ROM 1.66.479.2 (76641)WWE, I didn't install anything new recently nor have beeb experimenting with any SW.
Thank you in advance.
ive had issues with sounds when setting the system temp locations to a location that doest exist (experimenting with a ramdisk, but i suspect the pricipal would be teh same). maybe some kind of system temp location corruption?
hunt down all you can find on clearing temp locations. start uninstalling apps one by one,
(personally id backup and go for a straight hard reset for the hour it takes to be fully fundtional again vs the hours spent fault finding.)
I think I have your fix ...
I just came across this thread and thought I'd answer immmediately because I, too, have sufferred from this issue in the past. It took me a while to figure out why, but I did. Give me about 5 minutes to collect my information, and then I'll respond again...
Peter
Here it is ...
I have a document that I've prepared in Microsoft Word to store all the handy registry tweaks and solutions to previous problems. Here's the entry for what I believe is your problem:
Sounds or Ringing or Vibration Don’t Work
There MUST be a directory called Volatile here:
Mobile Device\Application Data\Volatile
YOU MUST SOFT RESET AFTER CREATING THIS DIRECTORY
The "Volatile" directory can be empty as long as it's there within the main device Application directory.
Peter
Thank you very much, will share the result
I face to same problem using HD2, thank you. your point is help me to fixed.
Whoa, you just saved me from a hard reset thanks alot Peter.
PETER HTC you are great! Thanx man!
Thanks I fixed it too