My O2 XDA Ecec only lights up the keyboard in very low lighting & then switches off after 10 seconds.
Are the ambient light levels & time adjustable?
Cannot even find reference to it in the manual - any help appreciated
Peter
start / settings / personal / buttons / backlight
uncheck the box marked "Enable keyboard backlight auto sensor"
The time remains the same but the backlight becomes active as soon as you push a button.
Thanks
The answer in ONLY 3 minutes!
Thanks
Peter
No problem the autosensor on the backlight is one of the first things I disable, the auto sensor seems to only light the keys in total darkness otherwise heh
Shame HTC didn't make it adjustable
hi
you can put your thumb over the sensor, press a key and it will turn on the glorious backlightyness
The time can be extended beyond 10 sec with a simple registry change - I found it in this forum, just do a search.
Related
Maybe I do something wrong. Doesnt work on Aoto or Manual. Pls help.
Thx
Saar
Did you check the keyboard settings ?
(in Settings/Personal/Buttons see the last tab called Backlight)
Is it dark when you try and use it? the light won't come on unless the ambient light level is low!
Thanks Tekflow,
Yes I did in both positions, auto and disable auto.
It pisses me off.... the JJ is brand new out of the box, I kindda hoped I'm stupid and I just don't know how to handle it...:-(
Best,
Saar
KB Backlight
Hi Tintoy,
Yes tried it even in complete darknes, but if you disable the Auto KB backlight sensor, there is suppossed to be a KB BL manual button (user manual pg 10, button # 5). Tried both sits. Nada.
Thank you,
Saar
Is it a hardware defect? On my MDP Pro it works very well.
Sounds like a hardware problem, doesn't it? Off to the service centre...
KB BL
Hi guys, faulse alarm, I'm standing in the corner.... It does work but in its own logic, ...only when you actually press a key. I've expected that it should be on/off once the sensor dictates it's dark. Probably my own logic is faulty as I guess it could suck up the battery juice.. anyway, all's OK, thx .
Best,
Saar
that's good news ....
What I did is the following: I unchecked the "Enable Keyboard ..." and put the time to 10 sec for "Turn off if not used...".
So each time I press a key on the keyboard, it illuminates: I found this useful even in full day time in order to see clearly the signs in red. On another hand I did not notice really a significant difference in battery life.
What I did is the following: I unchecked the "Enable Keyboard ..." and put the time to 10 sec for "Turn off if not used...".
So each time I press a key on the keyboard, it illuminates: I found this useful even in full day time in order to see clearly the signs in red. On another hand I did not notice really a significant difference in battery life.
What would be preferable to losing the cool auto-sensor altogether is a reg hack to adjust the amount of darkness that triggers the sensor. It's set waaaaay too dark at the moment, and needs to come on in less dark surroundings. Any ideas?
I to have a exec, and have the keyboard back light set to come on when i push a key, but what is the button next to the voluse slider for as it dose nothing
Thanks
John
If the screen backlight times out, pressing that button turns the backlight back on again. This avoids you having to tap the screen or press a key thus accidentally selecting something you didn't wanna do!
OH! thanks for the info on the button, But i have my screen and backligh both set for 5 mins so asume this buton would be needed if you set the screen to turn off after say 5 mins but the backlight to go off after 30 seconds?
Thanks
John
Is it possible to enable the keyboard light via the backlight button? I believe this would be a very useful function since the keyboard light only comes on when it is very dark and not under poor light conditions.
Probably you will just need to find the registry key that controls the backlight button and then associate the relevant keyboard light trigger to the registry key. :shock:
Thanks, however it is the keyboard light I'm interested in. Do you know how to enable that?
I'm sure thats what Meatychi just said
Regards
RobinB said:
Thanks, however it is the keyboard light I'm interested in. Do you know how to enable that?
Click to expand...
Click to collapse
Go to Start>Settings>Button>Backlight and Disable auto sensor. This would enable the keyboard to light up as soon as you press any key for 10 seconds. If you want the keyboard light to light up more than 10 seconds, follow this instructions from the WiKi pages:
How long will Universal keyboard shine? 10 seconds is a few, change the value of this key and it will shine so long as you wish!
?HKEY_CURRENT_USER\ControlPanel\Backlight\QKeyLedTimeout
OK - I think I need to clarify this. What I would like to do is to be able to turn ON the "keyboard lights" using the "backlight button". I know how to program the backlight button and extend the "light on" time for the keyboard (thanks to previous posts). Being able to turn on the keyboard light by pressing a button (regardless of what the sensor thinks, and not having it come on when I don't need it) would, I think, be an advantage.
Further.....
I do not want the keyboard light to come on everytime I press the key, for instance in bright daylight. The sensor turns the light on in almost pitch black, so that's ok. In poor light conditions the sensor does not turn the light on and it's difficult to see (at least for me), the small keyboard Fn icons. Hence the reason for having some other means of control.
What in fact I need, if anybody knows, is how to trigger the keyboard lights (apart from hitting the keyboard).
I haven't tried any of this, so this is all just speculation, but here is a thought...
I believe that there are programs out there that will simulate a keystroke. Assuming you can find one, and assuming that a simulated keystroke will turn on the backlight, then you may be able to assign the keystroke program to the backlight button. You'd have to pick a harmless keystroke, like the shift key, and it's not pretty, but it may work.
Good luck,
Brett
I remembered reading some posts concerning using the backlight button on the Universal to turn on the keyboard light but I can't seem to find it anymore.
Can somebody point me in the right direction to map the backlight button on the Universal to turn on the keyboard light?
Thanks.
Just stick your thumb over the sensor =)
I think that was the advice in another similar thread.
There is a registry hack to make it stay on longer than the 10 seconds that is selectable from the control panel, mine is set to 30 seconds.
Is there a way to keep the light of the keyboard a bit longer?
Can i do something via registry?
Thanks
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Change the keyboard backlight duration
To change the duration of the keyboard backlight, you can set (example is 30 seconds):
Code:
HKCU\ControlPanel\Backlight\QKeyLedTimeout = 30 (DWORD decimal)
Please note that this may not work on some devices. One such notable exception is the HTC Wizard.
Click to expand...
Click to collapse
Best...thanks.
Now, the second question.....and most usefull for me.
Can we keep the keyboard light on all the time when the device is under charging?
This could be perfect for inCar use while charging.
Nothing ???.. :?
I'm looking for this answer since long time... and, even if I didn't find the answer, I'm glad I found somebody having my same question (even if some months ago)! ... better than nothing ...it's a start.
So anyone knows how to keep the keyboard light always on when device is on charge?
i wish you could change the color
for colorblind (red/green blind) people RED is useless.
PLEASE STOP USING RED FOR ANYTHING!
thanks!
Sky
:shock: I don't know if you mean the red on the flag, the red of vodafone logo or the red of the keyboard... but I will change all of them if you find the answer! :lol:
I changed it to 65535 and the registry editor seemed to accept it, I make that about 18 hours before it times out, nice thing is it still goes out and stays out if you power down, but it goes out and comes back on if you close.
Regards
I've written an app to give independant control of the keyboard lights (and red/green keys), manual on, manual off.
However, gooroo's solution sounds like a better workaround.
V
Still looking for a solution for this one too.
I don't think I can use the change timeout to 65000, because my device doesn't autoswitchoff (disabled that) because the BT keeps f*cking up.
So after 30 sec my backlight just turns off, the device keeps on. Setting the keyboard timeout to 65000 would kill my battery cause it will always be on.
Viper, so what do you propose? You don't want to extend timeout?
V
I've always had set it to 30/60 seconds.
I think the problem is that wm5 doesn't support keyboard backlight like the normal backlight (which has settings for battery/AC)
just trying 65000sec and see if that works a bit. But I have to see if it doesn't drain the battery and all.
-update-
Ok this option works perfect for me.
And yes changing the value to 65000 will let your keyboard light be on permanently (practicaly then)
But your keyboard light auto-switches off when your Backlight does.
So in the car it's on power, so this will keep the backlight on full brightness + always keyboard lights
on battery the backlight goes out after 30 sec and so will the keyboard. But when i touch the screen both will jump on.
Is there a way to keep the light of the keyboard a bit longer in HTC Artemis/P3300?
Thanks
Hello I'm having some problems with my Htc Hermes (I-MAte JASJAM)'s hardware keyboard backlight problem.
whenever i open the keyboard it lights up and when i press a key it goes off (weather its dark or not)
I have tried to uncheck / check the light sensor option in the settings but it didnt help.
I dont want to hard reset could you provide me with default keys which are in
HKEY_LOCAL_USER\ControlPanel\Backlight
Thank you
this seems to be exactly what im after. i am aware that this is an old thread but i am after the settings for the backlight registry as above.
my backlight seems to flicker on and off as im typing, which is rather concerning and irritating. any help would be great.
Tim
Keyboard Backlight
Axeslocked said:
Hello I'm having some problems with my Htc Hermes (I-MAte JASJAM)'s hardware keyboard backlight problem.
whenever i open the keyboard it lights up and when i press a key it goes off (weather its dark or not)
I have tried to uncheck / check the light sensor option in the settings but it didnt help.
I dont want to hard reset could you provide me with default keys which are in
HKEY_LOCAL_USER\ControlPanel\Backlight
Thank you
Click to expand...
Click to collapse
There is a "light sensor" setting? I looked everywhere for it but can't find. I would want my keyboard backlight on 100% of the time if my Hermes is slid open...if there's some way to jury rig that feature, I'd be pretty psyched. Somebody help!