Database Users

Linux On Alpine

hi,
as everybody know, HTC Alpine is the one without Extended ROM unlocker and the sad one there's no WM5 upgrade either. Now seem like Linux development for Alpine is working on.
How about your opinion using Linux on Alpine device? Do you recommended on using Linux? Will any newbies try to learn it from scratch?
Thanks everyone! Thanks [/b]

I'd like to use it. I enjoy using linux at my home pc when surfing net or watching films..
If there will be linux on Alpine and it will work stable especially with phone part - I use it instead of WM.
and if there will be open source of firmware it would be just great...=))

hope there'll be more positif reaction soon.....

Linux on HTC ALpine? This would be very great because there isn't any working WM5 for our devices!

Anybody has gotten the kernel 'zalp' too boot ? I only get a black screen with red/green lines..

sparcling said:
Anybody has gotten the kernel 'zalp' too boot ? I only get a black screen with red/green lines..
Click to expand...
Click to collapse
Ok. That's some progress. I will try to make some changes and post a new kernel image.

ok this might sound like a dumb question but if you install Linux on your pda will you still be able to use tomtom5

emm.... everything will be fine.... :lol:

If you dont mind me asking, Where are you getting the kernel etc for this distro?

My XDA2i Linux Picture
sorry,the server that i used to store my image is out of service now.
the follow link has a backup post:
http://bbs.pdafans.com/viewthread.php?tid=561073&highlight=699%B0%B2%D7%B0linux

jerryxing said:
http://www.infoxmarket.com/v/viewthread.php?tid=3233&extra=page%3D1
Click to expand...
Click to collapse
There are certain things to be fixed in alpine kernel: wifi, cpld irq, phone power, sound power, suspend/resume and so on.
Can you tell us what is working for you, and what is not working ?
I can't rememebr it anymore.

Google's Android on Magician !

Hi all,
Just read an artice on the hack of Google's impressive Android mobile OS. Hackers have used files from the emulator and installed the OS on some Linux phones. I was just thinking that there was a post on this forum saying that Linux could be Installed on Magician. Also Android uses Linux's kernal. So why not give Android a try. Would be great to use the new Android on Magician.
Any clues on how to proceed with the Installation ?

Is it really? I listen about porting on only Linux-PDA but Magican isn't Linux-PDA.

Of course, Android can run on the Magician, BUT never forget that you need drivers for the device - even for Linux!
And that's the problem: if you don't have any information about the chipset etc you will need month or even years to develop them.
If you want to run Linux on the Magician, there is already a project which try to develop drivers for Linux. Last time I read from their progress Linux runs on the Magician with the possibility to use the phone (but no GPRS)...
Use the search if you are interested;-)

Melkor said:
If you want to run Linux on the Magician, there is already a project which try to develop drivers for Linux. Last time I read from their progress Linux runs on the Magician with the possibility to use the phone (but no GPRS)...
Use the search if you are interested;-)
Click to expand...
Click to collapse
It is http://www.handhelds.org/moin/moin.cgi/Magician , isn't it?

So If Linux can be installed, then Android can also be installed. Because it supports all Linux compatible devices according to the hack.
For the DRIVER part, pls check the official Android website-
http://code.google.com/android/
and let us know. Waiting for your reply...
Thanks!

Peoples - a hve WORKING linux on my HTC magician.
name is Angstorm with GUi OpenMoko.
Work - tochscreen,Sound,GSM,blootuth.
thet meens - drivers are exist and work

Can anybody say, where i can download Google's Androuid for ANY platform ?
I'm Find =) Android For Zaurus
it seems to me, For using rootfs on magician we mast change drivers in it
http://www.omegamoon.com/blog/static.php?page=ZaurusAndroid
As me say one man, it takes compiling magican's drivers using Google android SDK.
Some useful links
Буржуйский форум -> http://www.oesf.org/forum/index.php?showforum=158
ЗАУРУС -> http://www.omegamoon.com/blog/static.php?page=ZaurusAndroid
Cкрины -> http://androidzaurus.seesaa.net/article/75516785.html
Angstrom на Qtek s110 -> http://grigio.org/howto_openmoko_htc_magic...dual_boot_wince
Немного о портировании для OMAP -> http://elinux.org/Android_on_OMAP
Sory for my English =)

does anyone know how to actually download the Android platform? regardless of phone model or drivers? or is it just included in the SDK and you gotta compile it yourself? If I can somehow get my hands on a copy of the image I'll probably end up spending the next 3 weeks trying to flash it natively into the ROM

The Android sources can found on this page: http://code.google.com/p/android/downloads/list

It is only kernel. Without drivers.

Found a new article for search on "Android on HTC", got this:
Android Kernel Found, Android on HTC Kaiser imminent
It says, that the kernal works only on MSM7200A chipset for now.
Take a look, link: http://fandroid.net/content/android-kernel-found-android-htc-kaiser-imminent

what i cannot understand is:
if there is an working linux kernel (http://wiki.xda-developers.com/index.php?pagename=MagicianXanadux) than android should be executable also!?
All necessary driviers shold be available.
So why should it be impossible to have a running android on a Magician?
cheers
aitsch
p.s.: the Magician is a very fast device. maybe android is running well on it.

UPDATE: Google has released a new version of Android, v0.9
Any updates on running Andriod on Magician ?
I could run Linux (Openmoko) successfully.

yea! Android 1.0 it very good
we need this

linux can run on a magician and u can use phone on it but no sms and it's full of bug's

Hi all,
I have tried to download the angstrom linux and follow the instruction from this site http://linuxtogo.org/~ph5/magician/....
but I always had kernel panic when start booting the linux, after then I found out the unzipping wasn't successful there is an error occurred during unzipping.
Does anyone ever encounter the error when unzipping? your help would be much appreciated. thank you
wayne

Hi everybody,
are there any news on running android on magican. Did anybody manage to get it running?

w00t!
I for one cannot wait to boot winCE on my Magician! Id love to put ANDROID on it! from what it looks like they are only 80% done!

I have opie II running on magician (http://linuxtogo.org/~htcpxa/htcmagician/)
and it runs perfectly (except a little bug eith the menu).
And here is a list what works in linux (http://www.handhelds.org/moin/moin.cgi/Magician)so android should work

header2k said:
I have opie II running on magician (http://linuxtogo.org/~htcpxa/htcmagician/)
and it runs perfectly (except a little bug eith the menu).
And here is a list what works in linux (http://www.handhelds.org/moin/moin.cgi/Magician)so android should work
Click to expand...
Click to collapse
Interesting, I'll take a look! What are the bugs you personally notice?

Android on ARM920T phones? (like Trinity.. ;-))

Dear all,
as I wrote on this other post (excuse me for crossposting - please mods to close the wrong-placed one):
http://forum.xda-developers.com/showthread.php?goto=newpost&t=384850
there are two guys that recompiled Android for ARMv4 processor - like ARM920T, the trinity processor!!
Here you have the links:
http://benno.id.au/blog/
http://perpetual-notion.blogspot.com/2008/10/android-freerunnder-updates.html
They are working on the Freerunner and Neo1973 devices.. but the processor is the same..
Anyone out there wants Android on our beloved trinity?
At the moment I have no spare time (and skills) to take the challenge.. but I hope that someone will do.
I think that with the source code the CLZ and Thumb mode issues are completely addressed.
Anyone could confirm this to me?
Best regards,
s

Hi,
i'm also interested to see android on my htc hermes. i'm waiting benos new blog entries to see if he was able to run the code on "Neo1973".
What is the diference between htc hermes and htc dream (g1) regarding other chips beside the prcessor?
i don't think that drivers included in android can cover all chips in hermes. can someone maybe make an list of same and different devices(chips) in this 2 devices?
thanks

G phone?
So this is the same OS that the G phone is sporting yeah?
If The flashing process isn't harder than the current process then I'd be up for this. Also will it brick the phone?
Need some people to test.

Great Topic!
More information about this here:
http://lists.openmoko.org/nabble.html#nabble-td1368755|a1368755

http://review.source.android.com/user/sean,,mcneil.com
Since the openmoko is very like the p3600 I will give these patches a try. Let you know!

That would be awesome !
Please tel us your progression.

I'm waiting for a Android ROM for my Trinity ^_^

This is what we can try. The openmoke images are out. Since the openmoke is very like the p3600 we could give these images a try. The images are located over here.
http://people.openmoko.org/sean_mcneil/androidfs.jffs2
http://people.openmoko.org/sean_mcneil/uImage-android
We need haret for the images as well.
http://www.handhelds.org/~koconnor/haret/haret-0.5.2.exe
The thing we also need is to have a proper default.txt for haret. Who can help?

Hi piethein,
This will replace the rom we have installed in the trinity or is like an emulator running under wm ?
We dont loss any wm rom that we have installed ?

Dear all,
here you have some (bad) news:
http://groups.google.com/group/android-porting/browse_thread/thread/906dcae21176d4e9#
at the link above you will find a thread I started in adroid-porting developers group.
http://groups.google.com/group/android-porting/browse_thread/thread/0b3743f8151783f6#
at this link there are other infos, but let me report two msgs:
shaice:
Dear all,
sorry to bother you with (probably) silly questions but..
I own a HTC trinity that use the same ARM920T processor of Freerunner.
I saw benno's and christopher's posts on their blogs...
Is there any chance that your binaries will run on other ARM920T
phones?
Thank you in advance for any answer.
Best regards,
s
Christopher Friedt:
Hi Shaice,
In short, no (for now...)
Chris
sigh sob!
Now I'm searching for some fresh news.
Stay tuned!
s

uhmm reading somewhere in the group I found this post:
Jean-Baptiste Queru
3 Nov, 01:14
The shipping G1s have 192MB. Earlier development devices had 128MB,
and that wasn't quite enough to smoothly run the applications that
ship with the G1. Even if all the device's RAM could be allocated to
Android (no baseband, no framebuffer) 64MB would probably be very
tight, to the point where even foreground applications would risk
getting killed because of low memory conditions (the browser
especially comes to mind). In 32MB the system is likely to be
thrashing for memory even before it's done starting the system server
(if it can even start it at all).
JBQ
Mmmmh no good news for us.. :-/
s

Hi there,
basically these are great news!!!
piethein said:
This is what we can try. The openmoke images are out. Since the openmoke is very like the p3600 we could give these images a try. The images are located over here.
http://people.openmoko.org/sean_mcneil/androidfs.jffs2
http://people.openmoko.org/sean_mcneil/uImage-android
We need haret for the images as well.
http://www.handhelds.org/~koconnor/haret/haret-0.5.2.exe
The thing we also need is to have a proper default.txt for haret. Who can help?
Click to expand...
Click to collapse
....but forget about running exactly these images on your trinity units.
It won't work
I don't want to digg your hope but there's a lot to do to make it real.
First:
You'll need a kernel that suits to trinity and offer some features the android OS needs.
Second:
You'll have to modify the image in jffs2 format to get loaded on trinity or build up a tricky environment to mount these image files after booting the kernel.
Have fun!
scholbert

Android on Trinity wanted!!
now that the full Android code is out it's possible!!
we can have Android on Trinity!!
please help... I cannot stand anymore WM!!

IMHO there is no enough memory to run smoothly android on trinity...
but stay tuned..
s

Dear all,
there is no hope for trinity users like us to see android running on our wonderful device.
As stated here:
http://groups.google.com/group/android-internals/browse_thread/thread/788c201e75ca7351
Android don't run on the ARM920T used in Neo1973.
In the following site
http://en.wikipedia.org/wiki/ARM_architecture#ARM_cores there is a table
where are described all the ARM cpu.
Android framework is compiled for the ARMv5 architecture version, so run on
the all the processors that belong to this architecture version and also in
some cpu of the new architecture (ARMv6/v7).
Other information can be found on this site
http://elinux.org/Android_on_OMAP#Real_hardware.
Best Regards,
Andrea Bernardi
Click to expand...
Click to collapse
:-(
bye all
s

ehm...
on HTC vox wat i was using 2 weeks ago they builded a ADNROID rom !!! But they have only clock working but working !!! (no gsm,no edge,no menu,....)
http://forum.xda-developers.com/showthread.php?t=368014&page=14

didoop said:
on HTC vox wat i was using 2 weeks ago they builded a ADNROID rom !!! But they have only clock working but working !!! (no gsm,no edge,no menu,....)
http://forum.xda-developers.com/showthread.php?t=368014&page=14
Click to expand...
Click to collapse
a new step per day, some time good new, other time bad news..... lets get hope that android will run on trinity...

Researching Linux / Android ROM

Hello everybody,
I'm Johan, I live in the netherlands and i'm doing a study Informatica->Software Engineer. For a schoolproject we have to write an Android Application, though i don't have Android running on my telephone natively. So i searched the internet and found out that on the XDA forums its all about custom roms and that there are some Android Roms available. Unfortunately nothing for my MDA Compact/HTC Magician yet.
After asking arround a bit and searching all over the internet I figured nowone actually was bothering to further investigate Android for Magician.
So even though I have no idea if it will ever gonna work i'm gonna try to document as much as possible, and I hope others might join this topic and give some (usefull!!) feedback.
These websites I think are the best place to start, as I don't have any experience with ROMS or Android-OS its gonna be a challenging task but if you guys have any idea's, suggestions or websites where we can find more information feel free to post comments.
Startpage for Magician info:
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
HaRET bootloader working on magician:
http://www.handhelds.org/moin/moin.cgi/HaRET
http://www.handhelds.org/moin/moin.cgi/HaRET_20Documentation
Linux kernel for Magician:
http://www.htc-linux.org/wiki/index.php?title=Kernel#Kernel_for_intel_PXA_based_devices
Current status for linux kernel:
http://wiki.xda-developers.com/index.php?pagename=MagicianProgress
http://www.handhelds.org/moin/moin.cgi/Magician
Source code for Android:
http://source.android.com/
How to build Android OS:
http://source.android.com/porting/build_system.html
Compatiblity test suite:
http://source.android.com/compatibility/cts-intro.html
Any feedback is apreciated but please don't make it like "nice, when is it finished?" or "its impossible!"
as I have no idea about both of those 2 comments yet, I'll have to figure that out on the go.

It should be possible, someone already ported android to pxa270!
http://www.mask.org.tw/demo.htm

need to throw in a kernel guess i ll fetch yet another magician if that happens!!!

Hi header2k and evildarknight, thanks for the input.
My chinese/tw isn't to good, so i googled for android and pxa270 and found the following website, no idea if its any usefull (currently not at home, and my datalimit on my laptop dislikes downloading 1,3GB so i'll have to see what it is when i'm at my desktop again.)
http://www.ntut.edu.tw/~wyliang/

This looks interesting, if it comes to testing, you can contact me!

guess my chinese aint better
can't somebody anybody compile the android froyo kernel 2.6.32 for the magician which seems to be inline with ph5 dev???

I can't read chinese either, but i wanted to link to the pdf files:
http://www.mask.org.tw/data/Android_Porting_on_PXA270.pdf
http://www.mask.org.tw/data/BringUp_Android_on_PXA270.pdf (he used files from: svn co https://android-pxa270.svn.sourceforge.net/svnroot/android-pxa270 android-pxa270 )
He uploaded his work, too(with two mirrors, after 原始碼 (1.3GB) 下載位置: )
His machine:
[email protected] <-- identical with our magician
64MB RAM <-- identical with our magician
32mb ROM <-- Isn't important because he used an external usb-stick with chroot - We can use our sdcard and haret
Toppoly TD035STEB1 <-- identical wth our magician

Setting up Dev-Team
So this proves i guess its a done deal already
But is it then just theoretically/closed project? or did he indeed release his sourcecode as well? Sourceforge SVN shows there isn't anything deposited.
Anyway, still want to use this on my telephone, no idea what it takes to use/modify his work. Anyone interested in actually joining the project-team to make it run on a telephone? cause in the pics in the powerpoint i see some laptop and some mainboard and touchscreen but not a MDA Compact/HTC Magician yet.

There are copies of the project www.mask.org.tw/data/release-sourceforge.tgz and www.ntut.edu.tw/~wyliang/release-sourceforge.tgz. I don't have access to a linux box at this moment. Need to fix my PC before working on android.

Hello, This is Mask from http://www.mask.org.tw
Hello, I am Mask and I found there are some traffic from xda-developers to my website, so I come here and found there are some discussion of my work before in last year.
I had open an android project for pxa270 on sourceforge, but I didn't know how to upload my source code to sourceforge, so I put the source code on my website and mirror sites.
I hope maybe I could help you if you are interest in "android porting" and some related topics.

mask.chung said:
Hello, I am Mask and I found there are some traffic from xda-developers to my website, so I come here and found there are some discussion of my work before in last year.
I had open an android project for pxa270 on sourceforge, but I didn't know how to upload my source code to sourceforge, so I put the source code on my website and mirror sites.
I hope maybe I could help you if you are interest in "android porting" and some related topics.
Click to expand...
Click to collapse
Yes, i have a question. Do you have a pxafb.c driver that works with android and the 2.6.32 kernels?

sorry about that I have no time to maintain my android project for pxa270, and now I have no plan to keep to maintain it, maybe we could upload whole developing source code including all svn reversion from begin to now, do you know how to import svn to sourceforge ? thanks a lot.

Here is some information on SVN and sourceforge.
http://haacked.com/archive/2006/02/22/QuickstartGuidetoSubversiononSourceForge.aspx some older howto from 2006 not sure if its up to date
http://sourceforge.net/apps/trac/sourceforge/wiki/Subversion Official sourceforge howto.
http://tortoisesvn.net/ svn client

Kernel
Can someone test this kernel and see if it works as I do not have a magician to test it with.
If it does boot can you follow the steps posted here to see if android boots...
http://forum.xda-developers.com/showthread.php?t=658664

notime2d8 said:
Can someone test this kernel and see if it works as I do not have a magician to test it with.
If it does boot can you follow the steps posted here to see if android boots...
Click to expand...
Click to collapse
I try to use kernel on Qtek S110(WM 6.1 by Cotulla), but get freeze screen on line "Jumping to Kernel...". When i use zImage from thread "Android 1.5 Cupcake on Universal" - again freeze on line "Jumping to Kernel...". Any ideas?
If you need to test something on Magician, contact me by ICQ 258113792.

Pavel A Safonov said:
I try to use kernel on Qtek S110(WM 6.1 by Cotulla), but get freeze screen on line "Jumping to Kernel...". When i use zImage from thread "Android 1.5 Cupcake on Universal" - again freeze on line "Jumping to Kernel...". Any ideas?
If you need to test something on Magician, contact me by ICQ 258113792.
Click to expand...
Click to collapse
Make sure you have the radio turned on and not in airplane mode and wifi and bluetooth turned off. Also the correct machine type 875 in the startup text file or 855 if using the one for the universal.

i think set MTYPE 875 should be the right one

notime2d8 said:
Make sure you have the radio turned on and not in airplane mode and wifi and bluetooth turned off. Also the correct machine type 875 in the startup text file or 855 if using the one for the universal.
Click to expand...
Click to collapse
When radio is turned on, Linux loading and stop on next lines:
1. With kernel for Magician
...
mmc0: new SD card at addess 41a8
mmcblk0: mmc0:41a8 SD01G 982 MiB
mmcvlk0: p1 p2 p3
Waiting for root device /dev/sdb2...
I wait more then 5 minutes, but nothing happens.
2. With kernel for Universal
...
ds1wm: ds1wm: reset failed
Device vibrate all time and after last line turn off display.

Pavel A Safonov said:
When radio is turned on, Linux loading and stop on next lines:
1. With kernel for Magician
...
mmc0: new SD card at addess 41a8
mmcblk0: mmc0:41a8 SD01G 982 MiB
mmcvlk0: p1 p2 p3
Waiting for root device /dev/sdb2...
I wait more then 5 minutes, but nothing happens.
2. With kernel for Universal
...
ds1wm: ds1wm: reset failed
Device vibrate all time and after last line turn off display.
Click to expand...
Click to collapse
Ok, don't use the universal kernel, from what you posted it seems that the kernel is not pointing to the correct memory card path in the startup text file or try reinserting the card.

If anybody knows how to build kernels i can provide the files and walk them through how i built the kernel for the universal which i have just gotten a very slow and unusable eclair (mostly due to hardware) working. I think this is the most i can help out as i don't have a magician.

[IDEA][Installer] Astoria installer for W10M Unsupported devices

Thinking of a new method of installing AoW, and I think I have found a way to install AoW without the Dev update on the latest release of W10M.
How many of you would want something like this done? It would require full interop/cap unlock with 1st/2nd/3rd party permissions unlocked as well using the Root Tool.
I am starting research on this now to see if it is worth while.
Let me know peeps!

If this would manage to skip the device hardware check and allow us to run project astoria on 512MB RAM devices then I am really interested and ready to test.

Thanks, I am still doing a lot of research to see if this is even possible, but I have the AoW files for P.A. I just need to figure out the registry entries, and where each file goes.
Might be awhile, but I will let you know when I have an alpha installer.

sandix said:
Thanks, I am still doing a lot of research to see if this is even possible, but I have the AoW files for P.A. I just need to figure out the registry entries, and where each file goes.
Might be awhile, but I will let you know when I have an alpha installer.
Click to expand...
Click to collapse
I already tried adding the files and registry entries myself, some of the registry entries can't be written, at least not by any registry editor released until now, also did the downgrade and update with an other device's entries trick to try to enable it so I now seem to have all the aow files in their place and the entries are also there (at least the entries I know about) yet it doesn't work so at least for users of devices with 512MB RAM this might not be possible (I think that somehow the android build/hyper-v implementation/something else check the hardware and don't allow it to boot on 512MB RAM).
I am still willing to test but I think that even if you manage to find and write all the registry entries you might need an other tester with a (hardware wise) better device to actually find out if it's working or not.

Ranomez said:
I already tried adding the files and registry entries myself, some of the registry entries can't be written, at least not by any registry editor released until now, also did the downgrade and update with an other device's entries trick to try to enable it so I now seem to have all the aow files in their place and the entries are also there (at least the entries I know about) yet it doesn't work so at least for users of devices with 512MB RAM this might not be possible (I think that somehow the android build/hyper-v implementation/something else check the hardware and don't allow it to boot on 512MB RAM).
I am still willing to test but I think that even if you manage to find and write all the registry entries you might need an other tester with a (hardware wise) better device to actually find out if it's working or not.
Click to expand...
Click to collapse
Well I have a Lumia 640 which is not supported yet, but will be in the future. 1GB RAM Quad-Core

i can test if you want i have a lumia 625....

UPDATE: I think I am getting close to a solution. if someone who has astoria on their device already could you rip all the files from "C:\Windows\System32\aow" from your phone, zip them up and send them to me in a private message? It would be of GREAT help to make sure I have the latest files.
Thank you.

Old post, but I'm interested.
I have the files, go pm.

I would venture to say anyone with a high spec windows 10 mobile device is extremely interested in this. I think heathcliff is researching this. if astoria could be ported to the latest build of windows 10 mobile..

barc0d3 said:
I would venture to say anyone with a high spec windows 10 mobile device is extremely interested in this. I think heathcliff is researching this. if astoria could be ported to the latest build of windows 10 mobile..
Click to expand...
Click to collapse
I made some tests but I was stuck on adding new values in registry.. But I had all the values to put and all the files and other modifications

valentinbreiz said:
I made some tests but I was stuck on adding new values in registry.. But I had all the values to put and all the files and other modifications
Click to expand...
Click to collapse
Realistically this would only work on Nokia, which requires a special DLL to be used in the project to set/create registry items.

sandix said:
UPDATE: I think I am getting close to a solution. if someone who has astoria on their device already could you rip all the files from "C:\Windows\System32\aow" from your phone, zip them up and send them to me in a private message? It would be of GREAT help to make sure I have the latest files.
Thank you.
Click to expand...
Click to collapse
You need a lot more than that, me and other people are working on this. I already pushed all the astoria files and dlls, and restored the service key and values to trigger the dlls. It needs more than that to work in newer builds, when i mean newer builds i refer to 10586.x or higher .

xxJMarian said:
You need a lot more than that, me and other people are working on this. I already pushed all the astoria files and dlls, and restored the service key and values to trigger the dlls. It needs more than that to work in newer builds, when i mean newer builds i refer to 10586.x or higher .
Click to expand...
Click to collapse
Hey thanks for the reply, I already know this, but thanks for the information! However, I have long since abandoned this project (see date of my OP and the post you quoted). Cheers!:good:

Be careful
sandix said:
Thinking of a new method of installing AoW, and I think I have found a way to install AoW without the Dev update on the latest release of W10M.
How many of you would want something like this done? It would require full interop/cap unlock with 1st/2nd/3rd party permissions unlocked as well using the Root Tool.
I am starting research on this now to see if it is worth while.
Let me know peeps!
Click to expand...
Click to collapse
Well... I have a Lumia 925 running latest Windows 10 Mobile build ever (Redstone 4) Build 15254
But be careful!
You may brick a lot of devices...

If you really want to work on this, i can give you all the files i've got on my research aswell as the registry keys that you can import with interop tools. Since i had to format my pc and such, didn't install anything related to windows phone, so i left the project in the trunk but, as i said, if you really want to work on this i can provide you with the files and keys.

Yep!
xxJMarian said:
If you really want to work on this, i can give you all the files i've got on my research aswell as the registry keys that you can import with interop tools. Since i had to format my pc and such, didn't install anything related to windows phone, so i left the project in the trunk but, as i said, if you really want to work on this i can provide you with the files and keys.
Click to expand...
Click to collapse
Well... I will take it!
Just upload it to a download server for example MEGA.CO.NZ
And and the download link to me via private messages.
If everything would succeed and I will finally make it to the finish, I will make a program that will install Astoria onto your phone via just pressing a button!
You can also check out my other software that I made and published to xda developers, I will be very happy if one of them will help you fixing problems with your phone (if you have problems of course) or installing Windows 10 Mobile onto your phone with just 3 clicks!
Good luck!
Sincerely
Gor Mirzoyan
(founder of XWintech Corporation)
(Birth year: 2005, yes I am actually 13 years old, it's not a joke)

I hope you manage to get this working!
Ever since its announcement I was hoping to see the day it gets out!

How's the progress? Nearly done?