Screen grab without ActiveSync - 8125, K-JAM, P4300, MDA Vario General

Hi guys and gals,
I need to create some screenshots of a few settings in the ActiveSync | Configure Server setup box. However, you can't access this menu while ActiveSync'd, and my screen grab program requires an ActiveSync connection
Is there any software that will take screen grabs and save them on the Pocket PC so I don't have to be connected by ActiveSync?
Many thanks,
Andy

Check the following thread for info on programs that allow you to take screen shots on your device: http://forum.xda-developers.com/showthread.php?t=275930&highlight=screen+shots
I use XnView Pocket.

Many thanks for the link to the thread, was exactly what I was looking for but was unable to come up with that no matter what search string I tried

I knew Menneisyys wrote a thread on it a while ago, so I searched under his ID. He often puts up great reviews of software/freeware/games . . .

Related

How to set up a WiFi network?

Hi,
I have a WiFi Netgear DG834GT 108 Mbps Router. No problem with internet access...but I would like to share files with my PC. How can I do? What SW should I need on my JJ and hoe to set router and JJ both to get them work?
THX so much for any help!
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
bryson said:
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
Click to expand...
Click to collapse
Thx for your reply,
I just want to use Resco File Explorer plug in called "My Network"...but it doesn't map any drive. I also have tried to change JJ setting in "configure network Adapters/My network card connects to" from "the internet" to "Work", but coming back to RescoExpl. and trying to Map Drive option, it didn't find anything once again.
Please help me with config if you can.
THX a lot!
ok, you have resco file explorer, so open it up, hold your styli on the My Network tab on left, and select map drive. A new window will open as it searches for your home network/pc shared foler etc. if it fails to find it like that, check you 'Hive' PC's name and make sure you have a folder selected to Share. Try that and let me know. (PS make sure wifi is on first on both exec and router!)
Thank you very much I DID IT!
:lol:
Well Done!!! Thats great glad to help, now enjoy streaming your music and videos to your exec whilst in the bath/garden/sofa!!
My good friend...
can you help me to let my JasJar print via WiFi??? In other words, is it possible to launch a print from JasJar via WiFi, by shareing my PC printer?
Am I asking too much?
:wink: :wink: :wink:
Hey hey!
aha! The only way i have ever done it unfortunatley is through terminal services client. So, open say, a word document from either your server PC or on your pocket PC, and save back to the shared on your desktop on your server PC and then via Terminal Services remote desktop and open the doc from your JJ screen and send to print from you server PC!
Long winded I know, anyone else got a better solution?
Hope that helps!
Uhm..I still have not tried your solution...but do you think there is any third party software that can do it, simply shareing printer via WiFi?
ill have a look, never really had a need myself, but ill have a look around, might be a good thing! Ill post if i find anything ok
Ok, thx...I'll take a look around too. I thought it would be useful for example if you receive an email on jasjar and you should print it to have it like a document...without further steps, directly from JJ...
HP has printer drivers for PPC!
They even support some Canon printers..
uhm..I have found Print Pocket CE, but it doesn't support WM2005 Office files, and PrintBoy...but I don't' know if it is compatible...
Any suggestion?

Browse Wireless Network

Hi every one,
im using V-Mobile Software Network Browser on my k-jam to try to connect to my wireless network, so far im having no luck. i can connect to the internet ok but when i use Network Browser it just shows my network as unknown and does not list any of the computers on the network. has anyone had any luck with connecting to there wireless network to access resources on there computer if so please let me know how lol.
Thx
After a lot of fiddling about and a great deal of searching on these forums, (which takes forever trying to figure out how other people have reffered to ones problem) Yes, Resco Explorer, there is a manual on their website which explains how to map network drive. But easier and free, internet explorer, in address bar type //your machine name and return.
This of course assumes you have set up a shared folder and guest usage on your pc. Aleternatively you can just bang your head on the keyboard for 2 days until you don't care anymore! Which was my first course of action.
Bully said:
After a lot of fiddling about and a great deal of searching on these forums, (which takes forever trying to figure out how other people have reffered to ones problem) Yes, Resco Explorer, there is a manual on their website which explains how to map network drive. But easier and free, internet explorer, in address bar type //your machine name and return.
This of course assumes you have set up a shared folder and guest usage on your pc. Aleternatively you can just bang your head on the keyboard for 2 days until you don't care anymore! Which was my first course of action.
Click to expand...
Click to collapse
Top tip but it does not seem to work on my Vario... that been said I wonder if you create a short cut if you can by pass IE altogether ?
Terran
i know its an obvious solution, but as you dont say you have done it already:
[*] Assuming you are ruinning winXP - run the network setup wizard and enable file & print sharing (and share a folder or 2)
[*] If not running XP, either use the XP wizard (if you have an XP CD or friend who has one) or manually setup wookgroup LAN, enable file & print sharing and share a folder
Oh, and make sure you dont have any firewalls getting in the way (windows XP inbuilt one "should" automatically open the file sharing when the network wizard is run)
Beeble said:
i know its an obvious solution, but as you dont say you have done it already:
[*] Assuming you are ruinning winXP - run the network setup wizard and enable file & print sharing (and share a folder or 2)
[*] If not running XP, either use the XP wizard (if you have an XP CD or friend who has one) or manually setup wookgroup LAN, enable file & print sharing and share a folder
Oh, and make sure you dont have any firewalls getting in the way (windows XP inbuilt one "should" automatically open the file sharing when the network wizard is run)
Click to expand...
Click to collapse
... I think what it is that I have a VERY secure network / domain here ( Deal with IT security you see )... so if I remove security I'll bet it will work.. just not had time to try.
That been said thanks for the suggestion
Terran

Accessing Citrix through Citrix Secure Gateway

Hi,
Im experiencing trouble accessing www.haltonvpn.co.uk through my Vodafone v1640.
This links to our CSG box to allow me access to a Citrix session through terminal services.
The link works fine through my XDA using GPRS, but i get a white screen on the universal.
Any ideas anyone?
Thanks in advance,
Ok,
After lengthy discussions with our account manager at Vodafone, it would seem that the standard IE browser that ship has some faults accessing Https:// sites (such as internet banking). Obviously this isnt acceptable for what we need!
I'll let this board know when the faults are resolved. Hopefully i may be able to post a flash which fixes these problems.
I have installed netfront browserwhich seems to aleviate some of the problems, but it is still definitely no where near useable!
I'll let you know how i get on.
why you do not install the ICA client for winCE?
- You have to download the newest version in english provided from Citrix
- don't forget the installation of your certificate on the pda
- configure your WinCE-ICA-client like the Win32-ICA
This is a well running solution for me and my colleagues! OK it's not really easy to configure the client, but your admins will assist you!
greetings
pug304
CU at Citrix Summit in Orlando!
I tried that today, but couldnt access the link to our external facing Citrix Secure Gateway because its a Https:// site!
Mike
hi Mike,
this should not be a problem! The CSG beyond the IIS is the point! And you're able to configure the ICA-client to use https! How i mentioned above, the configuring of the client isn't simple.
Perhaps some steps to configure the WinCE client!
1) don't forget the certifiate, suggest you've installed the client
2) create a new connection (the next points are reachable at creation or with button edit)
3) goto edit firewall settings, enter the FQN URL from the csg and the port, per default it's 443
4) goto edit options, session reliability MUST be turned OFF - this is really important because of the actual csg DON'T support this feature
5) goto server settings:
-select protocol SSL/TLS+HTTPS
-enter the INTERNAL FQN URL of a internal citrix server, it is really important to enter the complete FQN URL = DNS name
-now you should be able to refresh the servers-list also the PA-List, if you're not: enter the server-name or the PA-name manually
ready steady go!
hope you understand all the it-stuff, if not: write a new post
pug304
We have it working
It seems that you cannot even access the Page
This means you need to install the certificate
Login and you will see the Icons irrespective of whether you have the Client or not You will just be able to download the ICA files instead of launching it
The ICA Installation put some files in \windows\startup that needs to be removed
Further almost no Config should be done on the Client side
PIE and Opera 8.50 works
get used to squinting and working in akward places!!!! 8)
Regards Frikkie
I tried accessing the Page and can get to the login screen - I see that you are using a Public CA , so the certificate are already trusted. If the problem is further on , it might be that you are accessing the access center which uses activeX controls not supported by WinCE,
We got around that by makng a seperate Page for PDA that only uses CSG and not access center
Hope this helps - let us know exactly where you get stuck!
Regards
Frikkie
I cant even access the link www.haltonvpn.co.uk
Whenever i enter this link i just get a blank white screen on the V1640.
It works fine on my XDA but not on the V1640.
Vodafone told me that they couldnt help me and that QTEK couldnt help either as we havent bought 50 devices!
Any thoughts would be most useful

ActiveSync every 5 minute

Hi, new to the form. This is a useful place!
Am with O2 Mini S, 1.5.70, AS 4.1, XP sp1, Oulook 2k3.
Does anyone notice AS runs every 5 minutes? I first tried the Add Server Source hack by WM5 Axim users, but didn't work. I couldn't find any registry entry that relates to the sync frequency.
Apart from suffering the unplug usb and wizzard freeze problem seen here. AS syncs every 5 minutes really annoys me. I need to rely on AS's tcp via bluetooth to use networking on the device and AS is heavy weight process.
So far, I have some solutions:
1. kill the wce* processes, which leaves the device connected (TCP stack still works, USB charges) but AS on the desktop says disconnected. Your wizzard's AS will still TRY to sync every 5 minutes, but it'll return quickly because the desktop ain't listening. But remember to double click AS on your desktop when you need to sync stuff again.
2. Replace the useless MS bluetooth stack with the widcomm stack taken from the Atom? Then use the PAN profile for connection. Disconnect PAN and run AS via bt from the device when needed. (But PAN on PC is not always possible as company laptops will almost certainly not allow internet connection sharing, never mind allowing you to have BT PAN enabled in the first place)
So afterall, does anyone know how to re-enable manual syncing? Some registry hack? AS 4.x is such a big step backward, I already have to disable firewall and VPN service from my company laptop when connecting, AS 3.8 was so much better when I was with an ipaq or SP3i. May be a sticky with enough post on it to get M$' to fix AS.
There are numerous threads relating to AS 4.1 and starting every x mins .... Please try to search next time....
Anyway, the simplest way is to create a dummy server entry in AS (On the mobile device) then when creating it uncheck all the "MAIL / NOTES / ..." entries in the advanced section. Once the Server has been created you can modify the server sync to set it to never.
For more info have a look through this forum for other threads on AS 4.1.
sorry if that has been talked about alot before, I suspected it. But I did a search before and couldn't find related stuff on this site, plenty of firewall/VPN stuff found which I also had a problem with...
The Add Server Source hack has been widely referenced in the dell Axim WM5 forums. As I mentioned, it didn't work for me, my ROM is very recent, as the phone is new for two weeks. I couldn't find any entry in the device registry that suggests it will run at any schedule! Although I can see peak time settings...etc but none of the scheduling options in registry.
Am really wondering if this is a problem with the specific ROM.
Yeah, I aplogise, am I bad, didn't read all your post....
Have you got any other apps that try to update regularly like Weather plugins etc?
I can agree with humps on that.
I've got a new k-jam and tried to stop AS4.1 from syncing when not connected to pc, by creating a fake server then through options setting it to manual sync.
No luck however as it still comes up in the list of running programs whenever i check :evil:
fix for constantly syncing when USB-connected
Sorry in advance if this isn't the right place for this.
I was so mad about Activesync 4.5 re-syncing during two out of every five minutes when connected via USB that I implemented a workaround that might prove useful to others as well. The result is that you can click an icon on your desktop computer and instantly change whether your handheld willl connect to its partnership for syncing or as a guest for doing other work (or just charging). Most of my data syncs wirelessly with an Exchange server anyway, and MightySync and PocketController function independent of the ActiveSync partnership. Ah, the peace ;-)
Here are the steps:
1. Change HKLM\Software\Microsoft\Windows CE Services\GuestOnly to "1".
2. Export HKCU\Software\Microsoft\Windows CE Services\Partners\[your device's partnership key] to a .reg file with name like "partnership.reg".
3. Create a batch file or script to stop WCESMGR, import the .reg file (regedit /s = silent) and restart WCESMGR. Name it like "partnership.bat".
4. Make a copy of the .reg file, edit it to *delete* the reg info (place a minus sign inside the beginning bracket of each key/subkey name), and name it like "guest.reg".
5 Create a new batch file or script to stop WCESMGR, import the guest.reg file and restart WCESMGR. Name it like "guest.bat".
6. When you execute "guest.bat," your device's partnership is deleted, and with the "GuestOnly" key enabled and no partnership found, ActiveSync will connect it as a guest without asking. After you execute "partnership.bat," ActiveSync will be ready to recognize your device on connection and sync.
7. Now, create a batch file or script that allows you to choose which .bat to execute, so you have one thing to click to go back and forth between connection types.
As will be obvious, I'm not a programmer AT ALL. I use pskill to clobber WCESMGR, and CHOICE.EXE copied form Server 2003 to choose connection type. It could be done more elegantly...but it sure works.
Only caveat: Later changing of syncing settings might require re-export of .reg key and recreate/edit of.reg-delete file.

Remote Desktop: Saving multiple connections

Hello all,
I use the remote desktop on my HD2 to connect to different servers/PCs for clients that I support, but it appears that it only saves the last used connection details so I have to enter the 'computer' name and login details fresh each time I want to connect to another system...
The computer entry box appears like a combo box with the drop down arrow but I have not found a way of making it store multiple entries... I've searched the forums and elsewhere but have not found the same question asked (and therefore answered) so figure either most people only ever connect to the one system or I am missing something so blindingly obvious that no-one else has needed to ask so I must be an idiot...
Anyone know how to save multiple remote desktop connection entries? Thanks in advance for any pointers.
Rocky.

Categories

Resources