Has anyone used Powercheck before? I have a question regarding the "LCD off" function, which has the potential to be quite a handy tool:
How do I switch the screen back on again without using the power button? It allows you to assign a two-button press configuration to the action, but only gives the available options of "Button 1-5". Which button is which!?
Thanks,
Rich
all the
screen toggle programs i've used react to
all buttons and screen preasure to turn on the screen once more
Doesn't work with this one unfortunately.
Thanks anyway.
what about pressing contacts button ?
that sure works with the one i'm using now
Tried everything to no avail.
I'll probably go and look for another app. Any ideas? I want to be able display battery, storage and memory levels on the display screen as well.
pocket plus v2 does all of that i believe
but some people say it cause them problems on their xda2
others say it dont
Nice one, thanks Rudegar.
i managed to figure out that button 1 is the calender button (right side of earpiece), and button two is the contacts button (left side). all good. thanks again Rudegar.
Hi,
I do not own Touch HD, so I cannot test, but the button area bellow should be touch sensitive. Why did not somebody used it as D-pad? Dragging up/down left/righ as the GScroll (http://www.mobilesrc.com/GScroll.aspx) for Diamond? It is not possible to detect different touch positions on the same button so with only one row of buttons there is no way how to do up/down gestures?
Thanks you for your explanation, Jan
very good idea, i'll check !
edit : doesn't works somebody to code it ?
I've tryed it, not working for me on my HD (black pearl light rom) , but an app like that should be the missing part for HD.
This is a FANTASTIC idea.
Anyone willing to give it a shot and code it?
I don't think this is possible, because those "touch sensitive buttons" aren't capacitive buttons, they are just normal button much more sensitive than usual. You can see it your self by pressing them with the stylus: it works, and it wouldn't if they were capacitive.
for sure the button are not capacitive i did the same test too and few more
i think the "button" are a simple touch screen extra area
look at the attached image of the touch screen replacement part.
i think that all the button area could be remapped as wished..
Using Magic mobile or AEbuttons you can remap key to simulate Dpad, i've put up and down to double tap volume,left to double hang up, right to double hang off, center to double backspace, done it with mobilemagic. Give it a try.
N'da said:
Using Magic mobile or AEbuttons you can remap key to simulate Dpad, i've put up and down to double tap volume,left to double hang up, right to double hang off, center to double backspace, done it with mobilemagic. Give it a try.
Click to expand...
Click to collapse
For me this is not good replacement, on real D-pad I can press and hold, for instance quick rewind/forward on player. You cannot do that with key remapping.
If it is possible to follow gestures, you can move left a hold to simulate D-pad left key hold.
I don't think the buttons are "capacitive" (as on iPhone), but the button area is touch sensitive as the rest of the display - see the image. So it in theory should be possible to use this area to capture stylus or finger touches. I don't think I am the first one with this idea. It seems to be that there are some obstacles.
Hey Guys,
is there any way to for instance chance the button with which you take pics on the HD, I have been taking pictures in the normal way but prefer to use the side buttons or another button on the bottom.
Help is greatly appreciated,
Thanks
Agreed ... is there any software that could do this. Heard software such as AE button could reconfig the buttons but cld these be done for the HD, would be really useful and less awkward then the touch screen in my opinion
sgt_sidz said:
Agreed ... is there any software that could do this. Heard software such as AE button could reconfig the buttons but cld these be done for the HD, would be really useful and less awkward then the touch screen in my opinion
Click to expand...
Click to collapse
Hmmm - I have AEButton Plus and I have not previously played with the camera and this button mapper.
I have the volume buttons mapped. BUT, in the camera application it seems that AEB+ is no longer able to trap the volume buttons. It looks like HTC have switched off the volume buttons in the camera application.
When I exit from the camera then the AEB+ mapping works fine.
so it is not possible to reassign other buttons to this purpose? too bad, thanks for the help and please let me know if you find anything!
actually it is possible to reassign volume up to Enter (with aebplus/aebutton plus) and use it in the touch hd camera app. Well... at least it used to work for me for some weeks. Now I have exactly the same problem and don't know what could have changed.
Strange thing is: When I unmap volume up in aebplus, do a soft reset, remap the button (with some luck) I can take exactly one picture - afterwards it is simply ignored.
really strange behaviour but it shows that there IS a way to keep the camera app from grabbing keys...
I did it Application released soon!
http://www.scilor.com/leocameraanykey.html
we know HTC Touch Pro2 has an on screen shutter button, do you find it difficult when you try to take photo of yourself?because you cant see the small on screen shutter button.
Do anyone know a tweak/altenative solution for this tiny shutter button?
make it bigger,or better yet,simply make it this way: the whole screen is the shutter button, you can take pictures by clicking anywhere of the screen.
I searched several hours without a thing,it seems that I am the first person who wants this.
Solution
The on screen button pissed me off too. Most particularly because I also turned off the shutter sound, so I would be holding the part of the screen thinking it took the picture...to turn the phone around and discover it only focused the image.
Install the keyboard controller for the rhodium, choose to add a key, press the PTT key "if you already have it mapped to something, don't worry. I also have apps mapped to the same button". When in the map config, click the [+] next to Rule. pull out the stylus, click the windows button, go to your camera, and stick the stylus back in. Below "Rule name" the window should say "IACSP20_Main" without the quotes. Choose "Direct key mapping", then select key "13 Enter" for the key. Finally send the key to the operating system.
What this does is: while you're in the camera window and push the PTT key, that key is pushing the enter key. It acts the same as the onscreen shutter button, as in, you have to hold the button. BUT, its a lot easier to find and easier to hold the phone when pushing the button. Good luck with your mapping.
zyphuris55 said:
The on screen button pissed me off too. Most particularly because I also turned off the shutter sound, so I would be holding the part of the screen thinking it took the picture...to turn the phone around and discover it only focused the image.
Install the keyboard controller for the rhodium, choose to add a key, press the PTT key "if you already have it mapped to something, don't worry. I also have apps mapped to the same button". When in the map config, click the [+] next to Rule. pull out the stylus, click the windows button, go to your camera, and stick the stylus back in. Below "Rule name" the window should say "IACSP20_Main" without the quotes. Choose "Direct key mapping", then select key "13 Enter" for the key. Finally send the key to the operating system.
What this does is: while you're in the camera window and push the PTT key, that key is pushing the enter key. It acts the same as the onscreen shutter button, as in, you have to hold the button. BUT, its a lot easier to find and easier to hold the phone when pushing the button. Good luck with your mapping.
Click to expand...
Click to collapse
Hey,thanks for your reply,so detailed,I am touched.
I tried your method,it works!
New Leo Energy Rom - this method is no longer working - camera just touch focuses - but does not "capture" - picture - any more advice?
same problem here
livealoha50 said:
New Leo Energy Rom - this method is no longer working - camera just touch focuses - but does not "capture" - picture - any more advice?
Click to expand...
Click to collapse
i had it mapped to the ptt the same way on nrg cht 4/16. i didnt even have to hold the button in fact, i just pressed it and it would take a picture. now the ptt button wont take a picture at all for me.
just go to the settings and click on advanced and see if touch focus is actually on, because if its turned off then it would just focus but not take a picture.
and that solution of yours to map it to the PTT button doesnt work for everyone (like me) because some of us dont got that button, but reguardless if it works for you then thats good too
Google Rhodium keyboard controller or look for it here at xda and even in this forum. BEST software. You can map ANY button to ANY key while still maintaining the keys natural function like pressing home goes to home, and holding hole for 2 seconds opens camera, and holding vol up or down can be enter which, in camera mode, takes a picture .
lilchicano said:
just go to the settings and click on advanced and see if touch focus is actually on, because if its turned off then it would just focus but not take a picture.
and that solution of yours to map it to the PTT button doesnt work for everyone (like me) because some of us dont got that button, but reguardless if it works for you then thats good too
Click to expand...
Click to collapse
the touch focus has no effect for me. regardless whether its on or off, my ptt button wont take a pic. im gonna mess around with the rhod kb controller a bit, maybe i did something wrong there. if not, im gonna have to mess about in the registry and see what can be done there.
Edit: I fixed it. It wasnt something I did wrong w/ rhod kb controller. Went into hklm/software/htc/camera and its subfolders and changed 5 or 6 things in there, some to fix the prob and some were just changed to suit my preferences. I gotta go to work shortly, but at about 2:30 this morning I'll be able to write down all the registry changes I made and post them in this thread. Now when I press the ptt within camera, it autofocuses and then takes the pic without having to hold the button, which is nice I have CleanRam mapped to ptt long press.
well i had it working perfect yesterday when i posted, but then i booted into android for a few hours while at work, and when i went back to windows, the camera went back to doing the stupid focus and then no picture crap again. so today i went back thru everything i had messed with and tried every combination of settings i could think of, and couldnt get it to work right again.
Do you use the Rhodium Keyboard Controller to remap your hardware buttons? If so, I can give you how I setup my buttons to take pictures and such?
Yeah thats what I used with the 4/16 cht nrg rom, when mapped to open program windows/start menu/multimedia/camera.ink by single press, it would open the camera and if I pressed it again, it would take a photo. I am still using the rhodium keyboard controller, tried setting double tap to 13 and that didnt take a pic, tried pointing it at windows/camera.exe and that didnt work, thats when i went into the registry. between the keyboard controller and registry editng, i had it opening the camera and taking photos both with single press of the ptt button. i then booted android later that day cause its easier for texting while im at work. later back to windows, and the ptt would open camera but not shoot. i dont understand how changes to the registry could work to make it work like that but not survive a reset? i went back iand messed around in the registry tryin different combinations of stuff, and couldnt get the ptt to snap a shot again. possibly theres something different in camera.exe from rom to rom?
Just make one of your hardware buttons the enter button. Enter focuses and takes the picture. I make my volume keys both the enter button. Also good when using them in total commander too .
i had made my ptt = enter upon double tap and it wouldnt work, neither would the hw qwerty button. i know what ur talking about, i have always set my ptt to take pictures, even on my original tilt, usually open program - camera.ink will open camera and also take pic, but for me neither enter nor open program will work for me. its gotta be either a reg entry that i just didnt get right, or the actual camera.exe is different from build to build, which i find believable because i remember switching albums on my original tilt and to do it i would also hv to switch camera.exe's also. which reminds me, is it me or does the tp2's photo album absolutely suck? on my tilt, i could zoom down way closer, and the album was gesture driven. draw a circle w/ur finger one way would zoom in, other way zoom out, etc. love the phone, hate the picture album
Ah weird... enter should work :/...
Yeah... what happened to the gesture thing? Guess they want to "try" and make the pointless zoombar serve some sort of function even though I never use it.
I use S2V and map the dble tap send key as up, and dble tap end key as down. I've always like S2V but just wish A_C would update it.
livealoha50 said:
New Leo Energy Rom - this method is no longer working - camera just touch focuses - but does not "capture" - picture - any more advice?
Click to expand...
Click to collapse
I used to do this when the pro 2 first came out and this always worked but for the last 4 months this has stoped working and it sucks cause i loved having this option. I have tried asking for help from NRG's irc chat room and they banned me for asking lol, i even tried asking in his thread several times and ppl tell me it works fine for them, but it just dont work for me. it always worked before but i flashed to a new NRG rom update and it just stopped working, cant remember when it worked last, but i do miss it!!! This option works fine on ALL other roms but NRG's
lilchicano said:
just go to the settings and click on advanced and see if touch focus is actually on, because if its turned off then it would just focus but not take a picture.
and that solution of yours to map it to the PTT button doesnt work for everyone (like me) because some of us dont got that button, but reguardless if it works for you then thats good too
Click to expand...
Click to collapse
I used to be able to pick any hardware button to make this work, i use the vol up key myself!!
Thanks zyphuris55!
enter key doesn't work for me either.
A plausible reason for the "Enter" workaround working for some people could be the use of different camera drivers.
With the HD2, the early camera drivers allowed a photo light (using the LEDs) to be used when taking a picture in the dark. However, the recent camera drivers no longer allow photo lights, and the user is dependent on a simple flash upon taking a photo.
I know that NRG and other chefs use different camera drivers (they sometimes post it in their changelogs), so this could be why some are able to use "Enter" to take photos while others can't.
If it is indeed driver-related, you can't do anything about it, as these drivers are cooked into the ROMs (cabs and reg tweaks have no effects).
P.S. At least the TP2 has a lot of buttons that can be remapped! The HD2 can only have the Send (Hold) function be remapped!
After about month of using my dinc, I've found that I literally never press the opti trackpad button. Is there any way to make this button act as a dedicated camera button (or to set it up to launch a specific app). I've done no customization to my phone thus far (waiting on a stable froyo custom ROM), but I have no problem with rooting or installing a custom ROM in order to get this functionality. Does anyone know if this is possible? I'd love to reclaim this currently useless button.
Download Vignette from the market and you can set your trackpad to take pics or you can even tap the screen to take a photo.
I think morph2k4 is talking about having the button work even when you're not in a camera app. So the idea would be, any time you press that button, it would either take a picture or open a camera app. With Vignette, that button only works when you already have the app open.
Exactly right, I want to make that button load up my camera app from anywhere.
You should take this to the development forum, they might be able to help.