Related
Dear all 818pro(ENG OS)
The reason causing memory card disappear problem is dopod built-in software.(inside Extension Rom)
Only one method to solve, hard reset the PDA but without installed any built-in software as follow:
Right now I hard-reset the PDA, until the password setup, and then the PDA begin install build-in software...soft reset immediately.
If you used above hard-reset method which don't installed any built-in software. You only lost:
1. Smart Dailer
2. Built-in Voice Commander
3. Autoconfig
4. clearvue pdf
I used two days and everything work fine. You may ask why I so sure? Because I noticed the speed of reading memory card is different before which listed below:
1. Before using above mentioned method: When the PDA turn on (In sleeping mode and phone on mode), it need 1-3 seconds to read the memory card. If you installed Today Plug-in Software, you may found that it need 1-3 seconds to detect the memory card.
2. After using above mentioned method: When the PDA turn on, the PDA detect the memory card simultaneously.
As a result, I can assure this method can solved the memory card disappear problem.
Some experience would like to share with all user:
1. I installed all programs in the ROM. If someone installed programs in the memory card, please let me know the result.
2. I can installed back the smart dialer software. Please search this forum to download.
3. When you connected GPRS, a 'Disconnect' button (and Timer) to the Connection List for GPRS is disappeared. You can make registry hack to switch back.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
4. PDA can detect 'Phone Service Provider' automatically. However, when you need GPRS, you need manuel setup. I used 'PEOPLES' which is Hong Kong Service Provider and take as a Example setup:
Go to Setting > Connections > Tap Connections
1. Choose > My ISP - Add a new modem connection
2. You need to enter > a Name (Which name you like) and Select a modem [Cellular Line (GPRS)] > Next
3. Acess point name : Peoples.net > Next
4. Ignore the user name and password. > Finish
Thanks for the Reg Hack!!! Worked perfectly on the Dopod 818Pro!!!!
Thanks!!!
voyager
sas90850 said:
2. I can installed back the smart dialer software. Please search this forum to download.
Click to expand...
Click to collapse
Hi sas90850,
What a good job you've done! Excellent!
I'm wondering whether this topic is the instruction you said (WM5 smart dial)
or you could point out where I can download the smart dialer software and have an installation instruction, thanks.
I've 818Pro and would like to do the same "UPGRADE"... :wink:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
sas90850 said:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
Click to expand...
Click to collapse
Just to let everyone know that you already have this same file as well as the GPRS disconnect button CAB file in your own Dopod 818Pro's Extended_rom. You can browse and copy files in this hiden folder with GSfinder.
This worked for me also with the jamin. I soft reset after hard resetting and it gave me back rom and fixed the sd issue. Thanks
Edit: After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
Hi, this method seems to have solved most of my Jamin troubles too! Thanks!
I need just some help to get the GPRS timer: I don't find the registry. Is it in the HKEY_CURRENT USER OR THE HKEY_LOCAL_MACHINE? I found the Control Panel\Phone, but not the "Flags 2" registry that needs changing as described.
Many thanks!
Dear Fidipaldi
You need to add a new registry. Make sure you use DWORD Value. The location is shown below.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
1. To add a Disconnect button only:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 8
2. To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 16
3. To disable both the Disconnect button and the timer:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 0
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Dear SAS,
Many thanks for your help!!
It works great! I also managed to get the smart dialer back. The only application that is missing is Clearview.
So far my Jamin does not seem to crash on a regular basis as it did before. It must be the add on software that made the device crash.
Finally I can enjoy the device. Thanks again!
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
sas90850 said:
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Click to expand...
Click to collapse
Here's what I usually do on a new device or after a hard reset. I have about 10 progs on my sd card (total commander, tweaks2k2, etc...) and I have created shortcuts to them and placed them in a folder on my sd card. I then copy those and paste them in the /windows/start menu/programs folder and everything works well. I've noticed this quirky behavior on the jamin so far?
I did what you recommended by not installing the ext rom. I'm happy with a quicker device and more rom; however, I'm still having this little issue with the icons not appearing correctly in the start menu? Kind of strange. The white and blue default box is what's showing up (as if there is no shortcut icon) but the progs open just fine? :shock:
which program should we install
After Hard Reset and Review the extended rom,
There are serveral progarms avaliable for install
I just wonder what program from Extended Rom should we normally install in order to make phone become functional as the standard automatic install of extended rom?
Secondly, what each one of them is for? does anybody has information?
Thank you very much
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Khuanchai said:
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Click to expand...
Click to collapse
After 6 days used, I don't have any soft reset problem at all no matter in standby mode, sleeping mode and/or battery charging either the PDA is turn on/off......any condition.:roll:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
mtarro said:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
Click to expand...
Click to collapse
Thanks Yes it worked temporarily and then after a soft reset...same. I've narrowed it down a bit. The progs show fine in the bottom of the start menu (recently run progs) but if I add them to the top part of the start menu, they show fine until a soft reset....then they don't again. What I also noticed is if I copy the .exe and paste it in the start menu it shows fine....the only problem was when I copied the .exe and pasted a shortcut to the .exe. Anyway, I've settled on a fix. A few of the progs that didn't display correctly, I've just added to ilauncher.
Don't spend any more brain power on it for now....it must be something specific to me as others aren't posting problems like this. Thanks again
@mikewchandler
First of all it's nice to see you again on this forum!
To fix your problem try installing Signed_IconsDll.sa.cab from the extended rom. This should fix your problem!
@ALL
Regarding the SD card issue, the problem seems to be originating from the file Signed_SD_Driver.sa.cab. Not installing just this cab will also solve the problem.
I would suggest installing the following cabs as well as these improve system stability or add functionality:
CAB-ConnectionSpeedMax.sa
CAB-Shortcut-MMS1-JAVA5XX-CV-Dopod........
CAB-WapPushSMS
Signed_Disable_ErrorReport.sa
Signed_DisconnectButton_3s.sa
Signed_IconsDLL.sa
Signed_PIE_View_Default.sa
Signed_Prophet_DopodAsia_UA.sa
Signed_Version.sa
SmartDialing_enable_0915_signed
Thanks kta....it's great being here but I'm going to miss the eten community. :?
Thanks for the tips. Yeah, I didn't install the ext rom at all....I should have mentioned that (if I didn't?). Thanks again.
Edit: Where's the best place to get the files off the ext rom? I don't guess I know how to extract the ext rom to copy before hard resetting, soft resetting to keep it from installing. Hope that runon sentence makes sense.? :roll:
When Every Soft Reset the ATOM Run's
Auto Cofigurator
How to Disable it Please Help me 8)
В HKCU/AutoConfig/Network, create string XPath with value operator № , (you can see it after runing autoconfig)
How do I find the Operator Number?
kropotov said:
В HKCU/AutoConfig/Network, create string XPath with value operator № , (you can see it after runing autoconfig)
Click to expand...
Click to collapse
Hi,
How do I find the Operator number? I am using Cingular Service.
thanks
tee
1. Run Autoconfigurator
or
2. find key DetectNet or NetworkID in HKCU/AutoConfig/Network
What you mean by create string XPath ... and how to do it.
first of all, install regedit, or resco explorer with regedit plugin.
2. go to HKCU/AutoConfig/Network,
3. create string with name "XPath" and with value operator №
kropotov,
Forgive me as I am pretty new at reg edits. If my operator number is 302720 can you please tell me exactly what I need to type into the spaces.
When I select new string I get value name with New Value %1 already in the box below it and also Value data with nothing in the box below it.
Value name:
New Value #1
Value data:
I would greatly appreciate your help.
Thanks
imapfsr
no problem bro!
I use resco exploer registry add-in.
In my case, operator# 25099
Lets begin!
1. HKCU/AutoConfig/Network
menu=>new=>string value
name-> XPath
String ->25099
done
!!!! turn off Atom for 30 seconds, to save changes!!!!!!
menu->exit.
thats all. soft reset.
kropotov,
tried it but it still asks for configure, must have missed something. Thanks anyways dude.
Todd
Wow, thanks man, that autoconfig was driving me really crazy(esspecialy the anoyng noice - "ding")
Thanks againg - it works for me
Oh, it work for me too. Thanks. It took me 4 months to find out the simple way to sovle it !!!
Im sure there is a very simple way to fix these issues im having, but I havent found the application to do so yet, so im in need of some help.
I just performed a hard-reset on my t-mobile mda to the new rom update. Since then my contact list is showing my sim contacts, and the contacts in the actual phone (which is a copy of the sim contacts); and i'd like for the list to show only the phones contacts. Also any theme I download doesnt seem to work. i usually get them from littlethemes.com and they are .tsk files. I had a few working before the update. I had a similar program to tweaks2k2; basically a compilation of different registry tweaks, except it was a free version. if anyone can help me to find the app. and/or fixing any of these issue's i would def. appreciate it.
Thank you in advance
In order to hide the sim contacts get yourself a decent file explorer such as total commander (http://www.ghisler.com/ce.htm) and make the following changes. . . .
\\ > Registry > HKCU > ControlPanel > Phone
Add the following value to it:
Key: ShowSim (dWord)
Value: 0 (decimal)
I am not sure what the problem is with your today themes. Try placing the themes in the root directory of your storage card or windows\my documents. Browse to start>settings>personal>today and see if your files are populating the list under 'appearance'
For further tweaks check the following thread - it may prove useful: http://forum.xda-developers.com/showthread.php?t=259113&highlight=hide+sim+contacts
And: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Hi all,
My other half bought a Touch Plus yesterday and I've been adding software to it to make all that much better.
The contacts are stored on the SIM and I've copied them all into Pocket Outlook. I then made the reg tweak to hide the SIM contacts which worked immediately, hiding all the SIM contacts. However, when I soft reset the device (via software or holding down the power button and then re-powering on) the registry value goes back to what it was - showing the SIM contacts!
Is there any way that reg value can be kept to 0?
Cheers
ND
Hi
I have the exact same problem and asked this question previously here, never got a answer
http://forum.xda-developers.com/showthread.php?t=359152
The first thing after a reboot is to hide my SIM contacts... If anyone have a solution it would be very nice.
Kind Regards
I have found a solution...
Download dotfred's excellent TaskManager/Registry Editor from: http://www.dotfred.net/TaskMgr.htm
Copy the exe to wherever you want on your device,
Use the registry editor in there to set the ShowSIM value to 0.
Export that registry value... to \My Documents\HideSIMContacts.reg (for example)
Create a shortcut to the task manager exe in Windows\StartUp.
Edit the properties of that shortcut (I use Resco Explorer) and set the Target as follows:
"<path to task manager>" \My Documents\HideSIMContacts.reg /silent
Make sure you have "'s around the Task Manager path BUT NOT around the path for the reg file.
Reboot...
Bob's your uncle.
I had the same issue with my previous Orange UK stock ROM, don’t know why the registry tweak does NOT stick after SR on certain ROM’s :-/ so in the end I resorted to installing the attached cab which fixed the issue
On my current HTCAsia WEE ROM the registry tweak works so no need for the cab fix! Anyway for those with ROM where the registry tweak does NOT work, you can use the fix mentioned here by NinjaDonkey or install the attached cab and soft reset, that should do the trick
AWESOME...thanks, I have a locked rogers HTC Touch and have tried many different Reg tweaks that would not stick to hide the SIMs in my Contacts, but the NIKI Sim fix above finally got it. Thanks, thank you, thanx again.
nikisimfix
hello !!
Thank you very much for this soft
Thanks guys for the wonderful solution.. I was going bonkers having to delete and add in all my contacts everytime I factory set my Niki. Cheers..
Other solution is RilhasHideSIM, for more see: http://forum.xda-developers.com/showthread.php?t=467147
thanks gfreek this thing worked fine...
Thanks for sharing
Well done and thanks a lot for sharing!
gfreek said:
I had the same issue with my previous Orange UK stock ROM, don’t know why the registry tweak does NOT stick after SR on certain ROM’s :-/ so in the end I resorted to installing the attached cab which fixed the issue
On my current HTCAsia WEE ROM the registry tweak works so no need for the cab fix! Anyway for those with ROM where the registry tweak does NOT work, you can use the fix mentioned here by NinjaDonkey or install the attached cab and soft reset, that should do the trick
Click to expand...
Click to collapse
I downloaded and installed this but it didn't work. What did I do wrong??
tks,works well
Question:
ok, so we only have about 30 shortcuts on our programs tab right? well i added more, so now i have up to 51 shortcuts on my programs tab. i click on the extra ones added and everything goes well until after selecting a primary program to add, it doesnt add.
this is what i did.. maybe i missed a step!
Open Regedit and i went to the following root
*HKLM\Software\HTC\Manila\ProgramLauncher.
i created new folders 31-51 and inside each folder i created the following strings and dword:
String Values Name: Command
String:
String Values Name: DispName
String:
String Values Name: IconPath
String:
String Values Name: Path
String:
DWORD Value Name: IsReadOnly
Data : 0
Then i went to the following root:
*HKLM\Software\HTC\Manila\ProgramLauncher\totalIte mCount.
and i changed the DWORD Data to 51.
i Restarted my phone and i stopped there.
Please advice cause this would be pretty badass if we can keep adding to our programs tab
If you search there is a cab that will set this up correctly, not sure where you've gone wrong, but the cab might fix it!
Gordon
i searched for said cab and couldnt find it... id love to be able to add more programs, esp ones that arent in the default program group.
As I've started to recover from the distress of the touch screen on my TP2 breaking and am in a slightly better mood! I thought I'd find the link http://forum.xda-developers.com/showthread.php?t=534596 is what you're looking for.
Gordon
I tried this cab and it doesn't fully work...
I see the 20 new spots in the program tab, but I can't add any programs on those new spots either. I select a program but it is not added
vakbrain said:
I tried this cab and it doesn't fully work...
I see the 20 new spots in the program tab, but I can't add any programs on those new spots either. I select a program but it is not added
Click to expand...
Click to collapse
thats the same problem that i have. everytime i select a program to the selected shortcut it goes back to the begining and it wont add it.
hey thanks for the support i appreciate it..
GordonTGopher said:
As I've started to recover from the distress of the touch screen on my TP2 breaking and am in a slightly better mood! I thought I'd find the link http://forum.xda-developers.com/showthread.php?t=534596 is what you're looking for.
Gordon
Click to expand...
Click to collapse
thanks for your time. ok so i took a look at the link and i havent tried the cab due to the fact that i spend a while manually adding the files in my registry but i did read there post and they did say you have to manually add the program through the registry.. so im going to try it and i will get back to you guys!
Example from the link:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\30]
"DispName"="Total commander"
"IconPath"=""
"IsReadOnly"=dword:00000000
"Path"="\program files\tcmd\totalcommander.LNK"
so what im going to do that way you guys can try it if you want is the items in green are the items we will need to add manually.
kano69 said:
thanks for your time. ok so i took a look at the link and i havent tried the cab due to the fact that i spend a while manually adding the files in my registry but i did read there post and they did say you have to manually add the program through the registry.. so im going to try it and i will get back to you guys!
Example from the link:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\30]
"DispName"="Total commander"
"IconPath"=""
"IsReadOnly"=dword:00000000
"Path"="\program files\tcmd\totalcommander.LNK"
so what im going to do that way you guys can try it if you want is the items in green are the items we will need to add manually.
Click to expand...
Click to collapse
Ok i Just tried it and it was successfull.. after you manually add the program on to the shortcut "Add" on your registry then due a quick restart and programs will show.
It sucks that you need to spend time on it doh..
I found the way to make the cab fully working... It missed a key to be modified.
Here's what I did :
1- Install the cab (http://forum.xda-developers.com/attachment.php?attachmentid=202860)
2- Modify this key using a registry editor (ex.: task manager) :
[HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher]
"totalItemCount" (hex value) = "50" (it was 20)
3- soft reset ... that's it
With this simple modification, the + button are now fully working !
vakbrain said:
I found the way to make the cab fully working... It missed a key to be modified.
Here's what I did :
1- Install the cab (http://forum.xda-developers.com/attachment.php?attachmentid=202860)
2- Modify this key using a registry editor (ex.: task manager) :
[HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher]
"totalItemCount" (hex value) = "50" (it was 20)
3- soft reset ... that's it
With this simple modification, the + button are now fully working !
Click to expand...
Click to collapse
i dont think is works for the t-mobile version. cause its doing the same thing to me. i havent tried it until now, everytime i click the + button and select a program for it. it takes me back to the top of the page and does not add.
not working for me too,i have 50 shcts on display but a cant add programs even after soft reset,sorry,can you maket work .thanks