Database Users

Reg key to modify 12hour / 24hour time for O2 mini

Hi,
Would anyone help provide me which reg key which allow me to set my O2 mini to 12-hour "time style" (in regional setting - time) ?
After I install monster chinese and set region to HKG.
It would only allow me to set "HH:mm:ss"
It doesn't have the "hh:mm:ss" (not capital H) which can display in 12 hour format.
Please help.

Anyone could help or suggestion ?
please advise.
Thank you all.

Would it be possible to make this change ?
Please advise.

Use Resco Explorer or other reg editor program to change the registry:
HKEY_LOCAL_MACHINE - nls - Overrides：
S1159 AM
S2359 PM
SLDte dddd, d MMMM yyyy
SSDte d/M/yyyy
STFmt h:mm:ss tt
The above formats are just examples. You can of course enter valid formats in Chinese as well.

Yes !
It's working.
Thank you very much.

how to access HKEY_LOCAL_MACHINE?

I am trying to access HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings. I have installed (regeditstg.exe) but am having diffilculties. Please could someone advise. I am trying to load the GPS onto the S200. I am trying to do the following;
1. Delete the DWORD marked Hide (if present)
2. Delete the DWORD marked Redirect (if present)
3. Add a DWORD called Group and give it a value of 2
4. Soft reset the device.
The GPS icon should then be available.
http://www.bbits.co.uk/blog/archive/2006/02/15/6953.aspx
Thanks in advance.
Will

You need a registry editor. Check FreewarePPC.com

I recommend the free PHM Registry editor.
Note, that before soft resetting you must put the device in standby for 5 secs than back on to insure the changes are saved.

Thank-you for your help. I have downloaded the regester edit. I have managed to access the HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings past as above. But cannot find the DWORDS and added the Group. I am having real difficulties adding the GPS to my S200 (Jamin), please feed this link to u/s more. I have tomtom and am not able to use it!!!!! How exasperating!
http://forum.xda-developers.com/showthread.php?p=1013803#359339
I have had my PDA b4 stolen, and now working off a new one. Couldn't get the last one working either!
Cheers,
Will

iPAQ hw6945 need reg entries - accidently deleted!

I have two problems and after searching for days I still can not find anything, so I was hoping that I could get someone that has an iPAQ hw6945 to please go to the following registry keys and tell me what entries are in your registry. Thanking you in advance for your help.
1. Can no longer see battery status (current or hidden) because I accidently erased something, & have pin pointed it out to these two entries.
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BatteryIF
"Index"=dword:
"Order"=dword:
2. Just curious if anyone else has entries or just blank like mine.
HKEY_LOCAL_MACHINE\SOFTWARE\Global Locate\Gpsct\3rdPartyCleaner
HKEY_LOCAL_MACHINE\SOFTWARE\Global Locate\Gpsct\BackDoor

Here is what I have on my 6955:
BatteryIF
Dll = Battery.Dll (string)
Index = 2 (dword)
Order = 0 (dword)
Prefix = BAT (string)
The Global locate entries you have listed are also empty on my 6955.
Hope that helps you out.

Thanks mdelleman for your response. I will try these, keep your fingers crossed. I appreciate your help!

Hi dudes!...someone have the values of HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH\CalibrationData for HW6945?
Sorry for my english

khigashi said:
Hi dudes!...someone have the values of HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH\CalibrationData for HW6945?
Sorry for my english
Click to expand...
Click to collapse
Hi,
You can't just add these values. You'll need to run the calibration in your Settings | Screen
Dirk

Tks Dirk for reply, but i can not get passed the calibration screen on my iPaq, i don't know why, so i skipped this process by deleting welcome.exe...and i think that with this values, i can fix those alignment problems.

Wrong Operator Name

Hi,
I am using a mini & it shows wrong spelling of the operator name i.e. GrameemPhone instead of GrameenPhone.
Would anyone be kind enough to give me a solution? I know there are lots of gurus out there ...
Cheers...

I am using a HTC Touch Viva (Opal), same problem. "GrameemPhone" instead of "GrameenPhone".
Very annoying

you can try xiaojin's font changer..it has an option to change operator name to whatever name you prefer..

Wrong Operator Name bug fixed:GrameemPhone instead of Grameenphone
1. Install any registry editor. Here is a free to download: http://www.phm.lu/products/pocketpc/regedit/
2. Run the registry editor and Go to HKEY_LOCAL_MACHINE/Software/Microsoft/RIL/OperatorNames
3. Select the OperatorNames from the tree list and add a New String Value from Edit menu of that registry editor. Give the value name is "47001" and Value data is "Grameenphone".
4. Save and reboot the device.
Warm Wishes,
Bappi
Networks/Grameenphone.

Hi, i have been a long time user of WM. However recently i switched to HTC Hero (Android) which has the same problem - misspelled operator name. Any advise? Sorry, probably this is not the right forum to ask this. Rgds.

My goodness. I am revisiting same thread with another HTC after a year.
This time HTC Desire, same problem. GrameemPhone instead of GrameenPhone.
Anyway to fix it?

Haven't got solution for android.
WinMo: HKLM/System/state/phone/CurrentOperatorName

Reeedim said:
Haven't got solution for android.
WinMo: HKLM/System/state/phone/CurrentOperatorName
Click to expand...
Click to collapse
Thanks.
I don't have the WinMo anymore.
Planning to get a WP7 soon though
Meanwhile, if anyone knows how to fix the problem on Android, that would be great.

bappinath said:
1. Install any registry editor. Here is a free to download: http://www.phm.lu/products/pocketpc/regedit/
2. Run the registry editor and Go to HKEY_LOCAL_MACHINE/Software/Microsoft/RIL/OperatorNames
3. Select the OperatorNames from the tree list and add a New String Value from Edit menu of that registry editor. Give the value name is "47001" and Value data is "Grameenphone".
4. Save and reboot the device.
Warm Wishes,
Bappi
Networks/Grameenphone.
Click to expand...
Click to collapse
why should tamper with the Registry editor bappinath, bappinath ..! it only helps temporarily ... if at any time you change the operator if you akn replace the operator name again ...? can become tired
should just use this ===> it will fit with existing state and operator

Adding More Shortcuts to "TF3D-Programs-Tag"

Question:
ok, so we only have about 30 shortcuts on our programs tab right? well i added more, so now i have up to 51 shortcuts on my programs tab. i click on the extra ones added and everything goes well until after selecting a primary program to add, it doesnt add.
this is what i did.. maybe i missed a step!
Open Regedit and i went to the following root
*HKLM\Software\HTC\Manila\ProgramLauncher.
i created new folders 31-51 and inside each folder i created the following strings and dword:
String Values Name: Command
String:
String Values Name: DispName
String:
String Values Name: IconPath
String:
String Values Name: Path
String:
DWORD Value Name: IsReadOnly
Data : 0
Then i went to the following root:
*HKLM\Software\HTC\Manila\ProgramLauncher\totalIte mCount.
and i changed the DWORD Data to 51.
i Restarted my phone and i stopped there.
Please advice cause this would be pretty badass if we can keep adding to our programs tab

If you search there is a cab that will set this up correctly, not sure where you've gone wrong, but the cab might fix it!
Gordon

i searched for said cab and couldnt find it... id love to be able to add more programs, esp ones that arent in the default program group.

As I've started to recover from the distress of the touch screen on my TP2 breaking and am in a slightly better mood! I thought I'd find the link http://forum.xda-developers.com/showthread.php?t=534596 is what you're looking for.
Gordon

I tried this cab and it doesn't fully work...
I see the 20 new spots in the program tab, but I can't add any programs on those new spots either. I select a program but it is not added

vakbrain said:
I tried this cab and it doesn't fully work...
I see the 20 new spots in the program tab, but I can't add any programs on those new spots either. I select a program but it is not added
Click to expand...
Click to collapse
thats the same problem that i have. everytime i select a program to the selected shortcut it goes back to the begining and it wont add it.
hey thanks for the support i appreciate it..

GordonTGopher said:
As I've started to recover from the distress of the touch screen on my TP2 breaking and am in a slightly better mood! I thought I'd find the link http://forum.xda-developers.com/showthread.php?t=534596 is what you're looking for.
Gordon
Click to expand...
Click to collapse
thanks for your time. ok so i took a look at the link and i havent tried the cab due to the fact that i spend a while manually adding the files in my registry but i did read there post and they did say you have to manually add the program through the registry.. so im going to try it and i will get back to you guys!
Example from the link:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\30]
"DispName"="Total commander"
"IconPath"=""
"IsReadOnly"=dword:00000000
"Path"="\program files\tcmd\totalcommander.LNK"
so what im going to do that way you guys can try it if you want is the items in green are the items we will need to add manually.

kano69 said:
thanks for your time. ok so i took a look at the link and i havent tried the cab due to the fact that i spend a while manually adding the files in my registry but i did read there post and they did say you have to manually add the program through the registry.. so im going to try it and i will get back to you guys!
Example from the link:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\30]
"DispName"="Total commander"
"IconPath"=""
"IsReadOnly"=dword:00000000
"Path"="\program files\tcmd\totalcommander.LNK"
so what im going to do that way you guys can try it if you want is the items in green are the items we will need to add manually.
Click to expand...
Click to collapse
Ok i Just tried it and it was successfull.. after you manually add the program on to the shortcut "Add" on your registry then due a quick restart and programs will show.
It sucks that you need to spend time on it doh..

I found the way to make the cab fully working... It missed a key to be modified.
Here's what I did :
1- Install the cab (http://forum.xda-developers.com/attachment.php?attachmentid=202860)
2- Modify this key using a registry editor (ex.: task manager) :
[HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher]
"totalItemCount" (hex value) = "50" (it was 20)
3- soft reset ... that's it
With this simple modification, the + button are now fully working !

vakbrain said:
I found the way to make the cab fully working... It missed a key to be modified.
Here's what I did :
1- Install the cab (http://forum.xda-developers.com/attachment.php?attachmentid=202860)
2- Modify this key using a registry editor (ex.: task manager) :
[HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher]
"totalItemCount" (hex value) = "50" (it was 20)
3- soft reset ... that's it
With this simple modification, the + button are now fully working !
Click to expand...
Click to collapse
i dont think is works for the t-mobile version. cause its doing the same thing to me. i havent tried it until now, everytime i click the + button and select a program for it. it takes me back to the top of the page and does not add.

not working for me too,i have 50 shcts on display but a cant add programs even after soft reset,sorry,can you maket work .thanks