Related
Fixing German QWERTZ keyboard layout for O2 miniS with English ROM installed is very simple.
Many nomally use AEKmap, but this is not allways fine for somebody.
Now we need a small registry hack.
1. Use a registry editor like total commander.
2. Go to \HKCU(HK Current User)\ControlPanel\Keybd\Locale.
3. Change the value of the key "Locale" from "0809" to "0407". "0407" is the locale ID for Standard German. You can find other Locale ID suitable for you at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx.
4. Do a soft reset and enjoy. All the keys and symbols have fixed right.
Hope this help someone.[/list]
wooooooow!!
That's good.
I will try that NOW
Well I don't see any Locale folder under Keybd...
What next?
cizake said:
Well I don't see any Locale folder under Keybd...
What next?
Click to expand...
Click to collapse
Dear cizake,
"Locale" is not a folder. This is a key, locating under the folder "Keybd". We have to change the value of this key. Check the path again, pls.
Hope this help.
I cannot change the vaule, I use PHM Registry editor, after soft reset, the vaule back to 0804,not 0407.....why??
sim1 said:
I cannot change the vaule, I use PHM Registry editor, after soft reset, the vaule back to 0804,not 0407.....why??
Click to expand...
Click to collapse
I have no idea. I am using total commander. This is free at here http://www.ghisler.com/pocketpc.htm.
1. Check your programs that running each time you start windows at \windows\startup\. If they change keyboard settings.
2. After changing the registry key value. Do the soft reset by this way: Hold down the power button for ~5 seconds. When being asked to turn off the device, tap Yes. This will completly turn off the device and save the changes in registry. This method may different from taping the stylus to the reset hole.
I dont see Locale either .... would really appreciate any help on changing :
a) software keyboard layout and
b) hardware keyboard layout
pencilcase said:
I dont see Locale either .... would really appreciate any help on changing :
a) software keyboard layout and
b) hardware keyboard layout
Click to expand...
Click to collapse
Check the path again:
The folder: \\\Registry\\HKCU\ControlPanel\Keybd\
The key: Locale.
If you do not see the folder. Create a new folder "Keybd", then create a new key with name "Locale".
I thing this may help.
This is a fix for hardware (real) keyboard only.
Cool. For AZERTY keyboards the value is 040C. My ROM version didn't have Locale value in the HKC\ControlPanel\Keybd, I had to create one myself. It has to be String value, not DWORD. Thank you for great hack.
GUYS! YOUR ARE GREAT!!!
Works perfect with Eng for Russian Keyboard (Russian code is 0419). Now I can switch between Russian and English
yes can confirm 0809 works a treat for english keyboard, thanks!!
Sweet!
Yup! works a treat. Have now changed WM 5 from french to English (which gave me the english keyboard problem) and thanks to you changed the keyboard layout to French. Brilliant. By the way, where could i get the new qtek 9100 ROM 1.6 WWE?
Sorry, but this nice solution is not working after upgrading to 1.6.7.1
This entry in the Registry does not exit anymore. I can only find things whichhave the value "e0010409" for english keyboard and i want to get back my german one. Has anybody that number?
Check again kbaasch
Check the path again:
The folder: \\\Registry\\HKCU\ControlPanel\Keybd\
The key: Locale.
If you do not see the folder. Create a new folder "Keybd", then create a new key with name "Locale".
I thing this may help.
This is a fix for hardware (real) keyboard only.
my keyboard is now ok
oainot
Its works fine, thanks.
I have T-Mobile MDA Vario from German, I have flashed it with ROM: 1.6.7.1 WWE
And, with reg file my keyboard is now ok.
Code:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
MrBuz
Great, stunning solution! Thank you! This is absolutely BRILLIANT !
I have 1.6.7.1 WWE and Russian layout works perfectly...
But the English now lacks a "comma", as the combination "dot+comma" is assigned by the system to switch between layouts.
Is there any solution to re-assign the layout sequence, or to assign "Shift+comma" to print comma (currently Shift does not have any influence on that button on my system...)
Awesome solution.Works like a charm. Can not imaging a better solution. A++++
Fixed permanently?
Cool!
Will this work after hard reset? If not, anyone dare to create a new ROM so that we can flash it and fix it permanently?
Rocks!
hello
I have qwertz keyboard and italian rom
which value i must insert?
tnks a lot
i can try to insert locale key, but when i do soft reset locale it became a directory...
why? i don't understand
the page where i sow the references is because the other doesn't work
http://www.microsoft.com/globaldev/reference/win2k/setup/lcid.mspx
Universal is very nice device, but only focused to Major Language and some languages were un supported their encoding on Inbox and IE.
so i made wince.nls with more national language encoding support last year,
I forgot to tell you all and i will do now
the Regional supports are
@WWE version Default Supported Languages,plus
(some of follows already in WWE version, sorry i forgot what was in Default OS)
@Japanese / Korean
@Chinese(Traditional/Simples)
@RUssian(supported by default?)
@Romania @Croatian
@Makedinia @Czech
@Arabic @Dutch
@Azeri(Cyrille) @Estonia
@Azeri(Latin) @Faeroes
@Basque @Finnish
@Belarusian @Fyro
@Bulgarian @Greek
@Catalan @Hebrew
@Hungarian @Iceland
@Latvian @Polish
@Prtuguese @Rommania
@Serbian(Cyrille/Latin)
@Slovak @Solovenia
@Swahilli @Tatatr
@Turkish @Ukraina
@Thai @Urudu(pakisitan)
@Uzbek(Cyllile/Latain)
@add Encoding on IE and Inbox
All of aboves and also
@vietanmese
@Central Europe
@Eastern Europe
@Arabic
@Hindi
@Baltic
@Turkish
@Thai
@Korean / Jpana
@ChineseHebrew
@Cyrillic
@and more.......
But i dont have all fonts for them. you must install your fonts
onto windows folder or \windows\Fonts folder.
ANd another way,
you can create and install on the \Storage Card\Fonts folder with
small application FontsOnSTorage by mr.homing
http://www.yetanotherhomepage.com/j7xx/software/util/fontonstorage.html
i htinks those fonts can be work on your devoce, but not tested by myself all of them
http://www.alanwood.net/unicode/fonts.html
Any way, this is the Strikes Back by Forgotten Nations by WM5 WWE.
PLS enjyoy it friends!
Allahhhhhhhhhh h akbarrrrrr!
Thank you Asukal!
Thanks once more...
Cooked ROM with this patch
**QTEK 130 ROM based****2006-Aplir-23 uploaded*****
Fogotten Nations ROM ---following reginal "wince.nls" and "font"
http://www.asukal.jp/ROMs/Qtek_Forgotten_130.rar (53MB)
hindi, hebrew,Arabic,Thai, Chinese,Korean, Japan, Easteren and Central Europe,
Greek,Vietnamese fonts and encodeing in this ROM,,,,,,already
But i can not confirm they are correct or not,,,,,,
Allahhhhhhhhhhhhhhhhhhhhh h akbarrrrrrrrrrrrrrrrrrrrrrrrrrr again!!!!!!!!!!
Nam Amida-butsu!
shamilsh said:
Allahhhhhhhhhhhhhhhhhhhhh h akbarrrrrrrrrrrrrrrrrrrrrrrrrrr again!!!!!!!!!!
Nam Amida-butsu!
Click to expand...
Click to collapse
thanks Camrade Shamil......
but seems only you need this... ?
Asukal said:
shamilsh said:
Allahhhhhhhhhhhhhhhhhhhhh h akbarrrrrrrrrrrrrrrrrrrrrrrrrrr again!!!!!!!!!!
Nam Amida-butsu!
Click to expand...
Click to collapse
thanks Camrade Shamil......
but seems only you need this... ?
Click to expand...
Click to collapse
Not at all, nice and god job , Asukal
I install to my BA it working very well
Text messages?
It seems like I can't get this to work with text messages (the encoding option in my text message inbox is disabled). Does anyone know how I can get around this problem?
whats language you want to get?
using this rom or CAB files with English ROM?
Is your font in your Device or ROM?
i tried text message in Japanese, Chinese, Korean. Thai Languages in this ROM
How about with check the unicode option?.
Also encoding of IE and e-mail enabled?
SMS doesnt need some encoding if the SMS service center support that.
<but almost of them suport it, within my knowledge>
Asukal said:
whats language you want to get?
using this rom or CAB files with English ROM?
Is your font in your Device or ROM?
i tried text message in Japanese, Chinese, Korean. Thai Languages in this ROM
How about with check the unicode option?.
Also encoding of IE and e-mail enabled?
SMS doesnt need some encoding if the SMS service center support that.
<but almost of them suport it, within my knowledge>
Click to expand...
Click to collapse
I want to get Traditional Chinese on my Vodafone V1640. I also have a T-Mobile SDA (on O2 UK) which has nina.ttf installed but it doesn't show all the characters (i.e. I still get some squares) which is why I want to try to get Chinese on my V1640.
The ROM is the latest i-mate WWE ROM.
I have a T-Chinese font (don't know the actual name of the font but it is definitely no included in the Chinese Windows) placed in the Windows/Font folder, but does it have to be a specific font (like MingLiu? it's quite big though)?
I forgot where the unicode option is. Encoding options in IE and E-mail are available (I can choose the language), but IE still can't display Chinese, despite the change in the encoding option.
Please help.
1; used my CAB right?
this can install wince.nls and enabler for the nls files.
Text message need the sytem font to discribe your languages.
so it means chinese font should be register as "System font"
you have never done that., i guess so.
Ok following the sample of font registry for Mingliu font.
1;way 1 <with the cab in this page>
import this with registry editor and put the Mingliu into windows folder.
and make soft reset, then you can solve all problem.
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
"MingLiu="\\windows\\tahoma.ttf,Tahoma"
"PMingLiu"="\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\mingliu.ac3,PMingLiu"
"Tahoma"="\\windows\\mingliu.ac3,PMingLiu"
2:way 2 <without the cab in this page>
Or you install my chinese enabler CAB.
(but you must uninstall previouse cab befor install thia\s)
http://www.asukal.jp/English/LocalizeCABS.htm
PLS go to the bottom of above page, then dl for the cab you wantt.
cab should be "for the WM5"
those were included registry and font. not mingliuy but chinese font in it.
I don't know any hebrew.
But I think the display hebrew on last pic is not correct,because there are so many same character in one line.
Asukal said:
1; used my CAB right?
this can install wince.nls and enabler for the nls files.
Text message need the sytem font to discribe your languages.
so it means chinese font should be register as "System font"
you have never done that., i guess so.
Ok following the sample of font registry for Mingliu font.
1;way 1 <with the cab in this page>
import this with registry editor and put the Mingliu into windows folder.
and make soft reset, then you can solve all problem.
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
"MingLiu="\\windows\\tahoma.ttf,Tahoma"
"PMingLiu"="\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\mingliu.ac3,PMingLiu"
"Tahoma"="\\windows\\mingliu.ac3,PMingLiu"
Click to expand...
Click to collapse
I use the PHM Registry Editor. Do I just create new "String" values? Also, do I have to create the location in the registry as it isn't there?
The font file is named HDZB_74.TTF by the way.
arabic doesn't seem correct from the screen shot... the right to left encoding isn't enabled which is making each word to print on it's own instead of getting merged
ady> Arabic "right to left", can it solve by registry tweak?
if so can you let me know??? i can not read Arabic acutualy
or the problem of font???
ft1860> i also can not know hebrew, so no way to know about the problem also.
also the problem came from Font or registry???
any way this ROM or cab just gives you wince.nls for encoding.
Hope each languages Experts tweak for detail and font link to discribe
correctly. i just put uni-code font to the demo fro other language which i couldnt read
richardrai>
yes you make new valu. if you think it is troublesum.
1:write your registry with text editor and save it as xxxxxx.reg file.
the head of registry need "REGEDIT 4"
2;use the TRE free registry editre;
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/tre_e.htm
and use import command from menu, them import the reg you saved.
then make soft reset.
if your registry is correct, your font can use as system font
3
Good luck.
Thank you for your effort. Finally there is a solution.
ady> Arabic "right to left", can it solve by registry tweak?
if so can you let me know??? i can not read Arabic acutualy Crying or Very sad
or the problem of font???
Click to expand...
Click to collapse
It may be solved by a registry tweak.
It is an old issue between the customers and the sponsor of I-mate. We have been seeking a convenient free solution to the right-to-left problem for a long time.
Anyway, I don't think the problem is from the font.
There is an example of a left-to-right text on the following link (the flash on the right side). http://www.imaginet-software.net/index.aspx?p=arabizer
Asukal said:
1:write your registry with text editor and save it as xxxxxx.reg file.
the head of registry need "REGEDIT 4"
Click to expand...
Click to collapse
Sorry just want to make sure whether there should be a space between "REGEDIT" and "4"?
No need Space. REGEDIT4 is ok. sorry make you confuse.
Arabic. ;;if some boday help me discribe the Registry, i will make a patch CAb for that.
too difficult to understand me that language
It works on WM5 already?! Hmmm.. the last time I checked it doesn't. Will check it out this weekend finger cross
I think it's font problem. Because even my device does not support display from left to right, my display of Arabic is perfectly correct. I use a font called DFHeiMedium from Dynalab. It is a unicode font.
Asukal said:
ady> Arabic "right to left", can it solve by registry tweak?
if so can you let me know??? i can not read Arabic acutualy
or the problem of font???
ft1860> i also can not know hebrew, so no way to know about the problem also.
also the problem came from Font or registry???
any way this ROM or cab just gives you wince.nls for encoding.
Hope each languages Experts tweak for detail and font link to discribe
correctly. i just put uni-code font to the demo fro other language which i couldnt read
richardrai>
yes you make new valu. if you think it is troublesum.
1:write your registry with text editor and save it as xxxxxx.reg file.
the head of registry need "REGEDIT 4"
2;use the TRE free registry editre;
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/tre_e.htm
and use import command from menu, them import the reg you saved.
then make soft reset.
if your registry is correct, your font can use as system font
3
Good luck.
Click to expand...
Click to collapse
When Every Soft Reset the ATOM Run's
Auto Cofigurator
How to Disable it Please Help me 8)
В HKCU/AutoConfig/Network, create string XPath with value operator № , (you can see it after runing autoconfig)
How do I find the Operator Number?
kropotov said:
В HKCU/AutoConfig/Network, create string XPath with value operator № , (you can see it after runing autoconfig)
Click to expand...
Click to collapse
Hi,
How do I find the Operator number? I am using Cingular Service.
thanks
tee
1. Run Autoconfigurator
or
2. find key DetectNet or NetworkID in HKCU/AutoConfig/Network
What you mean by create string XPath ... and how to do it.
first of all, install regedit, or resco explorer with regedit plugin.
2. go to HKCU/AutoConfig/Network,
3. create string with name "XPath" and with value operator №
kropotov,
Forgive me as I am pretty new at reg edits. If my operator number is 302720 can you please tell me exactly what I need to type into the spaces.
When I select new string I get value name with New Value %1 already in the box below it and also Value data with nothing in the box below it.
Value name:
New Value #1
Value data:
I would greatly appreciate your help.
Thanks
imapfsr
no problem bro!
I use resco exploer registry add-in.
In my case, operator# 25099
Lets begin!
1. HKCU/AutoConfig/Network
menu=>new=>string value
name-> XPath
String ->25099
done
!!!! turn off Atom for 30 seconds, to save changes!!!!!!
menu->exit.
thats all. soft reset.
kropotov,
tried it but it still asks for configure, must have missed something. Thanks anyways dude.
Todd
Wow, thanks man, that autoconfig was driving me really crazy(esspecialy the anoyng noice - "ding")
Thanks againg - it works for me
Oh, it work for me too. Thanks. It took me 4 months to find out the simple way to sovle it !!!
I have two problems and after searching for days I still can not find anything, so I was hoping that I could get someone that has an iPAQ hw6945 to please go to the following registry keys and tell me what entries are in your registry. Thanking you in advance for your help.
1. Can no longer see battery status (current or hidden) because I accidently erased something, & have pin pointed it out to these two entries.
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BatteryIF
"Index"=dword:
"Order"=dword:
2. Just curious if anyone else has entries or just blank like mine.
HKEY_LOCAL_MACHINE\SOFTWARE\Global Locate\Gpsct\3rdPartyCleaner
HKEY_LOCAL_MACHINE\SOFTWARE\Global Locate\Gpsct\BackDoor
Here is what I have on my 6955:
BatteryIF
Dll = Battery.Dll (string)
Index = 2 (dword)
Order = 0 (dword)
Prefix = BAT (string)
The Global locate entries you have listed are also empty on my 6955.
Hope that helps you out.
Thanks mdelleman for your response. I will try these, keep your fingers crossed. I appreciate your help!
Hi dudes!...someone have the values of HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH\CalibrationData for HW6945?
Sorry for my english
khigashi said:
Hi dudes!...someone have the values of HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH\CalibrationData for HW6945?
Sorry for my english
Click to expand...
Click to collapse
Hi,
You can't just add these values. You'll need to run the calibration in your Settings | Screen
Dirk
Tks Dirk for reply, but i can not get passed the calibration screen on my iPaq, i don't know why, so i skipped this process by deleting welcome.exe...and i think that with this values, i can fix those alignment problems.
Hi,
yesterday I decied to flash my XDA mini S(G3 device ) with the "SNN Edition Version 3.1 Windows Mobile 6.1 ROM", well there was no problem and the system works fine, but not the keyboard.
I'm a German person and I don't know whether there are differences between German and US/Brit XDAs. I go to my settings and changed the "Keyboard Layout" option to "German( Germany )", but there wasn't any effect. If I try to insert a symbol, which is displayed on the key a different symbol will be placed, e.g.:
! = ~
" = !
$ = @
$ = #
~ = ?
...
Can someone tell me how to fix it? Or it is the rom version?
Greetz Tobi
change registry
To resolve that problem. You use a registry editor as Resco.
Go to HKEY_CURRENT_USER > ControlPanel > Keybd
Then create a string value
Name : Locale
String : 0809
Save and soft reset device
Cool!
Hm no, it does not fix the problem completly. Ok ! = ! and some other symbols are fine now, not all, maybe there are some more layouts I can try out?
Ok, I think this link will solve your problem
http://forum.xda-developers.com/showthread.php?t=250046
Well,now all works fine
Thank you.
Greetz Tobi