RE: Disabling Activesync Internet Passthru
OK,
So I've seen about a million threads about it but no one ever answers the eternal question...
How does one disable internet passthru on activesync 4.1 and above?
I have searched all over the internet and on several forums to no avail... PLEASE I hope someone has a good idea on this
Thanks!
~Rick
in activesync, file connection settings.
change "this computer is connected to:..." from "internet" to "Work Network".
That doesnt work, it just nags me about not being able to find a server assigned IP address
Related
Hi there,
New the the whole xda wm5 thing and just getting my head round what I can and can't do with (so be prepared for some dumb questions from me). Here's my first 2:
I don't use outlook and all my email contacts are in thunderbird. Is there a way to import these to my xda without going through an outlook sync?
I only use the wlan when I'm at university. So far it connects fine and I can surf the web quite happily. I can also access my email (imap accounts) but, as yet can't send. This is because the uni network restricts functionality for basic connections. To send email, I need to establish a vpn connection. I've tried setting one up and telling it to connect but nothing happens. I've read on the forums about an issue that vpn is only supposed to be used for "work" connections - I think I set up my wlan connection to be a "connect to the internet" type. Does this mean that I cannot do what I'm trying to do - that is, connect to my uni wlan, establish a vpn connection, then use it to browse the web and send/receive email? Do I need to connect in 2 different ways to do what I want?
Thanks,
John
Q1 - no idea, sry
Q2 - If i remember correctly, you can set your VPN to connect to "my work network" (or make a new network group, call it Uni or something) then you can make that (Uni) network connect to the net. this should allow you to passthrough the local network and onto the internet.
If you dont know where the options are, look in settings/connections/connections/advanced. and/or post again for more help.
Hope it works
Cheers for the reply. I'll give that a go tomorrow.
Anyone any suggestions for the contacts import?
John
Any tips? I'm sure I have everything set up perfectly, but it just won't download any web pages. Is there something i'm missing?
I can download my e-mails fine (Hotmail, and IMAP) but can't get any web pages open using eather IE or Opera.
Cheers
Try disabling proxy on your GPRS/EDGE connection first (take note of the settigns first). I haven't been able to do anything using Activesync Passthru.
It was allready disabled.
I've just done a hard reset, and it still won't connect with a fresh Activesync connection. Any ideas?
ACTIVE SYNC AND INTERNET
Under options in ACTIVE SYNC---you have to have THIS COMPUTER CONNECTS TO INTERNET .
Thanks, but it's allready ticked.
Anything else?
hi!
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
ACTIVE SYNC AND INTERNET
I've also had problems if my OUTLOOK inbox is set to my POP MAIL ACCOUNT (YAHOO). When I check outlook mail for some reason it connects.
Also--what are your connection settings to get to INTERNET for your GPRS and WORK settings unrelated to active sync?
Re: hi!
guitarman_08 said:
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
Click to expand...
Click to collapse
I don't get what you mean. What will this do?
Cheers!
hi
Well, matheprat im just guessing if this is right... but i have encounter this problem wherein i can't load any web page on my ppc..theres an option on tweaks2k2 where you can chage PPC IE as IE 6.0 Well It will not totally chage but it will make your browser pass like an IE 6.0.. just try and let me know if you've done it
Thanks for the reply. I tried doing the above, and there's no change, I still can't connect. Every time I connect the PPC to Activesync I get a message saying that it's unable to find a server assigned IP. Ive tried using a specific IP (my computers), and leaving it to obtain one from the server, but neither work. When it was connecting before, i set it to obtain an IP from the server.
I also can't update the weather info for SPB Pocket Weather, but I can check e-mails (hotmail and IMAP), and sign into MSN on the device.
k!!
k!!
I want to use PPTP vpn connection to my work together with Remote Desktop (Teminal Service) application.
The PPTP vpn connection is established successfully.
From my work PC I can ping the pptp ip address of my PPC.
However if I switch to an application which would generate internet traffic (such as terminal services, internet explorer) my PPTP connection drops.
On my vpn server I get the logs and see the disconnect reason as "user requested)
What is the problem ?
Thanks...
hi,
I guess nobody has such experience with vpn connections.
where can I find information about this problem ?
thanks
Hi, I have the same problem more or less
see http://forum.xda-developers.com/showthread.php?t=291208
I have the same problem when trying to use Skype. My office also requires the use of a VPN (PPTP) when connecting via the wifi.
Skype connects, I can make calls, but the connection is dropped after 30s (the VPN is closed). Oddly enough, it I have the impression I prevent the VPN connection from dropping by using Pocket Internet Explorer at the same time (I have tried creating a website that automatically refreshes every 10s, but this didn't keep the VPN open). The Messaging client als shows odd VPN behaviour: it always closes the VPN, and opens it every time send/receive is selected.
I suspect not all programs keep the VPN open, even despite the fact that those programs are generating traffic over the connection.
Any hints or suggestions are greatly appreciated!
Jorg
(sorry, I can't edit posts in Opera Mini)
MarsRover: I have changed the AlwaysOn registry setting in the registry (in the folder of my work vpn). Ii appears to have changed the Messaging behaviour (but I need further testing to be sure). Tomorrow I'll see if it changed the Skype connection.
Thanks for the suggestion, if it works it ought to be put in the FAQ.
Jorg
Hi,
MarsRover,
I couldn't understand the solution. Can you explain ?
My situation is :
I am using Wifi connection to access internet. This connection is selected as my internet connection.
My pptp vpn connection is set under my Work connection.
So when I use the pptp connection I connect to Work over Internet.
But then it gets dropped if I open internet explorer.
If I set "*/*" to my intranet addresses, I have to connect to everywhere over my VPN connection. This is not good because I don't want to use VPN connection for Web browsing etc.
There must be another way ? Don't you think so ?
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Hi
You do not have to redirect all traffic through the VPN you can pick and choose under settings>connections>advanced>exceptions just add the urls you need. ie so instead of */* use the specfic range ie 10.0.0.*/* or whatever range your work uses. One more issue however if the wirless ip range overlaps the internal VPN work range you may still have isssues. ie if your wireless ip address range is 10.0.0.x and your vpn range is 10.0.0.x then even if you add 10.0.0.*/* in the exceptions it may still try the wireless link rather than the vpn link for your TS etc. If you get my drift. There is a discussion on this here:
http://forum.xda-developers.com/archive/index.php/t-217422.html
Stephen
Thank you Stephen.
In fact, I am aware of how the exception list works. I can add the IP addresses which I want to reach via work vpn.
However, I still wish that there was a way to use VPN connection manually without using an exception list.
Isn't this possible ?
mrmrmrmr said:
.... This is not good because I don't want to use VPN connection for Web browsing etc....
Click to expand...
Click to collapse
This is good for me because I DO WANT to use VPN for all network access.
mrmrmrmr said:
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Click to expand...
Click to collapse
It happens if you use settings->connections to view/change settings
hello...
i haven't a clue if this helps...
in my firm theres a cisco vpn connection... i search a long time for a programm that i can use with that vpn connection...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
futureshock said:
hello...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
Click to expand...
Click to collapse
where can I find it ?
does it connect to cisco vpn concentrator / ASA ?
there is also AnthaVPN from AnthaSoft but it's not very reliable.
PPTP
Bluefire seems to work fine with IPSec, but I need PPTP (IPSec requires NAT-T in most cases with GPRS/3G).
Eureka,Answer to Activesync popup"Unable to obtain server assigned IP" while syncing
Well, I am pretty sure that I had seen most posts/threads involving people having the same problem, having a popup during Activesync with USB, with header "Pocket PC NEtworking " and the body saying "Unable to obtain Server assigned IP Address. Try again later or enter an IP Address in Networking settings". I had tried the off fix, not including registry fix, and then I ran across this. I think this link will help everyones problem that use Activesync (and believe me, seems like a virtual ton of people ). I include the link . I tried the same fix, and everything works perfectly now.By the way, I reinstated all my devices on Bluetooth, and Com connections. I just felt that it was worthy of posting it here, and hopefully , if you agree, you can help by telling others. I include the link where I found it, and copy of the post . Hopefully I did do a good enough search, and there was no answer similar to this on XDA.
http://www.pocketpcmag.com/blogs/index.php?blog=3&title=everything_you_need_to_know_about_usb_ne&more=1&c=1&tb=1&pb=1#comments
Comment from: [Visitor]
I bought my first Pocket PC HTC HERMES(or TyTN?) 3 days ago and I had this problem of "Failed to Disable RNDIS" from the beginning. I tried to solve it by changing the registery but I couldn't locate the exact registery keys(Wittcomm or etc.) so given up.
Lately, I discovered that while I was pairing my device with Pc through bluetooth accidentaly I have created new COM entries. (look in settings-connections->bluetooth->com ports)
After deleting these COM entries as well as my device itself from bluetooth settings, I tried to disable RNDIS and voila! After unchecking advanced USB to PC connection box, now I have my first connection with ActiveSync.
I hope this helps.
12/11/06 @ 14:57
or try this
http://forum.xda-developers.com/sho...highlight=cannot+obtain+ip+address+activesync
Hi I recently signed up for a StrongVPN 3 Country deal to give me a stable VPN connection in China. I have set up all ok om my home PC and it works fine allowing access to sites otherwise blocked here.
Then i set up a VPN connection on my HTC Touch Diamond2 I can get the VPN to connect using either IPSec/L2TP or PPTP methods, however neither Tunnel seems to allow Internet access to either MS Explorer or Opera Mobile 10 or any other internet program.
In fact when i have established the VPN connection and then start my internet explorer or any other program which needs to access the internet then the VPN connection is dropped.
If I connect the VPN tunnel on the TD2 i can site there watching it for ages so it does not seem to be dropped after any specific time frame, only when I start an internet access program. for instance if i open my Hotmail account then the VPN connection stays until the point when i tap send and receive then it drops immediately and the hotmail account then synchronise mail via the standard wifi connection.
I also set-up my home PC to allow incoming connection and then set up another VPN connection on my TD2 to allow it to connect to my home PC. but whilst i can connect to my home PC i can not surf the internet using the VPN tunnel......I had thought that i might be able to start the StrongVPN connection on my homePC and then access it via the VPN connection from my TD2 to my HomePC but it does not seem to work that way.
My objective is to use my mobile phone to be able to surf social networking sites that are otherwise blocked by censorship.
Sorry for the long post but please could anyone with advise or experience at setting these two functions up on WM 6.5.3 please advise.
Well I think I may have found out the reason for the VPN connection to drop out....I needed to change my setting in CONNECTIONS and where before i selected my GPRS or EDGE service provider i now need to change that to "My Work Network" as this is where i set up the StrongVPN connection. now i have done this change to the settings the VPN connection does not drop out when any Internet program is started.
But I still can not access the blocked websites using StrongVPN on my WM device so I do not really know if it is using the VPN connection or not.....
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
ahmadnawaz said:
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
Click to expand...
Click to collapse
StrongVPN Help desk advised me to input their DNS server settings in to the VPN account settings. I will try this when i get back to China in September. the DNS settings are found by edit the VPN account then next, next and select "Advanced" then scroll to "Servers" there you can select manaual server address and use the one that you VPN service provider recommend.
Let me know how you get on.
I have a similar problem here. I have setup the VPN in network connections but am still unable to surf blocked sites. The VPN worked fine on my PC. I have also changed the DNS setting for the VPN but no luck. But since there was no popup windows telling me whether it is connected or disconnected, how do I know the status of the VPN connection? Thanks!
to see if you are connected just tap on the top info bar then u should see your wifi connect and also your VPN connection. if you enable sound notification for connections in sounds then you will also get an audible connect and dissconnect to let u know. remember to set all your connection settings to "work connections" as i fount if not then when u open opera or other program that needs internet connection it will disconnect the VPN connection.
Thanks. I have tried that and the VPN was online. But opera was just couldn't open any page. Eighter the factbook tab in TouchFlo3D couldn't login. Any idea?
Have the same problem connecting to my home network - Remote Desktop works fine, until I open a browser on my HD2 - changing settings mentioned above didn't help...
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
scv said:
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
Click to expand...
Click to collapse
I'm not sure what you mean by "added wild cards to exceptions"....what exceptions and where on your PDA did you add them?
As far as I was aware you are only able to set up a VPN connection in the "My Work Network" connections area. then to stop your VPN connection from being dropped by any application that access the Internet, you simply change your options to BOTH use "My Work Network" then the VPN connection is used for all applications.
However that said, I still cant access blocked sites using my VPN connection with StrongVPN in China. even after setting my Server DNS to that of StrongVPN it still does not work.
Anyone got any ideas why or how to access blocked content in China on their PDA??????
VPN 10 Reply
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
WiFi BUT NO EvDo FOR VPN Reply
Quick update - I now have this working at 100% through WiFi, where I don't need it.
Any updates?
- 2 Bunny
HINT INQUIRY Reply
Any updates on this one?
- 2 Bunny
CURIOSITY Reply
Any new thoughts on this?
- 2 Bunny
APRIL Reply
Any updates on this?
- 2 Bunny
DIAMOND IN NEED Reply
Any updates on this?
- 2 Bunny
kainppc6700 said:
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
Click to expand...
Click to collapse
same here
taker2
SOMEONE ELSE HAS THE SAME PROBLEM Reply
taker2 said:
same here
taker2
Click to expand...
Click to collapse
Great. Let me know if you get any updates. I'm still stumped on this one. What ROM are you using in your Diamond?
- 2 Bunny