Related
Tom Tom 6 and Artemis. Hoping my Initial Impressions may help someone.
Hi,
I'm a newbie... not up to the high standards of others here. But I thought it might be useful to give a newbies initial impressions on running TomTom 6 (application+DVD) on an Artemis.
I ordered TomTom from TomTom online. They quoted up to 5 weeks, but it took 5 days to get the DVD which contains application and Europe map and I received my TomTom 6 this afternoon and loaded it on my XDA Orbit with no real problems. (See below)
This goes against the advice of TomTom who say that it is not supported yet.
I started by resetting the XDA Orbit clean, which obliterated CoPilot.
TomTom 6 installed easily from the installation DVD.
Using the application software, I put the main program in the memory of the XDA, but put the maps and extra bits on a 2GB card. I was nervous about buying a 4gb or larger card , and so purchased a CNEX Flash format program to give me better control of what was happening on the Flash card.
The program installs on the PC first, and shows a split screen showing what's available to you on the left (e.g. DVD) and what's on your Artemis on the right (Memory & Flash card).
Registering was easy, but if you elect to pay for the Traffic reports etc, it's advisory to read the instructions to avoid losing out on the free month.
Finally, I downloaded John Cleese's voice at 10 Euros, since I'm a Python fan. This is nice.
Comparing it to CoPilot some issues struck me.
Good News?
-----------
First,It seems to be working well.
To my mind the range of TomTom extras seems huge and well developed. Colours, maps, layouts, voices. Good stuff.
I don't get CoPilot starting up at every opportunity.. like incoming calls. (Yes I've disabled the button)
I'll add to this thread anything I discover.
Problems?
----------
First, TomTom does not have an 'Exit' in the program like CoPilot. This was/is a pain.
No doubt I'll discover an answer from some helpful soul soon.
I press the red phone icon when in TomTom which brings up the XDA's menu. I can then I'm select Memory, Programs in use, and hit it over the head with a mallet.
It does raise the question what happens if someone rings me? More investigation needed.
Secondly, Tom Tom does not have a menu structure. You just touch the map which brings up options via icons. It works, but was/is not intuitive for me as CoPilot was.
I think I prefer the 2d direction maps of CoPilot to the 3D of TomTom. But it's early days.
General
-------
I have always had low Satellite reception on my XDA Orbit. Particularly in my house. CoPilot vsTomTom made no difference. In the car reception worked fine even with a heated front windscreen.
I've still got some ferreting around to do. I want to increase the warning distance from 200metres for one thing. I've also got to find out about the Traffic Alerts and how it works and can suggest rerouting etc.
All the best.
Hello!
It's obviuos you're quite new to TT, since there is an exit-button in TT, well it's somehow misplaced but it's there. When TT shows the map -> tap on the screen -> hit the next page button twice -> voila the exit button.
To edit the menu to your likings you can build your own TT menu. Onlineversion & Offlineversion. Just to make things clear the TomTom.mnu belongs in \TomTom\SdkRegistry
It does'nt make a difference if you use TT or another GPS-capable software in terms of GPS reception it depends only on the location your are roaming in (and I must say I'm more then positiv suprised with the quality of the GPS chip compared to all other devices I had before). Every software gets the same data from the Orbits inbuild GPS chip (well if you are intend to try MN6 it is likely you will experince problems with the positioning but it's cause MN6 is running slow as hell)
INFO:
There are hundreds of pois out there for TT for almost every thing, some are free and some are...well...search the internet.
...bye DonQ
DonQuichotte said:
Hello!
It's obviuos you're quite new to TT, since there is an exit-button in TT, well it's somehow misplaced but it's there. When TT shows the map -> tap on the screen -> hit the next page button twice -> voila the exit button.
Click to expand...
Click to collapse
yep. Day1! Thanks Don. Missed it completely!
DonQuichotte said:
To edit the menu to your likings you can build your own TT menu. Onlineversion & Offlineversion.
Just to make things clear the TomTom.mnu belongs in \TomTom\SdkRegistry
Click to expand...
Click to collapse
Thanks. The idea of being able to construct the pages in your own desired order is very appealing.
DonQuichotte said:
It does'nt make a difference if you use TT or another GPS-capable software in terms of GPS reception it depends only on the location your are roaming in (and I must say I'm more then positiv suprised with the quality of the GPS chip compared to all other devices I had before).
Click to expand...
Click to collapse
That's helpful. It's my first foray into GPS stuff, and I was suprised when I lost CoPilot over the Christmas period. The o2 rep said that it was the fog, and I still am sceptical that that was the whole story.
DonQuichotte said:
Every software gets the same data from the Orbits inbuild GPS chip (well if you are intend to try MN6 it is likely you will experince problems with the positioning but it's cause MN6 is running slow as hell)
Click to expand...
Click to collapse
Could you just expand a bit on this please ? Thanks.
DonQuichotte said:
INFO:
There are hundreds of pois out there for TT for almost every thing, some are free and some are...well...search the internet.
...bye DonQ
Click to expand...
Click to collapse
Thanks again
Ann D
Hello,
andromeda9 said:
Could you just expand a bit on this please ? Thanks.
Click to expand...
Click to collapse
What exactly do you wanna know? The GPS reception or MN6?
I've taken a look at MN6 about 2 weeks ago and it was not usable in any way. Navigating through the menu was horrible slow and from what I've heard from others it gives voice instructions way too late, just when you have passed destination/turnings. Also calculating the route is very slow.
I had the chance to test MN6 on a PNA (Transonic 6000) the other week and even on this kind of device it was not running that well but much much better than on my Artemis.
...bye DonQ
DonQuichotte said:
Hello,
What exactly do you wanna know? The GPS reception or MN6?
Click to expand...
Click to collapse
I'm new to both.. but MN6 really. (I presume MN6 is TomTom6)
DonQuichotte said:
I've taken a look at MN6 about 2 weeks ago and it was not usable in any way. Navigating through the menu was horrible slow and from what I've heard from others it gives voice instructions way too late, just when you have passed destination/turnings.
Click to expand...
Click to collapse
I get you. Hence my comment earlier about wanting to give myself more than 200metres warning.
So far not yet past destinations... but it's only day two.
DonQuichotte said:
Also calculating the route is very slow.
I had the chance to test MN6 on a PNA (Transonic 6000) the other week and even on this kind of device it was not running that well but much much better than on my Artemis.
...bye DonQ
Click to expand...
Click to collapse
That again is very helpful Don.
QUESTION:
-----------
Can you tell me whether the slowness etc is due to the software or is it something else?
I notice a thread about TomTom and T-Mobile MDA Compact 3 and it seems to run ok on that. Isn't the T-Mobile MDA Compact 3 roughly the same as my Orbit is is it the operator making a difference?
QUESTION:
-----------
Any tips to watch out for about running TomTom on the Orbit?
e.g. can for example the Artemis be overclocked and resolve some of these weaknesses ? What's your opinion?
Finally, I had NOT noticed but TomTom was booting up at each soft reset. I turned it off but hadn't noticed that the GPRS was still live ... hence a bigger bill for GPRS than I was expecting.
I had a look on the sd card and found the TomTom auto Autorun file called Start.exe in the root Dir of the card. I moved it into another folder and all is ok. Most of the time now TomTom does not start up unless I invoke it.
QUESTION:
-----------
When TomTom exits can the GPRS link be broken off automatically?.. might save me a few pennies?
Thanks
andromeda9 said:
QUESTION 1:
-----------
Can you tell me whether the slowness etc is due to the software or is it something else?
I notice a thread about TomTom and T-Mobile MDA Compact 3 and it seems to run ok on that. Isn't the T-Mobile MDA Compact 3 roughly the same as my Orbit is is it the operator making a difference?
QUESTION 2:
-----------
Any tips to watch out for about running TomTom on the Orbit?
e.g. can for example the Artemis be overclocked and resolve some of these weaknesses ? What's your opinion?
Finally, I had NOT noticed but TomTom was booting up at each soft reset. I turned it off but hadn't noticed that the GPRS was still live ... hence a bigger bill for GPRS than I was expecting.
I had a look on the sd card and found the TomTom auto Autorun file called Start.exe in the root Dir of the card. I moved it into another folder and all is ok. Most of the time now TomTom does not start up unless I invoke it.
QUESTION 3:
-----------
When TomTom exits can the GPRS link be broken off automatically?.. might save me a few pennies?
Thanks
Click to expand...
Click to collapse
Hi Ann,
I just got my MDAC3 as well and have just installed TT6 from a DVD. These are my thoughts to your questions above. I did a bit of web searching before I got one though, to find out that YES, the MDAC3 = O2 Orbit = Dopod P800W = HTC Artemis (with(out) various options made possible by Texas Instruments(the makers of the hardware) [MDAC3, Orbit, Dopod P800W are corporate brand names of the various carriers in their relevant countries, but are all know and referred to as ARTEMIS in the development circles.]
Answers to Q1 and Q2: -
I think the slowness may be due to a combination of several things.
a.) The type of microSD card you have in your set - when I was searching to buy one, I noticed there are 2 types : a normal one and and ultra II. The difference is the ultra II has a faster read/write speed, which is affects the general speed/performance of the TT6.
b.) AFAIK(As far as I Know) The orbit has a bit more capabilities than the MDAC3 such as WIFI. This additional function the same processor-OMAP850 has to cater for. Now, this porcessor is not necessarily the most efficient or the fastest available, so impacts performance as well.
c.) If you overclock, there will be a noticable improvement in performance, and a corresponding increase in battery consumption, but this may not translate to an improved experience with TT6, if you have it on a normal card vis ultra II.
The speed of refreshing the map overlay and playing the sound files associated I believe is the reason you hear the instructions after passing the landmarks/turnings, all of which I think is due to the card read/write spead again, plus the processor speed.
Answer to Q3
Its surprising that you mentioned GPRS - as this differs from GPS which the TomTom uses, though I was made to understand that a SatNav software may also use the GPRS (wierd - as this is VERY expensive if you dont have the unlimited package only available cheaply on T-Mobile). You may want to check the the connection settings of the TomTom, changing it to connect using the GPS on a port you set on the hardware.
Start Menu > Settings > System> GPS > Hardware (You may also set the port for TT6 to connect on the Program window.
TT6 starts the GPS receiver upon request for navigation (which I thought was intelligent - to save battery power)
Lastly,
IMOE (In my own Experience) I initially installed the TT6 software + maps from the DVD + POI overlay to the microSD ULTRA II, and noticed it froze up many times then I installed in the phone memory, removed the overlay (TT6 has a manageable one), maps still in the microSD and it stopped freezing up, plus refresh of map was every second.
Now I have overclocked with the hope of a good performance whilst multitasking, which is Ok with some combinations and not with others. Hence my conclusion as stated above. The processor really can be better, but Vs price, it will not be marketable in its class with the many ther products out there at the price it is given.
I hope I have been of some help.
Cheers
AD10
You can use a 2D map mode if you really want to, go to change preferences/ Turn off 3D display.
You can overclock the unit but I have found no valid reason to actually do this.
The GPRS charges are only applicable to the actual data transferred to/ from your device, so don't worry about it remaining connected - if there is no data traffic there will be no extra charges.
Leave the GPS applet alone (the one that exists in the settings menu) this often leads to confusion and is only really needed to be used/ set-up IF you want to run two applications at the same time (not something the Artemis excels at due to the processor power). Set to Other NMEA GPS receiver/ Baud 9600/ COM4 should be all that is required.
As for poor GPS reception, you mention the car has a heated screen, is this Athermic glass which is known to attenuate the signal or a standard wire heater element embeded in the glass (which do not affect GPS performance) - make sure the Quick GPS data is up to date, and don't drive around until the device has actually locked on to the signal - Mike
AD10 said:
Hi Ann,
I just got my MDAC3 as well and have just installed TT6 from a DVD. These are my thoughts to your questions above. I did a bit of web searching before I got one though, to find out that YES, the MDAC3 = O2 Orbit = Dopod P800W = HTC Artemis (with(out) various options made possible by Texas Instruments(the makers of the hardware) [MDAC3, Orbit, Dopod P800W are corporate brand names of the various carriers in their relevant countries, but are all know and referred to as ARTEMIS in the development circles.]
Answers to Q1 and Q2: -
I think the slowness may be due to a combination of several things.
a.) The type of microSD card you have in your set - when I was searching to buy one, I noticed there are 2 types : a normal one and and ultra II. The difference is the ultra II has a faster read/write speed, which is affects the general speed/performance of the TT6.
b.) AFAIK(As far as I Know) The orbit has a bit more capabilities than the MDAC3 such as WIFI. This additional function the same processor-OMAP850 has to cater for. Now, this porcessor is not necessarily the most efficient or the fastest available, so impacts performance as well.
c.) If you overclock, there will be a noticable improvement in performance, and a corresponding increase in battery consumption, but this may not translate to an improved experience with TT6, if you have it on a normal card vis ultra II.
The speed of refreshing the map overlay and playing the sound files associated I believe is the reason you hear the instructions after passing the landmarks/turnings, all of which I think is due to the card read/write spead again, plus the processor speed.
Answer to Q3
Its surprising that you mentioned GPRS - as this differs from GPS which the TomTom uses, though I was made to understand that a SatNav software may also use the GPRS (wierd - as this is VERY expensive if you dont have the unlimited package only available cheaply on T-Mobile). You may want to check the the connection settings of the TomTom, changing it to connect using the GPS on a port you set on the hardware.
Start Menu > Settings > System> GPS > Hardware (You may also set the port for TT6 to connect on the Program window.
TT6 starts the GPS receiver upon request for navigation (which I thought was intelligent - to save battery power)
Lastly,
IMOE (In my own Experience) I initially installed the TT6 software + maps from the DVD + POI overlay to the microSD ULTRA II, and noticed it froze up many times then I installed in the phone memory, removed the overlay (TT6 has a manageable one), maps still in the microSD and it stopped freezing up, plus refresh of map was every second.
Now I have overclocked with the hope of a good performance whilst multitasking, which is Ok with some combinations and not with others. Hence my conclusion as stated above. The processor really can be better, but Vs price, it will not be marketable in its class with the many ther products out there at the price it is given.
I hope I have been of some help.
Cheers
AD10
Click to expand...
Click to collapse
Truly excellent stuff.
Thanks!
mikealder said:
You can use a 2D map mode if you really want to, go to change preferences/ Turn off 3D display.
You can overclock the unit but I have found no valid reason to actually do this.
The GPRS charges are only applicable to the actual data transferred to/ from your device, so don't worry about it remaining connected - if there is no data traffic there will be no extra charges.
Leave the GPS applet alone (the one that exists in the settings menu) this often leads to confusion and is only really needed to be used/ set-up IF you want to run two applications at the same time (not something the Artemis excels at due to the processor power). Set to Other NMEA GPS receiver/ Baud 9600/ COM4 should be all that is required.
As for poor GPS reception, you mention the car has a heated screen, is this Athermic glass which is known to attenuate the signal or a standard wire heater element embeded in the glass (which do not affect GPS performance) - make sure the Quick GPS data is up to date, and don't drive a
round until the device has actually locked on to the signal - Mike
Click to expand...
Click to collapse
Thank you Mike
They are very very useful tips!
Appreciated
hi there
i have just fot the xda orbit and just trying to find me way round it but i was hopeing for a helping hand from anyone on here , i want a sat nav on it but is there any software you can get which means you dont have to pay to use and i want a to try obatin spb pocket software any ideas how i would get that please
i look forward to hearing form anyone lol
briancross said:
i have just fot the xda orbit and just trying to find me way round it but i was hopeing for a helping hand from anyone on here , i want a sat nav on it but is there any software you can get which means you dont have to pay to use and i want a to try obatin spb pocket software any ideas how i would get that please
i look forward to hearing form anyone lol
Click to expand...
Click to collapse
This thread is all about TomTom6. Best Sat-Nav software I have found for the Orbit. Doesn't cost anything to use after you purchase the software, unless you want to add the extra's, like Traffic data or Weather data.
TT6 and WM6 sloww processing
I updated my Orbit to WM6 yesterday and was a bit annoyed that TomTom has slowed down to a point where it's pretty useless for navigating. this is made worse by the fact that on WM5 it was faultless, and a lot faster to process than an Eten glofiish X500, which has a 400MHz processor!
Can I roll my Orbit back to WM5? If so, how do I do it?
nubbin said:
I updated my Orbit to WM6 yesterday and was a bit annoyed that TomTom has slowed down to a point where it's pretty useless for navigating. this is made worse by the fact that on WM5 it was faultless, and a lot faster to process than an Eten glofiish X500, which has a 400MHz processor!
Can I roll my Orbit back to WM5? If so, how do I do it?
Click to expand...
Click to collapse
You can download O2 UK WM5 ROM from these forums. just run this and you should be OK back to WM5.
On a different note. I too installed WM6 onto my Orbit and noticed NO slow down in speed of navigation. If anything I noticed it was slightly faster. Not sure why you experience the opposite from me.
Only thing I can think of is:- Did you install O2 WM6? or B&B v4?
Shand359 said:
You can download O2 UK WM5 ROM from these forums. just run this and you should be OK back to WM5.
On a different note. I too installed WM6 onto my Orbit and noticed NO slow down in speed of navigation. If anything I noticed it was slightly faster. Not sure why you experience the opposite from me.
Only thing I can think of is:- Did you install O2 WM6? or B&B v4?
Click to expand...
Click to collapse
I've got my upgrade from the official O2 site. tell me more about B&B v4? What is it, where is it, and is it any good? Can I do another install over the O2 WM6? Thanks in advance.
nubbin said:
I've got my upgrade from the official O2 site. tell me more about B&B v4? What is it, where is it, and is it any good? Can I do another install over the O2 WM6? Thanks in advance.
Click to expand...
Click to collapse
Go into the mobile 6 thread in the forums. Black & Blue version4 looks a lot better that O2's WM6 and runs a damn site faster too. Do not upgrade to O2 WM6 first though. You need to be running WM5 and then upgrade to B&B 4 as the upgrade does something to the handset and seems to block any further update.
Before you do anything you need to download and install USPL on your handset. If you don't do USPL first you will end up with a stylish "brick"
Shand359 said:
Go into the mobile 6 thread in the forums. Black & Blue version4 looks a lot better that O2's WM6 and runs a damn site faster too. Do not upgrade to O2 WM6 first though. You need to be running WM5 and then upgrade to B&B 4 as the upgrade does something to the handset and seems to block any further update.
Before you do anything you need to download and install USPL on your handset. If you don't do USPL first you will end up with a stylish "brick"
Click to expand...
Click to collapse
Many thanks for that. I searched the site last night, and found B&B v4, and V3.7, and also USPL. Unfortunately, I had already upgraded with the O2 WM6, so although I have also been able to roll back to WM5 (and TomTom is now back up to speed), I am getting the "Image file corrupted" message with any attempted update, including USPL. Looks like I've been blocked from any updates unless anyone has a solution? I still have my Glofiish X500 running WM6, but the XDA runs TomTom more quickly.
nubbin said:
Many thanks for that. I searched the site last night, and found B&B v4, and V3.7, and also USPL. Unfortunately, I had already upgraded with the O2 WM6, so although I have also been able to roll back to WM5 (and TomTom is now back up to speed), I am getting the "Image file corrupted" message with any attempted update, including USPL. Looks like I've been blocked from any updates unless anyone has a solution? I still have my Glofiish X500 running WM6, but the XDA runs TomTom more quickly.
Click to expand...
Click to collapse
This has happened to a few people. Download the file again and try.
P.S. Are you using XP or Vista. Vista seems to be a bit problematic. Some people have gotten Vista to flash ok, I on the otherhand have not.
For complete trouble free flashing use XP.
Run start_uspl.exe file, then after phone has rebooted again, run the ROM of your choice and upgrade to WM6. You won't be disappointed.........unless you run the O2 WM6 which I have found to be a big disappointment.
Success!
Hi Shand359
The Artemis USPL successfully "unlocked" my XDA, and after that it was an easy ROM update - I know have a fully functional B&B v4! Many thanks for your help and advice - donation to PDAViet on it's way.
TomTom v660.1256 map now working just as well as before - just in time for my 10 day driving trip to Spain at the end of the month. I thought I was going to have to buy a TomTom unit, but no need now.
Incidentally, I haven't worked out what "Touch Flo" is all about - can you enlighten me?
nubbin said:
Hi Shand359
The Artemis USPL successfully "unlocked" my XDA, and after that it was an easy ROM update - I know have a fully functional B&B v4! Many thanks for your help and advice - donation to PDAViet on it's way.
TomTom v660.1256 map now working just as well as before - just in time for my 10 day driving trip to Spain at the end of the month. I thought I was going to have to buy a TomTom unit, but no need now.
Incidentally, I haven't worked out what "Touch Flo" is all about - can you enlighten me?
Click to expand...
Click to collapse
If you press the windows key ( beside the GPS key) then drag your finger across the screen from left to right, the cube should spin with different icons on it. Looks cool.
Touch Flo
Got it now. Even my teenage son thinks it's "way cooooool"!
Using TomTom v7.450 (build 9028) the device can work fine for hours, but sometimes I start Tomtom and it will find a GPS signal and then immediately drop it again.
When I look at the satellite information, it will do this...
1. No GPS device!
2. Poor signal, are you indoors?
3. Built-in GPS receiver
4. No GPS device!
5. Poor signal, are you indoors?
6. Built-in GPS receiver
7. No GPS device!
and repeat..
You can view a video showing this effect
@ youtube: http://uk.youtube.com/watch?v=VRkPmhbst0o
@ http/avi: http://phat.nooblet.org/htc.touch.hd_tomtom.gps.avi
Hi, I've the same problem on my Blackstone, GPS works well for days bu from today the GPS signal result discontinuous with any navigation software like Tomtom(various versions), Trackypro and iGO8...any idea? Thanks
I had the similar problem when I first installed TomTom. Which settings are you using? Because I used "built-in GPS" for TomTom and had the above problem. When I changed it to "Other NMEA GPS" with baud rate at 11200 ()or whatever the max is + COM4 then gps started working like a charm. Since then no signal drops, no lag and very quick fix. Not sure if it is just by chance or is it a real fix for the above problem, but worth trying as its working for me. However, it has been 2 days only. Not sure if after a while I will have this problem or not. I am using Tom Tom 7.910 with maps 6.75.
Can You try to set the hardware port from <None> to COM9? Seems work better, the GPS signal still present...but for now I'm at home
I have more or less the same problem !
Using TomTom v7.450 (build 9028) the device works fine the 1st week, but now, I start Tomtom it xan't find GPS device !
I tried to reinstall all without success...
I also tried all the COM available !
using tomtom 7 with NMEA com 4 max baud rate. Works just fine. 8 or 9 sats locked on constantly in open areas
I'm having the same problem, although I don't have TomTom 7. But it doesn't seem to be just TomTom that's having trouble finding the GPS (and when it does, it'll never get a fix).
The Google Maps application also gives me the "No GPS found" attitude.
I've installed the HTC GPS Tool, which does seem to find a bunch of satellites, but they all stay no-fix-reddish.
Are there any guidelines on how to setup the GPS on this thing? I find it a bit strange that my settings menu only lists an option "External GPS", and no "Internal/Built-In GPS".
Can confirm that the dropping of GPS is in other applications.
I use zürich map from Lonely Planet (sure its form 2003) and it will drop the signal in the open.
Have a feeling its internal on our devices.
One possibility is A-GPS.
It is Disabled by default, but it is possible that with tools like HD Tweak or Advanced Config Tool, you, even by being unaware of it, you activated (or better : enabled) it.
To me, it was a winner : after re-disabling A-GPS, my GPS started to be stable again, no matter what port I choosed and how I configured the Navigator program.
Give it a try, could be the solution that works for you
Hi there,
I've just picked up my lovely HTC Touch HD - I'd like to buy the TomTom 7 and the correct maps to go with it to allow it to work.
Can someone please tell me where I can go to stick my Visa card details into and buy please! i'm pretty confused on the TT website and on here there's allsorts of version numbers etc mentioned!
I'd just like to have a stable running TT on my Touch!
Any chance of also having the US & Canada maps working as well as the UK maps ?
Thanks !
Dennis! West London UK!
This is not a TomTom issue. I have same problem with IGo and VisualGPSce.
I use to resolve this issue this way (in IGo or VisualGPS) : I change the baudrate in GPS configuration. Switching 19200 to 38400, or reverse, or whatever : the GPS locks and is stable after few baudrate switches.
Theres some reports that the default "sleep" timeout for GPS is 1 second. Apparently the Microsoft Intermediate Driver only updates every 1 second so it could just miss it and go to sleep!
Try changing registry entry to 2000 (milliseconds)...
HKLM->system->currentcontrolset->GPSIntermediate Driver->Drivers-> SleepOnNoData
Tirinoarim said:
Theres some reports that the default "sleep" timeout for GPS is 1 second. Apparently the Microsoft Intermediate Driver only updates every 1 second so it could just miss it and go to sleep!
Try changing registry entry to 2000 (milliseconds)...
HKLM->system->currentcontrolset->GPSIntermediate Driver->Drivers-> SleepOnNoData
Click to expand...
Click to collapse
Already did it (currently set to 2500). But changes nothing (even after soft reset) : GPS keeps deconnecting/reconnecting as described (not every time; one in a while..).
Thanks anyways !
Just out of interest, do you have MobileJustice installed by any chance?
Absolutly not. Nor any software of this type, nor any software who can possibly take GPS in background..
I had the problem of TomTom getting satelites and then dropping them and saying it couldn't find the gps.
Disabling agps (quick gps) via advance config seemed to sort out the problem
AGPS is *not* quickGPS in my understanding. But this is unclear. For a proof, AGPS comes disabled by default, but quickGPS works out of the box. Can someone who knows for sure, precisely state if AGS and quickGPS are the same thing or not ?
I have disabled AGPS also with HD tweak (but quickGPS stills work..), and I have regulary (2 out of 3 times) this problem.
I had the same problem. Disabling the AGPS seems to have worked but I will wait for the data to expire before confirming.
The problem seems to be when I have poor GPS reception AND poor GSM. They seem to be calling upon each other for corrections but never resolve.
If this is the solution I will just rely on QuickGPS alone which has worked fine for years with TTN6.
Edit: I can now confirm disabling AGPS solved my problem.
had TTN7 running for a few days now.
Can't find the built in GPS. Having to set it to other Bluetooth GPS Receiver.
A bit hit and miss with signal / getting a fix.
I have turned off AGPS as well. Going to try out some of the settings you all have put up tomorrow.
AlexEv said:
had TTN7 running for a few days now.
Can't find the built in GPS. Having to set it to other Bluetooth GPS Receiver.
A bit hit and miss with signal / getting a fix.
I have turned off AGPS as well. Going to try out some of the settings you all have put up tomorrow.
Click to expand...
Click to collapse
Working great ...
AGPS off - Using COM 4
Hi Forum,
I desperately need your help on this. I had installed a software called mapmyindia. It ran fine for like 20 days.Now yesterday it seems that it failed to lock on GPS. I can see that it has about 6 satellites visible but used is 0.
Now I thought this could be an issue with the software, removed it. trying to use it on Google Maps. It continuously hovers on seeking satellites(0).
I did a hard reset of the phone, no go.
Any help or assistance or pointers would be really really appreciated.
To be honest, I am little worried now that my GPS could be fried on the phone and will never be able to use it again
hallo,
try with Google Maps GPS Settings "manual", and enter "ComPort 4" "Baudrate 4800"
use QuickGps prior to accelerate search
HI, i tried the same and its not working.
Setting the manual entry on COM 4 with 4800 baud no luck.
even tried downloadingthe latest version of quick gps no luck.
Any tests that i can try would be very helpful.
try enabling A-GPS. that might help you too. as a summary:
1. run quick gps to download the satellites position.
2. Open google maps/Live maps
3. get a position with good radio signal (recommended open sky for the first time).
4. enable "use gps" in google maps/live maps.
5. wait around 30-45 seconds.
6. good luck.
i think this sometimes happen to me too.
Im using Garmin XT and sometimes it takes AGES to lock into position. Google maps sometimes takes ages too.
Using quickgps might be helpfull, also try to get a perfect clear sky. I seems to have trouble finding one when the sky is cloudy and such
Also, just wondering, is that COM 4 and 4800 baud the default setting for X1?
Hi everyone
I have recently updated to 1.56.405.1 ROM which also included Radio update to 1.13.25.24. However, I have noticed that my GPS no longer works on this ROM. in google maps, it shows "Seeking GPS satellites(0)" forever.(Com4 port for internal and none for external devices) I tries changing baud rate to different settings - 9600, 57000 etc, but even if I press "ok" after setting baud rate, somehow, it comes back to its original to 4800. How this happens ???? its really frustrating. My earlier ROM (1.19.xx) used to show GPS position using Googe maps.
Can any1 guide me how to make things work here?? Also, can some1 please post ideal GPS settings?
I know this will not be helpful, but I'm using Miri wm6.5 v9.2 which my gps locks on within 30 secs on TomTom, Memory-Map and Garmin. Google maps locks in quickly. I used the default settings (com 4) and all works fine.
The ideal GPS settings are default settings
Program port: COM4
Hardware port: none
Baud rate: 4800
Manage GPS automatically: checked
Any other settings of GPS you should set from GPS application.
Thanks guys...I'll try these and reply you back here. Please do read this thread after a couple of days.
default setting is baudrate:9600 isn't it?
No, read above, please
Can you actually change the baud rate? It reverts back to 4800 when you re-enter the settings, so I can't change it at all.
To,
the person above this post
same here dude !! earlier I could change in 1.19XX rom. but ever since I have flashed to 1.56, i'm facin this problem you've mentioned.
BTW, do you get GPS application working properly or same like mine?? [pls. read 1st post in this thread]
Regards
Ash
If you read up in the internet, you can read everywhere that the default value for the baudrate is 9600, so that the internal GPS receiver is demanded best of all in navigation software.
And you say it would be in 4800 now?
i have the same new stock rom and i have four working gps programs which all also lock to satellites within thirty seconds without ever seeing the settings yet along changing them :S are you guys sure this problem is not self inflected .. i wish i could help but i have no idea how..
the applications i use are route99, garmin, navNgo and another one which i forgot since i dont use that often.
koboltzz said:
If you read up in the internet, you can read everywhere that the default value for the baudrate is 9600, so that the internal GPS receiver is demanded best of all in navigation software.
And you say it would be in 4800 now?
Click to expand...
Click to collapse
Not true.... i have done a lot of reading into this on various forums and settings can depend on radio's, roms, devices and software used. Also i am using 1.56 wwe and my default settings are 4800, com4, none hardware port, windows manage and my gps works fine, cold start about 20 secs, warm start up about 5 secs depending on location and weather conditions!
Conclusion, well i dont have one yet, i am trying to compile a list of typical settings device specific but it is fairly obvious that there are a lots various circumstances
For those interested in whys and hows heres some bedtime reading for starters:
http://forum.xda-developers.com/showthread.php?t=363431
http://forum.xda-developers.com/showthread.php?t=375959&page=6
http://www.google.com/custom?hl=en&...WDx9c&boostcse=0&q=gps+settings&start=40&sa=N
What I've noticed on 1.56.401.0 WWE ROM is that GPS fix with Garmin Mobile XT is much faster, but the icon on Garmin "home" screen shows as no signal. I can navigate as before, maybe even better, just this funny thing with signal indicator... Any1 else with this issue?
ash3012 said:
Hi everyone
I have recently updated to 1.56.405.1 ROM which also included Radio update to 1.13.25.24. However, I have noticed that my GPS no longer works on this ROM. in google maps, it shows "Seeking GPS satellites(0)" forever.(Com4 port for internal and none for external devices) I tries changing baud rate to different settings - 9600, 57000 etc, but even if I press "ok" after setting baud rate, somehow, it comes back to its original to 4800. How this happens ???? its really frustrating. My earlier ROM (1.19.xx) used to show GPS position using Googe maps.
Can any1 guide me how to make things work here?? Also, can some1 please post ideal GPS settings?
Click to expand...
Click to collapse
Hello ash3012,
I'm having the exact same problem, can u please tell me how did u resolve the issue?
thanks
Hi everyone new here. I am having some issues with getting my GPS to work properly.
I have noticed that if I use my phone without a sim inside then the GPS locks on pretty quick.
However if I put my T-Mobile sim inside and try getting a lock on the GPS it does not work, it keeps saying locating GPS in digital compass or seeking satellites in google maps. I have tried updating GPS satelite using quick GPS too but that didn't help.
So basically the GPS works when there is no sim inside the phone but doesn't when there is a sim (T-Mobile sim) inside the phone.
Does anyone know what could be the problem and how I can get it to work with the sim inside the phone?
Phone details:
My phone is running on the generic 1.66.405.2, ROM from the HTC website. I also HSPL2ed it as it was on the Tmobile rom. However the phone is still locked to Tmobile UK.
Reply With Quote
i got the same problem, it doesnt find a satalite in google maps. but it works very fast when im outside and set the gps manually in google maps. it works with com4 and 256000 rate, but it never works when i let it manage by windows..
its the same problem i had with my old omnia :/ lucky i dont use it that much, but would be nice if i could use it when i really need it.. >.<
never tried it without sim card, and i dont want to try it.. for what should i use the phone without sim card, it would not work for google maps anyway without internet connection
But there is no option to select 256000 as the baudrate.
Also when I change the com port to com4 on the gps hardware setting and press ok to exit and go back into it to check to see if the setting has been saved I find that it reverts back to its original setting of Hardware port= None and Baudrate-4800. Why does it do that?
for me there is an option for that rate Oo in google maps i mean..
but yea, u are right, my options got reverted too :/ i dont know why..
Could you tell what settings do you use in your external GPS?
Also are you able to get a GPS lock in your digital compass, could you check? Thanks.
the external gps settings are:
programm ports: com4
gps hardware port: none, baudrate 4800
and access -> manage gps automatically ON
standard settings, didnt change them
and how to use gps with the digital compass? ^.^ i only know that the compass worked with google maps when i needed it 2 weeks ago xD
Thanks for the settings mate.
Yeah you set a location on google maps and then it locks on to the gps in the digital compass and you get the longitude and latitude displayed in the digital compass.
There is also the appearance of this green light that rotates around the circumference of the compass as you move your phone, wonder what the green light indicates..
TitanXT said:
There is also the appearance of this green light that rotates around the circumference of the compass as you move your phone, wonder what the green light indicates..
Click to expand...
Click to collapse
the green dot points towards the destination you chose. it's a heading marker.
Ah right cheers for that mate.
Btw I managed to get the GPS working, I think its just the sim reception that makes it the gps signal weaker when I try to lock on to gps satelites.
A simple solution for SEEKING SATELLITES (0) problem - Telstra HTC HD2 Google Maps
After frustrating weeks trying to have my GPS working on Google Maps, I've managed to find the solution for my "SEEKING SATELLITES (0)" problem when using Google Maps on my Telstra HTC HD2.
I've just turned AGPS Service OFF (Start --> Settings -->Location).. bingo.. it now locks to the satellite in a matter of seconds...
I hope this post will help other people who might be experiencing the same frustration I did..
Cheers!!