I woke up this morning, tried to make a call, & it just goes Ding Ding Ding a few seconds after I press talk & wont go through. I soft reset it twice now, pulled out the battery for 20 seconds or so & still nothing. Does anyone have a clue as to what may be the issue?
Please help!,
john
Well, dunno if it would help, but you can try to make a backup (just incase, with spb backup or something) and then do a hard-reset. Look how it goes after that.
Thanks
Thanks for the prompt response. I've since figured out it is a network issue & not my phone thank God.
john
Related
Dear Friends,
I am new to this forum as well as to O2. My MD few days purchased an O2 Xda mini S. Till yesterday it was working perfectly fine.
Today onwards when I try to send SMS (Text Message) the phone displays the following message "The phone is not ready. Wait 15 seconds and try again."
He is unable to send SMS because of this and the ball is in my court now. I need to solve this problem somehow. Please help me
Regards
This is a known bug with the phone, and I don't know any easy way around it. The only solution is to soft-reset, then wait about 5 minutes, and go in and send an SMS. It usually happens when you try to send an SMS shortly after starting the radio (i.e. resetting the phone, or coming out of flight mode).
Help !! How to soft reset
elyl said:
This is a known bug with the phone, and I don't know any easy way around it. The only solution is to soft-reset, then wait about 5 minutes, and go in and send an SMS. It usually happens when you try to send an SMS shortly after starting the radio (i.e. resetting the phone, or coming out of flight mode).
Click to expand...
Click to collapse
Thank you for the info. I don't know how to soft reset the phone and will I lose contacts, SMS, GPRS settings etc if I go for a soft reset.
As I said in my previous message I am new to Windows OS for mobiles. All my earlier phones were Nokia.
Would be helpfull if somebody tell me how to soft reset the phone and also please let me know wether I will lose all my data if I do a soft reset.
Thanks in advance
soft rest - poke the stylus tip in the hole on the right, next to the IrDA window.
and no, you won't lose all your data. WM5 uses persistent storage, kinda like Flash memory. Even if your battery dies, your data remains.
I am a bit of a newbie...
My device was working perfectly. THen I started up AIM this morning and it froze. I reset it, but now when it powers up, it is frozen, nothing works or happens. If I call the device the phone doesn't even ring. NO clue how to fix it and any info would be much appreciated.
Thats very strange. Try pulling out the battery and let it sit for about a minute or 2. If that doesnt work, then try to return it for a new one. If you somehow get into the start menu, go to settings and then the system tab. Click on "Clear Storage" witch will reset the device back to the way it was when you first took it out of the box. Yes, you will loose all info stored in the PDA but its better than not being able to use it at all. But this does tend to fix 80% of problems.
I had a similar problem today... I installed netframework and after that it stop responding.... the only working thing is the power button and when I press it the only thing I can do with the stylus is select yes or not... other then that wherever I type it does nothing!!! have you solve it?
Read this man... http://forum.xda-developers.com/showthread.php?p=1026999&posted=1#post1026999
Hello everyone!
My Wizard's vibration has suddenly stopped working
I tried everything but it still doesn't work whether for incoming calls or sms...
What can I do?
Thanks in advance
Nicolò
What exactly 'did you try everything' ?? And what did you do before it stopped working? Maybe this way we can nail down the problem a bit faster ...
I tried all those settings in the control panel about "notifications and sounds", for incoming calls and sms...but nothing
Before it stopped working I didn't do anything, it just stopped...but I guess I did something, PCs don't go crazy like this
I am not sure if you made any changes in the Registry (actively or by installing software).
If you have not much stuff on your device or if you have the possibility to make a FULL BACKUP (with Spb Backup or similar application) try if the vibration will work after a hard reset (before loading back you backup).
There can be also a hardware failure (vibration motor defect) but before asuming that it is better to check if it will work again after resetting the device to factory defaults.
I re-installed the operating system twice but it still doesn't work
I guess i'll have to get it repaired...
Did you perform a hard reset?
I'm not sure..what do you mean by hard reset? How do I do it? And what does it do?
Thanks
Try searching.
http://www.htcwizardweb.net/node/116/
Hey
I performed a hard reset but still nothin.
Plus it does not ring too, it just appears im receiving a call or a SMS on the screen
Update!!
Suddenly it started vibrating again this afternoon but now...it stopped again :|
It's driving me crazyyyyyyyy
Any ideas?
It started vibrating again...but now it has stopped
Update:
The phone started vibrating again today...but now it has stopped again :S:S:S
It's driving me crazy
Any ideas?
Thanks
mmm maybe could be the vibrator pice you should change it or .... i dont know
enjoy it
Mine didn't work when I received the phone from the person I bought it from. I opened the phone, spun it with my finger a few times and then put a little spray of WD-40. I let it dry overnight and put it back together. I got the phone in the beginning of March and its been working ever since.
BBowermaster care to share a schematics and opening instructions i have a similar problem
The link is in the Wiki
ftp://xda:[email protected]/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
Ok, i've got a serious problem on my hands.
I've just flashed my device with WM6.1, successfully. Ok, now i'm hard resetting the device after the 'successful install' and i've entered the bootlogger mode (i've done this before, not a n00b...) but after i've configured the settings (e.g. NO, YES, YES) I try and press the mail button, waiting for the white screen to appear but it doesn't. Instead, it does nothing at all. I can even change settings still! PLEASE HELP!
Thanks in Advance,
Timbo.
Oh, Thank God!
Oh, thank God! The mail button was just stuck .
Fiddled around with it, held it down for a while and the white screen finally showed up.
Thanks,
Timbo
Thread closed due to the problem solution.
Hi there,
I hope to find someone helping me to solve my "little big problem" :
when a call comes in, and my treo usually vibrates in interval, (i mean it vibrates, stops, and vibrates again) it keeps vibrating until i accept or decline it.
it is not a hardware issue, because it does vibrate with interval when receiving a new sms.
it cannot a slightly problem with the software, because the problem exists too, after a hard-reset is done.
the problem was solved ago, when changing the ringtone, but after it came back, no change in the preferences solved my problem, and i began to get frustrated...
the palm support told me to send my palm to their service center, but my palm is bought new at ebay, so i cannot verify the date i bought it...
i think, because the problem was solved once, it can get solved twice within software, but how?
maybe if i would reflash the windows mobile system... actually it is original, no flash was done on the device.
when reflashing it could solve my problem, it would be great, if someone could help me flashing it, because i never flashed a winmob device...
i would need a original untouched ROM, if possble too...
or does someone have another idea? please help me!
Quite a bit simpler than that. All you need to do is a hard reset.
Remeber to backup everything you want. I would suggest activesync, or if you have sprite backup, backup everyting except sysem settings (documents and contacts, appointments...)
Once it is all backed up, simply hold down the red button on the front. While holding the red button, use stylus to reset phone. Then it will say reset? Press up on d-pad and you will be set.
Nope, srry... like i allready wrote: "it cannot a slightly problem with the software, because the problem exists too, after a hard-reset is done."
i allready did a hard reset, and the problem is still there...
Any more Ideas?
Now, (20.04.) the Treo's LED does not light up, when connected to charger.
Sollution!
Okay, finally i got a sollution without reflashing the device!
The combination with HookMGR (nedded for next)
And VAlert 2.21 let me configure the vibrating problem...
So, it's running all fine now
Love Palm! Love Treo!
vAlert 2.21 Download Location
Do you have a download location for vAlert 2.21? I have a Treo Pro that I am trying to reconfigure the length of time it vibrates. It stays on continually when I receive a phone call and it is really loud in meetings.
Thanks.