First of all the correct unlock utility can be found on this post:
http://forum.xda-developers.com/viewtopic.php?t=33796
The next most important thing is to know how to do a hard reset, you hold the "Communication Manager" and "Voice Speed Dial" buttons while pressing in the soft reset button(that is the small button next to the IR port), make sure to keep holding the two buttons after you press the soft reset. Then a screen will apear to have you hit the green call button to make sure you want to reset. This will format your user info and make you peform the startup tests again.
If you want to load an english rom, I suggest the Qtek one since it is very easy and all the software runs on the computer instead of needing to load files on to a SD card or the wizard. The whole application can be found here:
http://www.beyondthetech.com/blogs/kjam/
The link to the file is at the bottom of the page in the last blog. You will need to have Active Sync 4.1 for this phone and it will have to be working for this application to work.
Have fun everyone and I think this forum is great.
Sorry, but I can't find anything on this pages.Does anybody have an English Rom of HTC Winrazd???I have a HTC winrazd but it's Germany.I needed an English Rom.Sorry for my bad English!!!!!!!!!!
hi all,
Am also looking for english rom for wizard..I would very much appreciate if any one can help.
Tks isse
English rom here
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html
i have an imate kjam & i was wondering...
what would be the best rom image for it? should i keep it on the imate rom or is there a better rom with better features for my kjam?
tx in advance.
Hi folks,
I made a "German Language Pack" (cab), which makes some german features available. See below
I am also working on a french version but I do nt have the french dictionary file for spell checking (mssp2_fr.lex) nor a french table for áà,... (sym.txt). If anyone could pm it to me I would be happy to update the language pack. Until then spell checking and symbols are as original only...
How-To:
1. download zip-file and unzip
2. copy cab-file to PPC
3. execute cab-file.
4. Softreset device
More information on the changes to registry and the included files are in the enclosed inf-file.
This tool was written for the Wizard device, but as the only Wizard-specific things are the settings for the hardkeyboard there shouldn't be any complications with other devices running WM5.
If anyone has suggestions for improving my little tool I would be pleased, if you could tell me!!
Hades.
new version with autocomplete feature added.
Still working on softkeyboard... - any suggestions?
hi hades,
does your little localizer work with the new aku2-roms? i have a himalaya aka xda2 with tofclock's 2.01a64wwe rom which is aku2. thanks for any info.
peter
i cannot report for any Himalaya images as using a Wizard (i-mate ROM 2.16). But the little tool does nothing system-critical. It only adds a view files and changes some registry settings, which are pointing to these files or concerning language settings. Therefore it should work with any WM5-device and -ROM, without interfering with any other abilities. I guess the settings concerning the hardkeyboard will just be ignored if the device does not have one.
For further information on all actions taken by the tool, please have a look at the enclosed inf file.
Hope that helped!
Hades.
transcriber doesn't work any more
I've just installed your french language pack on my Dopod with the latest Dopod rom 2.15.13.27 WWE and the transcriber doesn't work any more not in French neither in English. I get the message: Une erreur est survenue lors du chargement du moteur de reconnaissance de fichier.dll Vérifiez le chemin et la quantité de mémoire disponible.
I've followed your instructions and installed it successfully but I then got the message that the program was meant for an older version of WM and that maybe it would not work.
Is there a way to uninstall it without messing with the registry? My problem is worsened by the fact I can't manage a hard reset. I tried everything holding down the power button with the stylus in the small hole, sometimes also holding down the camera button at the same time, sometimes with the device turned on and sometimes turned off. No way, impossible to hard reset! Please help me, and thank you anyway for your work. I was very excited and I am now very disappointed.
yes it's a good idea
thanks
sorry 'bout that. I wasn't able to test the french language pack myself. I have overlooked the file and cannot imagine why it shouldn't work as it is similiar to the german one which is working quite well. Information on the changed registry settings are in the enclosed inf-file.
But anyway you should be able to uninstall it with the WM5 built-in uninstall feature (Settings --> System --> remove(?) programs). Perform a softreset thereafter by long pressing the standby-button (not digging the reset hole!)
To Hard reset your device you have to press and hold the comm and voicedial buttons simultanously, then press the reset button (small hole) with your pen, while still holding the other two buttons for a while, until finally you are questioned if you wan to completly delte your device. You have to confirm by pressing the green button. Make sure you have a bakup - I'd recommend SPB Backup.
Well, once again sorry.
Hades.
Thank you again for your kind answer. Actually I had to reflash my rom cause I couldn't do any hard reset. I was stupid not to think of removing the program first, since I didn't think it was a "regular" program. You mention the comm and voice dial buttons as two different buttons but actually on my Dopod it's only one button. Did you mean then the power and voice dial together, which coud make sense and which I didn't try cause nothing like it is mentioned in the user guide. Do you think I could have got the problem with your program because I used the stylus in the hole to soft reset my device after installing the french package. It is the procedure mentioned in the user guide for soft reset, contrary to what you tell me now. Thanks again
oh ok - I was assuming you have a HTC Wizard (don't know the dopod model number). If it's not a Wizard I have no idea how to hardreset it. But I hope you're using WM5, for my little utility is for WM5 only.
If you do a soft-reset after a change of the registry using the reset-hole the changed settings may not be stored on your device. That is because the registry-file is not immediatly updated after the changes, but stored in a temporary space and later (who knows when!) written to the file. So if you reset it by hardware-button the changes are still in the temporary space and therefore gone after the reset. If you do the reset by using software-reset function (provided by e.g. SPB Pocket+ or magicbutton) or simply switch off the device using the standby-button, the temporary space is written to disk before shutting down. That's it.
À bientôt,
Hades.
P.S.: I updated the language pack, cause I found a minor difference to the german one. (Compare inf-file) But I can't tell, that that was the problem.
My Dopod is a 818Pro with WM5, so it's a Prophet and practically the same as a Wizard, as I've seen in the forum. What you say about soft reset is very interesting since I haven't seen it discussed very often in this forum and i searched it quite thoroughly. Have you tried removing your program through the regular WM5 procedure? You seem to imply that the registry was not changed after my soft resetting with the hardware button, but it seems strange to me since after resetting I got the french warning I mentioned in my first post, and it was the first ever message in french from my english speaking device! Some change had definitely occured in the registry or somewhere else. Thanks again
well. I tried to remove and it worked. Concerning your registry I don't know wether it was changed or not. Depends on many things, I think.
Sorry,
Hades.
I've just installed the German package on my Himalaya device with English AKU 3.2. It works Thank you Hades!
hello Hades77
Actually i successfull changed hardware keyboard but also spellcheck, dictionnary (i think even T9 but i'm not using it) and special characters to french and it's compliant with 3.2 rom(thanks faria). As i can see you package does not include those feature yet ... Are you interrested in getting those files and including them into you cab ?
thanks a lot!
Hello hedes,
i just installed your german cab! it seems to work perfect on my phone.
THANK YOU VERY MUCH FOR THIS, IT MAKES LIFE EAYSIER WITH WRITING WITH AN ENGLISH ROM
Hi,
Is there an spanish version for TyTN?.
Regards,
Taguapire.
Hi , i was wondering if there is way (something like a tutorial) that I can build my own language pack?
I have a Wizzard (Qtek 9100) with the original QTEK rom (in Greek) and I am trying to fit Faria's 3.2 ROM in my PPC but i Need Greek Language pack . Is there any way you can help me with that?
thanks in advance
new ROM
I tried to install your german language cab, but it doesn´t work. I got the new ROM from Faria ( http://forum.xda-developers.com/forumdisplay.php?f=259).
Now i donn´t know how to go on.....
Thanks for help
Hi all,
I flashed my swedish qtek 9100 with the latest ROM which worked like a charm, but when I installed the swedish keyboard fix from the ftp server to get my ÅÄÖ's back all buttons (including the keyboard) died. The only one that works is the powerbutton.
Is there anyone who knows if there is an easy way to get them to work again? I would rather not do a hard reset as I have a ton of programs installed on it.
regards.
Don't know if you can get it back without hard reset...
try uninstalling the thing you installed (guess its that old cab file that doesnt work with newer roms..)?
to get swedish characters on the keyboard, look here:
http://forum.xda-developers.com/viewtopic.php?t=42871&highlight=
Thanks for the link.
Guess its time for yet another hard reset.
Hi there,
is there any way to skip the touchscreen adjustment (cause it runs eternally & without result) after a hard reset?
I tried ...
1) ...to read everything posted here
2) ... the "press center button + calender button"
3) ...the camera-button + on/off-switch + reset button (which led me to a basic screen with "v1.02" (but since i use a Mac nowhere else)
Once I get to a running system I might be able to update the Software-Version, but since I get nowhere else but "Touchscreen"
Thanks in advance for any suggestion!
also need a way to do that, maybe with some registry tweaks or so .. but cant connect to my mda vario when it is in adjust mode .. any1 can hlp? would be appreciated!
ty, brot
hi there! my english is not good as is could be
I got following problem:
I ve wanted to back up my wifi settings (HD2) including the keys (wep/WPA etc.)
I ve searched and found a tool wich makes a backup of the settings without the keys! The keys valve is ******** and not the key itself.
So the tool dosent work for me.
Is it possible to back up the settings including the keys???
or where are the keys stored? (found no reg keys)
Please help
Try Wifi Hero
It doesn't solve the problem
It asks for the keys at first start to write them in its own database!
But i need to get the keys that already have been stored on my device!
anybody knows where the keys are stored or how to get them out of my/any device??? (Reg or something else)