hi everyone, i had recenetly hard reseted my Xda Exec by accident, after that i couldn't sync with my activesync 4.1, i had delete my old relateionship plus installed activesync 4.2, but it still not working!!! the phone and pc can detect each other, but they just don't sync, both screen apperaed "syncing" and stay there for an hour. what should i do now??? i don't to type in all the number one by one again!!!
hi
I get the exact same thig here, but ave narrowed the problem down.
If I use Tweaks2k and have GPRS ALWAYS ON set to on, then I can't activesync at all, either cable or bluetooth, it just sits there looking for changes.
If I toggle GRPS ALWAYS ON to off, then it works fine.
Anyone else noticed this, or is it a known issue?
FYI, I have a o2 Exec with latest O2 ROM and am using push email
Merlin
Hi,
I have a really weird issue. I'm really flabbergasted about this one, I think this is a tricky one.
But maybe some can help me out.
I've got a Qtek 9100 with the latest official firmware (2.18.7.6 NLD) so a dutch version.
I use a company SIM card wich has GPRS disabled so I have to use WIFI for internet.
Everything goes well (both browsing as well as email).
But then when I sync my agenda/contacts (none of the other items) with active sync (I tried 4.1 and 4.2) then email doesn't work anymore but WIFI is fine: I still have an IP and I can browse.
The error I get is that the device cannot set up a connection and wants me te set up a modem connection profile (wich I don't have since I only am allowed to use wifi).
Again this error is reported by the emailclient (tmail.exe) but IE works fine!
So somehow after a sync-action with active sync the email client wants to use a GPRS/CSD connection to read mail. I never told it to do so!
I tried the following to solve this issue but with no result:
- I used Memmaid and Check Notifications to find any problems but that was ok.
- I deleted all profiles in active sync (both on the PC as well as on the Qtek).
- I disabled the phone functionality (I hope the phone would understand not to use GPRS/CSD)/
- I tried a soft-reset
The only way to solve this is by a hard reset, but then I have to sync again and I'm back at the beginning of my problem.
Can anyone help me please! I'm desperate.
THanks in advance
Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris
for the third time now i have noticed that the data conection has been turned on early hours of the morning.
looked in task manager to see wot was running and the only thing was active syc have looked at was of tuning of active sync or settings for but can not find any way around this.
any one with ideas about this.
many thanks
nobody know then why this happens
Activesync has a way of starting itself. You should have your Activesync set to Manual for retrieving your email. That might help.
Hello,
As I have always done in my previous HTC models (Touch, Diamond, HD), I have set up the registry key HKLM/Drivers/BuiltIn/RIL/EnableDeactivatePDP to 1.
This allows to automatically turn data connection off when the phone enters into standby mode.
The problem is that, with my HD2, the connection goes off correctly but activesync is unable to automatically synchronize with the exchange server while the screen is off.
I have tried different ROMS and different radios. All with the same issue.
It always worked with my previous HTCs.
Has anybody a solution to this issue?
Thanks!
Carlos
No idea bro, I dont sync with exchange so i wouldn't know, anyways, I did not knew that registry key, is great!, thanks for the info, try asking under general>networking forums... they may help a little bit more.