Pls help. It drive me nut.
I'm at home connect to (WI-FI) when i connect to internet the GPRS connection was active also. If i disconnect the GPRS the WI-FI still active but when i switch the web site page the GPRS re-connect back again.
How this happen??? only want use connection one of a time. If wifi available then GPRS inactive and otherway around if wifi inactive then GPRS active.
I have no proof of this, so it's just an assumption. I believe that the GPRS connection may be live but not actually in use. Both icons show up when I use WIFI too. I wouldn't pay too much attention to it. If you don't have a data package and want to avoid ever connection to GPRS or even temporarily block it, you can go under connections, connections, advanced, and set both to my work network. If you want to use it again, then set the second one to medianet or whatever your GPRS profile is named.
Related
Hi,
Got my Jasjar today and very happy with it. I am in and out of a LOT of Wifi zones daily so was wondering if there is a way, when WiFi and GPRS are both on and im in a WiFi area all net connections use WiFi not GPRS/3G if both are active.
I did a test and it seemed my messenger program was still using the GPRS connection when on the WiFi Network.
Cheers
Stot
I need to get a proper answer - but I have discovered this.
I walked home from work the other day on MSN using 3G.
I arrived home, and the unit picked up my WiFi signal and connected.
I then dropped the phone (radio) link using the control panel.
The MSN connection remained active, and I remained on WiFi even when bringing up the phone radio again. WiFi was definately being used in this instance.
I wasn't able to tell whether or not this would work WITHOUT turning the phone part off and back on again.
Yeah that is whats happening here. I put on GPRS monnitor and set it to watch the GPRS connection only and hit my WiFi spot, even when wifi was connected it was still using the GPRS to send/recieve internet data. If I then turn off GPRS the it carrys on as if nothing had happened on Wifi.
With the cost of mobile Data these days it really should always default to a connected WiFi connection if its available and not the GPRS/3G connection.
I suppose a utility that disconnected GPRS when a WiFi connection becomes active would effectively do this as once you are out of the WiFi spot GPRS would be initiated to make connection.
Cheers
Stot
How do you select what network connection to use? 99% of the time I only ever want the phone to connect to the internet over Wifi (or bluetooth/cable connection to the computer) and not using Cingular's network. There is the occasional time that I would like to enable that but most of the time I want to only use the Wifi. Where can I set so it doesn't connect to Cingular accidentally (say if I'm out of Wifi range or hit the wrong button) so i don't get large data charges?
Thanks
In connexion option set default internet connexion as "my work network" and privat network default as "my work network" as well.
So lemme just confirm something - unless I configure server settings on the a HTC TyTN (using stock rom) on the Cingular network - it will not be able to use Cingulars network right? The only time I will be able to access the internet with the phone is over wifi, bluetooth connection (or USB) with an internet enabled computer. Otherwise the internet will not function and I will not be charged data charges correct?
I don't really ever find myself using the internet on a phone when I'm away from home so I can't justify the expense of the data service but I work on a few websites that I'd like to look good on a cellphone so that's my main reason for wanting internet access on it - so while I'm at work I can log into the wifi system and test the site while I'm tweaking the code.
Am I correct in assuming that I shouldn't be charged under this situation?
Hi, I'm on Vodafone and I made the changes fun_key posted without noting down the original settings. Please can someone tell me what the default settings are for internet connection and private network connection. Thanks
Hi is there anyway of switching GPRS Off wuithout turning the phone off?
I want to be ablt to use wireless at home however it constantly switches to GPRS - driving me mad. I have a 1gb allowance on my GPRS but i use that for my pushmail for office mails.
I would like to be able to surf at home usig WIFI, when doing this is there a setting (not connection manager) that can turn GPRS off when i am using WIFI?
If you set your WiFi connection as connected to the Internet instead of Work, and in the network adapters setting (settings, connections, network cards, network adapters tab) set that your network card connects to the internet, once you establish an internet connection with WiFi, it should kick your GPRS connection off. On my phone GPRS still tries to connect once in a while for some reason, but never does, since the WiFi internet connection just keeps kicking it off.
abc123MDA said:
Hi is there anyway of switching GPRS Off wuithout turning the phone off?
I want to be ablt to use wireless at home however it constantly switches to GPRS - driving me mad. I have a 1gb allowance on my GPRS but i use that for my pushmail for office mails.
I would like to be able to surf at home usig WIFI, when doing this is there a setting (not connection manager) that can turn GPRS off when i am using WIFI?
Click to expand...
Click to collapse
rassah's method is more professional than mine and better perhaps. I'm lazy so I just go to connections button below on/off button and then tap off the GPRS via button that looks like a PDA with two arrows. If GPRS tries to reconnect there should be a popup if you have wifi on that allows you to cancel it's reconnection. This does not disable the phone.
Mike
thanks - i will try this - do you know if this will affect the dirct push mail?
Just thought this may help, found it on Modaco.. Works a treat, just toggles gprs data on and off... Very easy and works
Not sure how OK it is to post links to other forums but as it is free software I guess I should be OK...
http://www.modaco.com/New-FREE-Utility-t246171.html
Phil
superb application - especially usefull when roaming
Just what I needed, going overseas next month, I don't want to use any data while there.
I configured my private wireless network, and the needed configuration for my cellular carrier web connection.
The issue is that whenever I am trying to surf to any webpage using my wireless LAN, my trinity always trying to connect to the cellular network, without using the available wireless connection. If I'm trying to cancel the conection process, it stopped but I can't surf anywhere.
Any ideas how to force the trinity to use the wireless network when available?
Thanks,
Amir.
In your connections configuration, create a new connection and do not add any entries to the Modem Section. Just configure the Proxy setting according to your ISP requirements. You have to change the connections configuration ach time you want a different connection to the internet. This you can do easily by creating different connctions for different situations.
Regards,
Randy
It sounds as if your connection to the WLAN Router isn't being recognised.
1st thing to try is to go into the WLAn control panel, and in the Power tab, make sure the slider is fully to the left for max performance.
In the Network Cards CP, see if your router is listed, and whether Available or Unavailable.
Recheck the security settings- are you using WEP or WPA? Does your router have any Range Extender features- if so, turn them off.
Once you have a valid WLAN connection, the PPC will use that in preference to the GPRS, as long as you have WLAN conneced before opening PIE, and as long as there is no current GPRS activity when you open PIE (I find that if my Exchange Server is connecting via GPRS, then WLAN won't connect till the data session has completed)
For a quick way to force GPRS off, then on as needed, look for a great free app called Bandswitch. This allows you to force the P3600 to use GSM or 3G if needed to conserve power, and also to quickly enable/disable the various GPRS connections.
Hello,
I need some help about my htc hd.
I want to ensure that, then i connected to internet via WIFI, my GPRS (3g) is not connected.
How can i disable the 3g GPRS connection, and enable WIFI only
Thanks a lot!!!
No Data will allow you to stop data connection.
so now if i closed my Orange network, the WIFI should work?
It is still doesnt work, do you have any idea how to configure it?
ygrunin said:
so now if i closed my Orange network, the WIFI should work?
It is still doesnt work, do you have any idea how to configure it?
Click to expand...
Click to collapse
Course it will there seperate
All you do is block Orange connection when you want and unblock when needed
This program doesn't help me , because even i close it the GPRS still work.
But than i take the SIM from the phone, or turn off the phone feature, the internet connection is unavailable.
I think that all problem that was in some topics about the WIFI speed , is because of they used the GPRS internet and not the WIFI.
So , there some more complexive problem with internet WIFI in HTC HD.
Just try to take out the SIM and than surf in internet with WIFI? There is no way!!!!!
the connection icons on the top of the screen clearly show which data connection is active
the manual describe the meaning of all the top screen icons
settings->connections->connections->advanced-select network
pick my home network or whatever the non isp connection is named on your phone
and all data connections when there is no wifi or activesync connections to get free network from will fail with an error == you will never get a grps connection again
before you turn it back to my isp or what it's named on your device