Hi All,
I am new to the PDA world and have an O2 XDA Exec, I would really like to find a way for it set the phone to vibrate or simply set the sound off altogether whenever an appointment in the standard WM5 calendar is taking place.
I would also like it to automatically restore my phone back to its original sound setting when the meeting has finished.
Is there a way or a program that can do this?
Thanks,
Kingers
Never mind, PocketZenPhone did it for me.
Hi,
I agree, PocketZenPhone is the best for that... PhoneAlarm can also do that but is louder in memory usage..;with some interesting functions. But I prefers PzP because of bluetooth auto activation on incoming call...better battery lifetime...
Related
Has anyone this great app?
http://geocities.com/myppcpe2003/index.htm
Maybe a key for it?
I'D like to use it :twisted:
It appears to be the best prog that I've looked for to switch my XDA2 to a changeable caller profile phone like a nokia!
I liked this app initially, great interface and lots of functionality, however I found a few problems:
Sometimes after changing profiles the ring would be silent when it should be heard - the dialog would pop up showing the caller, but no sound.
You can set it to automatically revert to the normal profile after <n> minutes, or at a certain time. For me this only happened when the XDA was on - thus if it should have switched profile and then a call comes in before you have switched on the device it still uses the wrong profile.
If these problems can be sorted it would be a great app.
As for a key... go to PocketGear and but it!
Yeahh..So It's not a perfect software again.
Do you know any program that analyze the caller from the contacts and you can select for example just one number or one goup to receive? The other ignored or silent like Nokia phones.
I have come across MUTX RingToneX which allows you to set ring tones by contact or category so this may well give you what you want. Can't tell you how good it is, but you can get a free trial from the link below:
http://www.pocketgear.com/software_detail.asp?id=8675
Thx for the answer but I'm looking for an app with easy switching between sound profiles.
For example:
A) MODE
Every unknown number has RINGTONE1
FAMILY group has RINGTONE2
FRIENDS group has RINGTONE3
MY CARALARM SYSTEM (has a mobile calling function) has RINGTONE4
...etc.
B) MODE
Every unknown number is silent or ignored
Every other group than MY CARALARM SYSTEM is silent or ignored
MY CARALARM SYSTEM is ringing and answered (at night while I'm sleeping I want to receive just the call from my car's alarm system)
It's just a simple thing that a lot of phone's using. (Nokia & others)
I hope somebody understands my problem and knows an apllication with the ability I wrote above.
Thx
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Tekflow said:
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Click to expand...
Click to collapse
THanx the answer but I'm sure (not think) that I don't need the combination you wrote because My phone profile can switch just sound profiles with setting the ring volume or vibrating, IA caller ID can add a picture to a call, Caller2picture can add a ringtone and a picture to a call.
But I need what I wrote upper, please read it perfectly, because it is something different.
I need a software that has the ability to verify a caller-group and for example you can reject all number/call except the caller-group you set like with Nokia phones.
ANYBODY DOES UNDERSTAND WHAT I WANT???????
Maybe because I'm from Hungary and my english is not so well..... :?
My Phone Profile 3.1
My Phone Profile 3.1Full
Reg Code: TMPP-1177-JGUI
Have a fun!
If you have an XDA II, you don't need to get the IA Caller ID because it's already on the XDA II. IA Caller ID is called Photo Contacts in the XDA II.
Caller2picture can add a ring tone to a group. Whenever you want to reject a specific group, give it a silent ring tone.
@VHS: bad boy... i don't think that this should be made public... software worth using is worth bying.
hehe ...bad not bad, but apart from that a/m ...
discussion has been pretty much interesting to me as to sound profiles etc, I have been also looking for some time for software allowing for easen phone handling
regards and Happy New Year,
monika
Finger Clix
Check this:
http://www.imaginet-software.com/index.aspx?p=fingerclix_en
It is the best phone dialer ever!
thank you
I wolud give it a try
regards,
monika
:? :x :evil:
So..Nobody understands what I want.
OK.
Tekflow:
Thanx, but I know that I can set a silent ringtone for a group with one of these softwares. But I NEED SOMETHING DIFFERENT:
I have a car within a mobile-phone-alarm-system. If somebody does something with my car, this mobile (in my car) calls my mobile phone which is with me. So, usually (always) I switch off my phone by night. But if I switched off my phone I would never know my car's calling. That's why when I had a Nokia7650 I can set a profile called Night-profile which has the settings with all calls + all groups has a silent ringtone and my Car-alarm-number has a loud-sirene-ring. That caused when somebody called me except my car my phone was silent. When my car called it ringed with the highest level. And if somebody wanted to stole my car I had heard it. But not now. Because I don't want everybody to call me from 6 a.m., that's why I switch off my phone, but if I switch off my phone I can't hear if my car's calling me.
That's what I can't set in my XDA2.
With no any of your suggested programs.
I know all of them, and I know none of them has the ability I wrote upper.
SO........SOMEBODY UNDERSTANDS WHAT I WANT TO SAY SINCE DEC.05.???????????????????????????????????????????????????????
p.s.:I think so that FingerClix is the best dialling program for the XDA (I use it), but I need another thing, not just for dialling or to give a ring volume for all numbers and groups. My phone profiles can set just a general volume and vibrate settings without any choice to give a different volume for just one group or one phone number like Nokia.
(Maybe since dec.5 there's an update for MyPhoneProfiles or for the others and they have expandable ability?)
I (hopefully) understand what you talking about (have had a Nokia for years...), but i'm not aware of such a tool at this time for the MDA/XDA.
regards,
If I understand you: you need a program that gives you the opportunity of turning off the sound of the telephone for all incoming calls except one number or one group of numbers, or, better, to make call barring for all calls except for one number or one group of numbers (some kind of filtering). I also don't know if this kind of program is available for the Pocket PC Phone. Anyone on the forum aware of this ?
anybody has version 5?
I think what Tuningszocske want is something like Blacklist in Nokia Symbina phones. I know of a Chinese program call CallerFirewall, it allows one to add contacts to black or white list, you can choose to block all contact in black list, receive call only from white list or block all incoming calls etc. This program is compatible with dopod686、O2XDA、T-Mobile、and LegendT108.
Hi,
I noticed when I had the O2 UI set up (following a standard hard reset and choosing home user) there was an applet called Profiles. I have since hard reset again and chosen corporate and no longer have the side or bottom tabs on the today page, but notice that there doesn't seem to be a profile manager or profile app, does anyone know of any software you can use to have different profiles?
The reason I want it is so that I can set up a profile for use in the car whereby all calls are automatically set to speaker phone when I answer them, is this possible too?
Cheers
You should try phone alarm by pocketmax. It does exactly what you want!
thanks, I'll give it a try
Hi there,
Does anyone know of phone profile functionality on the Hermes or thrid party software? Eg Normal, Outdoors, Meeting Silent. My previous smartphone had this functionality and it was even intregrated with my calander so when I was in a meeting it would automatically change the profile to Meeting and back to normal afterwards.
Thanks
PhoneAlarm will change the profiles according to your meeting schedule in pocket outlook. In addition it provides much more functionality to your phone. For trial version see their website www.pocketmax.net
Hope you find this useful
Thanks.
Looks preety good can it also change the connection settings when WLAN is turned on or off?
ozziede said:
Thanks.
Looks preety good can it also change the connection settings when WLAN is turned on or off?
Click to expand...
Click to collapse
yes, it can do this based on profile and also by (location) cell tower
Ok... I admit, I love VC! I have 1.6 installed on my 8525 with the blue tooth "hack" working and also mapped to my PTT "click & hold". It works great. Reminds me of my old MPX220, only much much better. However, as with anything, there is room for improvement.
1) PTT button as an actual Voice Command button, where Click launches and Click & Hold cancels.
2) Voice Command reads Notifications, battery level, signal strength. Why not read entire Emails? or IE, Word, & Notes? Like MS Narrator, only on my PPC and initiated by VC. It seems like the underpinnings of turning VC into a screen reader is there. What will it take to implement this? (especially email... I want to say "What are my new email messages?")
3) Anybody else have ideas or gripes?
nickshertzer said:
2) Voice Command reads Notifications, battery level, signal strength. Why not read entire Emails? or IE, Word, & Notes? Like MS Narrator, only on my PPC and initiated by VC. It seems like the underpinnings of turning VC into a screen reader is there. What will it take to implement this? (especially email... I want to say "What are my new email messages?")
Click to expand...
Click to collapse
I had read that it could do this for emails but not for SMS messages.. It doesnt actually do it for either though which did annoy me.
It also will announce the incoming caller's name over and over again if you have a second call arrive when you are already on a call.. this is very very very annoying and needs sorting.
I wish it wouldn't turn off the Microphone AGC on a soft reset. They recommend enabling it, yet when it loads it disables it...nutty
AGC On
Zedcorrado actually the instruction tells you to set AGC off not on, so it is OK for it be off. Following is part of the installation instructions.
1 - Adjust the Microphone
To get better speech recognition (If this control panel is not present, skip this step):
1. Tap Start > Settings > System. Then tap Microphone (or Microphone AGC or iPAQ Audio).
2. Set the automatic gain control (AGC) to OFF or disabled (if available).
3. Set microphone gain (if available):
Does VC 1.6 and the 8525 patch send audio to the headset when the information for an incoming phone call is announced?
Hi,
ist there any piece of software that can turn on the LED when a message has arrived? I looked at a few other forums and it seem there is no such software, or am I misstaking?
Regards,
J
I've looked also and so far haven't found anything that works.
This would be an excellent bit of functionality if it could be done.
http://discussion.treocentral.com/showthread.php?t=167288&highlight=treo+alert
If I understand what you are describing, it seems that this would fit the bill...
it says........."- Preliminary support for the Treo Pro..........What is Treo Alert you ask? Here are some of the features:
- Highly configurable program that adds reminders and alerts for various system events such as pending Voice Mail, Missed Calls, SMS, Email and other reminders such as Calendar reminders and Alarms.
- Can be configured to blink led when any of the above listed events occur.
- Can be configured to vibrate when any of the above listed events occur.
- Multi-color/blink rate LED settings......."
naturekid said:
Hi,
ist there any piece of software that can turn on the LED when a message has arrived? I looked at a few other forums and it seem there is no such software, or am I misstaking?
Regards,
J
Click to expand...
Click to collapse
So far the only one I know that really supports this for the Treo Pro is phoneAlarm. I've been helping the developer test the beta for his next release and it does get the beacon light now to light up with whatever alarm notifications you've set up.
It's actually a really amazing program and does way more than its name suggests:
http://www.pocketmax.net/
But also, there's a quick n dirty Mortscript now which Scottymomo's written which will trigger the beacon light based off registry states:
http://discussion.treocentral.com/showthread.php?t=174039
.
If led works as in Treo 750v, yes, it's doable, but with 3rd party apps. I did it my self an app to do it on Treo 750.
Still no good working App... Not even phone Alarm....
And no good call recorder app
wx710 said:
And no good call recorder app
Click to expand...
Click to collapse
wrong
Vito AudioNotes!
I've tried this app. Actually if I get an incoming call, Vito AudioNotes will just record my voice and ignore the voice from the other side.