Related
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
I bought Spb Backup a couple of days ago and have just had a major problem with no option but to hard reset.
Spb Backup... wow!
It put me right back to where I was before, applications, Registry hacks all my vga settings.. the lot! its like I never even did a hard reset!
The backup file was stored on the SD card and its an excutable, you just run it, correct the clock and hey presto jobs a goodun! 8)
oh and activesync didnt see any difference!
Did you notice any duplication of application icons, something I notice in another backup application?
That's true. Nice program and cheaper than Sprite backup......
cktlcmd said:
Did you notice any duplication of application icons, something I notice in another backup application?
Click to expand...
Click to collapse
Nope didn't notice any duplication, not found any ill affects and like previously said its cheap
dherrero said:
That's true. Nice program and cheaper than Sprite backup......
Click to expand...
Click to collapse
Ya, also Spb seems to have much better compression than Sprite.. AND Spb leaves you with an exe thats self installable
One more question please. Can I store and run SPB Backup application from my SD Card?
cktlcmd said:
One more question please. Can I store and run SPB Backup application from my SD Card?
Click to expand...
Click to collapse
Haven't tried that, I don't see why not. The only problem that you might have is if you have scheduled backups setup.. because the app needs to wake the system and the SD card may not be ready quick enough. I have mine installed in the extended ROM.
Download the trial and give it a shot
How do you install it to extended ROM?
One problem I found with SPB Backup, whilst backing up, it hangs at midpoint and then finally finishes but with an error message stating that file 'history.txt' wasnt backed up. Happens everytime. Any idea why?
Thanks. Cheers
I have been trialling this in Beta for a month or so. Even the beta's were good.
However, I do recommend anybody that is considering using it after a failure or error, to hard reset the device prior to the restore, otherwise it overrides and adds to what is already there, so if there are extra files and extra registry entries, they will remain.
The originals will all be restored correctly though, so you are unlikely to detect a problem.
I have restored, and hard reset on many occassions throughout the beta, and it works a dream.
Is it possible to backup, upgrade to a new complete ROM and then restore?
Or when you upgrade to a new rom you cannot use older ROMs backup?
Thank you.
I dont believe you can restore over an upgraded rom.
primarily cause the rom files are not copied. my entire backup, compressed 11mb.
you probably could, and when we were fiddling with WM2003SE for the himalaya model, we used this peculiar feature to do that.
YOu might try it and see, but some of the system files, dlls and hidden files may get modified some how, dont know enough about it. depends on the size and extent of the upgrade, it will probably work, but maybe a little unstable.
Either way, its not recommended. What I do is a fresh rebuild without syncing, with all my registrations, connections, and website usernames and all customisations done, and then call it a "virgin" backup, so that it can always be a perfect starting point for a base machine on a new ROM. This is then kept for te life of that ROM incase I want to go back to a nice clean environment without to much effort.
Hi does anyone know if this will backup txt messages to
cktlcmd said:
One more question please. Can I store and run SPB Backup application from my SD Card?
Click to expand...
Click to collapse
yes, you cand. I did it
simon_darley said:
I have been trialling this in Beta for a month or so. Even the beta's were good.
However, I do recommend anybody that is considering using it after a failure or error, to hard reset the device prior to the restore, otherwise it overrides and adds to what is already there, so if there are extra files and extra registry entries, they will remain.
The originals will all be restored correctly though, so you are unlikely to detect a problem.
I have restored, and hard reset on many occassions throughout the beta, and it works a dream.
Click to expand...
Click to collapse
You shouldnt, bacause you need to restore the registry to make your apps working again but in the new ROM the registry structure or data may (and normally do) change, so you would corrupt the new rom
scotjen1 said:
Hi does anyone know if this will backup txt messages to
Click to expand...
Click to collapse
Yep, it backs up all your text messages and your emails
Thanks vbjoe am installing now.
Problems on my JASJAR
First of all it duplicates Alarm notifications on my JASJAR. Secondly if you hard reset the device and then restore the backup, it always hangs at almost 100%. Had to cancel the restore and restart the device. But once restarted, it looks like everything is restored despite that restore hangup. But i am not certain, might be some problem in restoring with i come across later in future.
Can't depend on it.
Backup program
Try Sunnysoft backup manager.
http://www.sunnysoft.cz/en_clanek.php?clanekid=51
hangs happened to me, i left it on its own and it did finish restore on my wizard
Hi,
I needed some help,
The reminder on my Wizard quite working since yesterday, NO SOUND NO VIBRATE, NO LIGHTS...etc
Can someone please help???
Thanks
cifp48
No tips yet???
Had the same problem. Sorry, couldn't solve it. Did a hard reset and now it works fine again. But of course that's not ideal...
Thanks for the reply.
did U backup your data before doing a hard reset??? How did U backup??
Thanks
Sprite Backup
I first made a backup with SPB backup. Then I only restored the contacts, not the programs (I tried that first, but then I ended up with the same problem). Obviously some program caused the reminders to stop, but I still haven't figured out which one.
One small good thing: after a hard reset and all programms installed again your device is markedly faster (for a while). Also an opportunity to upgrade the rom?
Thanks.
What ROM do U recommend?? what are the changes?? WHats the latest ROM????
gees, thats lots of Qs in 1!!!
I had same problem, but successfully solved it.
1. Clear all "calendar.exe" events in a notificatation queue with MemMaid.
2. Drop all events in a calendar folder of Outlook on desktop PC.
3. Sync with Wizard, disconnect.
4. Restore events from "deleted" folder.
5. Sync again.
Good to see that it can be solved. Hope I can find it back when it happens again.
About a new ROM: CID and SIM unlock your device and download one of the latest Qtek or Imate roms. Go to the wizard upgrading forum, or type keywords like 'rom and upgrade' in the search function of the forum on top of this webpage. The you'll get more than enough tips and tricks.
Good luck!
hi,
i'm having an odd problem. i am unable to do many things
1) sync with activesync. i can explore and transfer files to and from the device, but only as a guest, i cannot truly sync.
2) remove programs - the list is empty and i cannot remove anything
3) nothing new will install. when i send a cab over, and i try to install it, it will tell me that the installation was unsuccessful.
i belive this all started when an installation over activesync (tomtom) failed, though i am not sure.
i have rebooted my computer, uninstalled and reinstalled activesync, soft-resetted my 8125, tried serial/rndis. nothing seems to work.
the pda is usable right now, from what i can tell. the programs that are already on there work fine. its syncing that is all messed up.
thanks for any help you can give.
and i have managed to fix it, in a fashion
1) make a full backup (except for the sd card) with sprite backup. (i made this backup while i was having these problems)
2) hard reset, let ext rom run
3) restore from backup
everything seems to work, so i can say that i'm happy with it
norelidd, I had your exact same problem last night. Active sync was uploading a CAB file onto the device and I pressed cancelled. No big deal I thought because it cancelled during the uploading process. When I tried to sync it later, nothing worked except for the "explore" files option. I wasn't able to sync, remove, install or even change my today theme. The device itself still functioned normally, made calls normally and got on Cingular's EDGE fine. Just wouldn't sync or install/remove or change the today theme.
I performed several soft resets, deleted any files files on the device created within the last hour of my previous sync incase anything was corrupted, nothing worked. Only solution, I finally bit the bullet and did a hard reset. :x Reinstalled everything and it works fine after the hard reset. :wink:
my mini s wont install cab files from the file explorer. you see, ive recently been admitted to hospital (dislocated hip from a rugby tackle, 4 weeks on traction ) and thought i'd download some games to play. but ive tryed downloading loads of different cab files, as obviously i dont have access to my pc, but when i click on them, nothing happens. any ideas??
This has happened to me twice
I am having the same problem. I thought it was an activesync problem but the first time it happened I was installing .cab files and there was a problem with the install. I had to fix the problem with a hard reset.
My problem now is that I just loaded a whole bunch of programs and I was looking for a good back up program but I do NOT have one on my 8125 yet. How can I back up my programs (or can I) if I must do a hard reset. Is there any way of fixing this problem without doing a hard reset?
Please help!
Thanks.
Still looking for help...
I am really trying to avoid a hard reset. Can anyone help us with this problem? I am thinking it may have been caused by installing programs designed for PPC 2003 and not WM5. But who really knows with microsoft.
Thanks!
Hi!
I'm having the same problem!
The thing is, I CAN'T make a hard reset because I don't have Sprite Bckup installed on PDA and I simply can't installit now! I don't have backup of my PIM data...
Can you help me???
Thanks,
Deiota
Deiota said:
Hi!
I'm having the same problem!
The thing is, I CAN'T make a hard reset because I don't have Sprite Bckup installed on PDA and I simply can't installit now! I don't have backup of my PIM data...
Can you help me???
Thanks,
Deiota
Click to expand...
Click to collapse
Hi again!
Just did the hard reset, but I found out a way to backup my PIM data.
Just copied the PIM.vol file that is on the root of the PDA and then, after the hard reset, restored the file. Done!
Best regards,
Deiota
I'll try it - thanks!
I did the hard reset and everything (except syncing through the exchange server is working). I will copy the file over. I am going to install the backup program first. It seems that my problems came from installing third party programs to the minisd card.
ARrrrrrrrrrrrr I have the same problem, canceled an install from activesync during the file upload...
I still don't see why this would cause an issue because the file had not started the install yet but obviously it has done somthing that I don't know how to fix... does any one know what the device does on a WM5 system when an app tries to get installed? is there a way to reset what ever it has changed?
Many thanks
JFC
This is the exact same problem, as I described here:
http://forum.xda-developers.com/viewtopic.php?t=57461
It is a problem with policies getting screwed up all by themselves.
I just had to do a hard reset and as I didn't have enough permissions neither a backup app, I've lost ALL my data.
I hope I won't have the same problem in the future.
Same problem for me last week. I obviously had to hard reset...
Same problem for me last week. I obviously had to hard reset...
Get yourself a registry editor and make sure that your Policies (on HKLM\Security\Policies\Policies\ ) are exactly like these:
http://forum.xda-developers.com/download.php?id=13422
This is probably the only thing that can prevent us from a hard reset.
I had the same problem on my HTC Mogul (Titan, Sprint PPC-6800).
1.) Before I started, I made a backup with SPB Backup, after I had my problems, but before importing a clean policies registry from another Mogul.
2.) I imported the file, but that didn't seem to help, so I thought maybe there might be some new policies that weren't there before, so I was going to rename the old policies tree, and then re-import the file. BAD IDEA. As soon as I renamed the tree, Windows Mobile kicked me out and required me to set a device password. It wouldn't run any applications or communicate with Activesync saying I didn't have enough permission. Nor could I re-run Resco Registry Editor.
3.) Someone else here said that he made a Sprite backup after the problems, did a hardware reset then restored, and it solved his problems. That didn't make sense to me, but I did have that newly created SPB Backup image, and my PDA at this point was pretty useless. So I hard reset and restored the image of my device and all the problems are now gone! I don't understand why, but I'm glad it's working.
Conclusion:
If I didn't have backup software already preloaded I would have been screwed, because when my PDA got initially messed up one of the symptoms was that I couldn't install any new applications. I should do backups more often, but the fact that it takes 20+ minutes makes it a unfun process.
Hi everyone, I have a problem restoring my Vogue from the exe back up created with Spb Back up.
Here is the situation:
after a hard reset I restored my PPC from the back up file. Seamed like everything was fine until it rebooted (did it twice.. ??) and after it restarted the second time I noticed I could not use the phone function (could not bring up the phone screen from the hardware button or from start-phone) and I could not use the internet...no connection.
Also some programs like..ContactManager are not running properly.
did the restore couple of times same result.
any suggestions please ?
I tried taking the storage card out while doing the restore...still no luck.
maybe I should do a customized restore and uncheck some system items ?
can anyone help please ?
PS: if I just hard reset the phone to factory settings everything works fine, so the problem is clearly somewhere in the backup file.
PLESTIUC said:
Hi everyone, I have a problem restoring my Vogue from the exe back up created with Spb Back up.
Here is the situation:
after a hard reset I restored my PPC from the back up file. Seamed like everything was fine until it rebooted (did it twice.. ??) and after it restarted the second time I noticed I could not use the phone function (could not bring up the phone screen from the hardware button or from start-phone) and I could not use the internet...no connection.
Also some programs like..ContactManager are not running properly.
did the restore couple of time same result.
any suggestions please ?
I tried taking the storage card out while doing the restore...still no luck.
maybe I should do a customized restore and unchecked some system items ?
anyone please ?
Click to expand...
Click to collapse
Are you running any apps off the storage card? Or is an app pulling something from the storage card? I had recently done a full backup but my backup file is stored on the card and I have not run into any problems so far. Also have you tried restoring from a older backup file? I have mine set to the default keep 3.
update
well, I tried a customized restore and I unchecked "emals"...so it looks like that solved the problem. can use the phone and the internet just fine now.
everything seams fine as of yet
will let you know if anything else goes wrong.
I must say this SPB BACKUP is pretty sweet ! A+++++