I recently upgraded my m600 to the 2006-10-14_Upgrade_Rom_lvsw_edition.exe, which has transformed my m600, voice dialing works, it's nice, fast and stable, but..... I have lost phone pad.
An ideas how to install phone pad, the option is on the keyboard list but i cannot select it
Iain
I recently purchased a Jamin second hand and i am missing the phone pad aswell, does anyone know were i can and Ian can download it, or a program equivalent to the phone pad.
Thanx
Stewart
search the forums for the phone pad wwe .. i have also attached itt..
Related
I just recently picked up a Targus Stowaway keyboard
(Model# PA 840)on ebay pretty cheap, I also picked up an adapter that converts ipaq 3600 series accesories for use with an XDA, I have the Siemens SX56 att version.
So I installed the software for it and the keyboard actually works great with the adapter plug, but I noticed that if I power off the XDA or if I leave it to power off by itself I can never turn it on again untill I do a soft reset , as soon as I uninstalled the software it works fine again.
Has anyone encountered this before????
I have been on their website and I have tried installing different versions of the software , but still it's allways the same problem??
Can anyone help me?
Under settings/connections make sure "beams" is unchecked, it might help.
thanks
it workes for me
i am not really sure which section of the forum i should post this in
Hi there
I am due for an upgrade on my t mobile contract so I was going to go for the MDA 3,
I have tom-tom software waiting ready to install on the MDA 3 as soon as I receive it, I have just had delivered today the holux gps receiver cr-100 that fits the MDA 3,
I have since noticed that the MDA pro is available and what I am wondering does anyone know if the tom-tom software is likely to work on the MDA pro and will the cr-100 car cradle that I have bought work with the MDA pro as well
This will be my 1st phone of this type so I am not really sure of the ins and outs
Any help great or small will be appreciated
can someone tell me if i have posted this in the right catagory please
The best thing to do is speak to the TT support peeps to clarify whether it is compatible with WinCE 5.01.
The holux gps receiver cr-100 will not fit the Pro because they have done away with the port connector they used to use on the mda3 and replaced it with USB.
I find the good thing about the Pro is that you can just flip it open and sit it in front of your dials without obstructing your speedometer. This also helps with the sound, it appears to sound a little clearer when positioned in such a way.
The only bummer is that if you have the adapter plugged in it doesnt sit as nice but the tablet style screen soon sorts that out.
I would go for the pro if TT is compatible.
The MDA3 was never really supported very well but it did have pocket mesenger and xbackup which are both sorely missed on the Pro.
cheers thank you, thats a great help i guess being as i have paid for the other stuff i will stick with my origional thinking and go with the mda iii,
Hi,
Right now I have the HP iPAQ 6828, which runs great... Recently I'm starting thinking about upgrading it to the HTC TYTN..
1) The device I've tested was HTC TYTN s/n HT630 , Hermes200, Is this model has the problem of screen alignment I heard about? any other problems?
2) Is it really faster than the iPAQ 6828 becuase of its Samsung proccessor? like the ETEN M600??
3) Is it stable like HP iPAQ ??
4) How about voice calling, is it loud & clear? ( As I was an ex. user of ETEN M600, it's so important for me)
anything else I should know about this device before buying or exchanging with iPAQ 6828?
What about ROMS, what's the newst ROM out there?
Thanks in advance
I will not be able to help you on your other questions but for Q1 regarding screen alignment ht630 does have screen alignment problems. You can see a thread elsewhere on this forum for more information. You will see a lot of people with ht630 and complaining about screen alignment.
Personally I think that ht641 and above will be safe as yet I have to see a post for these serial numbers complaining of screen alignment
Regards
sahmedkh said:
Hi,
Right now I have the HP iPAQ 6828, which runs great... Recently I'm starting thinking about upgrading it to the HTC TYTN..
2) Is it really faster than the iPAQ 6828 becuase of its Samsung proccessor? like the ETEN M600??
4) How about voice calling, is it loud & clear? ( As I was an ex. user of ETEN M600, it's so important for me)
Click to expand...
Click to collapse
2) I still have my M600 and I just got a 8525. I think the 8525 is just as fast as the M600. Maybe a little faster. It seems to me like the 8525 loads web pages faster over wifi and edge. I know I am getting faster edge bandwith on the 8525. Switching from one app to the next seems to be the same. The stabilty of WinMo 5 seems to be the same.
3) YES! the volume is alot loader than the M600. I installed all of the volume patches on my M600 and it still can't compair to the volume level of the 8525 The speakerphone on this thing is Very Loud!
The only issue I have right now is my a2dp Plantronics 590A wont stay connected to the 8525. I can pair it and listen to music or video but if I turn off the headphones and turn them back on I can't regain connection to the phones stereo output.
Hi,
One question I have regards the position of the IR port. I use a Thinkoutside keyboard with my QTEK S100 and as the IR port is on the right side its perfect for putting the phone into landscape and typing. I noticed on the P3600 the IR port is on th base of the phone. I''m just wondering if the IR arm on the keyboard will detect the IR port on the 3600, anyone used the keyboard with this phone in landscape mode?
Lastly I was looking at the manual for the P3600 (posted by someone on a blog) and noticed that the QTEK (I think) phone pad input method is not on the HTC. This was installed on my S100 as an external ROM after the main ROM was loaded. Does anyone know if this is also the case on the P3600 or whether the Phone pad from the S100 could be installed on the P3600?
Its a great keypad to use one handed with or without the stylus especially for SMS and MMS,
Thanks,
Latts
Reply
Hi,
I'm a newbie and would like some help pleeease!
I have a jasjam that is running wm6. I bought an iGo Think Outside portable bluetooth keyboard and mouse. They do not support Jasjams... but someone had downloaded the Jasjar driver and installed it and everything worked fine (http://www.mrgadget.com.au/2007/05/imate-jasjamdopod-838-pro-stowaway.html). The only thing is that his jasjam was probably on wm5 judging by the date I went ahead and bought the keyboard and mouse thinking I could download the jasjar driver and be able to use them but I can't get them to work (it only gets up to step 5 in the manual)
Just wondering if anyone knows how I can get my keyboard to work on wm6? I wrote to customer support and they can't help because the keyboard is now discontinued and they won't be releasing any new drivers for wm6
Thanks and looking forward to hearing from anyone