Related
I own 128 MB JAM since March 2005 and use it with T-Mobile USA.
In May I installed 1.11.00 WWE upgrade. I had it synchronized with my desktop and laptop and it worked fine for me.
Last week I was on the Business trip and used the JAM only as a phone and a PDA.
When I've got back home I tried to synchronize and charge it as usual.
Synchronization started, but after 25-30 secs it gave me a message within the ActiveSync window "Connected. Synchronization error" and then immediately after that it changed to "Not connected".
I tried again - same result.
Next I tried to synchronize it with my laptop - same story.
After all I tried to delete partnerships and create new - no result. I am able though to connect as a guest.
At that point I decided to try the hard reset. By coincidence that same day I saw the news that ROM 1.13.00 WWE became available. I successfully installed it and tried to ActiveSync without installing the back-up then - no luck, same problem.
As well I'd like to mention that I have HP iPAQ 2215 and I can synchronize it with both computers without any problems.
So it looks like something is wrong with the JAM.
I hope you guys can help me to fix this problem...
Alex,
Had this problem also but my hard reset solved it. Have you tried re-installing Activesync? You may also want to take a look under C:\Documents and Settings\{Your Desktop}\Application Data\Microsoft\ActiveSync\Profiles to check if indeed the profile data was deleted properly. Goodluck!
Yes, I did hard reset, uninstalled the ActiveSync, erased all files in the 'Profiles' folder, disconnnected the cable, rebooted the desktop, downloaded the latest version of AS from the MS website, lnstalled it.
Then installed the AS, connected the cable, and tryed to establish the partnership.
SAME negative result.
It created the partnership and wright after it said 'Connected. Synchronization error' and immediately droped connection.
I am puzzled here...
I'm stumped! Usually a HR solves this for me... Have you tried a Bluetooth sync (this may be a temp workaround til you find the solution) have you tried using a diff USB port and/or cable to sync your device?
bnycastro,
Thanks for your help.
No, I did not try the bluetooth sync yet, but I definitely know that it is my JAM's problem now.
This morning I installed the latest version of ActiveSync available on the MS website on my daughter's PC. ActiveSync was never installed there before.
Then I tried to sync the JAM - same problem as I described in the previous posts. Right after that I paired my HP 2215 and no problem. It work as it supposed to.
It is a real mistery cause between the last time I was able to syncronize the JAM and the time the problem occure I did not install any software, did not pair it with any other PC... I only used it as a phone and a PDA on the trip.
The only what I noticed is that all of a sudden it started to freeze after every 10 -15 min of use. But now after I flashed the ROM to 1.13.00 it works normally except for the syncing problem.
Any other ideas how I can fix it?
I would really appreciate your help...
I'd suggest the Bluetooth sync and maybe taking it (your device) for service.
I am sick and tired of having to hard reset my wizard to get active sync working again!
I have had this problem so many times, activesync will work fine for a period of time and then at some point it will stop working and all i will see on my pc is 'connecting'.
I have asked before if you can just re-install active sync on the device but i didnt get an answer
What i am asking is, is there another piece of software that i can use to sync my device with outlook?
I don't think you can just reinstall activeasync. Have you been using any notification clearing software?
guttrhead said:
I don't think you can just reinstall activeasync. Have you been using any notification clearing software?
Click to expand...
Click to collapse
no. the only thing i have on my phone is pocket zen phone (not set up to clear notifications), and TCPMP.
One thing i did notice was strange that last night when i was trying to connect to my home WLAN i could only connect if i removed the storage card! Weird but probably unrelated......
You'd better remove all partnership on your 9100 and then connect again instead of making HR each time.
Had problem initially and found it was firewall.
Have you checked your firewall to see if it is blocking it from time to time?
Not trying to teach you to suck eggs so to speak but you may need to put the device into the trusted zone?
I have disabled the firewall, in fact I always disable the firewall and the av prior to sync.
I have also removed partnerships to no effect, thanks for your help anyway guys.
looks like another hr....
Having exactly the same problems here ... 4.* series seems really buggy, have no wlan or bluetooth .... but sadly its the only thing working for wm5 devices .... microsoft should be ashamed for such a sad update to activesynch.
Hi, I have owned a dopod 818 pro for about 1 month, and a new problem has come up. Synchronization used to work perfectly, but recently when I connect it to my computer, it will either read as "connecting" but not really making the connection, or show up on my computer as "synchronization error" without letting me know why. The latter is happening more frequently, and soft resets do not always help. Does anyone have similar problems?
Also, I have been wanting to automatically disconnect from GPRS/EDGE everytime the device checks emails (every 30 mins for example). How do you do that?
I've had similar Activesync issues. very annoying.
I find soft resets usually do help 95% of the time... but am close to doing a complete hard reset! :roll:
Quite possible that a firewall is blocking your AS software. Have you installed any AV or firewall software recently by any chance? If disabling your firewall's doesn't help, just uninstall AS and reinstall but this time do it on a different drive. This has helped many people over time and should probably help you out too.
A HARD reset of my device seems to have helped - for now! :twisted:
Unfortunately I have tried all the following:
1) disable firewall (zone alarm in this case)
2) uninstall then reinstall AS to a different hard drive
3) hard reset
I wonder if it has anything to do with the software I install onto the device. However, I have had it for over a month, and I use the same set of software the whole time (even after hard reset) - sbp pocket plus, pocket informant, phatnote. I am getting quite frustrated now, having to soft reset every time I want to synchronize the device. I think I may try to hard reset again and not install anything on it other than the data from my outlook, and see if that will work.
BTW, anyone know how to auto-disconnect GPRS/EDGE after the device automatically connects to GPRS and check email? I have tried to set the GPRS_autodisconnect in the registry from 0 to 1, but it doesn't work.
Thanks.
chunkitho said:
Unfortunately I have tried all the following:
I am getting quite frustrated now, having to soft reset every time I want to synchronize the device. I think I may try to hard reset again and not install anything on it other than the data from my outlook, and see if that will work.
Click to expand...
Click to collapse
I share your pain. It's a big PITA to soft-reset just to have it sync up "properly". Just taking the device out of your cradle (for lunch, or whatever) and sticking it back in will result in sync errors :roll:
As an alternative, you can try hard reset, followed by a soft reset so that it does not install the applications bundled inside the ExtROM - I think they are the SmartDialer, Cyberon Voice Commander, and a couple others.
Hi, I had the problem - after disconnect from GPRS, I am unable to reconnect unless I reset the device. I just try Phone Alarm which has an icon to connect and disconnect the GPRS connection - and now I can disconnect and reconnect without problem. Give it a try. Download from http://www.pocketmax.net/phoneAlarm.htm
You use the Windows Mobile 5.0 for PocketPC ActiveSync patch for the 818 Pro to solve the problem
You can use the Spb GPRS Monitor to connect and disconnect the GPRS connection!
Hi. This has worked for me, and solved a massive problem. Hope it helps someone else too.
Step 1:
Ensure you are trying to fix the same problem as I was by looking at the symptoms, which were:
- HTC Wizard synchronizes OK when you plug it in the first time
- It stays in sync if you leave it plugged in
- If you unplug it and then plug it back in at any time later, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync
- If you unplug it and soft reset before reconnecting then it's fine
Essentially, the Wizard was requiring a soft reset between every connection to the USB cable, or it would crash and require a reset anyway!
These issues have been discussed in about 10 threads on this board, and on pretty much every other resource for Wizards and Pocket PC devices on the net. I was, however, totally unable to find something like this which directly addressed the problem.
Step 2:
Download a program called Dr. TCP from here: http://www.dslreports.com/drtcp
Run it to open a dialog box with loads of fields with strange techy names... no, i didn't understand it either. However, I've been searching the net for days and I found an article here: http://www.pcworld.idg.com.au/index.php/id;504222574;fp;2;fpid;1277378924 which told me how to work the numbers out...
In the bottom drop-down box, select "Windows Mobile-based Device" and enter 1492 in the box next to that. That's your maximum "MTU".
Here are the settings which work for me (from the top). If i don't mention a setting, I didn't change it!
Tcp Recieve Window: 261360
Dial Up (RAS) MTU: 1492
Path MTU Discovery: Yes
Save and Exit Dr. Tcp.
Step 3:
You need to open "Network Connections"... in XP, that's Start > Connect To > Show All Connections. I'm sure you can find it yourself. Anyway there should be an icon called "Local Area Connection (x)" with "Wireless Mobile-based Device" written in grey underneath.
Right click on that and select DISABLE. This will close your USB connection to your Wizard so those MTU settings can be applied.
Now unplug your Wizard from its cable. Here, I tried right clicking on the connection and selecting "Enable", but it just errored. So you need to unplug it.
Step 4:
Reconnect and see what happens. I am now happily disconnecting and reconnecting as many times as i like and it just keeps on synchronising itself. MAMMA MIA!
If this solves your nasty "i need to reset every time I disconnect" problems then please post here to say so. If it doesn't work then post here also, I guess. If this is a solution for you then credit for this is not mine - it's just the sum total of a lot of searching across this and other forums, websites and message boards. THANKS!
not working
These steps did not work for me.
I still have to reset the device otherwise I get this message after about 5 minutes.
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
It appears to be only a problem syncing as I can still explore the device.
well...
...that's depressing. I genuinely thought that would work for other people too.
Did you read that PCWorld article I linked to? it explains how I got those numbers... they could be different for you, perhaps?
I'll keep thinking...
I did not look at the article. I'm having other issues trying to get my 2 computers synced with my mobile device http://forum.xda-developers.com/viewtopic.php?p=234189. Once I get those resolved I can try some different things.
On my home computer I am only synchronizing favorites and files and it doesn't appear to be a problem.[/url]
Oh right ok. I read your other post too, but I only have 1 PC for home and work so i can't help with that.
Has anyone else tried this?
I am no longer having the problem since I fixed my other sync issue (multiple computers issue). I had reinstalled activesync and did a hard reset on my device so maybe something else got cleared up. I am also having much better luck with the way my device is running. Before I was getting frequent slowdowns and lockups. I am a much happier customer and will be sticking with my cingular 8125. I just love all the features, but the activesync issues and slowness was starting to get to me. I'm so glad it is all behind me now and I can start to really enjoy the thing. Although I have yet to connect my bluetooth headset, that may have caused me issues too. Sorry I couldn't be more help testing this out.
I and a work college have had this problem on both our systems and found that it was being caused by Avantgo.
It would work fine and sync every time for days until we installed Avantgo.
After these we both had the symptoms you describe in the first post until we did a hard reset and re installed everything except Avantgo, it was then fine again. As a test I then reinstalled it and it started not syncing again, my college who has not reinstalled it has had no further problems.
I have now been running for 3 weeks with no problems and no Avantgo.
If you have it installed it may be worth trying it without for a wile and see if it helps.
Didn't work for me. Still no connection when plugging in for the 2nd time. MTU value changes back to blank when opening the Dr.TCP again, the other values are ok though. But thanks anyway for the hints!
Greetings,
Andreas
Didn't work for me neither...
just to check (i know this sounds daft) but you did DEFINITELY press the SAVE button in Dr TCP before you pressed the EXIT button? can't imagine why it wouldn't store the data.
aaaaaaaaanyway i guess it's not the ubersolution i thought it was
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Any updated? I'm having this same problem, except my device won't connect at all! Even after a reset. It connected once and that was it.
Hi Silentz,
sure, I saved the settings. I'll try the ActiveSync clean install-method and report the results. 'Hope that MS will put out an update or better version soon! Rumours out there?
Greetings,
Andreas
tried and failed...
tried the above TCP solution- Not working for me either...
Found best solution. Go try the latest imate rom. You can then plug out/in the cable as many times as you want & it'll just work fine.
Bebbo said:
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Click to expand...
Click to collapse
It seems to be as soon as you access the internet through the passthru connection on Activesync. So installing AvantGo/PocketWeather might explain this to a certain degree as they may be accessing the internet.
Incidentally, how could Microsoft have stuffed up so badly with Activesync? It's a tiny program but works so badly - Couldn't a third party come up with a different version of Activesync or something? I'd pay for it if it worked better than this crock!
Just for info, the latest iMate ROM (With Push Email) does indeed seem to fix this issue. Obviously it was with the WM5 side rather than anything that could be fixed on the PC side.
My Active-sink probelms disappeared since upgrade to the latest iMate ROM. Has been working like a charm with all apps and utilities installed, Tweaks2k2, Spb Pocket Plus, Pocket Informant, Worldmate Pro, etc...
told you it works
cheers
I am running the 2.08 (Qtek test) rom and have this issue since last friday. before that never had it!!
What I changed on thursday was: enable exchange server sync and use it. because push-email si no solution for me I just disabled it and dropped the association.
Then (on friday) the trouble started.
I tried DrTCP...and ended up with a broken netlogon (secure client) service on the pc. The IS solution for that was a new image . . thank you very much.
I am back on track with the pc now, but AS still slows down my device.
Are any of you having this trouble using or have used:
-Push email
-Blackberry
What is the amount of free program memory on your device? Mine is around 6MB (probably caused by Blackberry install which I cant remove). . . .
Hi,
I have researched in the forum in order to find some issue similar than mine but unfortunally I couldn't .
I bought my Blackstone at the end of December and since that, everything worked fine: I used to sincronize data with activesync at home (Windows Vista) and in the office (Windows XP), connected the device to the internet, downloaded e-mails (using outlook or Seven Mail), used GPS (Destinator and Igo8). Everything was fine until the day I decided to perform a hard reset. Then the nighmare comes! After the hard reset I started the sincronization with activesync. Everything sincronized very well. However, when I configured my e-mail accounts the tmail.exe hanged. Also the activesync stopped sincronizing. It stays all the time with the message: "looking for changes"...but never starts sincronizing. Then, I tried to perform another hard reset. The same thing happened: the first sincro is fine (in Windows XP or Windows Vista). But then, if I configure e-mail accounts or if I reinstall GPS programs, the activesync hangs again. I can only sincro with activesync if I don't use any other connection application. If I´m using GPS application and GPRS starts, immediately GPS hangs. Is that possible? I performed probably 10-12 hard resets, reinstalled activesync 3-4 times, but the problem keeps unsolved. Anyone have a clue for this issue?
rgds
Hi
Anyone can give me a clue about that?
olivas1971 said:
Anyone can give me a clue about that?
Click to expand...
Click to collapse
Hi olivas1971 and welcome to the forum.
Your problem does sound strange & unusual. It sound as if you might need to flash another radio or ROM or both. But for that you will need to use hardspl on your device first (preferably from XP as it has less problems).
Use the search function and readup WELL before you start. Good luck with it.
Hi Abram,
I have flashed my device with new ROM and radio as you suggested. My device seems to be fine again. I´ll be monitoring it during this week. However, I want to thank you in advance, because I´m sure you find the solution.
brgds.