Dear all,
One year ago, I tried to use the Dopod SDIO wifi successfully. But, after a few upgrade of rom and radio rom, I found that it was not function well.
Current status:
1. my O2 mini can detect the card2
2. the signal is quite unstable
3. sometimes it can get the IP address form my wireless router
4. but, I can't browse anywhere with the IP address
Action tried:
1. flash rom and radio rom with different version, different language
2. after flashing rom with version 1.11, or 1.12, I immediately test of my wifi, it can use for 10 sec to few minutes. But the signal seems unstable, and can't browsing any website after discconected.
3. no matter soft reset or hard reset, it can't connect again
4. same sitaution occur with different language of rom
Another strange is, I wonder why I hard reset, soft reset, and after flashing the rom, the password of WPA is still remain in my mini.
Do u guys have any suggestion and is there any software can help me to troubleshoot it?
Thx.
Related
Hi all,
I have an XPA S200 alias Prophet from Swisscom Mobile. The first thing I did was installing the "PDAMobiz Editon Upgrade Rom for SPL 2.15.0001" ROM which worked well for a while.
Now I can't sync it anymore using the USB connection (IR works). Yesterday I installed the ROM again, restored my data and was able to sync. I thought ok, everything is ok now. But today sporadically I have the same issue again.
If the connection is not ok, my computer only shows an unknown device.
Does anyone have an idea what can cause this problem. It seems like the USB port of the device is blocked from time to time.
By the way has anyone an English version of the original Swisscom ROM for the S200? I have forgot to back it up before installing the new ROM.
ROM version: 2.15.13.27 WWE
ROM date: 3/9/06
Radio version: 02.19.21
Protocol version: 4.1.13.09
ExtRIN version: 2.21.13.102 PDAMobiz.com
I have ActiveSync 4.2.0 (Build 4876) (English) installed on my computer.
Best regards,
Tom
Today I was playing around with my device. I tried several things, but it is not possible anymore to connect using USB. Even a ROM upgrade doesn't work anymore.
I can still sync my device using IR, but any ROM changes are not possible anymore.
Don't know if this will help but found that connecting the SPV M600 to the USB lead occasionally tripped out the USB 2 port on the computer. Just switching the computer off and on didn't help as it was only a soft reset. Switching off and disconnecting from the mains for 60 seconds, then switching on again reset the USB port and allowed activesync to work again (untill it tripped out next time). This has happened about 5 times now in 3 weeks. This applied to all USB ports, not just the one connected to.
Unfortunately this doesn't help. I made some further tests. A friend has the same device.
Using my computer I can sync his device but not mine. Using his computer we can sync his device as well but mine doesn't.
But again suddenly it was possible to sync sporadically. Now I think there is really a problem with the USB connector of the device.
Because I assume a hardware problem and need to contact the vendor I need to get an original ROM from Swisscom now (no matter which language/English preferred).
Does anyone know where to get such a ROM? Swisscom currently doesn't offer any to download. Additionally is there a way to upgrade the ROM using an SD card?
I think I got one step further. When I use the USB-switch tool and change from rndis to serial and back Activesync connects again.
For a moment it is connected and syncing but then it gets disconnected again.
No matter what I try the connection is not stable.
Hello,
this sounds like exactly my problem.
Previously i had T-mobile MDA (with dipod rom), and it worked fine, no problem at all.
Now i have a prophet (again Dopod rom), and i've had nothign but problems. Activesyc initially worked once or twice, but has not for a long time now. i've tried deinstalling, re-partnering, deleting everything, etc. I've even now had XP re-installed on the computer and done a cold boot on the Prophet...now change!
The only thng that works is syncing via infrared! This works every time, no problem at all.
I have no idea what the issue is...but it is very frustrating.
i have the same problem, it worked for two weeks. today suddenly does not connect anymore. WTF? I install new activesync, rebbot divece, computer & still nothing...
doesnt work on other computer also... Which files are inportent on divice to connect it with activesync? Please help... tnx
hello
please help i have a mda compact a cannot get the phone to wrk any more no service.
rom flashed
hard reset
does not go into factory reset (2 side buttons plus reset holding on to 2 side buttons) please advice this site is awsome
mda compact is a "magician", you may already bricked your phone by flashing a 'wizard' ROM into it.
it is not bricked. it does search and then stops
Hardreset it
Start -> Settings -> System -> Clear Storage
heelp
my friend there is no such route . yes the wizard format is like that,i have hard reset it (when it ons annd goes to the auto custamisation bit
rom ver 1.13.00 wwe
radio ver 1.13.00
protocol ver 137.43
no sevice
turn on flight mode
i switch it on and off (originally was not able)_
get antenna sign with !
You are very confusing. At the very first post, you just mentioned that it "does not go into factory reset". You need to provide more information, example (not limited to) the ROM that you've flashed, the ROM source, method of flashing the ROM, etc etc etc. There is a limit of patience how many rounds of 'suggest-answer' session I can go through. Try to give as much info as you can. For example, you have not even confirmed with me if your phone is a Magician or a Wizard.
From what it seems, your ROM is way too old. Mine is 2.xx.xx version. So, yours is old. Flash a new *official* ROM and try again.
thank you
i thank you what i had was a magician with no service and a wizard with a damaged screen, what i did was swop the screens and unlocked the wizard with locwiz 3 to use my o2 chip now the wizard is fine. but i am in the process of fixing the magician.
i thank u for u'r time
OK heres my situation:
i upgraded from the stock o2 wm2003 to wm6 using the wiki ROM:
Helmi Windows Mobile 6 Profesional R0
CE OS 5.2.1620 (Build 18125.0.4.2)
now on bootup it says
R:none
G:none
D:5.60.00 WE
It boots up fine but....
i cant get any reception.- just says "no service"
i have also tried disabling and re-enabling "Phone" in com manager
Yes, i have done a soft reset, hard reset and ive tried XPLODE wm6.5 and my current wm6 ROM.
XDA unlock all reported a successful unlock.
HELP!!!
OK, i did the thing in the ROM post said:
"R None if you take out battery and turn it on without push the reset button twice.
SDK?"
and it works now but when i turn it on i have to press the reset button twice every time
can someone help?
first of all you must unlock sim under WM 2003, then remove the extrom of 2003 to gain adidional 16 mb of storage (resize DOC), then you must upgrade to radio version 1.15 and then you must try any WM5, 6, 6.1, 6.5 rom
so now flash your shipped rom, you may find preferred rom for your operator in my signature, then start everything from the beginning
ok, it has kinda settled down now, working as normal.
I have "unlock sim under WM 2003, then remove the extrom of 2003 to gain adidional 16 mb of storage (resize DOC)"
If i wanted to upgrade my radio version would i have to flash the ROM again?
no you can flash radio rom only without the OS
Jejeje
Hey Xplode i never was able to see that tools like unlock extrom and repart DOC works on my BA... it always shows an error! when i execute the unhide hide repart etc etc.. so I upgrade even tought jajaja.
they only work on WM 2003
xplode said:
they only work on WM 2003
Click to expand...
Click to collapse
are you sure xplode, cause i unlock my phone using the tools from the BA wiki and im using wm6.5.
ok,
i upgraded my radio to 1.15.....
but i still got the problem
none
I get this on my wm6.1 but normally gets sorted after a soft reset
HMM!!!!
Same problem, after updating from stock WM2003 to WM6.1PRO all steps done like the wiki steps except the ExtRom step, couldnt get the unhide, unlock program to run (missing file or libraries error), so i flashed sun's WM6.1PRO without the extra storage, now when i change the battery i get the NO radio bootloader, still im able to fix it by doing a soft reset, but the strangest thing is that im not able to use the wifi :/. So the thing is, when i turn on without the radio i can use the wifi, but no the phone(airplane mode), and when i do a soft reset, the radio shows and i can use the phone but the wifi doesnt turn on at all!. Any help please, dont make me choose betwen my phone and my wifi
PD: is not only the radio missing the i change the battery, also R:none G:none
I have a Qtek9090
very odd ,i can use my wifi when the phone is on.
But i went from wm2003 to wm6.5 to wm6
wierd....
so, is there a solution? I've got the same problem
Ops! Solved. Do a soft reset via the button.
(I always do a softreset via unlocking the battery and locking it again)
Every one here should know that there is no WM 6 for BlueAngel by microsoft. it is ported on BA by helmi_c and that >> R none and G none << Bug is in WM 6 from very first day. SO Whenever u pull the battery out u need to SOFT Reset the device after putting the battery on phone.(u need to wait to start the phone to reset, just put the battery and insert the stylus at reset point.)
there is no point discussing about this anymore. thread should be closed.
i have the solution about this problem, im recovery from it.
first of all, downgrade ur ba tu ship rom, and go back to upgrade 6,5 rom, after finis doit "WM5" hardreset.... search the way in wiki.
wala........its done and run normal r;none g;none not see again. have try it
This is an old problem... Rnone Gnone
solved by sticking your soft reset button after changing battery or a hard reset.
The Wifi-Phone problem is solved by buying a new battery. The Wifi module wont fireup because of the lack in power draw since the phone is using much of it.
Buying a new battery solves plenty of problem. even OS speedup because it solves the lag the "modules" (e.g camera/lan/phone/mmc) detection gives while in bootup or execution.
If you still have problems. We can always point to the wiki.
Have a nice day!
-SS-
i've had wm6.1 4 a while and the problem was that whenever i try to switch on wifi from the comm manager that round working hourglass shows and then it doesnt turn on , i dunno what happens but the symbol of wlan with the little x on it are still the same
i downgraded back to wm5 2.26 and the same problem then i installed the official T-mobile 3.08 rom and still the same problem
worthy to mention that the official ruu didnt work wz error 326 so i had to extract the nk.nbf and cook the rom again and it worked
does this mean that my wlan hardware is faulty ?
or is it a software problem ?
does anyone have the same problem? can u plz help me ?
i searched all aroud the forum and i tried to hard reset my t-mobile vario several times and still doesnt work
I'm having the same issue with my acer f900. The wifi has been sporadic, and doesn't seem to turn on with comm manager. When you go to settings/connections/wifi all you get is a configure network adapters page. All of the the settings seem to be correct, but it doesn't show any wireless networks.
the whhole forum is full of this such a questions just flash to another rom
erikvario said:
the whhole forum is full of this such a questions just flash to another rom
Click to expand...
Click to collapse
well i've tried that hundreds of times , it just doesnt do the trick still dont have wifi
Help..
I flash my Dopod 818pro with a new Manila Blue ROM couple of days ago. It work just fine until yesterday, when i try to connect to my office wireless (WPA PSK), i cant detect anything. I get a spare AP and configure it to WEP open and my Dopod still not listing any available wireless point even after i put my Dopod ON THE wireless router beside the antenna. The indicator shows that my wireless is turned on. Tried many suggested silution but to no avail. Have tried this step :
1. Install WiFiFoFum and scan. Not Available
2. Flash ALL RADIO rom version available in this forum. Not Available
(I flash one radio rom, did a network scan before flashing another one..)
3. Flash the NVID_RUU and scan. Not Available
4. Tried not to panic and scan. Not Available
5. Tired of everything, Flash Manila Blue ROM and post here..
Does anybody have any solution?
My Dopod is a G3 with this specs :
ROM version : 20.5.61.33 WWE
Radio ROM : 02.61.21