Database Users

MS Voice Command when unit is closed?

Hi all, I am new to this forum.
I own a Dopod 900, and currently trying to get MS Voice Command to work properly with my unit. I believe one of the problem with this application is that it does not respond to command while the unit is in closed mode (the pda screen in inside). Is solution to this problem already available?
I have searched the forum but have not been able to find any solution. I apologize if I missed it, please kindly point me to that posting if there is any.
Any advise is greatly appreciated.
- Josh :?:

From what I've read so far there isn't a fix I'm afraid. It's not fully compatible with WM2005 and will just have to wait for an update from Microsoft :-(

Thanks for your reply. That's too bad. I really have high hope that there is a solution for just this one problem, as there are already tweaks for the other problems. Being unable to receive command in closed mode really make MS Voice Command very much less usable. Too bad.
- Josh

I agree, but at least it's a step up with the other voice dial (that comes it with?). Couldn't do dialling from BT headset at all on WM2003 :-(

The "closed mode" doesn't bother me as I carry the Exec round in a Krusell case, with screen up. This allows me to instantly answer the phone when it rings (having seen who's calling first on the screen).
But there are a few more annoying problems with MS Voice Command 1.5 (I have UK version) present under Windows Mobile 5.0.
This one is unique to WM5.0:
- The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
GBugger...
The following coupla' niggles are also present under WM2003/03SE.
- The days of week when answering "What date is it today" (somehow UK regional settings don't even have it, so I had to enable it in registry under NLS settings) -- all are announced correctly except Wednesday & Thursday, which are sounding simply as "Wed" and "Thu" instead of proper name.
- The signal strength for 1,2,3 and 4 "units" is announced as 30, 60, 90 and 100% correspondingly, instead of 25,50,75,100 which would seem more logical here. I don't know though if it's just caused by something real or an attempt to easily convert
That said, the application is enormously useful especially with the Krusell case, because the carrying shape for Exec in this case is PDA shape with screen up; but it's protected by screen cover of the case and you can't really write on the screen without opening the case -- so voice activation of programs and then controlling them by 5-way navigation control, is really a great way of using the Exec Examples of these programs are the eWallet (ever forgotten your PIN numbers or clothes size?) and speaking date/time, very convenient when you can't look down there.
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.

EastExpert said:
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.
Click to expand...
Click to collapse
Really, MS should have had this wrapped up ages ago. So disappointed. I want a device like the Exec, but with Voice Command fully working and A2DP sorted, and it's a shame I still can't get all this.
I was so used to the VC software on my JAM, shame the Exec is giving problems.
And I'm tired of tangling my headphones up...
MS, sort all this out already.

EastExpert said:
The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
Click to expand...
Click to collapse
Copy the outres.96.dll into the windows folder and the contact will display correctly.

I'm sorry, but no, it doesn't work for me. Same effect as without outres.96.dll. And yes, I made a soft reset after copying it to the windows dir.
So the next question now is: how to remove the file again?
If I try to delete it, Resco Explorer says "Cannot delete file 'outres.96.dll'. The process cannot access the file because another process has locked a portion of the file."
If the file is useless, then I want to remove it from the device. But it has been blocked by another process.
Thanx in advance
tomestos

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

guc925 said:
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
Click to expand...
Click to collapse
I have answered 'yes' to the security check. Nevertheless the dll doesn't work for me. So I want to remove it now, but I can't because it's blocked by some process.
Thanx in advance
tomestos

I've copied the file gnassel suggested into my Windows directory (using the explorer on my desktop pc).... rebooted the exec.. and voila.. it's working like a charm now.. My voice command shows the contact when I say : "Lookup XXXX" or when i call someone, it confirms the person and shows his information just fine. Norte I am usin the u.s. version of voice command 1.5.
Thanks gnassel !

This is a reply to my own posting above.
I did the soft reset using an application called 'psShutXP' (maybe someone knows it; one use it in order to switch off or soft reset the device). Voice Command's contacts mask doesn't worked.
A few minutes ago I soft resetted the device using the "original" reset hole. And voila: Voice Command works as expected!
So there seems to be a difference between "soft reset" using psShutXP and soft reset using the reset hole.
Sorry for the confusion. THE FILE OUTRES.96.DLL WORKS!
By the way: What exactly does outres.96.dll?
Best regards
tomestos

Many thanks gnassel, it works great..

The file was from OzVGA

Thanks for drawing attention to it and posting it, or I wouldnt have know..
Take a thanking damnit

Guys, where do I put the outres.96 dll file again? If I am using File Explorer there is a "WINDOWS" Folder from the very root with a lot of files. Is that the folder I am suposed to put the oures.96 dll file or just leave it outside in the main root?

cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)

gnassel said:
cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)
Click to expand...
Click to collapse
It's "\windows" not "C:\windows".
Best regards
tomestos

Thanks everyone. I thought for a while I have to plug it in my computer too.

fit4cat Hermes Tweaker v1.1 released

Hi all,
i have released v1.1 of my Hermes Tweaker.
News here:
http://www.fit4cat.de/thread.php?threadid=91
English Peoples can register here:
http://www.fit4cat.de/register.php?styleid=6
Have fun.

thanks again! it's working perfect here

pof said:
thanks again! it's working perfect here
Click to expand...
Click to collapse
thanks goes to Arne Hess from http://www.theunwired.net again
he has test a lot a found a lot of errors before release
Also Thanks to Alex Januschewsky => http://www.mobilitynews.net
to Thomas Möller => http://www.sotmysoft.de
They all have test for me
THANKS TO XDA-DEVELOPERS FOR ALL TWEAKS

Great job, some very useful tweaks added.

excellent - just what i was looking for..
keep the good work up!
thanks

its got the bypass certification built in when you select unlock extended_ROM.
Can now edit config.txt to add a cab that auto-install protection software (eye on thief, with my config.ini) to send me wife the thief's phone no.

Hey BongoUser,
Great tool - many thanks.
One suggestion regarding Wifi:
I understand that the TyTN uses WiFi only at a rate of 11Mbit. A modification of the registry entry dot11DesiredTxRate from 0 to 13 will increase the speed to 54MBit/s.
Have not tested yet if this change will then allow operation in 54Mbit range only but I presume that also the slower networks are ok.
Maybe worth adding to the tool.
All the best,
StonyA

Hi BongoUser,
really great job !
Here a suggestion for a future update of your software, which should be fairly easy to implement:
An option to swap the HTTP User Agent in the Registry and afterwards have swap it back again to the TyTN default value.
The HTTP User Agent can be found as a Registry key (don't know it by heart at the moment; can drop you a line if you'd need that information) and allows you mimic your device for webservers checking this value as an other device, e.g. a Nokia phone
Apart from just making fun of this function there is also a practical use in some cases, in fact where a webserver checks the value for either oresenting a different screen resolution or switching to WAP mode (note: some Nokia phones just have a very poor screen resolution or even cannot present real http pages).
In some cases WAP pages are of advantage versus real http webpages because their size is smaller, e.g. when just retrieving pure information.
While there are surely more "sophisticated" (and probably also complex !) ways for upgrading the Hermes Tweaker I think this one would be swiftly implemented.
Regards
ghl10000
BongoUser said:
Hi all,
i have released v1.1 of my Hermes Tweaker.
News here:
http://www.fit4cat.de/thread.php?threadid=91
English Peoples can register here:
http://www.fit4cat.de/register.php?styleid=6
Have fun.
Click to expand...
Click to collapse

@BongoUser,
Thank you very much for this nifty tool.
However I have found something strange with it.
I disabled the CommManager from the taskbar and suddenly the battery icon is disabled as well.
Cheers,
Drifter

Very sorry to be so stupid !!! But I confess that I don't really understand what mean "Extended Rom" ?
Does it mean that I can use a part of this "extended rom" as a space ram to softs ?
What does it mean if I select "Mount Ext Rom" and "Unlock Ext Rom" ?
Thanks to be indulgent.

H2zO said:
Very sorry to be so stupid !!! But I confess that I don't really understand what mean "Extended Rom" ?
Does it mean that I can use a part of this "extended rom" as a space ram to softs ?
What does it mean if I select "Mount Ext Rom" and "Unlock Ext Rom" ?
Thanks to be indulgent.
Click to expand...
Click to collapse
It means the space where you can find the CAB Files from Orange or O2.
It will be installed after every hardreset.
If you don't know what Ext Rom is, don't unlock it and don't mount it !

Is there anywhere else this can be obtained ?
Registered about lunchtime - and still no confirmation yet so can't download it
It's not that I expect them to jump at my command - I'm just keen thats all

zoidster said:
Is there anywhere else this can be obtained ?
Registered about lunchtime - and still no confirmation yet so can't download it
It's not that I expect them to jump at my command - I'm just keen thats all
Click to expand...
Click to collapse
Hi, i have activate your account.

BongoUser said:
zoidster said:
Is there anywhere else this can be obtained ?
Registered about lunchtime - and still no confirmation yet so can't download it
It's not that I expect them to jump at my command - I'm just keen thats all
Click to expand...
Click to collapse
Hi, i have activate your account.
Click to expand...
Click to collapse
Excellent service !! Cheers mate

H2zO said:
I don't really understand what mean "Extended Rom" ?
What does it mean if I select "Mount Ext Rom" and "Unlock Ext Rom" ?
Click to expand...
Click to collapse
Read the Hermes for Beginners page on the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners

Thank You
BongoUser said:
pof said:
thanks again! it's working perfect here
Click to expand...
Click to collapse
thanks goes to Arne Hess from http://www.theunwired.net again
he has test a lot a found a lot of errors before release
Also Thanks to Alex Januschewsky => http://www.mobilitynews.net
to Thomas Möller => http://www.sotmysoft.de
They all have test for me
THANKS TO XDA-DEVELOPERS FOR ALL TWEAKS
Click to expand...
Click to collapse
Thank you all for this useful and very functional bit of free software.

Thank You
BongoUser said:
pof said:
thanks again! it's working perfect here
Click to expand...
Click to collapse
thanks goes to Arne Hess from http://www.theunwired.net again
he has test a lot a found a lot of errors before release
Also Thanks to Alex Januschewsky => http://www.mobilitynews.net
to Thomas Möller => http://www.sotmysoft.de
They all have test for me
THANKS TO XDA-DEVELOPERS FOR ALL TWEAKS
Click to expand...
Click to collapse
Thank you all for this useful and very functional bit of free software.

Registration on www.fit4cat.de
I registered on page http://www.fit4cat.de/register.php?styleid=6 two days ago (to get fit4cat 1.1) but I didn receive any confirmation E-mail on my address up to now . My username and pasword is not funkction. Where I made mistake? Thanks...

Re: Registration on www.fit4cat.de
Jetra said:
I registered on page http://www.fit4cat.de/register.php?styleid=6 two days ago (to get fit4cat 1.1) but I didn receive any confirmation E-mail on my address up to now . My username and pasword is not funkction. Where I made mistake? Thanks...
Click to expand...
Click to collapse
Hi,
i don't know where is the problem.
I had deletet 15 Accounts yesterday with no activision.
Please register again and send me your Username via PM.
I activate your account.

Re: Registration on www.fit4cat.de
Check your spam folder, my antispam filter detected the registration email as spam.

tool for monitoring cells

Hi there,
are there any devices/programs that can show all visible cell-id, not only thw one currently connected?
If you know let me know.
saulius
[email protected]

phonealarm pro can do this. once you montior the cell, you can link profiles to it and make it set your device config as you like when you come home or at your work, etc. very useful!

try type *#*#364#*#* in phone application

blondak said:
try type *#*#364#*#* in phone application
Click to expand...
Click to collapse
does not work for me

hi there,
jep thanks ...364.... works for me. is there any program that worked with cell1-cell6 info?

excellent tip. Thanks

CellProfileSwitcher can log any cell's it encounters and also near by ones. It can do more than just profile switching.
http://maniac.fschreiner.de/

h4waii said:
CellProfileSwitcher can log any cell's it encounters and also near by ones. It can do more than just profile switching.
http://maniac.fschreiner.de/
Click to expand...
Click to collapse
@h4waii
I have installed this software on HTC Universal but the prog doesnt recognise any cell. Is this device hardware limitation or I need to find proper version?

cellprofileswitcher
yes, i tried this one too...
you can check the forum and will notice that tytn gsm module is some kind different so it doesn't work.
For this reason all ideas are welcome.
I'm interested would it be posible to store data to a file, if the data is seen at the screen, suppose we enter some code (like get imie), or run program and the required information is showen on the screen...

getting info
Maybe someone could share how to get info such like cellprofileswitch returns?
Since i need to combine more information at the same time and know that cps won't manage to do it...

Yes !!!
Work in my Cruise !
Tanks Blondak

Microphone accessory - button for Voice Command

If you push the button on the microphone which comes with the X1, it answers a call. If you push it twice it seems to call the last person you called.
Is there a way to use this button to invoke the Voice Command monitor?
Thanks

I found it easier just to re-direct the Soft Buttons!!
Left for Voice Command, Right for Comm Manager
Stuart

Yep, that's exactly what I have. Best set-up by far.
But when in the car, it would be easier to use the mic button, so I'd like to double up on Voice Command access.

So.. no-one else has managed this either?

at45 said:
So.. no-one else has managed this either?
Click to expand...
Click to collapse
Take a look at here:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
I am going to include Cyberon VC 2.0 in my rom but it will be Cantonese since it's my native language.

So, to recap the request was for a way to use the Microphone button as the Voice Command button...

jackleung said:
Take a look at here:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
Click to expand...
Click to collapse
What is this goint to change? I searched the registry for a way to use th mic-headset-button as a remote for my X1...which means to map a button, application, etc to it. Is this the way to do so?

derliebewolf said:
What is this goint to change? I searched the registry for a way to use th mic-headset-button as a remote for my X1...which means to map a button, application, etc to it. Is this the way to do so?
Click to expand...
Click to collapse
Beside the "push once', and "double push", a "push & hold" action will call this exe such as Voice commander in my example.

jackleung said:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
Click to expand...
Click to collapse
But this doesn't have anything to do with the microphone button.

Do you read? Of course it does if you are talking about the button in the pic
If you "hold" the button, yr X1 will call the exe program specified in this registry. X1 stock rom does not comes w/ any VC program and you have to install one yrself. Of course, if you put in other program like Core player, it will be start if you hold the button.

jackleung said:
Do you read? Of course it does if you are talking about the button in the pic
If you "hold" the button, yr X1 will call the exe program specified in this registry. X1 stock rom does not comes w/ any VC program and you have to install one yrself. Of course, if you put in other program like Core player, it will be start if you hold the button.
Click to expand...
Click to collapse
pearls before swine mate....
there are some new members on here lately who need to learn that when a more ePerienced member gives them advice they arent doing it because they like the sound of their own voice
at45 theres a good reason why people keep saying read and search, and quite a lot of it is to do with the attitude you've shown here.here.

Thanks guys!!!
I've been looking for this for quite a while. Really Thanks! Now just need to try to map this button as next rack in Mortplayer...If i found the way, I'll post it here!

Wait, I'm being criticised for being rude and not searching?
fards said:
at45 theres a good reason why people keep saying read and search, and quite a lot of it is to do with the attitude you've shown here.here.
Click to expand...
Click to collapse
Firstly, where have I been rude? Secondly, this has nothing to do with searching. I would challenge you to find a single thread on this subject anywhere else on the whole internet, started before this one. If you're going to criticise at least make some of the criticism partially relevant.
Jackleung, thanks for the solution, but in response to your manner, if you post an arbitrary reg key (a key which has no logical connection to the described solution) and which doesn't work if the instructions are followed (due to the wrong syntax), you should expect for that solution to be met with scepticism.

Coming bach to the original topic:
I wrote a script (thanks, Mort!) that enebles the tap&hold (2-3sec) of the Microphone Button to jump to the next track in Mortplayer (if it is running).
Just copy the two files attached to the \Windows\ directory and change the Registry entry as descibed in Post #5 to
Registry said:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\Path = "\Windows\MP-NT.exe"
Click to expand...
Click to collapse
Thats it. Run Mortplayer and give it a try, works perfect for me!
Edit: script is working!

derliebewolf said:
I wrote a script (thanks, Mort!) that enebles the tap&hold (2-3sec) of the Microphone Button to jump to the next track in Mortplayer (if it is running).
Click to expand...
Click to collapse
Hey, thanks a lot!
It seems I will install MortPlayer on my X1. Or is there a possibility to do the same with the media panel?
PS: In the script you write "not yet working". Is that the correct file?

scl_electronics said:
I found it easier just to re-direct the Soft Buttons!!
Left for Voice Command, Right for Comm Manager
Stuart
Click to expand...
Click to collapse
Can you tell me where in the settings you change soft buttons. Is it Settings/Buttons? I am not sure what the 6 buttons represent. I have searched for an explanation but haven't found one.
Thanks

ruddsamuppet said:
Can you tell me where in the settings you change soft buttons. Is it Settings/Buttons? I am not sure what the 6 buttons represent. I have searched for an explanation but haven't found one.
Thanks
Click to expand...
Click to collapse
There are two different ways for the X1, to remap the soft keys. One is via the button settings in the windows settings, which is a global override which causes the buttons not to behave as softkeys anymore, and the other is via registry setting (have a look into the Wiki here), that maps specific applications to the softkeys while in today view - this way, the softkeys stay available in all other applications. I personally prefer the last approuch, because I don't like fingerprints on my screen.

Cab is There!!
estartu said:
PS: In the script you write "not yet working". Is that the correct file?
Click to expand...
Click to collapse
oops, corrected now I got a cab, thanks to AlejandroFefe of ppc-welt.info!
No, this only works with mortplayer as you need the possibility to change the track via an exe file or at least an exe with a parameter (like in my script)...If you find a way to do this with the media panel (which i doubt you will ) we could have it...otherwise not.

Topic continued here: http://forum.xda-developers.com/showthread.php?t=471317

other remote controle
hi derliebewolf,
is ist possible to parse the keypress of other remotes ? the remote of a nokia n95 would be perfect ! did you write the mp-nt.exe ? how did you manage to parse the keypress of the stock headset.
regards
t.

[REQ] Registry help with Diamond2 GSensor

I'm working witht he Diamond 2 Gsensor sdk on my Diamond and I have been able to successfully add string values to the whitlist section in the gsensors registry. (HKCU\Software\HTC\HTCSENSOR\Whitelist)
The whitelist values enable rotation. My question is how can I create a "Blacklist" so to speak that would contain values for apps I dont want rotated? Is it possible? If so is it as easy as crating the said paths?

Anybody?...

powe6563 said:
I'm working witht he Diamond 2 Gsensor sdk on my Diamond and I have been able to successfully add string values to the whitlist section in the gsensors registry. (HKCU\Software\HTC\HTCSENSOR\Whitelist)
The whitelist values enable rotation. My question is how can I create a "Blacklist" so to speak that would contain values for apps I dont want rotated? Is it possible? If so is it as easy as crating the said paths?
Click to expand...
Click to collapse
I have not tried this yet myself but i would guess, and tell me if im wrong, that the only time it will rotate is if the app is in the white list if its not in the white list then it will not rotate.

irus said:
I have not tried this yet myself but i would guess, and tell me if im wrong, that the only time it will rotate is if the app is in the white list if its not in the white list then it will not rotate.
Click to expand...
Click to collapse
Well this is true, however, the whitelist uses class names to determine what apps to rotate. The class name "dialog" refers to multiple apps like the phone dialer, call status, sms composer, and more. So when I add "dialog" in the whitelist it rotates all of these. I would like to try and make an exception list that uses the process name or window name as the identifyer. That way I could have dialog in the whitelist and cprog.exe in the exceptions or blacklist key. It may not be possible but thats what I'm asking I guess.

bump... c'mon guys theres gotta be an answer to this.

I found this in http://www.htcmania.com/showthread.php?t=36214
is in spanish.
[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\M oduleName]
"Album"="\\Windows\\HTCAlbum.exe"
"Calculator"="\\Windows\\htcCalculator.exe"
[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\W hiteList]
"TestHTCSensorDemoAP"="TESTHTCSENSORDEMOAP"
"Album"="HTCAlbumClass"
"Calculator"="CalculatorMain"
"Opera"="Opera_MainWndClass"
"SMS"="Dialog"
"Calendar"="Calendar"
"FileExplorer"="FEXPLORE"
"PROGRAM"="Explore"
"IExplore"="IExplore"
"Manila"="Manila"

vengadorhq said:
I found this in http://www.htcmania.com/showthread.php?t=36214
is in spanish.
[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\M oduleName]
"Album"="\\Windows\\HTCAlbum.exe"
"Calculator"="\\Windows\\htcCalculator.exe"
[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\W hiteList]
"TestHTCSensorDemoAP"="TESTHTCSENSORDEMOAP"
"Album"="HTCAlbumClass"
"Calculator"="CalculatorMain"
"Opera"="Opera_MainWndClass"
"SMS"="Dialog"
"Calendar"="Calendar"
"FileExplorer"="FEXPLORE"
"PROGRAM"="Explore"
"IExplore"="IExplore"
"Manila"="Manila"
Click to expand...
Click to collapse
Thanks, I have that much so far but I'm still looking for a way to specify between cprog and tmail in the whitelist because they both use Dialog as a class name. Thanks for the effort though

can someone make it cab file?

powe6563 said:
Thanks, I have that much so far but I'm still looking for a way to specify between cprog and tmail in the whitelist because they both use Dialog as a class name. Thanks for the effort though
Click to expand...
Click to collapse
Did you try:
HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\M oduleName]
"Album"="\\Windows\\HTCAlbum.exe"
"Calculator"="\\Windows\\htcCalculator.exe"
"SMS"="\\Windows\\tmail.exe"
[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\W hiteList]
"TestHTCSensorDemoAP"="TESTHTCSENSORDEMOAP"
"Album"="HTCAlbumClass"
"Calculator"="CalculatorMain"
"Opera"="Opera_MainWndClass"
"SMS"="Dialog"
Seems logical to me. But as always the logical thing isn't the right choice by definition.
One tip though, if you want to know something, just try! That's the way other people get their knowledge about these things....
And afterwards, please share your results with the rest of the world ofcourse!

rondol1 said:
Did you try:
HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\M oduleName]
"Album"="\\Windows\\HTCAlbum.exe"
"Calculator"="\\Windows\\htcCalculator.exe"
"SMS"="\\Windows\\tmail.exe"
[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\W hiteList]
"TestHTCSensorDemoAP"="TESTHTCSENSORDEMOAP"
"Album"="HTCAlbumClass"
"Calculator"="CalculatorMain"
"Opera"="Opera_MainWndClass"
"SMS"="Dialog"
Seems logical to me. But as always the logical thing isn't the right choice by definition.
One tip though, if you want to know something, just try! That's the way other people get their knowledge about these things....
And afterwards, please share your results with the rest of the world ofcourse!
Click to expand...
Click to collapse
I've tried, negative...

dingil said:
I've tried, negative...
Click to expand...
Click to collapse
Same here. I still havent figured out a way around this.