If you push the button on the microphone which comes with the X1, it answers a call. If you push it twice it seems to call the last person you called.
Is there a way to use this button to invoke the Voice Command monitor?
Thanks
I found it easier just to re-direct the Soft Buttons!!
Left for Voice Command, Right for Comm Manager
Stuart
Yep, that's exactly what I have. Best set-up by far.
But when in the car, it would be easier to use the mic button, so I'd like to double up on Voice Command access.
So.. no-one else has managed this either?
at45 said:
So.. no-one else has managed this either?
Click to expand...
Click to collapse
Take a look at here:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
I am going to include Cyberon VC 2.0 in my rom but it will be Cantonese since it's my native language.
So, to recap the request was for a way to use the Microphone button as the Voice Command button...
jackleung said:
Take a look at here:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
Click to expand...
Click to collapse
What is this goint to change? I searched the registry for a way to use th mic-headset-button as a remote for my X1...which means to map a button, application, etc to it. Is this the way to do so?
derliebewolf said:
What is this goint to change? I searched the registry for a way to use th mic-headset-button as a remote for my X1...which means to map a button, application, etc to it. Is this the way to do so?
Click to expand...
Click to collapse
Beside the "push once', and "double push", a "push & hold" action will call this exe such as Voice commander in my example.
jackleung said:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
Click to expand...
Click to collapse
But this doesn't have anything to do with the microphone button.
Do you read? Of course it does if you are talking about the button in the pic
If you "hold" the button, yr X1 will call the exe program specified in this registry. X1 stock rom does not comes w/ any VC program and you have to install one yrself. Of course, if you put in other program like Core player, it will be start if you hold the button.
jackleung said:
Do you read? Of course it does if you are talking about the button in the pic
If you "hold" the button, yr X1 will call the exe program specified in this registry. X1 stock rom does not comes w/ any VC program and you have to install one yrself. Of course, if you put in other program like Core player, it will be start if you hold the button.
Click to expand...
Click to collapse
pearls before swine mate....
there are some new members on here lately who need to learn that when a more ePerienced member gives them advice they arent doing it because they like the sound of their own voice
at45 theres a good reason why people keep saying read and search, and quite a lot of it is to do with the attitude you've shown here.here.
Thanks guys!!!
I've been looking for this for quite a while. Really Thanks! Now just need to try to map this button as next rack in Mortplayer...If i found the way, I'll post it here!
Wait, I'm being criticised for being rude and not searching?
fards said:
at45 theres a good reason why people keep saying read and search, and quite a lot of it is to do with the attitude you've shown here.here.
Click to expand...
Click to collapse
Firstly, where have I been rude? Secondly, this has nothing to do with searching. I would challenge you to find a single thread on this subject anywhere else on the whole internet, started before this one. If you're going to criticise at least make some of the criticism partially relevant.
Jackleung, thanks for the solution, but in response to your manner, if you post an arbitrary reg key (a key which has no logical connection to the described solution) and which doesn't work if the instructions are followed (due to the wrong syntax), you should expect for that solution to be met with scepticism.
Coming bach to the original topic:
I wrote a script (thanks, Mort!) that enebles the tap&hold (2-3sec) of the Microphone Button to jump to the next track in Mortplayer (if it is running).
Just copy the two files attached to the \Windows\ directory and change the Registry entry as descibed in Post #5 to
Registry said:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\Path = "\Windows\MP-NT.exe"
Click to expand...
Click to collapse
Thats it. Run Mortplayer and give it a try, works perfect for me!
Edit: script is working!
derliebewolf said:
I wrote a script (thanks, Mort!) that enebles the tap&hold (2-3sec) of the Microphone Button to jump to the next track in Mortplayer (if it is running).
Click to expand...
Click to collapse
Hey, thanks a lot!
It seems I will install MortPlayer on my X1. Or is there a possibility to do the same with the media panel?
PS: In the script you write "not yet working". Is that the correct file?
scl_electronics said:
I found it easier just to re-direct the Soft Buttons!!
Left for Voice Command, Right for Comm Manager
Stuart
Click to expand...
Click to collapse
Can you tell me where in the settings you change soft buttons. Is it Settings/Buttons? I am not sure what the 6 buttons represent. I have searched for an explanation but haven't found one.
Thanks
ruddsamuppet said:
Can you tell me where in the settings you change soft buttons. Is it Settings/Buttons? I am not sure what the 6 buttons represent. I have searched for an explanation but haven't found one.
Thanks
Click to expand...
Click to collapse
There are two different ways for the X1, to remap the soft keys. One is via the button settings in the windows settings, which is a global override which causes the buttons not to behave as softkeys anymore, and the other is via registry setting (have a look into the Wiki here), that maps specific applications to the softkeys while in today view - this way, the softkeys stay available in all other applications. I personally prefer the last approuch, because I don't like fingerprints on my screen.
Cab is There!!
estartu said:
PS: In the script you write "not yet working". Is that the correct file?
Click to expand...
Click to collapse
oops, corrected now I got a cab, thanks to AlejandroFefe of ppc-welt.info!
No, this only works with mortplayer as you need the possibility to change the track via an exe file or at least an exe with a parameter (like in my script)...If you find a way to do this with the media panel (which i doubt you will ) we could have it...otherwise not.
Topic continued here: http://forum.xda-developers.com/showthread.php?t=471317
other remote controle
hi derliebewolf,
is ist possible to parse the keypress of other remotes ? the remote of a nokia n95 would be perfect ! did you write the mp-nt.exe ? how did you manage to parse the keypress of the stock headset.
regards
t.
Related
Hi,
I was messing with the beta of the mozilla web browser the other day (it is on the ftp site, but I wouldn't bother with it yet!) and I noticed that it let you use the volume slider to scroll the page like a scroll wheel.
Sadly in the normal apps like IE and email it just changes the volume.
Does anyone know if there is any way to make the slider act as a scroll wheel in these apps? It is a standard thing on many pocket pcs and would be wonderful if you could use it whilst reading emails.
Cheers
Marc
Yeah that would be really useful for email and webbrowsing (eg. Avantgo). Anybody know how? Might be a registry hack.
Yes there is a volume slider re-mapper. I use it on my Blue Angel. Got it off a thread on one of the forums here. Keep searching
Of course it's possible.
Here is a page where I explain how to do it but I'm sorry it's in french :?
If needed I will translate it... :?:
DocteurN said:
Of course it's possible.
Here is a page where I explain how to do it but I'm sorry it's in french :?
If needed I will translate it... :?:
Click to expand...
Click to collapse
No need, great with google :lol:
http://tinyurl.com/ascnn
It was without counting on the ingeniousness of a Russian developer Mamaich which developed small a software to associate this button any software and in particular 2 small softwares making it possible to emulate a serrated roller of run!
Click to expand...
Click to collapse
To emulate a serrated roller of run
--------------------------------------------------------------------------------
It is now possible to use the slider as serrated roller to ravel inside the applications.
Click to expand...
Click to collapse
:lol: I love google language tools!
Hey that right, the translation isn't so bad :wink:
2 points : you've got to copy
- 'unmap_volume.exe' and 'AddHotkeys.exe' in the repertory /Windows/Start
- 'SimUp.exe' and 'SimDown.exe' in the repertory /Windows/Starting Menu/Programs
Thanks again to Mamaich
Works great! Thanks!!!
I just noticed that starting from 1.11 ROM it allows to remap up-down volume buttons for any purpose how great!
P.S. e.g. it works in Betaplayer, HaaliReader, Resco AudioRecorder
PHM Task Manager doesn't seem to kill the processes in order to uninstall AddHotkeys.exe....any suggestions?
You have to use activesync "explore" feature to change the extension to something else (eg. addhotkeys.ex1). Then, soft reset, and it will say that it can't be run. Then delete it!
Guys, I've made a generic keypress app. I'm sure one exists elsewhere in the world, but I wrote mine.
It can be used to send any virtual key from the command line.
So you could set up a shortcut eg
VJKeyPress.exe 93
will show the "context menu" for the current app.
91 will show the start menu.
27 is the escape key.
Check it out on my website, www.vijay555.com
Don't forget to click on an ad or make a donation!
EDIT - 19.04.06: added -cut, -copy, -paste.
V
Great ! Very useful !
I was wondering whether it is possible to activate/desactivate the GPRS with your keypress app ? :?:
Hmm, never thought about it. Are there no hacks already around for this?
If not, stick a request on my forum on my website and I'll try to get around to it if no one else does.
V
No, never find a hack for this...
Ok, I'm going to write a request on your forum for this :wink: thanks !
DocteurN said:
Great ! Very useful !
I was wondering whether it is possible to activate/desactivate the GPRS with your keypress app ? :?:
Click to expand...
Click to collapse
Are you looking for this app? http://forum.xda-developers.com/viewtopic.php?t=33313&highlight=gprs+disconnect
cktlcmd - I don't think that's quite what he wants. He wants an executable that will disconnect from GPRS.
If no one else comes up with one, I should be able to write one.
V
Thanks for the link :wink:
Unfortunately, this is not what I'm looking for...
I'm looking for a little software that can be launch by a shortcut (or directly) in SPB Pocket+ or XBar that can activate/descativate GPRS Connexion.
vijay > Sorry I didn't see your post
vijay555 said:
cktlcmd - I don't think that's quite what he wants. He wants an executable that will disconnect from GPRS.
If no one else comes up with one, I should be able to write one.
V
Click to expand...
Click to collapse
Cool! Good enough for me.
Hi ViJAY555,
iam searching for a tool where i can easily copy stuff to the clipboard. I have seen this at my trial of Wisbar Advanced that i can configure each item in the taskbar to open a clipboard menu to copy and paste stuff.
Iam wondering for a long time why this is not possible also on the PDAs likley on the PC you pressing CTRL-C and CTRL-V.
The life would be much easier... I thought on your VJKEYPRESS but havent found any key for that. Maybe you know another tool whith this functionality?
topcaser: I believe the PHM Key tools includes this function.
I will be developing something to help with the clipboard, it's coming together slowly
V
vijay555 said:
topcaser: I believe the PHM Key tools includes this function.
I will be developing something to help with the clipboard, it's coming together slowly
V
Click to expand...
Click to collapse
V,
do you have a link to the phm key tools. I googles already - not with much luck.
but i think, that you will hack anyway a good solution. In my opinion having a hardware key to copy and paste things is a great added value.
Topcaser - I don't have a link with me. I think they're posted on the forum somewhere. If we get stuck, I'll post it from home later. If we get really stuck I'll make a new app
V
Guys, I've added -cut, -copy, -paste command lines.
V
vijay555 said:
Guys, I've added -cut, -copy, -paste command lines.
V
Click to expand...
Click to collapse
V,
good work - thanx for this application.
vijay555 said:
Guys, I've added -cut, -copy, -paste command lines.
V
Click to expand...
Click to collapse
and can you check the compatibility on wm5, please?
this app is what i nead but it doesnt work when assigned to a hw button
thanks a lot
Just tried www.phm.lu/Products/PocketPC/Keys/ on my Universal. Copy, Paste work fine! I use Record button for call both.
Alex
Yeah, PHM keys is better. PHM uses a weird API command that I can't get to work properly yet. Need to waste some more time on it when I get some time. But yes, PHM is definitely better for copy/paste.
V
vijay555 said:
93 will show the "context menu" for the current app.
91 will show the start menu.
27 is the escape key.
Click to expand...
Click to collapse
how can I set shortcut on "broken bar" (|, u+00A6 in character table)?
thanx in advance
What's the code for the "OK" button (Or something which would do the same thing)? It's next to the space bar on the Wizard, I couldn't see it on your site.
Many thanks.
Don't worry: 'VJOkButt'
I see the hotvoice.exe in the /Windows directory, but it doesn't seem to run for me... nor does it show up as a valid Button assignment. It worked fine on my 8125... did Cingular not include this in the ROM?
hotvoice.exe was linked as the Record button on the 8125. I can launch Notes and voice record from there, I just wanted a more direct way to get there.
Is there a way for me to copy it from my 8125?
Thanks,
Mike
zim2dive said:
I see the hotvoice.exe in the /Windows directory, but it doesn't seem to run for me... nor does it show up as a valid Button assignment. It worked fine on my 8125... did Cingular not include this in the ROM?
hotvoice.exe was linked as the Record button on the 8125. I can launch Notes and voice record from there, I just wanted a more direct way to get there.
Is there a way for me to copy it from my 8125?
Thanks,
Mike
Click to expand...
Click to collapse
What ROM are you on? If you do not use PTT, using the leaked Cingular 2.06 ROM then you can do the following. Remap one of your buttons to the app. You must create a shortcut to it first so that it shows up in the app list when you try to remap buttons. If you do not want to change your normal buttons try Sleuth's PPTFix to use the PTT button to launch the app.
I'm still working thru the info here as a newbie to the ROMS...
My Device info says ROM 1.34.502.1, however I'm not sure that corresponds to the general #'s I see flying around (I have read the Wiki, and while there's a lot of good info, its also written with a lot of assumption that you already know a lot of the lingo)....
Anyway, I have tried linking to the app from the Programs folder..and that link does show up in the Buttons list... but I can't get the app to launch, period
Mike
zim2dive said:
I'm still working thru the info here as a newbie to the ROMS...
My Device info says ROM 1.34.502.1, however I'm not sure that corresponds to the general #'s I see flying around (I have read the Wiki, and while there's a lot of good info, its also written with a lot of assumption that you already know a lot of the lingo)....
Anyway, I have tried linking to the app from the Programs folder..and that link does show up in the Buttons list... but I can't get the app to launch, period
Mike
Click to expand...
Click to collapse
OK, you've got the stock ROM, look for and install Sleuth's PTTFix, create a shotcut to Hotvoice.exe on your 8525, and map the PTT button to the hotvoice app. It will only show after creating the shortcut in \Windows.
I've installed the PTTfix and the PTT button works fine. While this gives me extra buttons, this shouldn't be needed, should it? (ie. any reason why I can't assign Record to buttons 1-4?)
But hotvoice.exe will not launch.. I cannot launch it from the file explorer either.
Given that Record does not show up in the default list of buttons (as it does on the 8125), it seems like it doesn't work, at least not in the default ROM??
Mike
zim2dive said:
I've installed the PTTfix and the PTT button works fine. While this gives me extra buttons, this shouldn't be needed, should it? (ie. any reason why I can't assign Record to buttons 1-4?)
But hotvoice.exe will not launch.. I cannot launch it from the file explorer either.
Given that Record does not show up in the default list of buttons (as it does on the 8125), it seems like it doesn't work, at least not in the default ROM??
Mike
Click to expand...
Click to collapse
Yes, you can change them to whatever you wish, I was just providing another suggestion. I prefer to leave my standard buttons as they are.
Ok, so the basic problem is that it appears that hotvoice.exe does not execute on my Hermes (regardless of button assignment)
I guess the question is whether or not it is supposed to run on my stock ROM? and/or if there is a way to add it.
Thanks,
Mike
zim2dive said:
Ok, so the basic problem is that it appears that hotvoice.exe does not execute on my Hermes (regardless of button assignment)
I guess the question is whether or not it is supposed to run on my stock ROM? and/or if there is a way to add it.
Thanks,
Mike
Click to expand...
Click to collapse
You need a shortcut that calls MSVOICE ( I found this in one of Sleuth's threads)... See below for link to shortcut... Note: you must copy it to \Windows\Start Menu\Programs and map one of your buttons 1-4 to it. I read it will not work on button 5, so if you need to launch an app that you had mapped to its original button, you can remap that to 5 if needed. Note also that you will have a Record icon in programs, it doesnt work if you try to launch it from Programs, only by assigning to a button.
Get it here: http://forum.xda-developers.com/attachment.php?attachmentid=31341&d=1163177903
Weird.. I thought I had tried exactly that, about 5 times
But since it ain't broke no more, I'll stop trying to fix it.
Many thanks for your help!!
Mike
zim2dive said:
Weird.. I thought I had tried exactly that, about 5 times
But since it ain't broke no more, I'll stop trying to fix it.
Many thanks for your help!!
Mike
Click to expand...
Click to collapse
No problem, I found that the difference is in how the shorcut is made. If you look at the content by opening it with Wordpad on your PC for example... you can see differences in the shortcuts... some ppl where making shortcuts to hotvoice.exe and renaming the shortcut to Record.lnk, some were renaming wrong... but this works for sure.
hotvoice.exe not working
Mike & ercave1, I'm also looking into usign the hotvoice.exe. I have the new ROM, even downloaded the shortcut link and nothing happens. Via Resco Explorer, I first unhide the files to view hotvoice.exe. there I find the hotvoice.exe which is 3K, and hotvoice.lnk (14B) I create a new shortcut from the .exe to the start menu. Nothing happens, I used the shortcut that ercave1 recommended and nothing. Looks like the hotvoice.exe in the Cingular 8525 new ROM and perhaps original ROM does not work or is corrupted. Looking at the attributes, hotvoice.exe shows the following: Read-Only, Hidden, System, ROM. Any help would be greatly aprreciated.
kiwikenji said:
Mike & ercave1, I'm also looking into usign the hotvoice.exe. I have the new ROM, even downloaded the shortcut link and nothing happens. Via Resco Explorer, I first unhide the files to view hotvoice.exe. there I find the hotvoice.exe which is 3K, and hotvoice.lnk (14B) I create a new shortcut from the .exe to the start menu. Nothing happens, I used the shortcut that ercave1 recommended and nothing. Looks like the hotvoice.exe in the Cingular 8525 new ROM and perhaps original ROM does not work or is corrupted. Looking at the attributes, hotvoice.exe shows the following: Read-Only, Hidden, System, ROM. Any help would be greatly aprreciated.
Click to expand...
Click to collapse
How are you accessing the .lnk? Use the shortcut from the zip file.
You must place it in \Windows\Start Menu\Programs (this makes it visible in the button map app)
Then remap one of your buttons 1-4 to Record. Soft Reset.
I applied this today on my 8525 without a problem.
Yes, i unzipped the link from the file i downloaded, then i transferred it to the start menu. No luck on that. I also have a program called SKTools and there is an option to configure the 5 buttons of the 8525. It allows me to browse by file or by Alias. I noticed one of the ALIAS is :MSHOTVOICE. I tried that ALIAS along with another called :MSVOICE to no avail (I did a reset BTW). Do you have the new ROM or the original cause im not getting this hotvoice to work at all.
kiwikenji said:
Yes, i unzipped the link from the file i downloaded, then i transferred it to the start menu. No luck on that. I also have a program called SKTools and there is an option to configure the 5 buttons of the 8525. It allows me to browse by file or by Alias. I noticed one of the ALIAS is :MSHOTVOICE. I tried that ALIAS along with another called :MSVOICE to no avail (I did a reset BTW). Do you have the new ROM or the original cause im not getting this hotvoice to work at all.
Click to expand...
Click to collapse
Don't understand what is happening I will try and create a cab to install this... I'm on the 2.06 PTT enabled ROM, but that should not matter...
Record cab
For those having problems creating the shortcut try this...
Install the CAB, then navigate to Start>Settings>Buttons then select one of the four buttons to modify and set it to Record, tap OK and test the button.
Let me know how it goes.
That fixed it for me.
Thanks.
berdinkerdickle said:
That fixed it for me.
Thanks.
Click to expand...
Click to collapse
You're welcome, glad it works!
Glad it worked for you, unfortunately it's not working for me. There must be a thrid party application or setting that must of corrupted the hotvoice.exe. Next time I do a hard reset, I'll give it a try. Thanks again ercave1 for your help.
Hi guys, I am new to this forum but have read and benefitted from some of your posts.
Zim,
Not sure if this is what you are looking for, but the Notes app is setup to do voice records on the 8525. I will grant you this... there are absolutely NO instructions about it in the manual so I had a hell of a time finding it, but through looking around I finally discovered this.
Just open Notes and then click Menu>Show Recording Toolbar. Now you can record voice records all you want and it puts them in your notes folder for review.
Then, of course, you can map any of your buttons 1-4 to the Notes app and, since you selected to show the recording toolbar, all you do is press the mapped button and then "New" and speak.
Hope this helps (someone).
JWP
ercave1 said:
For those having problems creating the shortcut try this...
Install the CAB, then navigate to Start>Settings>Buttons then select one of the four buttons to modify and set it to Record, tap OK and test the button.
Let me know how it goes.
Click to expand...
Click to collapse
cool thanks, this seemed to help.
it is odd for me the record short cut will not work directly but if map the button to it, it will work and as long as you hold the button in. it keeps recording till you are out of time.
as jwpetree said the the other way to use the recorder is to open notes 1st.
now to find a tweak to give more recording time.
I have the Softkey program already.... and I am guessing that the recent calls are part of the phone program and that there probably isn't a separate exe for it... but if anyone knows how to pull up the call list I would really appreciate it. Everyone ignores me on here and I know it's the cool thing to do but you could be an awesome trend setter by throwing me a bone!
=)
Try this. It's work for me.
Thanks dude... really appreciate it... trying to figure out how to make it show up as an option in Softkey... tried putting it in program files, didn't work... so now trying the Windows dir.
Nevermind, used a diff. soft key app that allows you to choose program path... works like a charm, I am in your debt!
skanndelus said:
Nevermind, used a diff. soft key app that allows you to choose program path... works like a charm, I am in your debt!
Click to expand...
Click to collapse
I been trying to get one of my buttons to get me to the call history my self...
Can you please explain what you did to get it to work?
Envycycles said:
I been trying to get one of my buttons to get me to the call history my self...
Can you please explain what you did to get it to work?
Click to expand...
Click to collapse
- Download the CallHistory.zip from Post number two
- Extraxt the CallHistory.exe anywhere to your pda (memory or storagecard)
- Now search for Remap Softkeys on google and install the cab file on your pda
- When installed open it and change the path of the left softkey with the CallHistory.exe
I tried 5 different callhistory.exe and this is the first one that actually brought up the history and not the dialer. Thanks!
I have a Sprint Touch and it only has one hardware button that is customizable. I was hoping with HButton I would be able to map the Send and End key if I pressed and held these buttons to do different tasks.
Is this possible with this program? If not, is there a way to do it?
I think you might be in luck....
Ten minutes ago, I wouldn't have been able to answer this question, but having just read this post, I can safely say that this is the way to do it!!!
Hope it works for you
Mark.
fowen said:
I have a Sprint Touch and it only has one hardware button that is customizable. I was hoping with HButton I would be able to map the Send and End key if I pressed and held these buttons to do different tasks.
Is this possible with this program? If not, is there a way to do it?
Click to expand...
Click to collapse
Read the Button Enhancer Bible, it explains everything, all the alternative apps etc: http://wiki.xda-developers.com/inde...ton config tips for Opera Mobile & Mini users
just check this link for a cab file: http://forum.xda-developers.com/showthread.php?t=356192
Mark Crouch said:
Ten minutes ago, I wouldn't have been able to answer this question, but having just read this post, I can safely say that this is the way to do it!!!
Hope it works for you
Mark.
Click to expand...
Click to collapse
Ill check into this and see if this works for The Touch. Thanks!
Menneisyys said:
Read the Button Enhancer Bible, it explains everything, all the alternative apps etc: http://wiki.xda-developers.com/inde...ton config tips for Opera Mobile & Mini users
Click to expand...
Click to collapse
I read through it and I think I read that assigning the end and send key wasn't possible in most devices which doesn't make me happy.
patr!k said:
just check this link for a cab file: http://forum.xda-developers.com/showthread.php?t=356192
Click to expand...
Click to collapse
I already have the HTC End Key App installed by default but it only has a few options. I don't see where you can edit the button to open a application.
fowen said:
Ill check into this and see if this works for The Touch. Thanks!
I read through it and I think I read that assigning the end and send key wasn't possible in most devices which doesn't make me happy.
I already have the HTC End Key App installed by default but it only has a few options. I don't see where you can edit the button to open a application.
Click to expand...
Click to collapse
Actually the "Bible" also mentions AE Button Plus. This will allow mapping of almost any key including a long/short press for both the send & end keys.
It's a retail proggy, don't remember the cost, but I have a fairly new Beta version if you want to give it a go & test it . PM me for details if you wish.
This is for a different phone and you may not have the same files/configs, but hell, might be worth a try.
http://forum.xda-developers.com/showthread.php?t=356322
Posted in the Kaiser forum.