I cant get active sync 4 and WM5 to sync over bluetooth?
can anyone point me in the direction of help?
Cheers
Benno
i am using Widcomm bluetooth 3.0.1.913
Hi i have imate ppc (xda II) with WM2003 se i opened bluetooth then i bonded the device to my desktop i set the in/out bond, i set active sync on my pc to accept bluetooth connection. The problem is when i open Activesync on my pda then tools then connect via bluetooth nothing happened!!!!!
Note . when i was using WM2003 i do the same procedure and bluetooth was opening and i can do activesync via bluetooth.
Does any one have an idea of the difference between activesyc via bluetooth on WM2003 and WM2003 se .
I've got the latest iMate rom with the push email installed on my Vario. Have started to notice that after disconnecting from either ActiveSync or Bluetooth that my Vario requires a soft reset to receive and make calls or to access the Internet or download email via gprs.
Anyone else had this problem?
active sync via bluetooth
I have latest ROM and since that no longer can connect to active sync which I was able to before. I am able to connect to my car and headset.
I'd love steps--It doesn't give me active sync as a choice when I try to connect to computer from 8125 active sync using bluetooth. Only service listed is WIRELESS STEREO.
anythoughts would be appreciated
Hi to all.
Have any of You experience with connecting TyTN to more sophisticated bt carkit. Mine connects perfectly to my simple motorola carkit but does not want to connect to Parrot 3100 at all.
Hi varden,
There are some issues with tytn an parrot CK connection. As it is discussed on this thread, Parrot is aware of the problem and say they are waiting for a tytn unit to test it and solve the problems.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
Regards.
Do You know of any other working carkit with an LCD and contacts importing?
My Audi BT carkit doesn't work with the TyTN,
It connects and stays connected for about 5 minutes, then it randomly disconnects and reconnects and sometimes just disables the BT on the TyTN :evil:
I have no troubles using my Lexus car kit for making calls, but I cannot for the life of me figure out how to transfer contacts from the TyTN to the car address book
Just tried my Orange SPV M3100 with my Audi A4 BT carkit, and it all appears to work fine so far.
To the Lexus guy, most in built car kits I have come accross have the ability to read the contacts off the SIM card. As this is a standard format, car manufactureres don't have to worry about accessing contacts from Symbian, Windows Mobile, Nokia etc etc etc. With my Audi, the first time it connects via Bluetooth, it reads all the contacts from the SIM card. (Note: if you already have a Bluetooth connection created, you will have to delete it and then re-create it to initiate the SIM download bit).
This maybe different on your Lexus, but the mechanism should be explained in your manuals somewhere. If not, Lexus dealers are reknowed for being very helpful, why not try them!
Markee
CK 3000?
Does anyone have any experience with the TyTN and the simpler CK 3000 kit?
I use my TyTN with a sony ericsson bluetooth car-kit. It works perfect at the moment. I didn't use it much yet, but it works very well. the TyTN connects much faster then my previous Eten M600
Does anybody have the Tytn work with a Lexus Bluetooth carkit?
If yes - is the phonebook transferred to the carkit?
Thank you
TyTN with Parrot RNB
Hello together,
I'm using the MDA Vario II together with a Parrot RNB. Paring, connecting and phone-book synchronising is working quite well. But I have problems with phoning. While synchronising I can't make a call. When I try I don't hear anything (no ring tone and no speech) and my MDA disconnects after some seconds.
After synchronising the phone handling is quite good. I can reach and make calls either with the RNB or with my MDA and the sound quality of my phone partner is very good. The big problem is, that my speech is muted every two seconds for about one second. So my partner has big problems to understand me.
On the RNB I have the latest firmware, which is about one year old and on my MDA I have the ROM Version: 1.21.111.3 and the Radio Version: 1.05.02.00
Does anyone have some hints for me to solve the problems?
Greetings Pudl
Phonebook transfer to Lexus now works
Finally managed to send contacts over to my LS430 from my Hermes (Cingular 8525).
How you ask?
WM6!
It has an updated bluetooth stack that now interoperates properly.
Finally.
@Mandingo,
How did you achieve this, i just picked up my RX350 and i already have WM6 on my Hermes, but i can only send 1 contact at a time to the car, and it's becoming painful, i wish there was some way i could select all contacts and then send via bluetooth?
if you go to http://www.jetwaremobile.com/ you can download their cab file, then install it and you can push all the contacts over in 1 go.
Paul
I have a BMW with bluetooth phone kit (official BMW!) and i couldn't use it with me Symbian phone... Now i have a TyTN and all works great
I stopped using sync on my TyTN with my CK3300. Instead I exported all my contacts from Outlook with the Parrot App, and pushed them over bluetooth to the kit.
You need to select the SonyEricsson K800 NO SYNC when pairing the TyTN so it doesn't sync. The advantages with this is that you can use the dual keyword (name then home/work/mobile) instead of the default sync that just puts all numbers in one long list.
Parrot CK3000
I am using a TyTn with a simply Parrot 3000. It works well. If you have a problem with it, reset the Parrot.
Hi all,
I use a Bluetooth carkit with automatic phonebook sync (each time the phone connects) which takes quite long. The carkit cannot be used while syncing, so I was wondering... is there a way (perhaps with a tool) to completely disable the phonebook transfer by Bluetooth?
The first time the HD connected to the carkit, I was asked if I wanted to allow phonebook transfer. It doesn't matter when I say yes or no, the carkit just starts downloading.
Any help would be appreciated!
Thanks.