Hello peeps,
I've got the following issue with my Atom.
When i remove it from the usb cable (Activesync) it connects automatically to my wireless router.
What is going on?
PS: The Atom has the latest official rom (not the Exec's one).
if you have WIFI turned on, it try to connect to all networks, that it can find.
turn off wifi.
Thanks for the reply.
The WiFi is off, i've double checked it.
bro, if wifi is turned off, it can't connect to any network
I know it sounds weird, but that's the truth!
I have turned off the WiFi and i'm attaching the device to the usb cable. Open ActiveSync, make a backup of my contacts for example. I remove the Atom off the cable and the WiFi turn on alone and connect to my USR9106 wireless router.
yes. it happens to me on my hp6828 as well:
wifi is turned off for sure.
dock to the usb for async wit outlook.
after sync, unplug the usb.
then the wifi starts searching for network and evetually gets connected to my home network.
btw bill, can i chck wit u wat is ur async setting? u can go to start>settings, click on connections tab then active sync mode. u hv 2 settings there: RNDIS sync mode and USB serial, which one is ur setting?
kjskho1 there isn't this option on my Atom.
ok... i suspect it's not device- or manufacturer-specific problem but active sync problem... if i found any result when i google around, will let u know then...
Related
can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin
Hi guys, here's a question for ya's:
Right now, i want to chage my phone via USB, and be conected to my phone's 3g (Three australia) network.
However, because it's connected via ActiveSync, it won't let me...
My idea, is to close ActiveSync, and away i go, but i can't, everytime i end the task, from task manager, it just re-opens straight away..
Do any of you guys know, how i can charge my phone via usb, and connect to a 3g/gprs network? Without resorting to pulling out the usb cable?
go into activesync settings and turn off USB Sync.. tis easy
File > Connection Settings > Allow USB Connections
Lol thanks..
Don't know why i didn't think of that.
I was trying to tether to my laptop today and it seems that my laptop does not see the USB connection. I set my phone to internet sharing and connection of usb and phone as modem I then press connect it goes out and connects to evdo then it says check usb cable connnection. I then plug into my usb cable. Nothing happens except my charging light comes on. I know my phone works as I just tried it out on my co-workers laptop same procedure same cable and it connects without issue. I just downloaded the wmodem.zip installed it same issue. I Also tried to connect it first before I go to internet sharing. It connects to active sync then I start the connection and active sync goes away but I get the same message on my phone "check usb cable connection".
Bluetooth?
I had the same problem with mine and the usb connection. I think it needs drivers. if you look in device manager you might see a device with out drivers. If your buddys works find out what driver it's using..
I just use bluetooth. it works great if you have it.
Figured it out. In my network connections window when my phone would connect it would appear here under LAN or high speed internet connection. but it was in a disabled state so I enabled it and works like a charm.
Thanks for everyones help!
hi guys,
i have a big big problem - i cant sync normally my prophet. As I sync it via bluetooth oftenly it connects to the PC but there is no internet and browsing the phone options. The other and most bad problem is that the same is with the usb cable. even when I disconnect it it crashes the internet connection of the PC and I have to reset the network adapter everytime I disconect my phone. Oftenly I have to plug and unplug the cable to establish normal connection. I have the problem with different roms, using Vista 32x.. Please help .. I cant use my prohpet as it is supposed to
That's not really a problem its natural I have that same problem the PC is just trying to use your phone as a modem for internet access that's all. When connected to PC with your USB cable do you get internet access on your phone? if not you should configure manualy the phones network adapter when connected to active sync. It could work and we both got Vista 32 bit edition on Xp I don't get this disconnecting problem but if u wana sync only then uncheck the option in active sync Alow Data communications I think uncheck that option and your problem will go away ok but doing that ur PC won't share internet access with your Device ok hope you understand
Hi @all,
how can i change the connection sequence in my hd2?
When i connect the usb-cable to my pc, the wifi is changed to off, but i would wifi is connected.
Please Help and sorry for my bad english.
Thx
Norbert
While your phone is in active sync mode (connected to your pc) your pc is sharing its internet connection with the phone so why would you want to have wifi still on?
On working station, the PC Internet connection is blocking, so i want the connection over wifi or gsm.
if you're using windows mobile device centre (I think the same options are there with the old activesync too), with the phone unplugged, choose 'mobile device settings' from the green screen, then 'connection settings'.
Check the 'Allow data connections on device when connected to PC'. The wifi connection should then persist when the phone is syncing
(edit): on the old activesync PC program, it's under File/Connection settings
Thank you, that's it