pls help
I flashed wizard tmobile with jaf wm ,k jam(nk nbf) file after the phone hangs showing i mate ,ipl and spl is 1.03,os 2.16.9.3 what i have to do,please help.
i have tried to up date with t mobile rom again but it shows error utility not coorect for this pda
please help me what i have to do
thx in adv
why no one helping me this is so bad
pls help
Go to bootloader mode by holding down the camera button and pressing reset..release reset while holding camera button. The rainbox screen (tricolor screen) will come out. Then connect it to your USB port and flash it with your desire ROM (I recommend a 1.05 rom). Hopefully this helps.
Clem
thx man even one man given me a reply
thx
Related
hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
biker200 said:
hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
Click to expand...
Click to collapse
Try this:
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
I also had this once when I bodged up a custom ROM and just reflashing with a known good ROM sorted it out, must have been lucky there.
Good luck.
thank you very much what solve the problem is bl update 1.2
thank you very much what solve the problem is bl update 1.2
hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.
hey guys weird thing has happnd to my JasJar firstly the screen is crashed so i cud barel seen anything in dark but thru sunlight i cud see things on my phone
later i installed a rom from here i dont remember wich one it dont get start up it just stucks up at imate screen (that blue color 1) it doesnt go further from that
and no response from my phone pls help as i dont have any mobile right now ... pls help me out guys.. cud i ever make my JasJar live again??? i wish if the phone was on to install the original rom from the webstie or any rom from here to make it work ......
thnks and hoping for a good reply.. fingers crossed...
drift_amit said:
thnks and hoping for a good reply.. fingers crossed...
Click to expand...
Click to collapse
First of all welcome to the forum... and it's not a big deal and for sure your JASJAR will be rocking... ok did you try to flash the rom in XP(it's more easier) did you follow all the steps properly ... if yes try docformat and install another rom... and see wiki for additional informations and instructions....
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
cheers
Rajiv
thnx dude.. but for this my JasJar must b detected by my pc... and i had used it in Xp earlier and now i have vista Installed (any big deal ??)
now while upgrading again wud make it in working???
Yes you can flash in vista
do a search and you´ll find the way!!
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
drift_amit said:
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
Click to expand...
Click to collapse
Ok press the backlight button and power button.. and after that press reset button but still holding both buttons ( backlight & power)... try it few times and you'll succeed... and one more think press the backlight button only and power button only to check if they are working correctly or not ....
Cheers
Rajiv
ok.. now.. by reading other forums and formatting tips of Universal on Vista ... and all other wiki information the original imate rom from the website.. damn it is installing now.,.. and my fingers are crossed .. it is installing and am waiting to finish it
PLZ Help ME PlZ my phone goes to the BOOTLOADER and nothing else happens i cant flash a ROM neither i can use my phn if i press the power button my phn doesnt power on i have to kep the camera button pressed and then press the reset button so i get the boot loader screen if i try the hard reset i.e press the reset button while holding the calling key/END ket its goes to the "smart mobility" screen and nothin happens . . .i have IPL 3.14.0002 and SPL 3.14.cmon on the bootloader screen and USB on the left bottom corner. ..guys plz help Plzzzzzz. . ..while i try to flash a new rom i get a "ERROR 322". .. .. .can u plz help
i also tried diffrent diffrent USPL but it doesnt work even flashing ROM anything i try to do it goes to 2% and i get an Error and the phone goes off
Guys please help me guys i am really in need and would really appreciate your help
i am too having the same problem when i press the power button the screen displays "smart mobility " and nothing and get switched off again else plz help me or tell me how to reset or any other trick to make my mobile come alive
akash.s said:
i am too having the same problem when i press the power button the screen displays "smart mobility " and nothing and get switched off again else plz help me or tell me how to reset or any other trick to make my mobile come alive
Click to expand...
Click to collapse
hi,
can u explain abit when and how it happened//What about the battery status?about ur IPL,SPL ??
battery is in a good condition
ipl 2.20.2220
slp 2.28.0000
please help me one more thing when i am trying to boot from a sd card it shows invalid certificate plz help me
akash.s said:
battery is in a good condition
ipl 2.20.2220
slp 2.28.0000
please help me one more thing when i am trying to boot from a sd card it shows invalid certificate plz help me
Click to expand...
Click to collapse
hi but u have mentioned SPL 3.14 in ur earlier post??.2.28.00 means ur phone may be locked.and u cannot flash other custom Roms,check this link u may get help http://forum.xda-developers.com/showthread.php?t=406721
battery condition means wheather the battery is charged more than 50% ??
bye
try installin hard spl 3.10 and after that install onyx rom.
Your problem may be solved