Does any known how to detect when user press answer button on headset? What event or message generated by system? I find only some event that occurs when user insert headset jack in phone.
The AG service gets a "AT+CKPD=200" message
What i'm interestet in ; How do you send these AT commands ?
I'm sorry, but what is "AG service"?
Audio Gateway.
As far as I remember WM5 has standart API to register AG message handler. WM2003SE and older don't have a standart way.
It's not good. I'm interested in WM2003
Voice Dialing via Bluetooth NOT available on Atom
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Re: Voice Dialing via Bluetooth NOT available on Atom
Camstech said:
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Click to expand...
Click to collapse
Couldn't agree more!
About voice dialer. I thought it was just because Atom needs bluetooth headset button to be pressed for a while to launch dialer. It acts so with wired headset. Unfortunately, i have just one bluetooth headset to play with. And it turns off after 2 sec. holding the button.
On my Dopod 818pro everything acts like a charm (VD runs after a single press), so it isn't a WM5 bug.
can someone enable activating MS Voice Command from a wired headset for WM5?
it would be greatly appreciated.
Thanks,
I have the same problem using a bluetooth headset but if I use the wired headset supplied with my Atom it works fine.
that's good news. so, many OEMs are realizing the importance of this feature. so far, they have it in the Treo 700w and according to you, the Atom.
btw, did you have MS Voice Command pre-installed in your Atom, or did you buy it separately?
thanks,
The talk button on the wired headset is a "fake" button. It generates an special pattern in the recorded audio that it's recognized by the phone application.
It generates an special pattern in the recorded audio that it's recognized by the phone application.
Click to expand...
Click to collapse
Are you sure about that?
I've disembled quite a few headsets and the usual way is to shortcircut the mic-wire with one of the stereo-wires, whitch in return has to be cought by the mainboard and then translated to a command.
I'm not sure, but seems pretty feasible. That button is only used by the phone applicacion, which needs to open the wave input device.
Detecting the button pressing is pretty simple: recording at 16 bits, the average of the absolute value of the samples in complete silence is at least 100, with the talk button pressed, 6 or 7.
My "old" P800 was able to announce who was calling in my Bluetooth headset. After pushing a button on my Bluetooth headset I was able to do voice dialling. It could even pick up the call without pushing a button on Bluetooth headset.
Can wm 2005 on the Prophet do all this?
I have this working on my Jamin without any hacks
Care to share how? I just got a JAMin. No mention of voice dial except by launching program and certainly no mention of BT button. Pairs with my Plantronics M3000 fine but BT button doeas nothing. Any ideas?
Regards
Query to Wardy about Bluetooth Headset & Voice command
Hi Wardy does your Jamin let you control MS Voice command using the button on the BT headset? Or do you have to press the voice command button on the PDA and then talk through the headset?
Voice Command, once it is installed on the Prophet, works just like it did on the Magician. However, the Prophet (at least in Jamin flavor) has an app that lets you create voice tags to control most of it's functions, and this app can be started by using the button on your bluetooth headset (and accepts audio from your bluetooth headset). There are a few limitations, though: you have to create a voice tag for every single item that you want it to launch... and you can't create a voice tag for Voice Command :?. In other words, it is (as far as I'm concerned) completely worthless :evil:
Re: Query to Wardy about Bluetooth Headset & Voice comma
crackerjack said:
Hi Wardy does your Jamin let you control MS Voice command using the button on the BT headset? Or do you have to press the voice command button on the PDA and then talk through the headset?
Click to expand...
Click to collapse
Hi no sorry I am using the supplied voice command software. Its not a problem for me putting voise dial numbers in and I believe it gives better recognition than text to speach. But that's my view
Sorry for what might be a newbie question but .....
just got a v1605 - hermes - and despite what looks like a perfect pairing with my plantronics bluetooth headset, I cannot hear my commands or responses from the voice dialer in the headset - they alwys come out through the PDAs speaker.
Is this a bug or something I can fix
Thanks
Same Problem
I have the MOT H700 BT headset and I cannot hear my confirmation voice dailer commands. Anyone know what the problem is.
Hi, I've read some post on BT and alternative Bluetooth drivers, but I don't understand if something can help me. Here is my problem:
I have an SPV M500 with latest Italian ROM. Then I have a Bluetooth handsfree car kit (Parrot Evolution). I have installed VITO voice dialer on my SPV, and assigned an hardware button to initiate voice recognition for calling.
When in car, with SPV and CAR Kit connected via BT, If I press the PARROT button for Initiate call, nothing happens (I also have an SPV C550 and it works).
So I have to press the assigned button on the SPV, but since it is quite far from my mouth, recognition always fails. With the SPV C550 I thing that my voice is heard from PARROT microphone, and it pass the voice to the phone via BT.
Is there a way to have my M500 working like the C550 ??
I think that any BT headset has the same problem (starting a voice call via headset button) so if anyone solved it I will be happiest man on heart !
Maybe simply an alternative to VITO voice dialer ? Someone tried Microsoft Voice command 1.6 ?
Thank You !
Sergio
I think it is a good thing for the Magician FAQ.
Question:
How to start my Voice Dialer Software from Bluetooth Handsfree button?
Answer:
1. Install your Voice Dialer Software. For example Cyberion Voice Dialer.
2. Install Project VCABT.
3. Enjoy!
hi to everyone, i recently got a new x2 (upgraded from my x1) i'm not a newbie around this forum but i've searched the whole forum and can't find an answer to my little problem.
i've installed cyberon voice dialer and btjetfix (so that i can use voicedialing on my x2) but but my problem is that i press the button on my bt headset and it activates voicedialing but the sound is not routed to my bt hesdset microphone, but to my phone microphone, if i call the name that i want it uses the phone's microfone and the sound is heard on my phone's speaker but the call is routed to my bt headset. that makes it impossible for me to call using my bt headset when my phone is in my pocket. all the above worked very sucsesfully on my x1 but now it's driving me crazy, is there any registry key that i can activate or deactivate to make it work properly?
other than that the phone is quite good i've had no other problems with it so far. thanks to everyone in advance.