Related
HAya guys and galls...
I'm wondering if it is possible to change the Bluetooth name of the Wizard in something else than the Owner name of the Wizard.
I want the info on Owner Information to be different than the bluetooth name.
Don't want to be in a place and someone starts shouting my name because I have bluetooth on, now what I mean?
Is there a registry entry witch you can edit to change the bluetooth name?
I tried a search on XDA, but couldn't find it...
Thanks for the advice....
p50kombi said:
Is there a registry entry witch you can edit to change the bluetooth name?
Click to expand...
Click to collapse
actually there is, i don't remember where, but it does not matter at all, because when you change it to your own value, after some time it will revert back to 'owner name' again. i don't know why i when it actually does occur, but i gave up with it...
Okay....
Tnxs for the info...
Anyone got it working though?
Or is it impossible....
Anyone???
afaik the BT name is the same as the ActiveSync device name.
You can change that to anything you like.
I'm afraid thats not the case..
My activesync name is not my bluetooth name..
As a matter of fact, I want the activesync name to be the same as the bluetooth name, that's why I want to change it....
My bluetooth name is the same as the owner info name....
But maybe you can tell me if you know of a registry key that makes the bluetooth name the same as the active sync name?
No one got a clue
There must be some way :roll:
Please....can someone help me
Hope so!!!!
not sure if this is what you mean but to change your bluetooth name go to start/settings/about/device ID and change your device name to whatever you want.
I was wondering how to change this also. My wizard is a T-Mobile USA MDA, and it shows up as "Pocket_PC" in the bluetooth scanners no matter what I name the Activesync connection or the device.
gadgetgirl said:
I was wondering how to change this also. My wizard is a T-Mobile USA MDA, and it shows up as "Pocket_PC" in the bluetooth scanners no matter what I name the Activesync connection or the device.
Click to expand...
Click to collapse
Try to pair the device again, may be you haven't set your device name in the first pairing. Bluetooth will not get the name again.
water
Yeah, I see it now. It shows up at my owner name, not my device or activesync names.
That's exactly what I mean...
It isn't the activesync name that is displayed..
Anyone got an idea to help us?
Nobody??
Does nobody have an answer for us?
No one knows witch registry key to edit?
i wanna say that the bluetooth name would be the owners name.
i changed my device name and thats what it comes up as in Activesync. im testing it now.
futuresbright said:
not sure if this is what you mean but to change your bluetooth name go to start/settings/about/device ID and change your device name to whatever you want.
Click to expand...
Click to collapse
Hi all,
Bluetooth(BT) name and ActiveSync (AS) name are two completly different things:
How to change AS name using WM5 (think it is the same in previous versions):
Settings -> System -> About -> Device ID -> Device Name
How to change BT name (WM5):
change the registry key - HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Settings\LocalName to the value you want
hope it was helpful
Does this keep the Bluetooth name until a hard reset occurs? Someone implied that it reverts on its own after a while.
madzippo said:
How to change BT name (WM5):
change the registry key - HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Settings\LocalName to the value you want
Click to expand...
Click to collapse
that's right, but somehow, after some time (i couldn't work out when exactly) it turns back to 'owner name' value.
eva_d said:
madzippo said:
How to change BT name (WM5):
change the registry key - HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Settings\LocalName to the value you want
Click to expand...
Click to collapse
that's right, but somehow, after some time (i couldn't work out when exactly) it turns back to 'owner name' value.
Click to expand...
Click to collapse
Hi,
I've had this for a long time and it never changed on its own.
As for hard reset, yes it does change to default setting if you hard reset it. but i think it's hard , if not impossible, not to do this.
Tnx
That's what I was looking for!!
Changed it, now lets see if it changes back sometime...
Thanks for the feedback....
What ever question i have, it seems someone has already answered it. I've had my wizard for 4 days now, and i love it, now its been fiddled round to working the way it should. Does anyone know of a small app that will allow me to alter my bluetooth name as and when i wish?
Or do i have to change the registry each time i want to change it?
Just recently I detected that I do not receive any calendar notifications any more, which is really annoying. Device wakes up but no sound at all. Browsed some threads on this (http://forum.xda-developers.com/showthread.php?p=1035667#post1035667) but only advise I found is to hard reset - which I do not want. I checked the registry instead and found some questioning entrys.
Could anybody USING PHONEALARM (www.pocketmax.net) on a Prophet or any other WM5 device please post some of his registry entries here?
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications
Many thanks
Hase01
I have no problem with these software. Did you have the last version already?
cidriver said:
I have no problem with these software. Did you have the last version already?
Click to expand...
Click to collapse
Could you post you registry values then? Would be very helpful for me
Thanks
To me either pocket clock or PHONEALARM caused the same problem.
I went back to a sprite back-up point from before installing both applications. Then my reminders and alarms worked again.
I have not tried to reinstall either of them.
Robin
cidriver said:
I have no problem with these software. Did you have the last version already?
Click to expand...
Click to collapse
Could you help me posting your registry values please? Once I found a solution without hard resetting I will post it here, seems that many have this problem. And I feel it is connected to PhoneAlarm
hase01 said:
Could you help me posting your registry values please? Once I found a solution without hard resetting I will post it here, seems that many have this problem. And I feel it is connected to PhoneAlarm
Click to expand...
Click to collapse
The registry values?
I didn't manipulate the registry, I just put the user name and introduce the serial number.
cidriver said:
The registry values?
I didn't manipulate the registry, I just put the user name and introduce the serial number.
Click to expand...
Click to collapse
Yes I did the same. And after more than two months I ran into the mentioned problem. And now I want to manipulate the registry but need to compare the mentioned values with mine. There is nothing critical about registry values and your would pretty much help me providing your info.
hase01 said:
Could anybody USING PHONEALARM (www.pocketmax.net) on a Prophet or any other WM5 device please post some of his registry entries here?
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications
Click to expand...
Click to collapse
hase01 - here you go...
BTW, I had the exact same thing happen to me with my Magician, and had to hard-reset to get notifications back. I've only just been game enough to load pA on my newish Prophet and so far it is working OK. I am running pA Lite v.1.56.1 (Build 80).
PeterW said:
hase01 - here you go...
BTW, I had the exact same thing happen to me with my Magician, and had to hard-reset to get notifications back. I've only just been game enough to load pA on my newish Prophet and so far it is working OK. I am running pA Lite v.1.56.1 (Build 80).
Click to expand...
Click to collapse
PeterW,
many thanks. Unfortunatly it looks the same on my phrophet - but without getting notified. I am using pA 1.31 - no idea whether this will generate other registry entries than pA lite 1.56.1. On my my WM2003 device with pA 1.31 installed the registry looks different, in reminders I have:
* Default = "Erinnerungen"
* Duration = 10
* Options = 1073741855
* Wave = "Alarm4"
Anybody else having these entries in a WM5 registry?
Regards Hase01
hase01 said:
PeterW,
many thanks. Unfortunatly it looks the same on my phrophet - but without getting notified. I am using pA 1.31 - no idea whether this will generate other registry entries than pA lite 1.56.1. On my my WM2003 device with pA 1.31 installed the registry looks different, in reminders I have:
* Default = "Erinnerungen"
* Duration = 10
* Options = 1073741855
* Wave = "Alarm4"
Anybody else having these entries in a WM5 registry?
Regards Hase01
Click to expand...
Click to collapse
Have found a solution using alarmToday, also a pocketmax product. Look my post on their support page:
http://www.pocketmax.net/smf/index.php?topic=2637.0
No need for a hard reset!!!!! Hope this helps other users, for me phoneAlarm is one of the best tools I have on my PPC and to deinstall it would be of great disadvantage.
hase01 said:
Have found a solution using alarmToday, also a pocketmax product. Look my post on their support page:
http://www.pocketmax.net/smf/index.php?topic=2637.0
No need for a hard reset!!!!! Hope this helps other users, for me phoneAlarm is one of the best tools I have on my PPC and to deinstall it would be of great disadvantage.
Click to expand...
Click to collapse
I used Freeware Task Manager from http://forum.xda-developers.com/showthread.php?t=280104 to fix this. Run it, go to notifications tab, select "delete duplicate" and reboot. All working nicely now.
Once my Bluetooth Headset is connected to my Prophet, all my notification sounds come through my Bluetooth Headset instead of the phone speaker.
The sound for normal incoming call works as it should though (through the speaker).
The only way i've found how to solve this problem, is to uncheck the "Wireless Stereo" option under:
Settings > Connections > Bluetooth > i.Tech Clip R35 > Partnership Settings
And then when I want to listen to music through the Windows Media Player, I have to do the opposit.
So, my two questions...
1. Is there a way to map notification sounds to always use the phone's speaker? (or)
2. Is there a small shortcut / Today-plugin that can switch "Wireless Stereo" on/off in one click?
Cheers!
Eric
Yes there is, i use a software called BTAudioToggle, you can place a shortcur to a launchbar in the today plugin, it works fine for me...
its postet in this post as an attachment:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Hope it helped
Greetz
Hybrid666 said:
Yes there is, i use a software called BTAudioToggle, you can place a shortcur to a launchbar in the today plugin, it works fine for me...
its postet in this post as an attachment:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Hope it helped
Greetz
Click to expand...
Click to collapse
Thanks Hybrid, unfortunatly this was a bit wrong...
It seems that this program routed the sounds to the Bluetooth Headset if I wouldn't have "Wireless Stereo".
Hence; it had its functionality when I turned off "Wireless Stereo".
The solution was in the right direction though, but not really right...
BIG note though: It messed up the sound on my normal "Wireless Stereo" mode. So the sound now has a distortion as well.
Ehm but i remember there a software which did the same like btaudio with stereo headsets, but this one costs money. You just have to google, cause i dont remember the name
Hybrid666 said:
Ehm but i remember there a software which did the same like btaudio with stereo headsets, but this one costs money. You just have to google, cause i dont remember the name
Click to expand...
Click to collapse
I found one called BlueMusic: http://www.teksoftbluemusic.com
Could that be the one you're refering to?
BlueMusic unfortunatly got about 99 functions that are more or less useless, packaged in a big memory overhead with nice graphics.
I just wanted the simple on/off switch...
ADD:
I'm running WM6, that's probably why most of BlueMusic's feature are superfluous.
My father got an Aus P535; when he uses the bluetooth headset, an icon is displayed on top, near "start": by clicking that icon, it is possible to redirect or not notification sounds to the headset... I didn't try that on the prophet, but I hope this can help you. bye
@overone: Hang in there...I'm trying to create a solution for one-click wireless stereo on/off..Will let you know as soon as I'm done...
Guys, been trying out a few things on mine AMEO qith BT8010's, it would appear that two reg entries are modified when turning on/off wireless audio.
I have attahced two reg export files bton.txt for audio on and btoff.txt for audio off.
if you look at lines 23 and 61 these are the values the executable will need to toggle. I dont have enough knowledge to code it up but if you know how to by all means give it a try.
carl_johnson82 said:
My father got an Aus P535; when he uses the bluetooth headset, an icon is displayed on top, near "start": by clicking that icon, it is possible to redirect or not notification sounds to the headset... I didn't try that on the prophet, but I hope this can help you. bye
Click to expand...
Click to collapse
Thanks for the tip.
Unfortunatly, my Wireless Stereo Icon next to the Start Menu didn't have any functionality.
shantzg001 said:
@overone: Hang in there...I'm trying to create a solution for one-click wireless stereo on/off..Will let you know as soon as I'm done...
Click to expand...
Click to collapse
Cool! Please post a copy of it here once you do!
I manage to fix the problem temporarely with a retarded Mortscript (my first ever).
But it's hardly the way I would like to have it solved.
ade0282 said:
Guys, been trying out a few things on mine AMEO qith BT8010's, it would appear that two reg entries are modified when turning on/off wireless audio.
I have attahced two reg export files bton.txt for audio on and btoff.txt for audio off.
if you look at lines 23 and 61 these are the values the executable will need to toggle. I dont have enough knowledge to code it up but if you know how to by all means give it a try.
Click to expand...
Click to collapse
Thanks!
I might try to modify my script to do this instead (incl a restart of the service).
That should be a whole lot prettier then my "click-by-code" script...
I'm almost done..Just need to find a function/macro (without using MFC/ATL/.net, my app is win32 native) to convert a unicode string to ascii string...Any suggestions??
Hey, no need for the unicode to ascii function...am done...expect the initial version for the utility tonight..(am at office right now, so will add the changes that I just made, to the code at home, and release after some testing on my phone)
shantzg001 said:
Hey, no need for the unicode to ascii function...am done...expect the initial version for the utility tonight..(am at office right now, so will add the changes that I just made, to the code at home, and release after some testing on my phone)
Click to expand...
Click to collapse
Cool, I'll be awaiting your release...
@overone: Am afraid..my experiment failed .. But it was just my first try...Am trying to hack away at the windows api to see if i can get smthing...keep ur fingers crossed..
Too bad.
Unfortunatly C is not my forte. Otherwise I would have liked to help.
actually the problem is not with c...problem is what i had perceived to be the solution but it turned out to be a false alarm...
shantzg001 said:
actually the problem is not with c...problem is what i had perceived to be the solution but it turned out to be a false alarm...
Click to expand...
Click to collapse
Oki.
I just ment that I don't know how to help you, since I don't write/read that lingo/api's...
I found an open .NET class in C# that could query the Bluetooth interface.
Unfortunatly, it only seem to have a "getService" and not a "setService".
I am very interested in this solution for the hermes. I linked this thread to the hermes forum.
Thanks for looking into this.
any news ??
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Same problem here
I have the same phone & problem.
And I can't charge through USB.
Anyhow, this version improves the typhoon far beyond previous versions. It's faster than wm5, wm5torage is incredible, there are no memory leaks (with wm5 I ended up with 2mb free and had to reboot frequently)
Cheers.
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
karhoe said:
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
Click to expand...
Click to collapse
Thanks for your help karhoe
I tried to do what you mention, but when I disable USB charging, there is no sign of charging (expected behaviour) and when I turn it back on, the problem continues.
Last night I reflashed to wm5 so I can:
- Check that the phone still can charge through USB (it charges ok)
- Get the font configuration in the registry so fonts look the same in wm6.
- Try to identify how voice tags work and see if I can take some dll/key association back to wm6.
I'll post results!
Mariano
Ok, I'm back to wm6 and I've found the following:
* USB charging works OK... I don't know what caused it. I'm reticent to install wm5storage, maybe it has something to do with it.
* I made the fonts look exactly the same as wm5. This is how:
In the registry, set the following:
\HKEY_LOCAL_MACHINE\GDI\SYSFNT\
CS=0
Ht=4294967281
It=0
Nm=Segoe Condensed
Qt=5
Wt=400
\HKEY_LOCAL_MACHINE\GWE\Button\StFontWeight\Wt=700
\HKEY_LOCAL_MACHINE\GWE\Menu\BarFnt\
WtMUI=700
Wt=700
\HKEY_LOCAL_MACHINE\GWE\OOMFnt\
Ht=4294967284
Nm=Tahoma
Wt=400
Anyway If you have Tahoma in your device's Windows directory some programs will look different.
Finally, regarding voice tags, I could only discover that there are no links like HomeLP.lnk or things like that to call an executable. It must be done some other way. :S
Mariano
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
WildDogRob said:
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Click to expand...
Click to collapse
is this what you wre looking for?
802 said:
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
Click to expand...
Click to collapse
Just to note this works now. just delete pairing after cab install, pair again, set as handsfree, itworks over bluetooth.
Thanks!
rickwyatt said:
is this what you wre looking for?
Click to expand...
Click to collapse
Now voiceTag is working fine. Great!
Found a way to enable built in voice tags over Bluetooth.
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
WildDogRob said:
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
Click to expand...
Click to collapse
Thank you SO much!!!
It works like a charm in my UK SPV C500!
You' re great!!!
Help with what file WM6 uses for voice tags
Can someone please tell me what .dll or file is used when you record a voice tag. I am using Andots WM6 ROM on my SMT5600 and voice tags do not work. I want to try to replace the non-working file with a WM5 file.
Or, maybe someone could tell me how to figure out what file/.dll is used. I’ve searched the registry for anything referring to voice tags but I found nothing.
Thanks
The first is A2DPSwitch. I wrote this a while ago and posted in the Kaiser forum. Posting it here because I made some changes and think some here might find it useful. It simply toggles the connection to an A2DP headset. Simply run the exe and if connected it will disconnect. If disconnected it will connect. The new changes are that now it checks to make sure BT is on first, and turns it on if it isn't. The other is a fix. Before if there was a non A2DP headset and an A2DP headset in range sometimes it wouldnt work. Now it always finds the A2DP headset. Useful for those pesky car head units that don't automatically connect A2DP. The cab will place a shortcut in the start menu.
The second is BTKeepAlive. An exe that runs in the background and checks to make sure BT is on and turns it on if it isn't. The checking interval in milliseconds can be modified by changing HKCU\Software\JKing\BTKeepAlive\Interval (DWORD). The default value is 60000 (one minute) and if that reg value does not exist 60000 will be used. BTKeepAlive 1.1 can now also keep discoverable mode on. Set HKCU\Software\JKing\BTKeepAlive\KeepVisible (DWORD) to 1 and BT will be kept on invisibility mode. The default is 0. I know there is a mortscript written to do this but I would prefer not to leave this up to a mortscript. Also, BTKeepAlive will automatically check immediately after the device is woken from sleep. Run BTKeepAlive.exe to start it and run BTKeepAlive.exe again to terminate it. The cab will place shortcuts in the start menu and in startup, and will create the reg value.
While you're at it, why not assign A2DPSwitch to the long press of a volume key?
[/Shameless plug]
Now back to working on X1BC. Cheers!
Thanks. It's a must for buggy HTC bluetooth driver across all their devices. My Kaiser and X1 always drop A2DP connection after phone call, and it would not happen on my Asus P525 on Eten M600
why is it after i have installed it, it doesnt seem to run? it just show a blank icon and doesnt do anyhting. its for both programs.
cksdud89 said:
why is it after i have installed it, it doesnt seem to run? it just show a blank icon and doesnt do anyhting. its for both programs.
Click to expand...
Click to collapse
The programs do not have interfaces. BTKeepAlive will just run in the background. click on it again and you will get a notification that it is exiting. A2DPSwitch toggles and A2DP connection. Do you have a wireless stereo headset?
jackleung said:
Thanks. It's a must for buggy HTC bluetooth driver across all their devices. My Kaiser and X1 always drop A2DP connection after phone call, and it would not happen on my Asus P525 on Eten M600
Click to expand...
Click to collapse
I thought it was just that the Windows Mobile bluetooth stack just sucked at A2DP. Did either of those devices use the broadcomm/widcomm bluetooth stack?
JKingDev said:
I thought it was just that the Windows Mobile bluetooth stack just sucked at A2DP. Did either of those devices use the broadcomm/widcomm bluetooth stack?
Click to expand...
Click to collapse
P525 use Widcomm but M600 use MS stack as well.
I have just purchased an X1 and have the problem with bluetooth turning off constantly. I have downloaded the .cab files and unzipped them, but the setup file is an .xml file and there are no instructions.
I am prety new to this stuff and dont fully understand.
Could someone please give me some setup instructions.
Thanks
IWW20LSS41 said:
I have just purchased an X1 and have the problem with bluetooth turning off constantly. I have downloaded the .cab files and unzipped them, but the setup file is an .xml file and there are no instructions.
I am prety new to this stuff and dont fully understand.
Could someone please give me some setup instructions.
Thanks
Click to expand...
Click to collapse
A cab file is an installer that you can run directly on your PPC. Just copy the cab file to your X1 using Active sync or by copying it to your storage card and open it on your X1 using the file explorer.
Thanks JKingDev, the Keep Alive is a real improvement for me!
BadTasteUK said:
Thanks JKingDev, the Keep Alive is a real improvement for me!
Click to expand...
Click to collapse
Glad that I could help.
Thanks JKingDev for such a useful tool like btkeepalive!
i love it!
Now I have a question:
are you able to expand this useful tool for the function that it keeps alive the visibility of bluetooth too?
because after using wifi, my bluetooth toggles automatically invisible, but i need visibility always to use bt with my car stereo handsfree...
i hope you could help me
primus.interpares said:
Thanks JKingDev for such a useful tool like btkeepalive!
i love it!
Now I have a question:
are you able to expand this useful tool for the function that it keeps alive the visibility of bluetooth too?
because after using wifi, my bluetooth toggles automatically invisible, but i need visibility always to use bt with my car stereo handsfree...
i hope you could help me
Click to expand...
Click to collapse
That is strange that you must keep bluetooth on visible for your head unit to connect. Sure, I will add a registry value "KeepVisible". If the value is 1 btkeepalive will keep visibility on.
Ok, version 1.1 uploaded. Set HKCU\Software\JKing\BTKeepAlive\KeepVisible (DWORD) to 1 and BT will be kept on invisibility mode. The default is 0.
Hey JKingDev,
great work!
I've already tested it. I changed the DWORD to 1 and now it keeps BT visible
Thanks a lot!
Great set as usual JKing
i really like your apps, installing almost all of them on my phone
Thanks mate
Hi,
Thank you for your great work, but may i know how am i able to remove your program as your program doesn't show in the program list when im trying to remove it. Thank you.
primus.interpares said:
Hey JKingDev,
great work!
I've already tested it. I changed the DWORD to 1 and now it keeps BT visible
Thanks a lot!
Click to expand...
Click to collapse
No problem, glad it is working for you!
anaadoul said:
Great set as usual JKing
i really like your apps, installing almost all of them on my phone
Thanks mate
Click to expand...
Click to collapse
Thank you for the support!
FenomX said:
Hi,
Thank you for your great work, but may i know how am i able to remove your program as your program doesn't show in the program list when im trying to remove it. Thank you.
Click to expand...
Click to collapse
Hmm, I am really not sure why that is. It should be in add remove programs as "Jonathan King's BTKeepAlive". How did you install it? Did you manually run the cab or did you use something like UC to install? To manually remove, stop the program, delete the shortcuts from \Windows\Startup and from \Windows\Start Menu\Programs, delete the program from \Program Files\BTKeepAlive, and delete the reg key HKCU\SOFTWARE\JKing\BTKeepAlive.
confirmed with my x1 too btkeepalive keeps on bluetooth all the time!!!! great work!
JKingDev, may i make a request ?? hmmm ! could you create a deamon that when the handsfree from your car connects the deamon would activate a2dp ??
this would be a killer deamon !!! like you said that car a2dp is a pain ...
This script works perfectly, thank you so much! My HTC Diamond disconnects bluetooth randomly when paired to my BMW bluetooth so hopefully it'll work as well in my car as it does when I toggle off bluetooth manually. One quick question, if I set the dword to 1000 (1 sec) will that have any impact on my battery? I'm hoping not as this is such a tiny program but I really have no idea.