Related
Hi
I have and XDA11 which has been work fine until today.
I was finding my XDA just freezing so Isoft and hard reset and when it came back on the screen would not work.
Has any one else had this problem and was it easy to fix.
Any advise welcome.
Thanks in advance
Solution
Just to let every one know I solved the problem with my touch screen.
Solution: let both the main and back-up battery run down the reconnect to cradle and charge as is new.
Hope this help all the people with the same problem
what exactly was your problem with your screen? Cos I am having a problem with the touch screen - no matter where i touch it it thinks I am touching it on the far right of the screen, (I can only scroll)...
is this the same problem?
Dead Touch Screen
My problem was when I touched my screen (which looked fine-) I got no response at all the whole screen seemed dead.
Solution was to let the XDA11i back-up battery run down-then completely. I then reconnect to cradle and recharge.
This worked for me.
I have the 8125 and tonight i go to answer a phone call. When i got off the phone mysteriously the touch part of the screen no longer works. I tried a soft reset, a hard reset, removing the battery.... I cannot get the touch part of the screen to work. You can see whats on screen but there is no touch functionality. Anyone have any ideas?
remote screen aligment
i had the same problem the touchscreen stopped working suddently. im assuming that you can get pass the touch the screen to set up you device so what i did i downloaded a program called "remote screen aligment" that the only way you are going to be able to pass the first screen. hope this helps. google it to find the program its free.
S1ug said:
I have the 8125 and tonight i go to answer a phone call. When i got off the phone mysteriously the touch part of the screen no longer works. I tried a soft reset, a hard reset, removing the battery.... I cannot get the touch part of the screen to work. You can see whats on screen but there is no touch functionality. Anyone have any ideas?
Click to expand...
Click to collapse
Same problem here, just started browsing around since I was travelling last week without computer access. I am goign to call warranty services with CIngular tomorrow if they are open. If not first thing Tuesday!
working?
did you get it working again?. It happed to me yesterday, drives me nuts
Nah, called CIngular and got a warranty replacement no problem.
Re: remote screen aligment
kurtslash said:
i had the same problem the touchscreen stopped working suddently. im assuming that you can get pass the touch the screen to set up you device so what i did i downloaded a program called "remote screen aligment" that the only way you are going to be able to pass the first screen. hope this helps. google it to find the program its free.
Click to expand...
Click to collapse
Mine did this when I was CID-unlocking and had mismatching IPL/SPL versions. I found that by drawing a circle around the alignment cursor with the stylus I was able to get past this screen.
Not working touch screen / broken replacement ...
Center of my XDA miniS touchscreen stopped to work almost 3 weeks ago...
I sent my (lovely) PDA to O2 UK two weeks ago and today I received FAULTY replacement!
(very good known and common issue - "stylus is very loose and keeps falling out")
I've just sent another e-mail to O2's Customer Services and I'm waiting for reply...
I'm so angry and disappointed!
Regards
anyone find a solution
My touch screen gave out yesterday...I am getting very good at using my 8125 without the touch screen but a few programs require it. If anyone has found a solution please let be know because it would be a very happy man. Thanks for reading!
Hi all.
Just got a JasJam about 2 weeks ago.
I am have a problem with the touch screen.
After about 5 mins of use the touch screen slowly gets more and more unresponsive untill it stops working.
If i remove the battery and let the phone sit for a couple of minutes then restart it the touch screen would start working again. But for only 5 mins.
Is this what everyone is refering to as problems with Screen Allignment or do i have a bigger problem.
Does anyone have any suggestions on how to fix this problem.
Thanks
Travis
Personally i would do i hard reset and not install any additional software to see if you have the same problem. If yes, then its hardware problem and needs to be sent in for repair. If not, then install your programs back one by one to find the culprit.
S.K.
EDIT: Ensure you back up your data before performing a hard reset. You will lose all information stored on the phone.
Silent_Killa's advice is what I would do. Might try uninstalling apps one by one first??
This is NOT the screen alignment issue - I don't think. It depends if the screen responsiveness going off is actually at the point at which you tap the screen is not matching where the screen responds?? In other words it does respond but not at the location you tap. If this is happening then it is the SA issue, but if the screen does not respond in any way to taps then I doubt it's the SA problem - though could well be a digitizer issue.
I have not searched, but a week or two weeks ago an identical problem was posted by someone else.
If a hard reset does not cure this I would suggest a return as soon as possible.
Mike
Hey guys.
Yea i trided the whole hard rest thing and it still did the same problem.
The screen works fine but it is just the tapping part that gets screwed up.
All my hardware buttons work ok so i can still use the phone. I just can't use the touch screen.
Do you really thing an application could do this sort of thing.
The main ones i use are -
SPB Diary
SPB Pocket Plus
Spb Weather
Pocket Informant
Are these know to cause any problems.
I will try one more time and not install any apps.
Oh well 2 weeks old and it's off for repair.
Thanks for your help.
Saber_007 said:
Hey guys.
Yea i trided the whole hard rest thing and it still did the same problem.
The screen works fine but it is just the tapping part that gets screwed up.
All my hardware buttons work ok so i can still use the phone. I just can't use the touch screen.
Do you really thing an application could do this sort of thing.
The main ones i use are -
SPB Diary
SPB Pocket Plus
Spb Weather
Pocket Informant
Are these know to cause any problems.
I will try one more time and not install any apps.
Oh well 2 weeks old and it's off for repair.
Thanks for your help.
Click to expand...
Click to collapse
BUT surely you tried it for an hour or two before installing anything!!?? And if working then only one application at a time?
No I don't think any of those apps. are the cause of the problem.
You still have not given full details about whether the screen is completely unresponsive or misaligned.
Either way if it's under warranty and hard reset does not cure it, get it returned cos this is not some little software fault.
Mike
Touch screen do not respond
mikechannon said:
I have not searched but a week or two weeks ago an identical problem was posted by someone else. If a hard reset does not cure this I would suggest a return as soon as possible.
Click to expand...
Click to collapse
Yes, it was me (I think), I had this problem too. It was only when the keyboard was slided and locked opened. Button would respond but screen would freeze and the start menu, sometimes, would pop up as an extra.
I had to give it back ...
dam said:
Yes, it was me (I think), I had this problem too. It was only when the keyboard was slided and locked opened. Button would respond but screen would freeze and the start menu, sometimes, would pop up as an extra.
I had to give it back ...
Click to expand...
Click to collapse
Hope you get it back working this time so you can start to enjoy it!!
Mike
dam said:
Yes, it was me (I think), I had this problem too. It was only when the keyboard was slided and locked opened. Button would respond but screen would freeze and the start menu, sometimes, would pop up as an extra.
I had to give it back ...
Click to expand...
Click to collapse
YEP that is exactly what mine does sometimes. After i open the keyboard the start button would start to pop open and close.
How did you get on. Did they tell you what the problem was.
Cheers.
mikechannon said:
BUT surely you tried it for an hour or two before installing anything!!?? And if working then only one application at a time?
No I don't think any of those apps. are the cause of the problem.
You still have not given full details about whether the screen is completely unresponsive or misaligned.
Either way if it's under warranty and hard reset does not cure it, get it returned cos this is not some little software fault.
Mike
Click to expand...
Click to collapse
Sorry, about that.
Full Details-
Screen has no problems with SA. After about 5 mins the screen slowly becomes more unresponsibe. IE i would have to tap the start button several times for it to work. When it finially pops open it just closes again almost straight away.
Not long after this the screen will become totally unresponsive, howver all hardware buttons will still work.
I am going to try a hard reset tonight.
I will let you konw.
Thanks again.
Well it is deffinitly my phone.
The screen wasn't working as per normal.
I hard reset my phone. When it rebooted and got to the "tap the screen to continue" bit. Guess what it didn't work.
I taped the screen several time but no go. The screen was dead.
I will have to send it back to the shop.
Cheers.
Travis
wiki update
I took the freedom to update the wiki on this issue :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
well, my device was a second hand but the seller was as so kind as to take it back... nothing for chirstmas this year .
still... happy new year to everybody !
Saber_007 said:
Well it is deffinitly my phone.
The screen wasn't working as per normal.
I hard reset my phone. When it rebooted and got to the "tap the screen to continue" bit. Guess what it didn't work.
I taped the screen several time but no go. The screen was dead.
I will have to send it back to the shop.
Cheers.
Travis
Click to expand...
Click to collapse
Fingers crossed you'll get a good one back. I think you were going to have to send this one back anyway.
Mike
JasJam screen responds to "ghost" taps!
The touch screen on my JasJam responds to continuous taps even when I don't tap it. When the keyboard is slid out, the start menu keeps on popping as if the start button on screen is being tapped. When keyboard is slid inside (device is closed), the device behaves as if the OK button (the "X" on top right) is being tapped continuously. Due to this, I can't open any program. (As soon as a program is opened, the "X" button on top right is automatically clicked and I reach Home screen again!
I uploaded a video about this mal-functioning of device:
http://www.youtube.com/watch?v=YWAyRLQ01oo
I have already:
1. Alligned screen
2. Hard reset device (Left and Right softkeys + Reset button)
3. Updated ROM and hard reset device
but of no use! Please help.
Read that
it's a hw issue, had to get a replacement ...
Same problem
I seem to be having the exact same problem. When I first got it, I was able to use the phone for a couple of weeks, then all of the sudden, the screen stoped responding, but all the buttons worked. I did a hard reset, and it worked for a little while, then when bad again. At first I thought it was related to ActiveSync because it would always go bad immediately after syncing. However, even when I don't sync after a hard reset it eventually goes bad again. Today I just got it back from manufacturer - they couldn't reproduce the problem. It worked all day. Then I synced. Stupid me. Its not responding again.
There's no way out. Get a replacement.
I'm hoping that my replaced device doesn't have same issue.
same problem
I have the same exact problem. I sent back the Phone to Cingular / HTC, and they "repaired" it under warranty. I got the phone bac, and after a day's use, it went back to its old state.
Since I got this on ebay (BIG mistake), even though it was new, its having this problem.
So far i am not at ALL impressed with the 8525. Seems to me like its laden with hardware issues.
Can someone please offer insight as to what I can do?
Sorry to hear that! I had actually purchased i-mate JasJAM from Dubai. i-mate has just one service center in USA (PocketPCTechs in CA). They provided amazingly great customer service and replaced the main board. So far the problem hasn't repeated.
shassouneh said:
I have the same exact problem. I sent back the Phone to Cingular / HTC, and they "repaired" it under warranty. I got the phone bac, and after a day's use, it went back to its old state.
Since I got this on ebay (BIG mistake), even though it was new, its having this problem.
So far i am not at ALL impressed with the 8525. Seems to me like its laden with hardware issues.
Can someone please offer insight as to what I can do?
Click to expand...
Click to collapse
Hey, I am having the same problem as well. Bought my phone on December 06 from eBay seller too. Big mistake as HTC will tell you sorry your warranty is void if you did not purchase the device from the carrier (even though it was new.) I am curious how you were able to get it repaired under warranty since you too bought yours from a third party.
I did the credit card trick and it worked flawlessly for about two months and just yesterday I am back to the same problem. After today doing the credit card trick numerous times I finally got the touch screen working now but who knows for how long this time.
BTW my serial number is in the HT642Fxxxxxx if anyone else that has this problem wants to compare and post theirs.
Facing the same problems...
... I've been thinking about repalcing the display and the touchscreen. But now, considering that it is a HW issue, I can only replace these two things. If the bug is in the module above the screen (statur leds and camera) or related to the wireing at the back of the screen, it won't get rid of the problem. On the other hand, if it is a problem with the screen getting too hot, then I'm on the right track...
Has anyone tried this yet?
I'll try to call HTC on monday, maybe they know where the bug is.
I have a Sprint Touch [Vogue]. It has served me very well up until recently.
One day, I was using my phone normally when the battery died. No big deal right?
Well, I charge my phone and reboot it. For some reason, Windows is EXTREMELY slow and unresponsive. I figure that something vital had been corrupted by the battery's death, and that it was nothing that a hard reset couldn't fix.
I performed a hard reset.
I let the utilities for the first boot run to customize the phone. Everything seemed pretty much normal. I configured my settings, re-added my contacts, etc. Then I turned the screen off [with the power button].
I turn it back on later to do something. I touch the screen. It immediately and accurately detects the touch's location, but it continues detecting a touch. For 20-30 seconds, after the input has stopped.
It was strange, so I soft reset the device. It booted, with the same problem. So I performed another hard reset. I did some configuration [the response acting normal at this point], and then turned the screen off. Turning it back on brought the same problem back.
This problem still exists on my phone, even after numerous hard resets and even ROM flashes.
A better description of the problem: When the device is first turned back on [meaning brought out of standby], its touch response is messed up. It will immediately and accurately detect any touch input, but it will continue to detect the input for up to 30 seconds AFTER it has been released, as if you were holding it the whole time.
WHY is this???? My phone is almost unusable because of this!!!! I can still place/ receive calls, using the navigation buttons and the red and green buttons. But the touch response is screwed!
Can someone please shed some light on this problem I'm having?
Phone specs: Windows Mobile 6.1, HTC / Sprint customized. Minimal third party software is currently installed.
[I've already determined that third party software is not the problem, because i haven't installed any!]
Possible solution
Hi,
today I experienced something similar to your description - no touch response when I tried to pickup a call. The strange thing is that last night everything was working and no settings were modified nor programs were added/removed. The screen suddenly 'died'. At the moment I am using it through a program MyMobiler which brings the mobile display to the PC and I can use the mouse to control the phone (it is like VNC for the phone screen, the phone is connected with ActiveSync).
This is temporary solution untill I finish my backups of files, programs, settings. I didnot performed hard reset yet, hope this will solve my problem
In the following link there is a 'magical' solution - to remove the screen protector:
http://www.htcwiki.com/thread/1112981/LCD+or+Touch+screen+not+working
P.S. I had removed the screen protector and voilá - the screen is now touch responsive. The root cause of the problem obviously is the dust between the screen and the protector which results in constant screen pressing - and as a result no accepting my finger presses.
I hope this will work for you and others with similar problem.
I had a similar experience with an old Vogue.....In my case, there was no battery death precursor, but it just started acting up. Not too long thereafter, I noticed the screen/digitizer was forming what looked like an air bubble between the digitizer and the LCD on one place of the screen. The screen was becoming defective. I eventually had to buy another Vogue from a friend who didn't have a clue of the 6900's potential, and didn't want his anymore, so I got it cheap.
Sounds like your screen/digitizer may be on it's last leg.
this is a new problem for me. I have been using the most recent Dutty ROM together with Mdeejay Android ROM without any problems. All of a sudden, when I try to unlock the screen after STANDBY, it just wont register my touch, as if I am not touching it. It boots up fine, and on the first unlock works fine, but when the screen lock goes on again (after every standby) it just wont unlock. So I am stuck (I use Exchange and our policy forces the lock after standby, so I have to use it - and its worked fine for ages).
If I boot into Android, it works fine, the unlock works fine, yet strangely when I try to shut the power down, THAT screen also doesnt register me touching it.
I have hard reset but even before I load an app or do anything, the problem exists.
I also reflashed a DUTTY ROM. Same problem.
I tried CHT lockscreen - same issue. After Standby, screen doesnt register my touch.
Anyone have any ideas?
Same problem for me.. Restoring a backup image after being forced to hard reset this morning and now suddenly my HD2 won't wake up after sleeping. Pressing my end key only lights up my buttons but I have to pull the battery to reset. I'm thinking it's related to me having CHT installed, yours however might be a different problem.
I had something similar. It was right after I had installed CHT 2.0 and was looking to make the top and bottom bars transparent. I found a cab that claimed it would do this and installed it. Sorry, I don't recall what cab it was and I have deleted it. When I rebooted Sense would hang and if it got into a lock it would only move the slider a little where it would stop. Luckily, I had done a backup that morning right after I installed CHT 2.0 with Sprite so I restored and all was well.
I don't know if this is of help but I figured I'd throw it out there.
it wakes up, but wont register when I try to swype the unlock screen.
ekerbuddyeker said:
it wakes up, but wont register when I try to swype the unlock screen.
Click to expand...
Click to collapse
Your lucky you get that far lol.. I don't get any waking up. Plus I now uninstalled S2U2 and still no change. Disabled all locks of any kind and still frozen with sleep of death with in 1 min of hitting power to sleep it. I REALLY don't want to to a hard reset and install everything from scatch.. UGH.
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
bump this is horrid
same
im having the exact same issue. I have flashed 3 different roms and flashed to the newest radio (2.15).
I started out using energy rom, didnt help. Flashed a newer energy rom, didnt help. Now im using the dusk rom, same issue.
SOMEONE PLEASE HELP!!!!
It's a quite common digitizer problem lately... it seems the HD2's digitizer is failing on some units, possibly because of usage with android? my father's device acted the same way, only it sometimes did register touch and other times, not.
My device doesn't have these problems, yet. But seeing that a lot of people here are experiencing these issues, and with the notion that I use android pretty much all the time since I first booted my device, i'm pretty sure i'll experience it soon as well..
Make no confusion thou, the assumption that android effects the digitizer are purely my own thoughts on this matter, no such thing has been proven and the conclusion that android is effecting our HD2s is based purely on the statistics of touch screen failures in the last few months since android has been made publicly available in a working form.
EDIT:
Those seeking A solution, as far as I know, the only solution is sending your unit to HTC for repairs, you'll get it back with a note that says that they replaced your digitizer or your screen, at least these are the reports I heard from the other folks whom followed this procedure.
Good luck.
HTC HD2 Screen Lock
I have only used Android a few times on this 'phone and it has a standard HTC/O2 ROM installed so it must just be a problem with the top part of the digitiser. With android running the unlock is at the bottom and is unaffected.
Is there any way of testing the digitiser before deciding whether to get a repair sorted,
Ta,
link:
htcphones.net/htc-hd2-problems-with-touchscreen
short version :
change digitizer
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
A friend was complaining to me about something like this since last week. I could not figure it out so I went ahead and installed Android cm7 and still have the same issue.
Until I read this post after searching through the forums all over Screen now unlocks perfectly fine but only using the green Phone icon. If I try to wake the screen with the red Power button, the screen is unresponsive.
Thanks for the info.
Already happened tome its a hardware issue can't be fixed so if you still have warranty on ur phone send it to htc for repairs b because it tends to get worse n worse soon other keys will start to give in I think that's one reason why most android phone been switching to capacitive buttons because hardware causes this sorta issues and send it in for repairs to get it fixed
Sent from my SGH-T959 using XDA App
the same issue with me , is there is any solution for that .
Wakeup the phone using the send button.it will work