Somebody has trouble with WM 2005, ActiveSync 4.0 (in PC) is working not stable or hanging all the time and me too- Magneto with WinXP SP2, office 2003 SP1.
In my experience some solution can be improved as following:
1. ActiveSync via IR - very sample but too slow
2. ActiveSync via Bluetooth - sample and fast
3. ActiveSync via USB, we need to do some steps
+ Turn off firewall of OS windows
+ Open network cards on your Himalaya:: Settings/ Connections/ Network cards
+ Click "Remote NDIS host" and you can see: Marked " Use specific IP addres"
+ Click " Use server-assigned IP address"
+ Click OK
+ Connect your device to PC, ActiveSync must be working at least in my case
,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb
,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb
??
@ xpirate
You can try remove activesync 4.0 and reinstall again, reset PC, turn off firewall and reconnect.
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
deadparrot said:
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
Click to expand...
Click to collapse
I noticed the same problem with AS 4 - it would only synchronise Favourites and Files.
Read the error messages carefully and you will find one telling you to use the 'Detect & repair' option on Outlook. I did so and it synced properly.
It was when I went back to Outlook Express that I realised that my OE wasnt the default email client anymore - Outlook had taken over that function. I made OE the default client again and AS stopped synchronising - went back to the same old error.
From the above I can only conclude that AS4 will only synchronise with Outlook and not any other PIM programmes. It also requires Outlook to be your default email client if you want to sync - slimy lil microsoft trick.
If you have a firewall, you will also notice that ActiveSync tries to send out email messages - this is both annoying and scary. Who are these messages intended for - Microsoft? I have blocked AS4 from sending emails on my firewall, but I still have to do a 'detect and repair' which sets Outlook as the default email client everytime I want to sync...
Problemas with the activesync
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
thanks for the help.
Txemuki
Re: Problemas with the activesync
belaten said:
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
Click to expand...
Click to collapse
I got the same problem with my Win2003Server box.
If you are running XP then you need to apply Service Pack 2
If you are running 2003 then you need to apply Service Pack 1
Seems that these packs have files "netrndis.inf" and "Usb_Rndis.ndi" that fix our problem
If you will find these files could you pls send them here? I dont' have SP1 installed and cant find these anywhere ((
I can confirm this.
On my office notebook I don't have SP2 on XP and Activesync does not work via USB (Bluetooth works).
On my home PC I have SP2 on XP and Activesync works via USB.
I guess I have to try to get these files somehow.
Patric
Update: OK, I got netrndis, but I don't have usb_rndis...
Hi Patric,
Thanx for the file!!!
Can you also post: rndismpx.sys AND usb8023x.sys ?
So, hope we will find a solution for non-SPed WinXPs and maybe for non-SPed Win2003
Thx!
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Cheers Patric
Hi Patric,
pschoch said:
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Click to expand...
Click to collapse
Thank you very much for the files! No need for the "usb_rndis.ndi"
It seems to be working on XP but not on my w2k3 box :-(((
Here what to do with files on XP:
1) Open "Drivers" subfolder in your ActiveSync folder (i.e., c:\program files\microsoft activesync\drivers)
2) Copy all three files there: netrndis.inf, rndismpx.sys & usb8023x.sys
3) Put your I-Mate to the cradle
4) When device installation wizard will ask you to proceed with Automatic or Manual installation you need to Choose "Manual". Then open your activesync's Drivers folder. Choose "Windows Mobile-based device" and wait until installation is finishes...
Good Luck!
hi there..
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
thanks for help
johnz said:
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
Click to expand...
Click to collapse
Have no exact idea cause didn't have such, but try to:
1) Disable ALL possible firewalls
2) Make sure your current ActiveSync Partnership is not "Microsoft Exchange" and if it is, just delete current partnership and create a new one
3) Remove "Email" from your sync list?!
4) Remove "Favorites" from your sync list?!
thx..
but..I have no firewall turned on (i had only microsoft firewall, it's off)
I have never connected to an exchange server, my partnership in activesync is only with my pc.
I have reinstalled activesync, not useful
removing items could help.. i'll give it a try
i'm going to sleep for now, thanks..
I *think* longhorn is very nice, but i'll stay with xp
I copied everything and did the procedure... now I get the error message 'Device can not start (10)'...
Not successful yet...
Patric
can instal 2005 on my xda2
hey i downloaded the win2005 and active sync 4 but when iam flashing ma rom and instaling the file an error says that cannot connect or smthn or an error in connection why is that ?
any progress
Same error Pschosch
No Progress what so ever!!
ActiveSycn 4.0 Works after all!!!
I fixed my ActiveSync USB problem...
I downloaded ActiveSync 4.0 from Microsoft's web site and instlaled over current AS4.0.
When I placed my MDA2 on the cradle, the same problem persisted, so with the PDA still in the cradle I unplugged the USB connector and then connected it again but to another port. Now the system detected a "new" device and installed properly this time so now it works 100%.
I hope this procedure helps you too!
By the way, I'm on Win XP (no SP2) and USB 1.1
Best regards,
Rayan
Does the activesync 4 can sync WM2003SE? cuz i got problem saying that version incompatible..
Is it possible to sync files between my computer without hooking it up to the data cable?
Since I'm now online with an Exchange server I really have no other need to plug in the data cable so I was wondering how one can sync files?
If I could see the phone on my home network from XP I could run create a sync profile in my backup program but I've been told the phone can see network shares but vice-versa. Strange.
Thanks
David
If you sync the device once with ActiveSync, you can then use Bluetooth to sync... from your device.
Other then that, search G00gle for a PocketPC sync application
QuaCKeReD said:
If you sync the device once with ActiveSync, you can then use Bluetooth to sync... from your device.
Other then that, search G00gle for a PocketPC sync application
Click to expand...
Click to collapse
Thanks for the reply.
David
Hi guys,
I'd like to sync my Jamin with the Outlook of my laptop and the Outlook of my pc in office both.
At the moment, I sync my Jamin only with my laptop and in office I configured activesync to has no syncronization item. (I use activesync just to install app and use pocket controller.)
Wich is the best way to sync both the pcs in my actual situation?
P.S: I use Outllok 2003 in both pc.
Mine syncs to 2 PCs just fine. I only sync email one one but everything else on both.
Are you using ActiveSync 4.1 on both PCs?
Markino said:
Hi guys,
At the moment, I sync my Jamin only with my laptop and in office I configured activesync to has no syncronization item. (I use activesync just to install app and use pocket controller.)
Click to expand...
Click to collapse
So you don't have a problem. Just enable whatever you want to sync. It should work perfectly.
Thnks guys!
I'll try...
P.S: I use the newest Activesync 4.2! :wink:
Does anyone have any programs (or a way to setup WM6) to do a sync when wireless is connected.
I am in an environment where i am connected via wireless for half my day.
I would like to be able to sync with my exchange server over wireless when it is connected and not sync when its not connected.
I am wanting it to sync automatically every time it connects (or every X minutes while it is connected) via WLAN
I am running a Dopod 838 pro with WM6pro and syncing with exchange 2003.
Any help appreciated.
This might not be the exact answer for you... But check rk-OSR(Check my signature) for the utility to check emails using wifi.
Great App
Wow, thats a great app...
I will be using this unless anyone come up with a better solution.
Thanks for the prog tytnguy.
One suggestion for future versions,
Add a sync every X mins/hours option.
Also is there any way of having it sync without showing the window (like sync in the background)? Not that it is a problem, just would be a little tidier.
Once again, great work and thanks.
You could also use a tool like emoze (www.emoze.com). I can use it to sync my mail, contacts, appointments, etc....
Thanks for the suggestion emay but I already have Exchange server 2003 running, so all my emails and contacts are syncing correctly.
Its just getting it to do it automaticly over WLAN while its connected to save me data charges.
Helpful answer
quaterevil said:
Does anyone have any programs (or a way to setup WM6) to do a sync when wireless is connected.
I am in an environment where i am connected via wireless for half my day.
I would like to be able to sync with my exchange server over wireless when it is connected and not sync when its not connected.
I am wanting it to sync automatically every time it connects (or every X minutes while it is connected) via WLAN
I am running a Dopod 838 pro with WM6pro and syncing with exchange 2003.
Any help appreciated.
Click to expand...
Click to collapse
You may need to check your root certificates on your device and check with your admin about who you get your certificates though for the exchange server. They will have one if they have the exchange web mail log in enabled.
If you can get the certificate file to your device (tip: if it's a .crt file rename it a .cer so WM6 will read it). Then you can run it right off your device's file manager and it should install.
After that just make sure you're telling your device to sync via wifi.
Oh, and you can also configure peak times, this might save battery so your phone isn't constantly checking home wifi to sync. Also configure what to sync though the settings in your active sync menu, you should also be able to tell it only to connect wirelessly via wifi and not though your data plan.
I hope this all helps.
Hi all,
I would like to ask if you know a program to sync my Outlook calendar on my work PC with my Trinity? I cannot install ActiveSync 4.5, because I am not an admin on my laptop and the company has only MS ActiveSync 3.7 packaged and I cannot make it to connect to my Trinity. So the question is: is there any program which does not need to be installed (I can simply copy it to my laptop) or is there a way to connect AS 3.7 to my Trinity?
Any help would be much appreciated.