how to exit bootloader - PDA2, XDA IIi, 2020i Software Upgrading

How do you exit the bootloader if I don't want to change something?

try pressing power button+soft reset simuntaneouly to exit bootloader mode

Didn't work, I think it probably already corrupted the rom... 'cause it stays in the bootloader...
Gtz

xanh said:
Didn't work, I think it probably already corrupted the rom... 'cause it stays in the bootloader...
Gtz
Click to expand...
Click to collapse
then, whilst it stay in the cradle, try doing a rom update(or rom degrade) to let your device out of bootloader mode

xanh said:
How do you exit the bootloader if I don't want to change something?
Click to expand...
Click to collapse
Solution for getting out of Bootloader:
http://forum.xda-developers.com/showthread.php?p=1739989

I updated my tytn with the original htc rom and now it remains in bootloader mode and i can't exit!!
what can i do??
thanks

Related

I Think I Bricked My 8125

I was installing a new rom and my laptop shut down at 98% done. Now my 8125 will only come on in boot loader. PLEASE HELP!!! ASAP
Try to reflash your current ROM, start the flashing thru the Bootloader Screen..you're still lucky you still got the bootloader UP.Hehehe
Goodluck
I'm trying that. it started to work once but then my fing laptop shut down again at 98% again. I think there is something with that rom. Now I'm trying to flash with original rom but it is telling me that it is not connected now.
Ok, try to re-download the ROM installer again..if still fails, try to load the ROM thru MiniSD, that would be the last option you got if all still fails.
ya u can try to download also a dif rom installer or try it on a dif computer
da_mayhem said:
Try to reflash your current ROM, start the flashing thru the Bootloader Screen..you're still lucky you still got the bootloader UP.Hehehe
Goodluck
Click to expand...
Click to collapse
How do you flash thru the bootloader screen ????
once u get the phone in bootloader mode by pressing the camera button and press on..plug the phone into your computer..active sync might not conect but it doesnt need to..then just flash ur phone
keith1569 said:
once u get the phone in bootloader mode by pressing the camera button and press on..plug the phone into your computer..active sync might not conect but it doesnt need to..then just flash ur phone
Click to expand...
Click to collapse
Flash it how .... Details please ... Thanks in advance ....
PURESKILLZZZ said:
Flash it how .... Details please ... Thanks in advance ....
Click to expand...
Click to collapse
Download the RUU ( ROM Update Utility ), just execute the EXE and follow instructions.
da_mayhem said:
Download the RUU ( ROM Update Utility ), just execute the EXE and follow instructions.
Click to expand...
Click to collapse
I cant flash it as phone doesnt turon on pass 1st boot screen...
PURESKILLZZZ said:
I cant flash it as phone doesnt turon on pass 1st boot screen...
Click to expand...
Click to collapse
I don't think you're in the bootloader mode when you try. The screen should be three colored and when connected to USB it should say USB at the bottom of the screen.
As mentioned before. You get to bootloader mode by pressing the camera button when turning device on.
OK, I think there's been a miscommunication.
1.) Download the RUU
2.) Get into bootloader mode (You get to bootloader mode by pressing the camera button when turning device on.)
3.) Connect your phone to your Laptop or PC
4.) Execute the EXE ON YOUR LAPTOP OR PC and follow instructions.
That's what we're trying to say. Hope it helps!
PURESKILLZZZ said:
I cant flash it as phone doesnt turon on pass 1st boot screen...
Click to expand...
Click to collapse
Remove your battery. Reinsert you battery. Holding camera button press the On button. That should put you in bootloader mode. Everytime I've been this bad (and it happens every so often with the weird ROM's I screw with) I have to use the 1.05, nothing else works.
Good luck!
Dr Puttingham said:
Remove your battery. Reinsert you battery. Holding camera button press the On button. That should put you in bootloader mode. Everytime I've been this bad (and it happens every so often with the weird ROM's I screw with) I have to use the 1.05, nothing else works.
Good luck!
Click to expand...
Click to collapse
blazoner said:
OK, I think there's been a miscommunication.
1.) Download the RUU
2.) Get into bootloader mode (You get to bootloader mode by pressing the camera button when turning device on.)
3.) Connect your phone to your Laptop or PC
4.) Execute the EXE ON YOUR LAPTOP OR PC and follow instructions.
That's what we're trying to say. Hope it helps!
Click to expand...
Click to collapse
vippie said:
I don't think you're in the bootloader mode when you try. The screen should be three colored and when connected to USB it should say USB at the bottom of the screen.
As mentioned before. You get to bootloader mode by pressing the camera button when turning device on.
Click to expand...
Click to collapse
Thanks fellas ... That was all I needed was that simple routine to get to bootloader mode...

Repair bricked Touch? How?

Hi..
Yesterday, i where to flash my Touch with a new ROM. But before the flashing was done, the Touch frooze completely, and now when i power it on, it stays on the "smart mobility" screen.
So... anyone know's if it's possible to fix this or what?
Please help me
BazookaAce said:
Hi..
Yesterday, i where to flash my Touch with a new ROM. But before the flashing was done, the Touch frooze completely, and now when i power it on, it stays on the "smart mobility" screen.
So... anyone know's if it's possible to fix this or what?
Please help me
Click to expand...
Click to collapse
Better to post this in the ELF forum mate
Good luck!
Hold the red and green button down and press and hold the power/reset button on top and wait until a screen pops up.
ludester said:
Hold the red and green button down and press and hold the power/reset button on top and wait until a screen pops up.
Click to expand...
Click to collapse
I've done that. It dosn't help.. I don't think i've got a ROM in my device now.. How can i flash it then?
BazookaAce said:
I've done that. It dosn't help.. I don't think i've got a ROM in my device now.. How can i flash it then?
Click to expand...
Click to collapse
Typically you put it in bootloader mode and then reflash as normal. Are you not able to get in to bootloader mode?
blazingwolf said:
Typically you put it in bootloader mode and then reflash as normal. Are you not able to get in to bootloader mode?
Click to expand...
Click to collapse
I can on a good day.. The phone is very unstable for the moment.. But when i try to flash a new ROM from Bootloader, Active Sync can't detect the device. Is that normal?
The phone is unlocked, and it shows "USB" on the screen when i plug the USB in Bootloader..
BazookaAce said:
I can on a good day.. The phone is very unstable for the moment.. But when i try to flash a new ROM from Bootloader, Active Sync can't detect the device. Is that normal?
The phone is unlocked, and it shows "USB" on the screen when i plug the USB in Bootloader..
Click to expand...
Click to collapse
Yes. All you have said above is absolutly normal. When you see the "USB" just flash it. Have you ever flash your device before?
cronexy said:
Yes. All you have said above is absolutly normal. When you see the "USB" just flash it. Have you ever flash your device before?
Click to expand...
Click to collapse
Jepp, i have! So thank you so much! I'll keep you updated!

I Can't use Recovery Mode or Bootloader... Nothing and I need make a Hard Reset

Hi guys, I'm from Brazil and I have a problem with my nexus.
For mistake, I made a flash on a Moto X2's Bootloader, is possible I make a Hard Reset or Flash Stock Android?
I Can't enter in Bootloader using Volume Down + Power...
Detail: It's without back cover
HueBR Inc said:
Hi guys, I'm from Brazil and I have a problem with my nexus.
For mistake, I made a flash on a Moto X2's Bootloader, is possible I make a Hard Reset or Flash Stock Android?
I Can't enter in Bootloader using Volume Down + Power...
Detail: It's without back cover
Click to expand...
Click to collapse
Try this, see if it may help. What happens when you boot your device, or when you go to bootloader?
http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983
You can flash stock android but you would have to go to bootloader and flash stock image available from:
https://developers.google.com/android/nexus/images#occam
HueBR Inc said:
Hi guys, I'm from Brazil and I have a problem with my nexus.
For mistake, I made a flash on a Moto X2's Bootloader, is possible I make a Hard Reset or Flash Stock Android?
I Can't enter in Bootloader using Volume Down + Power...
Detail: It's without back cover
Click to expand...
Click to collapse
Are you sure about your buttons is working? (I'm saying it because my volume buttons broken and I didn't noted it, thought was a rom problem and was trying to go to the bootloader).
Also you can try to recognize it in adb or fastboot and boot into a recovery mode or bootloader.
LoveSick55 said:
Are you sure about your buttons is working? (I'm saying it because my volume buttons broken and I didn't noted it, thought was a rom problem and was trying to go to the bootloader).
Also you can try to recognize it in adb or fastboot and boot into a recovery mode or bootloader.
Click to expand...
Click to collapse
Hou Can I Try to recognize it in adb or fastbook?
It is with TWRP
Connect the phone to a win7 computer. Does a device appear in device manager with the qhusb_bulk or something like that? If it does, the phone is hard bricked.
To get into fastboot, press volume up, volume down, and power button.

P9Lite dead screen?

Hi, my screen doesn't seems to work. I wanted to downgrade from Nougat, so i flashed oeminfo and then rebooted and installed b130 l-21 firmware. Installation reached 100% but then it tell an error and i there was just a button to reboot, so i pressed it and after that, black screen. Charging led not working too. By the way, i don't know why, but my phone is booting only in fastboot mode, even if i force reboot by holding power button, the device is rebooting in fastboot. I re-unlocked the bootloader and then tried to flash b160, but it seems like it din't flash nothing, because when i type "fastboot getvar rescue_phoneinfo" it says that i'm on B130. Any idea?
Edit: DC-Phoenix unlocker says that "battery state: 0" is this ok?
xDavi01 said:
Hi, my screen doesn't seems to work. I wanted to downgrade from Nougat, so i flashed oeminfo and then rebooted and installed b130 l-21 firmware. Installation reached 100% but then it tell an error and i there was just a button to reboot, so i pressed it and after that, black screen. Charging led not working too. By the way, i don't know why, but my phone is booting only in fastboot mode, even if i force reboot by holding power button, the device is rebooting in fastboot. I re-unlocked the bootloader and then tried to flash b160, but it seems like it din't flash nothing, because when i type "fastboot getvar rescue_phoneinfo" it says that i'm on B130. Any idea?
Edit: DC-Phoenix unlocker says that "battery state: 0" is this ok?
Click to expand...
Click to collapse
Disconnect the cable, after Dload b130, b160 or b.... then press volume + and power.
No longer hold power when the screen starts.
Recovery huawei wipe factory rest and wipe cache reboot.
Chisetdel31260 said:
Disconnect the cable, after Dload b130, b160 or b.... then press volume + and power.
No longer hold power when the screen starts.
Recovery huawei wipe factory rest and wipe cache reboot.
Click to expand...
Click to collapse
Thank you, but if i try to install with 3 button method i can't see if it's actually installing because the screen is black.
xDavi01 said:
Thank you, but if i try to install with 3 button method i can't see if it's actually installing because the screen is black.
Click to expand...
Click to collapse
How old is your phone and we're you from ?
Kcetin20 said:
How old is your phone and we're you from ?
Click to expand...
Click to collapse
I bought it about 1 month ago, and i'm from Italy.
xDavi01 said:
I bought it about 1 month ago, and i'm from Italy.
Click to expand...
Click to collapse
http://consumer.huawei.com/minisite/it/vipservice/index.html
Call huawei and ask for Huawei VIP they will pickup the phone and return it back.
Since you're under warranty its for free. i just sended my phone today was also black screen.
Kcetin20 said:
http://consumer.huawei.com/minisite/it/vipservice/index.html
Call huawei and ask for Huawei VIP they will pickup the phone and return it back.
Since you're under warranty its for free. i just sended my phone today was also black screen.
Click to expand...
Click to collapse
Even if i have unlocked bootloader? Or do i need to relock it?
xDavi01 said:
Even if i have unlocked bootloader? Or do i need to relock it?
Click to expand...
Click to collapse
push stock recovery and relock it and call them
Kcetin20 said:
push stock recovery and relock it and call them
Click to expand...
Click to collapse
Thank you, i'll try to call this service and then i'll let you know how's gone
xDavi01 said:
Thank you, i'll try to call this service and then i'll let you know how's gone
Click to expand...
Click to collapse
You're wellcome good luck.
xDavi01 said:
Thank you, i'll try to call this service and then i'll let you know how's gone
Click to expand...
Click to collapse
Any news from your device ? My device is repaired no funds or payments...monday i will receive it
Kcetin20 said:
Any news from your device ? My device is repaired no funds or payments...monday i will receive it
Click to expand...
Click to collapse
Oh, yea, i finally got my device working again without using warranty, but i had to pay 15€ for the DC-Phoenix flash service. With that service i could flash any file that is into an .app instead of just flash system, boot and recovery with classic fastboot method. So i downloaded b161, flashed it and my screen came back again!

"Error updating for slotselect" in Recovery mode on Samsung Galaxy A73 5G

I want to boot the phone to bootloader mode. However, when I come to the recovery mode, it says "[libfs_mgr]Error updating for slotselect" at the very bottom of the screen.
If I continue to choose Reboot to bootloader, it prints the same error message again a second time, and very quickly (less than 1s) reboots to the OS. So I can't go to the bootloader.
If anyone knows what happen and how to fix it, please help. Many thanks.
My phone is a totally new one:
- Model: Samsung Galaxy A73 5G
- Code name: SM-A736B/DS
d_t_kien said:
I want to boot the phone to bootloader mode. However, when I come to the recovery mode, it says "[libfs_mgr]Error updating for slotselect" at the very bottom of the screen.
If I continue to choose Reboot to bootloader, it prints the same error message again a second time, and very quickly (less than 1s) reboots to the OS. So I can't go to the bootloader.
If anyone knows what happen and how to fix it, please help. Many thanks.
My phone is a totally new one:
- Model: Samsung Galaxy A73 5G
- Code name: SM-A736B/DS
Click to expand...
Click to collapse
same issue with flip z 3
any solve for this problem yet ?
rassam said:
same issue with flip z 3
Click to expand...
Click to collapse
I have the same problem on the SM-A528B and any rom that installs even the originals with the bootloader locked to the original settings, still, my tele keeps blinking as if it had superimposed images... If anyone has a backup of the ROM STOCK, obviously without the data and EFS and can make it available I would appreciate it, I think it's some partition error, but so far I haven't been able to find any tutorial to clean and reinstall from scratch...
eslam.essa.2011 said:
any solve for this problem yet ?
Click to expand...
Click to collapse
This is what i did to solve
from PC adb reboot recovery --> Reboot to recovery
Select reboot to bootloader ---same time press both volume up and down and press power key to select.
somehow booted to bootloader downloading mode..try and update, thanks.
ansaziz777 said:
This is what i did to solve
from PC adb reboot recovery --> Reboot to recovery
Select reboot to bootloader ---same time press both volume up and down and press power key to select.
somehow booted to bootloader downloading mode..try and update, thanks.
Click to expand...
Click to collapse
Thanks it really works
ansaziz777 said:
This is what i did to solve
from PC adb reboot recovery --> Reboot to recovery
Select reboot to bootloader ---same time press both volume up and down and press power key to select.
somehow booted to bootloader downloading mode..try and update, thanks.
Click to expand...
Click to collapse
Thanks it really works
Marcelo Rock said:
I have the same problem on the SM-A528B and any rom that installs even the originals with the bootloader locked to the original settings, still, my tele keeps blinking as if it had superimposed images... If anyone has a backup of the ROM STOCK, obviously without the data and EFS and can make it available I would appreciate it, I think it's some partition error, but so far I haven't been able to find any tutorial to clean and reinstall from scratch...
Click to expand...
Click to collapse
ansaziz777 said:
This is what i did to solve
from PC adb reboot recovery --> Reboot to recovery
Select reboot to bootloader ---same time press both volume up and down and press power key to select.
somehow booted to bootloader downloading mode..try and update, thanks.
Click to expand...
Click to collapse
Podrías ayudarme a hacerlo?

Categories

Resources