hello,
- I wanted to upgrade my 2020i using bluetooth
- I started MaUpgradeUt_noID.exe, but then it entered a screen with only serial and a versionnumber and the app on my pc does nothing.
- tried opening battery and resetting and it restarted, but now when I press reset it goes back to the serial screen.
- after automatic install (when I don't press reset it still resets automatically) Anyone got any ideas?
you have to upgrade your 2020i only usung usb cable for it and all will be ok do not cry, first you have to put your device in bootloader mode
that is all
Related
My usb cable detached during the rom update ... now it won't start and neither soft or hard reset works.
Please ... any suggestions
Plug it back in and re-run the update
It won't start so it makes no connection to active synch on the pc
Have you tried the boot loader mode. TO activate this mode, hold down the power button, lights button and press the reset button. The screen should go blank and have serial written on it. Once you plug in the usb, this will change to USB. Start the update again.
thanks both of you - worked and so relieved.
thought it was kaput!
hi there,
i bought this phone off ebay from someone who said i can reflash it to work.
it appears that the phone is realy dead.
The phone starts at&t splash appears, seems that it boots ok, however another splash screen appears saying GOODBYE and the phone powers off itself.
i tried to connect the phone on my PC with no luck. Used all the drivers and instructions through various forums but it appears that the phone is only found as "unknown device"!
When I try the Bootloader mode, I get :
*USB Downloader-Xcingular V1.2
[Phone] Active OFF
If i press left soft key + camera + power button, it boots into some other menu that has the windows moobile logo and on the very top it says:
Hit space or "0" to enter configuration
then if i press other buttons on the mouse it lists the following and after a few seconds it boots and powers off as in normal mode.
OEMLaunch BOOT Version : i607UCGD
INFO: Launch Windows CE .NET by jum
is there a solution to this stupid flash or shall i keep the accessories and battery and throw it in the garbage.
cheers
tio
Unfortunately no one has yet discovered a way to recover from this (flashing the wrong eboot to the phone)
If you are going to discard it, I would be willing to pay shipping etc. to see if I could resurrect it.
how would you go about doing that man?
i could resurrect it too if it was possible.
would a serial cable do the job?
is it the bootloader the problem?
is it that the phone cannot be recognized by the PC?
what is the problem here actually?
...using SPB backup!??! I installed it...ran the backup utility...it restarted...but not all the way...it hangs on the windows mobile screen. No amount of soft resets have worked...it won't connect via activesync...and trying to hard reset is doing nothing.
Help?
craiggers14 said:
...using SPB backup!??! I installed it...ran the backup utility...it restarted...but not all the way...it hangs on the windows mobile screen. No amount of soft resets have worked...it won't connect via activesync...and trying to hard reset is doing nothing.
Help?
Click to expand...
Click to collapse
Try taking out the battery for a min or so.
Then replace and let it reboot.
tried that already..believe me...any other suggestions?
its not bricked...flash it with your original rom.
it won't connect via activesync. no activesync -> no flashing official rom.
Hold down the power button and the camera button while hitting the reset button. your phone should then boot into the tricolor boot screen. connect to your pc and reflash as needed....AS will not see your phone but the ruu will
...
unplug the usb cable, pull out your battery, put it back in, hold down your power button and camera button at the same time, your phone should be on the tricolor screen now (bootloader)
plug the usb cable in and reflash your phone.
Hi Everyone!
I got the following problem with my Charmer:
The previous guy, who had this phone, flashed it with a wrong ROM. The phone hangs at the T-mobile splash screen. I beleived that I can fix this problem, because I made this with my Charmer earlier. (Thanks for rmagyar's Charmer rescue kit). But at this time, when I put the phone into bootloader mode to use the rescue kit, there is no usb connection. It can't be charged, and the PC doesn't see the phone.
Any ideas, how to flash the rescue kit? Can I get back the usb connection?
I have same problem, anyone know?
try this, plug usb cable in PDA, press and hold power+camera button, tick RESET 5 sec and release reset button, but hold power+camera. if you see left side screen USB release power+camera button. it work for me, may be helped you!!!
I am sorry, I have this problem on my Xperia X1, but maybe someone from there have an idea...
Check:Start->Setting->NetworkConnection->WindowsMobile-basedDevice :
If Disabled than restart PC.
Hello! Same problem...
My L5 is making me crazy... It has CyanogenMod 10 nighlty. A friend of mine was using it and he tried to install the GAPPS after he did a factory reset. I have no idea what guide he used but it got soft bricked... It's constantly showing a "stopped working" message and after a while reboots by itself.
I tried to do a factory reset but it always returns to the same point, same apps installed, everything like the reset never happened. I even used CWM to reset it and it allways goes back to the same recovery point.
After a while I decided to flash a stock room but here's the problem: I can't get into emergency mode.
After reading ALL post about it I found that there's at least three ways of entering EM, (1) down VOL and plug in usb cable without battery; (2) down+up VOL and plug in usb; (3) down+up VOL + power botton.
Conclusions:
(1) - gives me a screen full of code like a command line
(2) - White screen
(3) - White screen
I've read ALL the unbrinking post on the internet, including xda, and none of them helped.
The KDZ Updater never recognizes the phone. I installed all the drivers but everytime I plug in the phone it installes the same LGE MTP drive...
Can anyone help, please?!
How to enter Emergency mode? How to flash another rom?