new Cingular 8125 - 8125, K-JAM, P4300, MDA Vario General

It has 2.25 ROM code. I want to load the blackberry compatible ROM code. I have tried both unlock tools here and cant seem to get it to work. I am sure its something that I am doing wrong so could really use some help.
I have followed the steps and they say unlocked but then there is a write error. Then I get the following error when I try to just run the rom upgrade exe
"ERROR [296] : UPGRADE ONLY
I'll post again with the exact errors but in the meantime if you have any suggestions please let me know.
Thanks

http://forum.xda-developers.com/viewtopic.php?t=33796
if all else fails downgrade to a 1.x rom on the ftp server, then run lokwiz.. then after it completes successfully then you can upgrade..

What tool do I use to downgrade to the older code? each of the RUU's that I try error out saying upgrade only.

I ran the aWiz tool and get the below error:
ERROR: ITWriteDisk - An internal error occurred.
I had also installed the enablerapi.cab before running the e: enable rapi
Full cut and paste
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:e
* Please FULLY (wait for a while 1st) connect your Wizard to the PC with USB Act
iveSync connection,
* then press [Enter] to start, or q to main menu:
MachinaGod RapiUnlocker v1.0
Initializing.........Done!
* Press [Enter] to continue
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:u
* Please connect your Wizard to the PC with USB ActiveSync connection,
* then press [Enter] to start, or q to main menu:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[15:23:54.25] MachinaGod lokiwiz start
Copying C:\Temp\8125\aWizard\lib\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=24: 4758a458 - 60231547f0615b52
Key idx: 24
olddata: c3ed99e06b35b4ae413277d3b404f24af3d0c04d95add7b38eeee02a7a8ffabf
newdata: fd7c6c72ecc22980ae409660572350da6e676d671dcfe5a46e676d671dcfe5a4
newsum=f3505ea9 encsum=7221e4dc8e58fd8c
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
[15:24:13.55] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
* Press [Enter] to continue

Related

need help cant make full backup (g4) cingular8125 sim & cid unlocked

need help cant make full backup (g4) cingular8125 sim & cid unlocked
--------------------------------------------------------------------------------
I have tryied everything nothing had worked I'm able to Backup OS & Extended Rom. Not a nubby even doing sd backup happens same thing I can make individual backup like IPL, SPL, Extended Rom, OS ect. But I want full backup and I cant. When I use aWizard it does great job but on the radio.nba part this is the message that comes out. I have tryied everithing all the programs availables on all forum this has been a 8 day proyect please some one can help me. HELP HELP HELP HELP HELP HELP HELP HELP HELP. ITS A CINGULAR 8125 (G4) UNLOCKED SIM & CID BY CHECK-IMEI. PLEASE SOMEBODY ANY ADVISE.
THIS IS DOING IT WITH SD
r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
Start address = 0x80000000 , Length = 0x800
Start address = 0x80000800 , Length = 0xC0000
Start address = 0x800C0800 , Length = 0x40000
Start address = 0x80100800 , Length = 0x280000
GSM - dwSize = 345DF
GSM Page0
Start address = 0x4E3D4C0 , Length = 0x3900000
Start address = 0x743D4C0 , Length = 0xA00000
The read size is not matched, load failed!
Some Image (8) load failed, we can not backup All images...
Cmd>
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:B
* Backup Wizard ROM Version 1.0
* Please enter the name of "folder" to save the ROM image to (e.g. "QT-1_6_3_4-W
WE"), no space pls
* Then press [Enter], or q to to main menu:radio
* Backup Radio ROM? (y/n/q):Y
* Backup OS ROM? (y/n/q):N
* Backup Extended ROM? (y/n/q):N
* Backup Splash ROM and HTC Logo? (y/n/q):N
* Please make sure the following before running this option:
* - your have connected your Wizard to the PC with USB ActiveSync connection,
* - already run the option 'e' at least once after the last time you hard reset
the Wizard
* then press [Enter] to start, or q to main menu:
[14:29:32.28] Backup Radio ROM [ROM\radio\radio-Radio.nba] Start
* This process takes about 5 to 8 minutes depends on CPU Speed.
* Please wait.....
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 39 07 01 06 27 2c 17 3e 17 05 06 ec
CopyTFFSToFile(0x50000, 0x280000, ROM\radio\radio-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
[14:30:18.59] Backup Radio ROM [ROM\radio\radio-Radio.nba] End
Press any key to continue . . .

"Downgrading" from WM6

Hi there
Just curious to know if there is any way I can downgrade my Typhoon (an Orange SPV C500) following the WM6 upgrade I did. I would take it back to the software version obtained from http://www.orange.co.uk/c500patch/. When I try just running it, I get an error about communications which I guess is due to the bootloader I installed before upgrading to WM6.
Cheers
Dom
1)
Download http://rapidshare.com/files/54448481/SPL-1.01.0064.zip
While you're in WM6 do the following:
Run TyphoonNBFTools.exe Goto
Tools Menu
----------
* Immediate Flashing Popup Menu is enabled
- Test Immediate Flash : test the reliability of the flasher. This is done automatically when
flashing a critical section.
Right click on SPL / Emergency flash is enabled : flash the bootloader of the device with this one - VERY DANGEROUS
Thanks to arisme for the tutorial
2)
Run the MTTY
* type: info 2
* type: format BINFS
3)
Close the MTTY, and run wm2003 rom.
Good Luck
The steps for REVERT to WM2003SE from WM6 (or WM5 as well)
are explained here:
http://forum.xda-developers.com/showthread.php?t=279464
...initially I have big problem to find this steps (In particular SPL 1010064).
Follows the steps of the link:
for me NO PROBLEM TO REVERT FROM WM6 ANDOT IMAGE to WM2003SE I-MATE IMAGE.
Thanks for you help guys, but unfortunately I have a problem! Have explained in the original downgrade thread here.
i have some questions can i downgrade to the wm 2003 Rom that i hadit before ?
Profy_X said:
i have some questions can i downgrade to the wm 2003 Rom that i hadit before ?
Click to expand...
Click to collapse
yes U can.....If U r downgrading from ANDOT's WM6 to WM2003,
Follow these steps:
1. Run SPV Services and check whether U have super CID or not...(it must be Super CID i-e CID unlocked......
2. run Typhoonnbftools and emergency flash the phoen with provided SPL 1.01.0064 nbf file.... Once flashing is done... turn off ur phone, and disconnect it from USB
3. kill wcescomm and rapimgr via Win XP task manager
4. Run Mtty142.exe and click the USB button...A command prompt like windows will pop up
5. Type info2
6. Typeformat BINFS (in capitals is BINFS, case sensitive)
7. dont turn off or reset Ur device now.....just close Mtty and run the official upgrade (i used orange's from the site given above)
U R DONE

Can't unlock CID using Lokiwiz03

Hi!
Im willing to flash my rom using a dumped OSRom.nb with pdocwrite util. The thing is that I read all the warnings about locked CID in the aWizard thread http://forum.xda-developers.com/showthread.php?t=252957&highlight=awizard
And it turned out that aWizard uses the same pdocread and pdocwrite as I do. So naturally I want to CID un-lock my hw6915.
But theres the thing I cant!
Bootscreen shows only 2 numbers
1.00.00
1.50
No SPL or IPL. I guessed that my hw6915 is G3 because of the 2 repeating zeros, but who knows. So I wanted to get into the boot loader command promt but nothing worked
action button + power + reset (all at the same time for a few seconds) is Useless.
So can someone please tell me how to determine the IPL/SPL or get into the boot loader mode or how to get my whatever G CID un-locked. The lokiwiz errors from aWizard are as follows:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[ 5:50:22.76] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ERROR: ITReadDisk: outbuf==NULL
reading lock_backup.bin:
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: Unable to open host/destination file - The system cannot find the file sp
ecified.
result=80072746
[ 5:50:29.06] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
* Press [Enter] to continue
rx-8 You read for what device Lokiwiz03 ??????
Where is written that this works at 6915?
Read description of the program and do not try to use on your device!
No readme file
Well actually the zip file with Lokiwiz does not contain a readme file, but I suspect that it originally was meant for Wizard but other user with different phones have reported that it had worked on their phones. So after a week of reading the forums I came up only with this cid unlocker. I guess desperation took over me... Anyways can you suggest other utility?

Multi-OS basic version (Windows, Linux and console)

From IOICN: http://www.ioicn.com.cn/forum/thread-270017-1-1.html
Simple translation by Black-Xstar: http://www.black-xstar.com/blog
Author: yifengling0
Special thanks: dysxq
First, the necessary conditions:
1.dopod 5x5 mobile phone (the best use dopod 565, NO TEST other model, maybe rocker can not be used.)
2.SPL 39m version (because we calling function in spl, if you DOTNOT USE 39M SPL, VERY DANGEROUS.)
3.SD card (linux mirror and wince XIP boot from SD card)
Second, preparatory work:
1.Backup your person information!
2.download pack.zip decompression all files to SD card ROOT. (NO TEST 2G and above SD card)
3.use rom in wm6.zip to flash you mobile phone.
Third, how to use:
After flash rom, reboot you system ,you can see this menu:
1 Windows Mobile 6.1
2 Linux
3 Typhoon Bootloader
4 Debug Console
5 Reboot (WARM)
6 Reboot (COLD)
7 Power Off
Special note:
3: reboot menu from SD card
4: debug console full screen, you can input some command to operate hardware
Fourth, console introduction
# key: spaces
* key: RUN
green phone key: letter C. command start letter, input c0, press # key, can get help.
left key: letter A
right key: letter B
home key: letter D
back key: letter E
red phone key: letter F
camera key: backspace
------------
DOWNLOAD:
wm6.zip (ROM) : http://www.mediafire.com/?i5a2xzztmtj
pack.zip: http://www.mediafire.com/?xewlyyaeu3f
------------------------------------------------
my English is very POOR,maybe have some mistakes, you can see chinese version and translate with google.
picture here: http://forum.xda-developers.com/showthread.php?t=388231
translate by beerjordan0 @ http://forum.xda-developers.com/showthread.php?t=388264
This is a guide to upgrade HTC Feeler/Typhoon/Amadeus to dual os,
1.downloading the new 0109spl and then and flashing the new spl to your phone,the same as upgrading to wm6 of 39m.
2,downloading our dual os rom,you can download it at http://www.mediafire.com/?i5a2xzztmtj
then flash it on your phone by mtty, it's all the same as upgrading to wm6 of 39m.
3.downloading the pack files ,the url: http://www.mediafire.com/?xewlyyaeu3f
Now extract the pack files and copy them to your minisd card
4 turn on your mobile,enjoying it
Click to expand...
Click to collapse
so great but when will dual OS come to us?
Black-Xstar said:
From IOICN: http://www.ioicn.com.cn/forum/thread-270017-1-1.html
Simple translation by Black-Xstar: http://www.black-xstar.com/blog
Author: yifengling0
Special thanks: dysxq
First, the necessary conditions:
1.dopod 5x5 mobile phone (the best use dopod 565, NO TEST other model, maybe rocker can not be used.)
2.SPL 39m version (because we calling function in spl, if you DOTNOT USE 39M SPL, VERY DANGEROUS.)
3.SD card (linux mirror and wince XIP boot from SD card)
Second, preparatory work:
1.Backup your person information!
2.download pack.zip decompression all files to SD card ROOT. (NO TEST 2G and above SD card)
3.use rom in wm6.zip to flash you mobile phone.
Third, how to use:
After flash rom, reboot you system ,you can see this menu:
1 Windows Mobile 6.1
2 Linux
3 Typhoon Bootloader
4 Debug Console
5 Reboot (WARM)
6 Reboot (COLD)
7 Power Off
Special note:
3: reboot menu from SD card
4: debug console full screen, you can input some command to operate hardware
Fourth, console introduction
# key: spaces
* key: RUN
green phone key: letter C. command start letter, input c0, press # key, can get help.
left key: letter A
right key: letter B
home key: letter D
back key: letter E
red phone key: letter F
camera key: backspace
------------
DOWNLOAD:
wm6.zip (ROM) : http://www.mediafire.com/?i5a2xzztmtj
pack.zip: http://www.mediafire.com/?xewlyyaeu3f
------------------------------------------------
my English is very POOR,maybe have some mistakes, you can see chinese version and translate with google.
Click to expand...
Click to collapse
EMAX black-xstar?
My WQX,My 从前
where can i download the SPL 39M?
Does it work on my SDA Music (Amadeus) ??
how is this rom? had anybody tried it?
where can i download the SPL 39M?
Does it work on my SDA Music (Amadeus) ??
afshin_a said:
where can i download the SPL 39M?
Click to expand...
Click to collapse
where 2 get?
That ROM doesn't work on any machine but dopod 565
Because the Keyboard driver doesnot match.

error spl

here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Try This!!!
schnieder said:
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Click to expand...
Click to collapse
try this,
here's an experimental program I made to make the process more automatic so users can fix their own wifi without our help.
this is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
thank you for the answer
I tried with mtty and mac1.zip
here are the step
Cmd> task32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
I do not have the mac address of my wifi on the label of my pda so I put j 11 11 11 11 11 11 is what it must have the real mac address
I do not know what to do
It's been 4 months I'm looking for a solution for my pda
help me please

Categories

Resources