need help cant make full backup (g4) cingular8125 sim & cid unlocked - 8125, K-JAM, P4300, MDA Vario General

need help cant make full backup (g4) cingular8125 sim & cid unlocked
--------------------------------------------------------------------------------
I have tryied everything nothing had worked I'm able to Backup OS & Extended Rom. Not a nubby even doing sd backup happens same thing I can make individual backup like IPL, SPL, Extended Rom, OS ect. But I want full backup and I cant. When I use aWizard it does great job but on the radio.nba part this is the message that comes out. I have tryied everithing all the programs availables on all forum this has been a 8 day proyect please some one can help me. HELP HELP HELP HELP HELP HELP HELP HELP HELP. ITS A CINGULAR 8125 (G4) UNLOCKED SIM & CID BY CHECK-IMEI. PLEASE SOMEBODY ANY ADVISE.
THIS IS DOING IT WITH SD
r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
Start address = 0x80000000 , Length = 0x800
Start address = 0x80000800 , Length = 0xC0000
Start address = 0x800C0800 , Length = 0x40000
Start address = 0x80100800 , Length = 0x280000
GSM - dwSize = 345DF
GSM Page0
Start address = 0x4E3D4C0 , Length = 0x3900000
Start address = 0x743D4C0 , Length = 0xA00000
The read size is not matched, load failed!
Some Image (8) load failed, we can not backup All images...
Cmd>
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:B
* Backup Wizard ROM Version 1.0
* Please enter the name of "folder" to save the ROM image to (e.g. "QT-1_6_3_4-W
WE"), no space pls
* Then press [Enter], or q to to main menu:radio
* Backup Radio ROM? (y/n/q):Y
* Backup OS ROM? (y/n/q):N
* Backup Extended ROM? (y/n/q):N
* Backup Splash ROM and HTC Logo? (y/n/q):N
* Please make sure the following before running this option:
* - your have connected your Wizard to the PC with USB ActiveSync connection,
* - already run the option 'e' at least once after the last time you hard reset
the Wizard
* then press [Enter] to start, or q to main menu:
[14:29:32.28] Backup Radio ROM [ROM\radio\radio-Radio.nba] Start
* This process takes about 5 to 8 minutes depends on CPU Speed.
* Please wait.....
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 39 07 01 06 27 2c 17 3e 17 05 06 ec
CopyTFFSToFile(0x50000, 0x280000, ROM\radio\radio-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
[14:30:18.59] Backup Radio ROM [ROM\radio\radio-Radio.nba] End
Press any key to continue . . .

Related

mtty.exe & host11.exe ( flashing tools by HTC )

Hi All,
Maybe this is old hat, but is good to know.
I've seen these two programs on the internet made by HTC for the Ipaq:
1) mtty.exe = Multi-Port/USB TTY Version 1.10 2001 by HTC
2) host11.exe = Remote USB update 1.1
The first programme mtty.exe is a flashing utility made by HTC to flash the boot loader ( only *.bin files ) using the serial/USB cable for the Ipaq ( after a reboot using the Wallaby boot loader menu the Ipaq/XDA is connecting in the same way as using the Hyperterminal, spiting all the information about the hardware version and then looking for a *.bin file, containing the boot loader, if found it will start flashing the boot loader).
The second programme host11.exe is a flashing utility also made by HTC to flash the CE Rom only, via Usb, after a reboot using the Wallaby boot loader menu and pressing the “Volume button” on the left side of the XDA (sorry I don’t remember the button on the Ipaq ), will bring you the “Remote USB update 1.1” menu on the XDA as well on the Ipaq. If you have a file named “nk.nb0” located in the same directory with host11.exe, containing the CE Rom for the Ipaq ( probably it will do the same to the XDA) , it will start upgrading the CE Rom.
My question would be, if we can use these two programs to flash the XDA ( using the “wboot515.bin” file to flash the boot loader and “nk.nbf” – contained in Program A ver 3.17.03 CE Rom O2 UK, that we could edit with Ultraedit, cut the first two lines, save it and rename it “nk.nb0”, to flash the CE Rom ) as an alternative to the SD card flashing method ?
Please see down under a small procedure for the IPAQ.
I’ve got these info searching the Ipaq forums.
Mendo
Download the host11.exe file from here:
http://www.ultimatepocket.com/images/host11.exe
I have the mtty.exe program if you can't find it on the internet.
A very good explanation about the Ipaq upgrade using mtty.exe and host11.exe, english document:
http://www.wince.com.br/ftp/ipaq2002v214.doc
These are the links I've used for general info:
http://www.handhelds.org/z/wiki/HosT11
http://www.xonio.com/features/feature_unterseite_8750206.html
http://hardware.pchome.net/2002/07/13/3435.htm
I find this part of the upgrade procedure for the Ipaq very interesting:
-----------------------------------------------------------------------------------
Step 1- Check Pocket PC for Boot loader version number.
A) Establish a physical connection between your iPAQ and Desktop (Serial port). Use the "serial Auto-Sync Cable".
B) Open downloaded software folder. Execute the mtty.exe program on your desktop. Dialog box appears, select appropriate COM port settings. (i.e. COM1, COM2).
C) Press the speaker (game pad button) & reset button (Bottom right corner, you will need your stylus to get to the reset button.) at the same time.
D) Release the reset button, but ensure that you hold the speaker button until you see a parrot. On your desktop (Mtty.exe), you will see the following message being displayed:
******************************************************
InitDebugSerial using SERIAL PORT 3
******************************************************
Main=8C094D30
pTOC=FFFFFFFF
Init SCInitSerial
SCInitSerial-
HTC Integrated Re-Flash Utility for Strong ARM (Macaw) Version: 2.31
This version could be used for Parrot PPSH board to flash boot load
Built at: Mar 8 2001 13:40:39
Copyright (c) 1998-2000 High Tech Computer Corporation
CPU speed = 206 MHz
DRAM speed = 103 MHz
Main- no CF card
FW 0:4:38>
E) Note the Version Number. Since the Version number is 2.31 you will need to upgrade it to 2.43.
Step 2- Upgrade Boot loader Version.
A) Ensure that the mtty.exe & the file mboot241.bin are in the same folder or directory.
B) At the FW 0:4:38> prompt, type "l MBOOT241.bin" (Type as is, minding the case). A new boot loader will be flashed. This will enable one to flash the OS using the USB rather than serial. Since, flashing the OS by serial takes about 30 minutes to complete. The USB connection takes about 4 minutes. IMPORTANT!!!!! Don't remove the cables during this process. This process takes about 1min.
C) Due a cold reset of the device (Bottom right corner, you will need your stylus to get to the reset button).
D) You can check if the program was a success by repeating step 1 C and D. Note that the version number has changed.
-------------------------------------------------------------------------------------
It looks that is posible to use the USB cable to flash the boot loader, not only the serial cable.
Again I am interested if these things are good for the XDA as well, of course using the right boot loader and CE ROM files, as mentioned before.
Bootblaster utility for Ipaq ( very interesting, it would be good to have one for XDA):
http://www.hardce.com/htmlcn/CN/document/023/BACKUP_IPAQ_ROM.htm
Download from here:
ftp://ftp.handhelds.org/pub/linux/compaq/ipaq/v0.30/BootBlaster_1.18.exe
How to flash CE ROM image to the device via USB cable?
Initial condition: Windows 2000 or NT platform. The code being flashed and the flashing tool need to be put under the same directory.
1. Disable USB connection from the Connection Settings in Active Sync
(Uncheck the box for “ Allow USB connection with this desktop computer” )
2. Enter bootloader mode of the device by pressing down power button and soft reset at the same time.
3. Press Record button on the side of the device to enter USB Flash Mode
4. Plug in USB cable to the device, launch “mtty110 – USB” flashing tool and then choose USB port to start re-flashing.
5. Press Enter. Enter command to flash CE image when USB> is present. The command is l followed by the bin file name. For example,
USB> l wallaby233busa_2s.bin
6. After code-flashing process is finished, the device needs to be hard reset to ensure the old version is being overwritten.
How to flash CE ROM image to the device via serial cable?
Initial condition: The code being flashed and the flashing tool need to be put under the same directory.
1. Disable the serial COM port from the Connection Settings in Active Sync (Uncheck the box for “allowing serial cable or infrared connection to this COM port” )
2. Launch MTTY flashing tool
3. Connect the device with a desktop vial serial cable and enter bootloader mode by pressing down power button and soft reset at the same time
4. Enter command to copy CE image when FW> is present. The command is l followed by the bin file name. For example, FW> l wallaby233busa_2s.bin
5. After code-flashing process is finished, the device needs to be hard reset to ensure the old version is being overwritten.
How to flash Bootloader to the device via serial cable?
Initial condition: The code being flashed and the flashing tool need to be put under the same directory.
1. Disable the serial COM port from the Connection Settings in Active Sync (Uncheck the box for “allowing serial cable or infrared connection to this COM port” )
2. Launch MTTY flashing tool
3. Connect the device with a desktop vial serial cable and enter bootloader mode by pressing down power button and soft reset at the same time
4. Enter command to re-flash bootloader when FW> is present. The command is l followed by the bin file name. For example, FW> l wboot507.bin
5. After code-flashing process is finished, the device needs to be hard reset to ensure the old version is being overwritten.
How to flash CE ROM image from the device to SD card?
1. Disable the serial COM port from the Connection Settings in Active Sync (Uncheck box for allowing serial cable or infrared connection to this COM port)
2. Launch MTTY flashing tool
3. Connect the device with a desktop via serial cable and enter bootloader mode by pressing down power button with soft reset at the same time
4. Unplug serial cable from the device, insert 64MB SD card and then plug in serial cable again.
5. Enter command “r2c” to copy CE image to SD card. For example, FW> r2c
6. The message “SD flashing is success” is displayed after the process is finished.
How to flash CE ROM image on SD card to the device?
1. Insert SD card to the device
2. Enter bootloader mode by pressing down power button and soft reset at the same time
3. Press Action button to start SD flashing
4. Message indicates SD flashing is finished. Again, the device needs to be hard reset to ensure the old version is being overwritten.
How to flash GSM code via serial cable?
1. Disable the serial COM port from the Connection Settings in Active Sync (Uncheck box for allowing serial cable or infrared connection to this COM port)
2. Connect the device with a desktop via serial cable and enter bootloader mode by pressing down power button with soft reset at the same time
3. Launch Monitor flashing tool
4. Click “Target” on the menu bar, and choose “Connect…”
5. Enter bootloader mode again when seeing a message to switch on the target
6. Click on “Flash”, Choose “Erase all applications+ bootloader” the last option in the dropdown list
7. Click YES to start flashing
8. Hard Reset the device to ensure the new code overwrites the old one.
and where can I find the BIN file for example ("wallaby233busa_2s.bin"). Upgrading by USB is my only chance (broken SD card slot in MDA)
i have mistakenly installed a T-Mobile ROM on my O2 XDA n i want to switch back to the XDA Developers Special Edition ROM. For some reason the T-Mobile ROM doesnt let me use the setup they have. The SD Card method does not work for me since i do not have an external SD Card writer. Can i use mtty and host11 to do this? Where do i get the bin files that you mentioned?
thanx for your help
Hi Countster,
It's been a while since I was playing with my XDA.
The files I was talking "mtty" and "host11", you can find them on the Internet or post a message on the forum (I use to have them on an old PC in the office but I've lost them together with the bin ROM file), but I also never had to use the USB flash application, back then I was only preparing for the worst case, but my XDA never failed durring the upgrade.
But the best metod as far as I know is the one using an SD card (buy an external SD card reader from Ebay, it's only 15Euro max.)
I found this post on the net and these guys are having problems using the USB tool:
http://www.pdastreet.com/forums/showthread.php?threadid=21433
http://goodhyun.com/archives/2004/08/how_to_dump_new.php
My advice is to use the XDA forum for info and the SD card metod, because as far as I can remember it was the best.
The cooked ROM file should be available somewhere, on the forum.
If you decide to use the host11.exe, you might have to delete (trim) the first two rows of the "rom.bin" file and rename it "nk.nb0" (you need to open the file with an "bin to hex editor" and then delete the two hex encoded rows).
In the case of the T-mobile/O2, the flash application they are using to flash the XDA it is checking, validating and then trim the rom.bin file, after this it will flash the XDA.
A very important thing to know is that it hasn't been confirmed that the "host11.exe" works with the XDA (it might work only with the IPaq).
Apparently it might work to download the file but it is also important at what address (hex address) in the XDA flash memory, the program starts to write the firmware (the bin file). The danger is to overwrite the bootloader or part of it ( the bootloader is like your PC Bios) and this will destroy your XDA , because it wont boot any more and it wont communicate on any port.
I hope that your XDA it is still booting and you haven't lost the boot loader ( it is the worst case ).
My final advice, don't use the host11.exe but instead use the SD metod.
Regards,
Mendo
hmmm seems dangerous.. either i have to RTFM or try to get the SD card writer. thanx for your help!
How to dump new rom image into ipaq using host11.exe
If your OS upgrade image came with UpgradeUT.exe, I mean if you tried to upgrade your ipaq and got the popup screen "HP ROM UPGRADE Utlity v3.15" then the .nbf files couldn't be inserted directly using host11.exe
Certainly, there is a situation you want to dump the rom image into iPaq in a straightforward manner, not guided by the fixed routine. in that case, you have to trim your file's unnecessary portion.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Delete these inversed part and rename it to nk.nb0,
then set your ipaq to the usb memory upgrade mode and run host11.exe.
don't forget to kill activesync when you do this.
goodhyun (2004年08月02日 23:31) Technology
TrackBack
TrackBack URL for this entry:
http://goodhyun.com/mt/mt-tb.cgi/240
*************************************************************
For the XDA, the nk.nbf file should look like this, in the Ultraedit viewer (use Ultraedit to open the file and edit/save it):
00000000h: 50 57 31 30 41 31 2D 45 4E 47 2D 33 2E 31 37 2D ; PW10A1-ENG-3.17-
00000010h: 30 30 31 2D 38 37 32 2D 2D 2D 2D 2D 2D 2D 2D 2D ; 001-872---------
00000020h: FE 03 00 EA 00 00 00 00 00 00 00 00 00 00 00 00 ; þ..ê............
00000030h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000040h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000050h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000060h: 45 43 45 43 00 10 0A 8C 00 00 00 00 00 00 00 00 ; ECEC...Œ........
Remove this bit "PW10A1-ENG-3.17-001-872---------" (the two hex lines too)
Then save the file and rename it "nk.nb0", then set your XDA to the "USB memory upgrade mode" (using the bootloader menu shortcuts) and run host11.exe.
Don't forget to kill activesync when you do this.
*************************************************************
Be carefull, this procedure can make your XDA useless, I've not done this myself on my XDA, this is info from the net.
Use this metod only if Programme A metod fails and don't use it to upgrade the radio stack.
Regards,
M
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=406&PN=1
Message << Prev Topic | Next Topic >>
Posted By mottile on 23-Dec-05 at 06:51 Quote
Hi,
I have ipaq 3870. I upgraded to wm2003 using host11.exe and a rom image found in emule. But i had problems with certain software on it, so i decided to go back to 2002. I erased the 32 bytes from the beggining of the rom file, and used host11.exe.
My problems:
No asset tag and SN
No model information when trying to run official rom upgrade.
I have original backup, but i cannot flash it with official upgradeut.exe
motti
Posted By basf on 24-Dec-05 at 16:31 Quote
um .... I seen the communicaiton for this problem in this site before.
edit the rom nk.nb0, offest 01ff000ah to be your asset number.
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=50
Now what you need is file to upgrade to WM2003 (I don't know where to get now because hp thailand did not support to upgade or sell the upgrade file/Chan).
Upgrade file are compose of 3 files.
1. host11.exe - This program is to flash rom
2. nk.nb0 - rom data or firmware file
3. readme.txt - the method to flash rom
Then you need Hex Editor such as UltraEdit-32 (if you don't have one, try search google.com) to Edit nk.nb0.
UltraEdit-32 will show 3 parts,
First "0xxxxxxxh:" (shown the line and address of data)
Second in the middle is data in hex (on top there is ruler from 0 to f but if you can not see just go to set at menu at view > display ruler), then you can see at first line or address at 01ff0000h: = 31, 01ff0001h: = 00, 01ff0002h: = 2E, 01ff0003h: = 00, 01ff0004h: = 31, ....
Third is "ASCII CODE"
Picture 1 show Mark at Address 01ff000ah
Picture 2 show Mark at Address : 01ff0e00h
At this point that we have to change data in file nk.nb0, start from 01ff000ah: to 01ff0020h:
The original file "nk.nb0" show "ASCII CODE" in that position are "4.G.2.3.D.W.3.4.M.1.N.0". These numbers are Asset Tag # and Serial # that you have to use from your ipaq, can be found at the back at S/N.
Then Click at "ASCII CODE" in the position of Address that you want to change, this case have to click at number 4. Then key input the first digit of your ipaq S/N, then click at G and key input your second S/N until finish all number.
You also have to do the same thing at address 01ff0e00h to 01ff0e14h.
If complete correction all numbers, just save the file.
Next is to disable active sync, there are two method:
1. At Microsoft ActiveSync at PC, Click at File > Connection Settings... > "Unmark" (Click to uncheck) at CheckBox "Allow USB connection with this desktop computer" > OK.
or
2. End Process "wcescomm.exe", call "Windows Task Manager" by press three botton Ctrl, Alt, Del then at Tab "Processes" Click at "wcescomm.exe" then click at "End Process" botton.
Now at ipaq 38xx have to set in Mode "Remote USB Update"
Press botton 2 (Default : Contacts Button) and botton 4 (Default : iTask Button) and Power on botton then use stylus press at Reset (small hole at bottom of ipaq) wait until on the screen has message " Remote USB Update"
Put ipaq to usb cradle, and connect battery charger ac adapter for safty purpose.
Then Run "host11.exe"
(If the message "USB Lost connection" come out continuous, that means the connection has a problem, just take out ppc from cradle, retart your pc and reset PPC, then make PPC Mode to "Remote USB Update" then try runing file "host11.exe" again)
Start to update, now at 7 %
Nearly finish.
If there is no problem flash rom process will be finish as the message "Flash Done." at PC.
At PPC screen.
Then take out PPC from cradle and soft reset it. Now the screen of PPC will be pink color and Version of OS in the right bottom will be 4.00. Then wait for a while, everything will be as we just hard reset.
(in cause the screen in pink color wait too long, just do hard reset, vai presss at botton 1 (Default : Calendar Button) and botton 4 (Default : iTask Button) then use stylus press at reset, then wait till pink screen come again.)
Finally, you are now using WM2003 with your ipaq 38xx.
====================
If you use method 1 to disable usb of microsoft active sysnc.
You have to enable USB at Microsoft ActiveSync to sync all data back from PC to PPC.
- Connect PPC to USB Cradle
- Call Microsoft ActiveSync at PC
- Click ??? File > Connection Settings... > Click at botton Get Connected...
- Microsoft ActiveSync, check at CheckBox "Allow USB connection with this desktop computer"
- Then the program will ask for Set Partnership (I used default name as "Pocket_PC")
If you use method 2 of disable usb.
- Call Microsoft ActiveSync at PC
- Connect PPC to USB Cradle
- Click ??? File > Connection Settings... > Click at botton Get Connected...
- Microsoft ActiveSync, check at CheckBox "Allow USB connection with this desktop computer"
- Then the program will ask for Set Partnership (I used default name as "Pocket_PC")
====================
# Finally, you have ...
iPAQ 38xx "Old one" but "new OS" that change from PPC2002 to WM2003 (or Windows Mobile 2003) and Asset Tag # ??? Serial # are still the same as before.
To Check Asset Tag # and Serial #, at PPC Tap Start > Settings > System > Asset Viewer > Identity.
What you will fine new thing from PPC2002.
- Beautiful Bluetooth Icon.
- New Connections at Setting... may make you a little confusing.
- New bar of set volume.
- One more game, Jawbreaker (from only Solitaire).
- Faster Add/Remove Program.
- Overall are faster
====================
# Thanks to K. ImHoTep so much to suggest me many thing untill I can solve all problem.
# and thanks to K. pat2545 that guide me at first.
# and thank to all members that test and exchange experience in the forum.
(I have to thanks to K.Shine so much for contributing the detail method/howto, that make thing much more easier/Chan)
mendo said:
Download the host11.exe file from here:
http://www.ultimatepocket.com/images/host11.exe
I have the mtty.exe program if you can't find it on the internet.
A very good explanation about the Ipaq upgrade using mtty.exe and host11.exe, english document:
http://www.wince.com.br/ftp/ipaq2002v214.doc
These are the links I've used for general info:
http://www.handhelds.org/z/wiki/HosT11
http://www.xonio.com/features/feature_unterseite_8750206.html
http://hardware.pchome.net/2002/07/13/3435.htm
Click to expand...
Click to collapse
I'll be very gratefull that you send mtty to [email protected]
I have problems with hp 5550

new Cingular 8125

It has 2.25 ROM code. I want to load the blackberry compatible ROM code. I have tried both unlock tools here and cant seem to get it to work. I am sure its something that I am doing wrong so could really use some help.
I have followed the steps and they say unlocked but then there is a write error. Then I get the following error when I try to just run the rom upgrade exe
"ERROR [296] : UPGRADE ONLY
I'll post again with the exact errors but in the meantime if you have any suggestions please let me know.
Thanks
http://forum.xda-developers.com/viewtopic.php?t=33796
if all else fails downgrade to a 1.x rom on the ftp server, then run lokwiz.. then after it completes successfully then you can upgrade..
What tool do I use to downgrade to the older code? each of the RUU's that I try error out saying upgrade only.
I ran the aWiz tool and get the below error:
ERROR: ITWriteDisk - An internal error occurred.
I had also installed the enablerapi.cab before running the e: enable rapi
Full cut and paste
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:e
* Please FULLY (wait for a while 1st) connect your Wizard to the PC with USB Act
iveSync connection,
* then press [Enter] to start, or q to main menu:
MachinaGod RapiUnlocker v1.0
Initializing.........Done!
* Press [Enter] to continue
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:u
* Please connect your Wizard to the PC with USB ActiveSync connection,
* then press [Enter] to start, or q to main menu:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[15:23:54.25] MachinaGod lokiwiz start
Copying C:\Temp\8125\aWizard\lib\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=24: 4758a458 - 60231547f0615b52
Key idx: 24
olddata: c3ed99e06b35b4ae413277d3b404f24af3d0c04d95add7b38eeee02a7a8ffabf
newdata: fd7c6c72ecc22980ae409660572350da6e676d671dcfe5a46e676d671dcfe5a4
newsum=f3505ea9 encsum=7221e4dc8e58fd8c
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
[15:24:13.55] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
* Press [Enter] to continue

Testing if CID unlocking was successfull??

Hi, Im having trouble unlocking my CID.
According to awizard it should be ok but Terraterm tells me otherwise. Im using terraterm to backup my firmware directly to my miniSD card but it wont let me. According to another forum, it means CID was not unlocked. Please help?
my aWizard output:
---
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[ 4:33:09.28] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=52: b8124838 - 86af7c25d4133564
Key idx: 52
olddata: 1366e7e34185ec1f460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=ee928866 encsum=5a3282e33b2f38b4
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
[ 4:33:24.94] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
====
TerraTerm Output:
====
Cmd>r2sd all
***** user area size = 0x79280000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific imag
===
Doesnt this mean my CID is still locked?
Yes you're right, it's not unlocked. In my signature is a tried and true method.
Good luck!
Dr Puttingham said:
In my signature is a tried and true method.
Good luck!
Click to expand...
Click to collapse
yup i can vouch on it

[Q] Upgrading & HardSPL problems

Hi everyone,
It happened to me a lot of strange things. I tried to upgrade my herald with a rom from Tribulattifather . The first thing I've done is to install Hardspl. I connected my phone lauched the .exe and it gave me an error by 1%. My phone was freezed with a white screen. I waited a long time and shut it down. From this moment it won't restart and I can only access to the rgb menu:
IPL 1.08.0001
SPL 1.08.0001
When I try to re-install the hardspl or the installer recomended in this post it raised an ERROR [300]: INVALID UPDATE TOOL.
For information I haven't got a SD card and I've done all this by USB cable.
Can enyone tell my how to continue?
Thank you very much,
The Aslan
It seems that nobody can help me?
So as I saw that nobody answered me I bought a microSD card 2Go.
I tried to create a Gold card.
I formated it in FAT32 with a ppc programm installed on an htc TyTn named : storage tools v 2.5.
Did the steps 1-8 sucessfully:
View of Steps 7 & 8:
C:\itsutilsbin>psdread -l
C: - VMware Virtual S
Drive geometry: 0x414 cyls, 255 t/cyl 63 s/t 512 b/s - 8.00Gbyte
disknr=0 fixed disk
D: - TOSHIBA DVD-ROM SD-M1401
Copying C:\itsutilsbin\itsutils.dll to WCE:\windows\itsutils.dll
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
C:\itsutilsbin>perl typhoonnbfdecode.pl -p cardid=00a90045d536008047323055534453
30 -p keys=tornado -p seclevel=0 -d goldcard.img
blversion 1.0.0.0
docuniqueid
entrycount 0
magic HTC$TYPH-666
cardcrc=834ebbec
C:\itsutilsbin>psdwrite -1 goldcard.img 0 0x120
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
CopyFileToSDCard(goldcard.img:00000000, 1, 0x0, 00000120)
I insterted it in my phone... Nothing appens it don't recongnize the mSD.
I tried with RevSkills 2.04.4 and I've the same problem: all is done fine but my Herlad p4350 don't view the mSD when I go into the 3 color screen.
I need help please it is important.
The Aslan said:
It seems that nobody can help me?
So as I saw that nobody answered me I bought a microSD card 2Go.
I tried to create a Gold card.
I formated it in FAT32 with a ppc programm installed on an htc TyTn named : storage tools v 2.5.
Did the steps 1-8 sucessfully:
View of Steps 7 & 8:
C:\itsutilsbin>psdread -l
C: - VMware Virtual S
Drive geometry: 0x414 cyls, 255 t/cyl 63 s/t 512 b/s - 8.00Gbyte
disknr=0 fixed disk
D: - TOSHIBA DVD-ROM SD-M1401
Copying C:\itsutilsbin\itsutils.dll to WCE:\windows\itsutils.dll
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
C:\itsutilsbin>perl typhoonnbfdecode.pl -p cardid=00a90045d536008047323055534453
30 -p keys=tornado -p seclevel=0 -d goldcard.img
blversion 1.0.0.0
docuniqueid
entrycount 0
magic HTC$TYPH-666
cardcrc=834ebbec
C:\itsutilsbin>psdwrite -1 goldcard.img 0 0x120
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
CopyFileToSDCard(goldcard.img:00000000, 1, 0x0, 00000120)
I insterted it in my phone... Nothing appens it don't recongnize the mSD.
I tried with RevSkills 2.04.4 and I've the same problem: all is done fine but my Herlad p4350 don't view the mSD when I go into the 3 color screen.
I need help please it is important.
Click to expand...
Click to collapse
right it's not recognized, i tried that.... on my Dopod C800/Wing/Herald
is this what you did?
1. Plug the MicroSD card to any working windows mobile phone?
2. Sync the working WinMo to PC.
3. do the perl thing psdread, perl typhoonn, psdwrite, and done right?
4. Copy any RRU/MOD/.nbh ROM to the MicroSD and rename it to heraimg.nbh
5. This time what's inside the MicroSD is the heraimg.nbh only
you tried to boot it, ooohhhhh.. it's not working.. just the 3 color screen.
and this the alternative way to solve.
if you downloaded the heradiag.nbh
1. Remove the MicroSD and plug it to card reader, or to your other WinMO.
2. Copy the heradiag.nbh
3. now there are 2 files your heradiag.nbh and your heraimg.nbh
4. plug again your MicroSD to your brick herald/wing/C800.
5. do the bootloader thing
6. there you go, you will be in diagnose mode.
7. select the flash.
8. the rest is yours to understand.
and your done.
--------------
If you successfully unbrick the phone.
download the HardSPL from Tribulattifather.
http://rghost.net/download/1209299/...609840c3c0331d88971/HardSPL (Wing-Herald).zip
extract all files, and read the PDF file, do what exactly it says.
Thank you SmaRkieS for your answer.
I couldn't post a reply while I had no time this two last weeks.
What you said me didn't work. I bought a MicroSd card reader and created a goldcard with a french topic. Worked well but I've an error when he cheks the SD contents, blue bar, red message : Invalid certificate. I tried with revskills and other heraimg.nbh but it's always the same error.
Did you know already this problem? how can I go on?
Best Regards
The Aslan
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
So, after weeks and weeks searching, reading topcis and trying solutions I've finnaly succeed.
If anyone is interested, here are my steps:
First I read a topic were I found a SPL.nbh in a dutch rom, renamed it in HERAIMG.nbh and with my goldcard flashed it. Then I looked for an original french Herald rom: flashed it. I installed Hardspl (before put the three cabs up on the phone). Finally installed the rom of Tribulattifather.
My herald works fine yet.
Thank you for your replies,
Best regards,
The Aslan
Hi The Aslan
i'm having the same problem & same IPL & SPL as yours ,but i'm still stuck in the bootloader for a week & i can't flash any ROM , so can you plz give me IN DETAILS all what you did starting from the GOLD CARD till the ROM you installed .
I need help please it is important.
Best regards,
elnakah
Hi elnakah,
Here are my steps to unbrick the herald:
First download the dutch rom, take the SPL.nbh out and rename it HERAIMG.nbh. Put it on your goldcard with the heradiag. With the heradiag flash it. ( You will have the IPL at 1.08 and the SPL at 4.1)
Then, do a Hardreset; you can see the message who says : format sucessful or something esle and an image with the logo of htc will appear and desappear very quickly and you will return to the bootloader.(With the heradiag you have the possiblity to format your device in FAT you can do it but it's optional and just to be sure)
Flash an ORGINAL default rom
If it works, install correctly the hardspl.
Flash any rom you want
I hope I've helped you,
Regards,
The Aslan

[Q] i can not enable my wirless

after upgrading my spl 1 in htc hermes (i mate jasjam) to spl 2.1 then install wm 6.1 the wifi is not working.
I can't turn on wifi. When I touch in switch it do not on. I already made several hard resets and this does not result.
some one solve that problem in this Thread:
http://forum.xda-developers.com/show...490681&page=34
****ok finaly it's all ok
i have read an eeprom good
so here the solution
load in your trinity olipro1.30
open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)
at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00
save file
now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000
reset
and enjoy****
but the problem that this thread for htc trinity and i have imate jasjam
i have maked the same step and when want to convert the "nb" file in mtty i write this command:
lnb trin100.nb 500a0000 400
mtty told me:
unkonwn cmd command!!
some one asked the same qusition and they told him:"you have had olipro1.30 in your mobile" and i can not find olipro1.30 for jasjam
pleas i need your help!!!!!

Categories

Resources