i was upgraded my t-mobile mda I to wm2003 4.01.12 eng successfully, and it's work for 5 days, but now my device appeared to have problem with this OS,
the light was turned off, and when i tried to soft reset it, it's won't start.. the screen showed O2 bootstart, n the light blinking every 10 seconds..
today screen appeared after 5 minutes later, but the light still turning off...
and the respond become very slow makes me sure that it has a serious problem on it...
note: this was occured after i installed clearnotify from scarybearsoftware...
actually, i'd like to uninstall it, but the device won't respond to the tap.
problem solved!
thank's anybody on xda-developers, problem solved....
keeep it good, dude...!
How did you solve your problem? ;-)
Hi,
My Atom-Exec decide over the weekend to go to a white screen and display nothing. i can hear things going on in the background (i.e beeps etc) but cant see anything. it sync with the PC so i'm guessing it may be hardward.
i tried a soft reset but cant see anything so cant confirm that i am doing it right. also tried taking out the battery for a couple of days but no luck.
Any ideas?
Cheers,
sunnyd
Most likely the screen is broken.
hi
are you try hard reset ?
White screen again and again
I know this post is quite old, but I can't find a clear answer about this problem...
My Atom stop with a white screen (colored,thin lines appear on the screen.Then the screen slowly turns to white)...
I must remove the battery and reset it to launch it again
I tryed everxthing... ROm update from the original firmware, PDAVIET (3 version on WM5 an WM6)
lot of resets, hard and soft...
This problem appers all the time... but randomly... 1 hours, 5 hours or 2 days after a reset....
Can you help me...
RGS
Fred
Good Day..
I Was flashing my phone with aserg method...
half way the phone freezed...
no it will not turn on at all..
i did had before sometimes little problems to turn it on...
The Question : Can a Os Update Breake Your Phone In A Way That It Won't Even Go On?
thanks
nbyz said:
Good Day..
I Was flashing my phone with aserg method...
half way the phone freezed...
no it will not turn on at all..
i did had before sometimes little problems to turn it on...
The Question : Can a Os Update Breake Your Phone In A Way That It Won't Even Go On?
thanks
Click to expand...
Click to collapse
Yes it can, I had it two days ago. Just run the WM6 RUU of your native Herald language. then upgrade to the OS you wanted to flash, remember, always flash the official WM6 first before you flash an OS the ASerg way!
how can i install the RUU if the phone won't turn on?
nobody knows?
You have to put your device in bootloader mode, do this by pressing and HOLDING
the camera button, then press soft-reset key.
Then connect to PC via USB cable, no need for ActiveSync connection.
Then just run nthe RUU upgrade. happy flashing
HELP!!
Mine won't boot too. Please help.
bellatrixue said:
Mine won't boot too. Please help.
Click to expand...
Click to collapse
Try a soft reset first, press the soft reset button under the volume slider, if this does not work, try a hard reset (remember you will lose all data!)
to hard reset press and HOLD the camera button, and press soft-reset once.
If this still did not work, then just flash to your native language ROM
You don't understand...it won't boot at all...
Dutch : Zo dit is wat makkelijk dutchman...hij gaat gewoon helemaal niet aan hoelang je het aanknopje ook indrukt snap je>?
Exactly
It wont start at all. It happen once and tried all methiod een try other buttons and it booted but now its totally dead. can 't even get to the boot loader.
have you tried to put out the battery, wait 10 minutes and put it back. then make a hardreset....
i guess i read this somewhere on other devices..
good luck
nbyz said:
You don't understand...it won't boot at all...
Dutch : Zo dit is wat makkelijk dutchman...hij gaat gewoon helemaal niet aan hoelang je het aanknopje ook indrukt snap je>?
Click to expand...
Click to collapse
I understand it perfectly, you don't have to have an OS that boots, just follow my instructions!
It can't even go to the Bootloader
hard reset won't work. bootloader reset won't work. battery left out for 15, 30, 1 hour, 1day doesn't work either.
bellatrixue said:
hard reset won't work. bootloader reset won't work. battery left out for 15, 30, 1 hour, 1day doesn't work either.
Click to expand...
Click to collapse
I think your device battery must be charged again, after some hours charging you can do following instruction above.
Good luck!
bellatrixue said:
hard reset won't work. bootloader reset won't work. battery left out for 15, 30, 1 hour, 1day doesn't work either.
Click to expand...
Click to collapse
That's totally bs, you can enter the bootloader! if you really really can't, then your device has a hardware failure. just press the camera button (and hold it) and then press soft reset, keep holding the camera button!
that's no BS i have the same problem! i know how to do a reset and how to enter bootloader but the device doesn't respond at all!!!
BS?
If its was BS, i wouldn't be coming here in the first place. And i know how to hard reset, soft reset, and getting into boot loader. i know the soft keys - - and the camera button. and i know how to pole the stylus
well i think it is a hardware failure it happened before but during a meeting i had at the office my hands was pressing all the buttons, and i can't remember which and it turned on. but it turned dead again and it wouldn't even turn on.
thanks anyways
very very strange i tried it today again, when i insert the usb cable or adaptor, the red light blinks one single time and then nothing:S no sound no screen nothing.. i left it in the charger and the accu is warm so it looks like it does charge:S i'm really confused
Nobody knows what this means?
sorry, posted in wrong thread
bricked forever...
nbyz said:
very very strange i tried it today again, when i insert the usb cable or adaptor, the red light blinks one single time and then nothing:S no sound no screen nothing.
Click to expand...
Click to collapse
I'm sorry, to tell but....
After reading all your posts to me it looks like your device is bricked forever due to corruption of the bootloader.
The bootloader ist the most essential part of your device. It is the softwarepart that does the real flashing by reading from USB and transfer the data into memory storage hardware. If this part gets accidently erased, overwritten or elsehow corrupted, there is no software, no button-press-procedure that can bring your device back to live.
The only thing you can do, is bringing your Herald in for service. In such cases, they normaly replace the whole circuitboard that holds the flash memory.
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
AgentBignose said:
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
Click to expand...
Click to collapse
It seems to be broken.Go to service.
Tadeusz said:
It seems to be broken.Go to service.
Click to expand...
Click to collapse
Yes I also think so.
Do you know how long it takes to let an Athena Repair?
hello,
i have a vodafone diamond,
my problem is : it doesn't start up
when i press te power buton it turns on, after 10 seconds is off and it goes atomatich on and then again after 10 second it turns off
what muss i do, i can't start my daimond anymore ...
Have you tried doing a Hard reset? that'd be the first thing I'd try.
help
he doesn't want start up. i see only the vodafone logo and than it's turn off, how do you than do the hard reset if i cant start up, in don't see the windows mobile 6.1 green screen
srry for my bad english , i'm dutch
THMS said:
he doesn't want start up. i see only the vodafone logo and than it's turn off, how do you than do the hard reset if i cant start up, in don't see the windows mobile 6.1 green screen
srry for my bad english , i'm dutch
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2492097&postcount=9
help
I've try it but is doesn't work ...
to me it's probably a battery issue : during the first 20 sec at start up the only power supply comes from the battery. When my battery is very very low then it happens to me exactly what you described above.