Related
So Yesterday for no reason at all my 8525's screen went white. i thought it had frozen or some thing but it didn't snap out of it. I pressed the ok button on the side and could hear noise. I decided to restart. Nothing. Did this like 7 times. Finally I let it sit without the battery for like an hour. I worked but the colors were all messed up. Reset and it worked fine. So i set my alarm went to sleep and woke this morning to an email and a white screen. Turning it on and off a couple of times did it and I was already frustrated.
Then I read on a forum about Activesync automatically opening throughout the day to try and connect. So I tweaked that to manual connections. Still the same. So I decided to take advantage of the warranty but I needed to set back my rom b/c as you already know, it voids it. Also thinking that re-flashing might get rid of whatever it was failing in. No, still the same, and now worse. As or an hour ago, my navigation pad doesn't work either. It actually works for about a second when I turn it on and then after I press anything on the pad or surrounding buttons, it's gone.
I really would like to fix it myself at least for now and use the warranty exchange at about 11 months but if theres nothing I can do, I guess I can go get a new one. Also, I don't know if it has anything to do with it, but I downloaded Google Maps to my phone yesterday on the road (through 3G) and that was the only new program installed( I think it mightve been this).
Has this happened to anyone else?
Any help would be much appreciated. I hope I explained enough for anyone to respond. Thank you in advance to anyone with anything really.
Actually if you do a search under white screen you'll find many entries. Any attempt to fix yourself will void the warranty. If you are lucky it may only be the d-pad connector that is loose. This it is possible to check yourself but if have a warranty then I suggesting using it.
Otherwise see the link to my site in my signature for dismantling and service manual guides.
Mike
Thanks. You know I think I will take advantage of the warranty sometime this week. I don't know what happened. But I'm to update my situation. It now seems as though my directional pad seems to be the problem. it glitches on and off and using it sometimes creates the fade-out to white screen. I have to let it go to standby on its own to get my screen back or play around turning it on and off for a bit.
Also, once i re-installed me ATT rom with no applications, my screen seems to be off. I have a 1/32th sliver of the bottom of the screen at the top of my touchscreen. Even in landscape it shows my scroll bar and everything. I didn't even drop it but it is now slightly skewed down. Any input on this?
I also found this website talking about the same problem having with and unorthodox solution (which I tried to no avail). Here's the link if anyone want to check this out. http://www.htcwiki.com/page/AT&T+8525+Display+issues:+Display+is+dim,+blank,+white,+has+lines,+etc.?t=anon
Anyways, I'm gonna call ATT about this see if they can help but I think I will replace, I just didn't want to so soon.
Thanks again for the quick answer.
ckent03 said:
Thanks. You know I think I will take advantage of the warranty sometime this week. I don't know what happened. But I'm to update my situation. It now seems as though my directional pad seems to be the problem. it glitches on and off and using it sometimes creates the fade-out to white screen. I have to let it go to standby on its own to get my screen back or play around turning it on and off for a bit.
Also, once i re-installed me ATT rom with no applications, my screen seems to be off. I have a 1/32th sliver of the bottom of the screen at the top of my touchscreen. Even in landscape it shows my scroll bar and everything. I didn't even drop it but it is now slightly skewed down. Any input on this?
I also found this website talking about the same problem having with and unorthodox solution (which I tried to no avail). Here's the link if anyone want to check this out. http://www.htcwiki.com/page/AT&T+8525+Display+issues:+Display+is+dim,+blank,+white,+has+lines,+etc.?t=anon
Anyways, I'm gonna call ATT about this see if they can help but I think I will replace, I just didn't want to so soon.
Thanks again for the quick answer.
Click to expand...
Click to collapse
Everything they suggest on that site you have tried I guess, the soft and hard resets etc.
I agree with you about the d-pad (directional buttons). Those with this problem often report that the d-pad or it's connector are re;lated to this issue.
Pleased you have chosen the warranty route. You see evn if you opened it up, it can work for a short while and then return again. Also push hard for replacement not repair. They may do this automatically but if not try to persuade them. The reason is that quite a few folks have reported that even after an HTC repair the problem can come back. Actually I think there may be more than one physical cause of this issue and sorting one thing does not mean it won't come back via another route.
The good news is, if you get a good one as I did on the second attempt, I never had white screen or alignment issues - despite heavy use.
Mike
Once again, thank you Mike for all your input. I will be issuing an order for replacement instead of repair. Being at work all day today I've seen that it hasn't "whited' out, if you will, but has actually kept working. Ever so often the d-pad goes but comes back in a few seconds. It may be due to the WM6 i had on it so for now i will keep the original ATT upgrade of WM5 and try to hold off on the warranty as long as I can before it expires. That way I can enjoy a healthy new 8525 longer.
For now I will keep looking around in these forums and see if there ever is a solid solution. Thanks again, and good luck with all.
CKent
Thanks for reading.
I'm currently using WM6.1 on the phone, and loving everything about it.
Since day 1, I've used a phone lock code, along with PIN1 code.
When unlocking the phone for after say an hours inactivity, the keypad will show, then the screen will go blank only showing the top bar of the phone.
Any press of buttons and screen will just make a beeping sound, and so far nothing I've done will restore the keypad to unlock the phone.
Is there anything wrong with the ROM i have, and is there anyone who can suggest how to correct this?
Please remember, the top bar still shows, and a reset allows the phone to work as normal (once logging back into it of course).
Thank you,
Hi guys,
Sorry to bring this back up, but this problem is still going on.
Not sure how to resolve it, so hoping someone would know how to solve this.
Thanks,
Posted twice for some reason.
Maybe is a sw failure,(50%) try to reflash with this fw: RUU_Hermes_CINGULAR_WWE_3625023_6275_1540700_108_UOOS_SVN05_Ship.exe
if your hermes its from att/cingular. after flash open and close the tap of hermes, if the blank screen continues or return this, the failure is hw (the flex component broken,bus, pcb) in this case you need to buy the spare part or send to sat.
good luck
other possible solution
http://forum.xda-developers.com/showthread.php?t=321163
Hi there,
Its not white screening, or anything else, I think the next time it does this, I'm going to have to take a picture, to make sure it can be understood clearly.
Basically, when bringing the phone out of standby (from pressing off/on button) and attempting to enter my pin into the phone the phone will allow me usually to press at least one number of my pin, and then it'll black screen, where the start bar still displays, but no response.
The handset isn't problematic when being opened for use, or anything else, its just annoying to have to reset to load the phone back up again.
I hope this helps?
Further to the above, here is what i've been talking about...
Happened last night, typically as I was bored, and had to wait till morning to take the photo...
Still no movement on this post...
Would it be suggestable to upgrade the install of WM?
If it is, how easy (will read guides beforehand) is it to do (reasonably, hard etc).
Just this is now my only phone, so don't fancy my chances bricking it.
Thanks!
Sorry to be posting yet again, but this has now happened 3 times a in row since last night. I wouldn't mind knowing if a rom fix would sort this, and if so whats the best rom to go for...
Just keen to get this sorted now...
Thanks.
If it helps, I've nothing running when this happens. The exception of last night, where I was using Audio Manager when walking home, and had to soft reset once in the door.
Hi
I am almost certain you have a software fault here and need to reload a new ROM - take your pick - my preference is schnaps - it isnt that hard to do and should solve your problem
Just go to the Windows upgrading section on here and follow the process - you will be happy
John
Anyone else have this problem? Sometimes, if the screen goes to sleep, when I wake it back up, the touchscreen is unresponsive. I have to soft reset to get it to start up again. Any ideas on how to fix it?
I had the same problem, and flashed another rom, and problem gone.
Hello guys,
I was just searching through the forum with this exact problem and found this thread.
If the phone wakes up from sleep the touchscreen is unresponsive for a few seconds. If I insist to press it it only takes longer for it to respond. This is a very big problem because I sometimes miss calls because I can't answer them. Not even the for hard buttons don't work (maybe because they are also touchscreen).
I've tried flashing different ROM's (Miri, Dutty, NRG) even flashed back to the standard one and again back to a 6.5 one (as I saw this step fixes a lot of problems for some people) but the result is the same. I'm running out of ideas.
I don't think it's a hardware issue because if i leave the phone until the backlight dims and touch it, it goes back on, so it registers the press but doesn't act on it.
It's a very serious and I'm hoping someone here has a solution.
Nobody else is having this issue? Is there no hint on what is going wrong with our phones?
It appears it's happening more and more often and the screen is dead for more and more time.
Hi
I have had the same problem but solved tonight
There are many threads about this but no real solution I tried them all.
My first HD lasted till last week when I had to replace it because of a "Newton Ring" problem. In 10 months of ownership I got a screen freeze maybe 5 times.
My new replacement arrived last Saturday - same original Orange Rom and radio.
I have loaded exactly the same programs from the old phone and have found that when I put it in sleep mode via the power button its a 50/50 chance of it waking up. Receiving a text message does not wake it up either.
I can hear the volume control working and the haptic buttons provide feedback - but black screen. If I hold the power button down I get the bleep to ask if I want to power the device off - then all goes dead. If I wait 5 minutes the haptic buttons/volume buttons work again and the screen comes alive revealing the yes/no option to power off.
Also strange whilst in this locked state the orange charging light comes on - when it goes off I know i can wake the screen up !
I tried :
Enabling and disabling the Today Screen timeout
Auto adjust backlight off and on
Different screen brightness
Manual/default operator selection
Checked HD Tweaks settings were correct in registry and things I can't remember.
What has worked :
Start - Settings - System - Power - Advanced and unchecked the box "turn off device if not used for 5 minutes"
The daft thing is this was enabled on my old phone and would always wake up with a text/call or power button push !
What has changed ?
r
Andrew
Update - Found the problem
Whilst the above fixed my freeze problem it has been bugging me why - as the advanced power features are useful and I don't always remember to hit the power button to sleep the device.
I have now realized what was not set up the same as my old phone.
No start up password !
To enable this I found this thread http://forum.xda-developers.com/showthread.php?p=5004821 and changed my registry setting to 0.
This immediately takes you to the lock screen where you can now enter your password details and make them stick.
I now have a start up password and can set the timeout to 24hrs.
All the power settings now work correctly - and no screen freeze
r
Andrew
Spoke too soon
3 hours ago went to use my phone - black screen
Connected via activesync and MyMobileR.
Rebooted and got the "Microp Version Mismatch 0" message.
Checked out threads about this error on the mainly Diamond forum and can confirm my screen is well and truly dead.
Contacted Orange and they are sending another replacement tomorrow.
What p*sses me off is the number of hours I have spent to get one normal days use.
r
Andrew
Sorry to keep posting to this thread - but I am hoping that my experiences may help somebody
As said I am getting a replacement tomorrow and in one of the threads a guy said put it in the fridge for 20 minutes !
Well I thought what the h*ll and did.
Wrapped it in some tissues to absorb the condensation when I took it out - replaced the battery and it works - no Microp message and has behaved ok for 6 hours.
Got to be a hardware issue ?
Your thoughts.............
r
Andrew
Hi Bigfish,
please let me know the phone is still ok after more hours out of the fridge. i have similar problem on my HTC touch- ELF and i have been searching for solution, and i found this
http://www.fixya.com/support/t982721...not_responding .
i do not have tools to open it myself and would like to try it.
if you r familiar with it please let me know.
cheers
M.
Hi
Sorry your link is not working.
As to the phone it was still ok 26 hours later when I had to exchange it for my replacement.
Weird !
r
Andrew
Hi Andrew,
the fridge trick did not work for me. i kept searching for solutions and i found out that the problem is the digitizer (the touch screen). it might have received a shock (dropped on the ground) or other unusual pressure (in the pocket), and the digitizer gets out of initial position. the digitizer takes that contact as a tap -a continious tap- and does not respond to other taps. you might have to open the device and reposition the digitizer or replace it is there is some damage.
cheers
mumur
Sorry to hear that.
My replacement phone - so far has behaved perfectly.
r
Andrew
it strikes me that if I shake the phone that the phone jamming. I get no response. Even when I tap my finger hard against the rear top I get a crash. The only solution is to take out the battery and reboot. I think it has to do with a hardware problem.
there are others who also suffer from it?
I have been having some problems with my leo where i cannot unlock it after coming out of standby. The screen just freezes.
And sometimes when i press the END button to get it out of standby, the key lights come on, but nothing else happens.
Apparently others have this issue too! - check out u-tube video:
http://www.youtube.com/watch?v=wqJw5omurLA
Has anyone else had this or still having this? Do i have to return my phone for another one?
Have you tried a hard reset?
ronald_adi said:
I have been having some problems with my leo where i cannot unlock it after coming out of standby. The screen just freezes.
And sometimes when i press the END button to get it out of standby, the key lights come on, but nothing else happens.
Apparently others have this issue too! - check out u-tube video:
http://www.youtube.com/watch?v=wqJw5omurLA
Has anyone else had this or still having this? Do i have to return my phone for another one?
Click to expand...
Click to collapse
Haven't had the issue. Vaguely read about this somewhere else, might be related to the default WM 6.5 lockscreen. Disable it and try something like S2U2 and see if u still have the same issue.
I have same problem with my device. Is this software or hardware problem? I have to do hard reset, and after that display can be stack. So I have to do soft reset, and phone working. It happens to me 2 times in one day, both times after I have been in room with very bad signal. Maybe that can produce problem. Symptoms are same as on YouTube video.
Does anybody know how to solve this?
i face this b4, it happend few times a day. but after i do hard reset the problem is solved. i think should be installed something conflict with the phone or inproper amended some registry
i used to have this but now it is less common after I have installed WMTask to Close applications when I hit "X" (instead of WM just minimizing the app). In effect it frees up memory and hopefully does cause your HD to struggle for memory when waking up?
guys,
for your info, I installed a new ROM and this didnt help. So it is NOT a SOFTWARE issue. I returned my phone for a new replacement unit and no more issues.
Sorry to say but if u have this problem u need to send your phone back.
I now have no more issues!
Mine has been doing this a lot. Turning it back on just results in the keys lighting up and nothing more.
Work around is to turn on so keys light up, hold down power key until lights all go off, then press power key again ... it will come back to the lock screen.
Thanks for your prompt answer.
It is not seems as memory problem, because if I remove and return battery problem stay. Maybe it can be problem with display driver. Also it is a little strange that after hard reset, I have to do soft reset to get it work again. I not like to change rom version, because it can void my guaranty, and maybe it is hardware problem.
Mine does exactly the same thing once it gets warm. Decided to return it after trying multiple hard resets. ROM changes and S2U2. Made no difference.
As I've joked on this forum before (although it's true), I had to put mine in the freezer to get the screen to work again so it sounds to me like a hardware issue.
Mine's going back for a replacement next week...
HTC HD2 freezes quite often Solution
le_paulo said:
Mine does exactly the same thing once it gets warm. Decided to return it after trying multiple hard resets. ROM changes and S2U2. Made no difference.
As I've joked on this forum before (although it's true), I had to put mine in the freezer to get the screen to work again so it sounds to me like a hardware issue.
Mine's going back for a replacement next week...
Click to expand...
Click to collapse
Well thanks for the solution so if we get that bug , just put your brand new HTC HD2 on the freeser lol
I had similar problem four mornings in a row. Hardware keys would light up but screen dead. Soft reset got it going again, and a hard reset made no difference, even without reinstalling my softwares (I had a clock alarm set for each morning, maybe this is just coincidence). Someone on another forum with a similar issue suggested installing MemMaid, and for me this has worked. Running a regular 'clean' has meant that the problem has not returned, for three days now. So far! I notice that every clean finds many duplicate or invalid 'notifications', not sure if these somehow accumulate and cause the device to crash? Maybe worth trying? So problem for me at least is software related. HTC need to sort this as it is really annoying, and MemMaid is only free as a trial.
dazz29 said:
I had similar problem four mornings in a row. Hardware keys would light up but screen dead. Soft reset got it going again, and a hard reset made no difference, even without reinstalling my softwares (I had a clock alarm set for each morning, maybe this is just coincidence). Someone on another forum with a similar issue suggested installing MemMaid, and for me this has worked. Running a regular 'clean' has meant that the problem has not returned, for three days now. So far! I notice that every clean finds many duplicate or invalid 'notifications', not sure if these somehow accumulate and cause the device to crash? Maybe worth trying? So problem for me at least is software related. HTC need to sort this as it is really annoying, and MemMaid is only free as a trial.
Click to expand...
Click to collapse
I am not quite sure that is software problem, if you done hard reset, and display still not respond on touch.
Soft or hard reset could clear the problem, I just mean that a hard reset didn't avoid the problem coming back. My current ROM is the official 1.48, didn't have this issue on the previous official ROM.
I got confirmation from service today, that it is hardware issue with phone display.
Bogi79 said:
I got confirmation from service today, that it is hardware issue with phone display.
Click to expand...
Click to collapse
How do you know if youre phone should be replaced? Does it happen every time?
This happens to me every so often.
ya, I'm experiencing this as well. real drag!
The same thing happened to me aswell.
I recieved a message and when I tried to unlock the screen, nothing happened. The hardware keys worked but the screen didn't register my touches.
Tried soft reset, didn't work. Removed battery for a while, didn't work. Hard reset, didn't work. Flashed official ROM from HTC, didn't work.
It's been sent for repair. Hope I get it back quickly
I actually don't. But I insist to get phone replaced. I wrote appeal to company where I buy phone. Also I wrote down S/N and IME so I can check if I get new one.
Got the exact same problem, have been complaining about this in different topic here.
Sometimes couldn't unlock screen for many hours... then suddenly works again.
I've tried everything : decreasing/inscreasing screen sensitivity with reg, removing the screen lock, stopping the weather animation as suggested, putting a second finger in a corner while touching the screen : NOTHING WORKS
The only thing i'm convinced : it IS a hardware problem.
When the screen didn't react at all for some hours, sometimes playing with its humidity could help for a few minutes only ( by cleaning the screen with some special wet lcd cleaner or cleaning the screen with some humidity from my breath).
Also i'm travelling a lot (several countries a week)... and noticed THE PROBLEM APPEARS IN COUNTRY WHERE HUMIDITY IS HIGH. (that's also the reason why freezer could help. in a freezer, it's so cold, that the humidity is not in the air anymore, but is in ice state).
MAYBE SOME GOOD NEWS:
I recently bought the HTC screen protection for the HD2 (5 days ago).
Thanks to it, Air humidity doesn't touch the screen directly anymore.
And the problem hasn't appeared, not even once!
I just arrived a few hours ago in the country where i always had the problem (cause of its high humidity), and guess what ? Screen is still working great
I'll keep u up to date if problems come back.... but for now, i really think this is the solution (with logical explanation).
Kaemon.
Hi all,
I seem to be experiancing intermittent problems with my HTC HD2 backlight/screen. When on external power with setting's "Dim after 1 min" and "turn off device after 2 Mins" the phone sometimes works as it should, other times the backlight only dims and the screen does not shut off. Real nuisence when receiving missed call's at night as the dimmed backlight stays on most of the times.
Its been back to HTC twice for repair and it seems to be coming back with the same problem after using it for a little while. On both occasions they have replaced the motherboard even though the fault sheet on the last repair said Faulty backlight. I phoned them up and the operative said the motherboard was replaced. Unless they got confused with the first repair.
However i have come across this thread http://forum.xda-developers.com/showthread.php?t=561832 "Post 10" which has the perfect mod for the registry, this is however aimed towards SE xperia X1 users, but has reference to it also being a HTC problem.
I have tried the following registry edit "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\Timeouts\ACUserIdle: 120"
and it works perfectly just as the device should, the screen dims after 1 min and screen goes off after 2mins. Here comes the problem though, the edited registry values seem to return to there default of "0" when the device is reset or after a prolonged period of time. I am using Resco Registry to carry out the editing.
Is there a way i can get the HTC HD2 to remember/save this registry edit so that when the phone is "soft reset" it does not revert the above key back to Default I thought the registry edit is saved untill a "hard rest" is carried out.
Cheers
I would of thought that someone out of the 72 people that have viewed this thread would of been able to help, maybe im wrong. Im sure this is a common problem, unless im the only one with this bizzare problem. I have tried looking at other threads and none seem to bare the same patterns. Please help me out guyz.
Have a look at Mortscript. It's a scripting tool that allows you to create small text files that run simple commands on your device. You could create one to set the registry value as needed and place it in \Windows\Startup so it runs when you start your phone.
Please! Please! Does anyone have a fix for this? I am in the same boat as the OP. The registry trick works but reverts back after reboot. I hate having to leave the backlight on when my HD2 is connected to the PC. Plus if you press the red button it disconnects from the PC. Hookers & Beer for the man who finds a fix!
eldustman said:
Please! Please! Does anyone have a fix for this? I am in the same boat as the OP. The registry trick works but reverts back after reboot. I hate having to leave the backlight on when my HD2 is connected to the PC. Plus if you press the red button it disconnects from the PC. Hookers & Beer for the man who finds a fix!
Click to expand...
Click to collapse
Errr.... my post was an answer.
Thank you johncmolyneux, i will look into the mortscript program, You reckon it will be hard to write a program for this? i am very suprised that other members on this forum have not come across this problem.
explicitsoundz1984 said:
Thank you johncmolyneux, i will look into the mortscript program, You reckon it will be hard to write a program for this? i am very suprised that other members on this forum have not come across this problem.
Click to expand...
Click to collapse
From what I've seen of Mortscript, it should be pretty simple to do what you want. I've seen many examples around the forums and it was obviously built with ease of use in mind. Just do some searching and I know you'll find what you need.
Good luck mate