Does the atom exec support outgoing call waiting notification if the other caller is on another call?
If so, how do I enable it?
I'm running
ROM: 20060721B1WWE
Radio: R060711N_MN2ARC_RS00011
ExtROM: EX0033
Related
I have installed Motorola HS810 but it doesn't work. On some phone calls HS810 responds late and sometimes answering with XDAII I don't feel for some second. I have tried to load WM2003SE, to install "Pocket Bluetooth Tools" but I have not resolved the problem.
Help!!!! :roll:
O2 XDAII
ROM 2.06.00 WWE
Radio 1.18.00
ExtRom 2.06.100a
I have recently purchased a Parrot CK3000 and a new MDA compact on T-Mobile.
At first all was fine, but after a couple of days, when you get into the car, the MDA would pair up with the Parrot but then take over the car kit as though a call is in progress. The stereo displays CALL and the music is muted. The only way to reset it is to turn the carkit off and back on again as well as the MDA.
I have hard reset the phone and the problem comes back after a coupld of pair ups.
Does anyone else have this problem, or know of a fix.
I have tested the carkit with a Nokia 6310 and it is fine, so I'm sure the problem is with the MDA compact.
I have :
Rom version 1.12.00 WWE
ROM date : 05/28/05
Radio version : 1.12.00
Protocol : 1337.42
ExtROM: 1.12.152 WWE
I noticed that Radio version 1.13.00 is out, but does this have anything to do with Bluetooth.
Parrot and T-Mobile tech support have had no luck fixing the problem.
Any help greatfully received ?
Thanks
Richard
Hi,
I have excactly the same configuration as you. I have ROM 1.12.01! Which Firmwareversion is your CK3000?
I have 1.13. The only problem with this version is a short heavy noise if i make a call. If your problem still exist after firmwareupgrade of your mda,
try to reset your CK3000 (press green and red button for few seconds)
and pair again.
Regards Yoshi
Thanks, I've just upgraded the MDA compact to Rom V1.13.00 WWE and radio 1.13.
I'll let you know if it fixes it.
Help - I have both a Qtek 9090 and a Vodafone V1620 which I use a Jabra BT250V Bluetooth headset with. I have been using all day and then all of a sudden the Bluetooth will disconnect and I can not Longer connect my headset to the PDA.
I have tried a soft reset, unpairing the headset and recreating it but nothing seems to work.
Also I have a collegue who also is having a problem where he can hear the person on the phone but they cannot hear him.
here is the Device information for both devices
Vodafone V1620
Rom Version: 1.31.00 WWE
Rom Date: 12/13/04
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.31.175 WWE
Qtek 9090
Rom Version: 1.40.00 WWE
Rom Date: 03/10/05
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.40.147 WWE
Does anybody have any ideas if this is the PDA's or the headsets
I just recently bought the Jabra BT250v.
The experience is that it is not as good as the previous model BT250 / BT258.
Everytime after softreset, the connection will disconect even the BT icon (not headset icon) is there.
You then have to disable the bluetooth connection and enable it to get the connection back....(softreset is not required though cause u have already done...)
Hope this help..
Cheers,
Just to clarify, is your device (v1620) a Universal? Isn't it supposed to be the v1640? Here in spain it's called the v1640 but not sure from where you are.
If it is a Universal, pls post your POWER settings when running on Battery.
I have a MDA Pro with a benq-siemens BT headset and am having the same problems. My MDA seems to switch off BT after a call.
my power settings are that the phone shuts off when not used for 3 minutes. Does anybody have a solution?
HI Friends
I have a very very peculiar problem. I have a O2 Xda Mini purchased recently in Mumbai, India.
My ROM Versions:
ROM VERSION 1.11.00 WWE
ROM DATE 03/15/05
RADIO VERSION 1.12.00
pROTOCOL VERSION 1337.42
eXTrOM vERSION 1.11.922.WWE
Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 15045.2.6.0)
Previously, when i receive a call, I am able to hear/speak without using a bluetooth/Handsfree Kit.
two days back, when i tried using the handsfree, everything worked fine when call was receieved.. After removing the handsfree, I am not able to use the phone without bluetooth/handsfree.
I tried various options for getting the things worked...Did Soft/Hard reset of the phone. still the problem persists.
When I try to go to Start > Settings >Phone and select a Ring Tone, I cant hear the same from the internal speakers.
But when someone calls me the same ringtone works fine ans i hear the tone without any issues.
Do you know if this is a known BUG with this firmware, or there is some corruption in the registry.
Please Help !!!
Thanx in advance ..
Manmohan
Hewlett Packard ..
India.
Hi,
I had similar problem today. I fixed this when I once again plugged handsfree with Magician switched on and then I removed handsfree (still with Magician switched on).
See also this thread:
http://forum.xda-developers.com/viewtopic.php?t=37185
Hello,
my specs are:
O2 XDA neo (htc prophet) G4
Prophet ShadoW 1.0 Touch Edition GER
Radio 02.19.21
Protokoll: 4.1.13.09
Problem: If I have two bluetooth connections busy, plantronics voyager510 with during call and gps-mouse, i have a horrible lag in my navigation software (about 250-1000 metres at least. The same config works fine with headset just waiting for calls and it works great on a t-mobile sda (my last device).
I tested to activate/deactivate included gps-management, com6/com7, "eingehende daten empfangen" ("receive incoming data")
Any suggestion?
Thanks in advance (and yes, i have used the search-function including google...)
morpheuschen