Hi
I have some oddness going on with my Hermes, but I don't know whether it is a software problem, a ROM problem (I'm running the latest i-mate rom) or an inherent hardware problem.
I keep setting the screen backlight timeout to 1 minute or more (I hate the 10 second default), but as soon as the phone is placed into standby, it reverts back to 10 seconds.
Has anyone else experienced this? Could you try it out for me and report back? I'm so infuriated that I'm about to do a hard reset to see if the ROM is to blame.
BattleTank
Same issue. I have a T-Mobile MDA Vario II. Hard resetting doesn't help. The best I can suggest is that you uncheck the 'turn backlight off after...' That setting does stick. It's a fast way to a flat battery though if you have alarms and reminders going off when you aren't there to acknowledge them and turn the thing off again.
Oh, I'm looking forward to a ROM update...
Out of interest, do you have SPB Diary installed? I'm trying to track down a culrpit, and this is on my 'possible' list.
out of curiosity, would you happen to have goodlink installed? the backlight issue was a know problem with ver. 4.8 and below. 4.9 seems to address this.
No, I don't have SPBDiary.
No, I don't have Goodlink installed.
Installed s/ware:
SPB Pocket Plus
SPB Weather
SPB Backup
eReader
SKTools
Conuits Pocket Player
Resco Explorer (and the ftp and registry editor plugins)
Pocket RTA (real time sound analysis, in case you're interested)
Skype
TCPMP (now there's a great prog which hates the Hermes )
MS Voice Command
XnView Pocket
Interesting - the only overlaps we have are Resco and SPB Backup. I can't imagine that either of these might be responsible.
Another possibility; are you synchronising with an exchange account which automatically enforces policy restrictions? Or do you have a password set?
I did notice that on hard reset the problem went away and, actually, the default became 30 seconds instead of 10. Once I've then restored a backup (made using this same ROM version), it's back to the frustrating behavior and 10 seconds as default.
So, for my next investigation, I'm going to hard reset, then add software one item at a time.
Strange...
So...
I just did a complete rebuild, adding all the same software... and the problem has gone away.
I can think of only three possible explanations:
1. There's a problem with restored SPB backups which is causing this. I know my phone had previously been restored from a backup, and I see also you are running SPB Backup.
2. The problem is still there, but has not appeared yet - a scheduled event (again, possibly a scheduled backup) may trigger it.
3. It was caused not by installed software, but by something that has been installed and the uninstalled. One possibility on my side is TCPMP, which I've previously had installed and I see you also have installed.
I'm inclined to think it's (3), as TCPMP does alter backlight settings by design. One and two can be eliminated with time, so I'll report back.
battletank said:
are you synchronising with an exchange account which automatically enforces policy restrictions? Or do you have a password set?
Click to expand...
Click to collapse
No - no exchange server sync yet. I do have a password set.
battletank said:
There's a problem with restored SPB backups which is causing this. I know my phone had previously been restored from a backup, and I see also you are running SPB Backup.
Click to expand...
Click to collapse
It's a thought. This particular unit has been working on a SPB Backup from the word go. My wife put the previous unit through the wash (3 days old - boo hoo!) so I restored straight onto the replacement.
battletank said:
It was caused not by installed software, but by something that has been installed and the uninstalled. One possibility on my side is TCPMP, which I've previously had installed and I see you also have installed.
Click to expand...
Click to collapse
Well TCPMP is working so badly at the moment that I'm quite prepared to uninstall it. When I have a quite moment in the next few days, I'll give that a go and report back.
martin_ayton said:
battletank said:
There's a problem with restored SPB backups which is causing this. I know my phone had previously been restored from a backup, and I see also you are running SPB Backup.
Click to expand...
Click to collapse
It's a thought. This particular unit has been working on a SPB Backup from the word go. My wife put the previous unit through the wash (3 days old - boo hoo!) so I restored straight onto the replacement.
Click to expand...
Click to collapse
Further to this, I've just restored a backup on my 'newly built' phone and, again, we're back to 10 second timeout. It appears it's down to SPB Backup. I'm raising this with SPB, but there's no reference to it on their website.
BTank
Related
Hey all has anybody else experienced this? when I open up outlook to check emails or text messages outlook's background doesn't load up, I can see on the top bar the name of the inbox I'm currently supposed to be looking at but the background is my today screen. I can send new messages but basically I can't read new ones if I try to touch the screen I activate whatever I hit on my today screen. I took off all my today screen plugins, but nothing, if anyone has any suggestions or ideas, I would appreciate it.
Sounds obvious and stupid but have you turned the device (hold power button) and back on again? This happens to me sometimes and after a reboot it seems to fix it.
Yeah I do the same thing, the only problem is that it's doing it too often and it's a pain to reset my phone 3 - 4 times a day.
Oh i see. Mine has never done it that often, sorry I can't help any more!
You have a software conflict somewhere - it will be v hard to track down. You could try uninstalling some especially if you have spb products installed as they often are the culprits. But you probably need to hard reset and add programs one by one to find the one.
I had this problem in the past (with old ROMs though)
The way I managed to overcome this is to keep outlook running in the background.
I'm using the Spb Pocket Plus and in the "close button configuration" I added the outlook to the exceptions list. By keeping it running, it always come back with a complete screen (not just top and bottom).
But then again, I didn't see this behavior since I upgraded the ROM; I'm on the 2.26 ROM now.
@gilbnx
Yeah was just thinking of doing something like that more or less.
@meschle
The only spb software I have is spb backup, I always works at first it's just at some point after I've been using the system for a while that it starts doing it. It could be after opening some application and I just haven't noticed. I'll try opening one application at a time and checking to see if it stops working after a certain one, yes tedious I know, but tell you the truth I don't use a whole lotta applications, so I'll stick to the ones I usually open up.
For those of you having this problem, if you are using smartkey, make sure outlook, MMS, Text messaging, are set to be ignored, just like it is in the default smartkey.ini. I had altered the ini and taken out all the programs since I wanted them all to close, but I noticed it started happening after closing outlook with smartkey, so I put it back on ignore and haven't had any problems since (and I hope I won't).
Don't get me wrong. I really love this thing but I seem to have had a spate of lockups and freezes lately. I know the sensible thing is to list all the software etc but I would like your feedback to see if my build is unstable or simply par for the course.
The question is simple -can you please post the number of soft resets you have done in the last 7 days regardless of cause (unless it was an intentional reset after a software install)or build?
Me - 5
cdyat said:
Don't get me wrong. I really love this thing but I seem to have had a spate of lockups and freezes lately. I know the sensible thing is to list all the software etc but I would like your feedback to see if my build is unstable or simply par for the course.
The question is simple -can you please post the number of soft resets you have done in the last 7 days regardless of cause (unless it was an intentional reset after a software install)or build?
Me - 5
Click to expand...
Click to collapse
None this week - approx 1 to 2 a fortnight. (used to be much more but have carried out the various freezing remedies)
Mike
none in the last couple of weeks since i updated the ROM and added the dummy active sync settings
One per four days on average, depends on installed software.
None. I'm using i-mate's latest WWE ROM, the "generic" version - not the Telstra version, and just a hand-full of applications.
Mind you, I use Spb Backup with scheduled backups. This software does a soft reset automatically. This probably minimises the need for further resetting due to lock-ups etc.
Well... bad news. My count is at 15 for TODAY !!!
I'm trying to get this unreliable, unstable pile of Micro$hit to do push-email. Not as easy as advertised! The connection keeps dying almost immediately when the phone enters standby. Upon wakeup chances are 1:10 that a reboot is needed
None lately
Less than 1 a day
About 5 per week for the past three weeks mostly from multi-tasking and an incoming phone call. No push. No hacks either, so I could probably whittle that number down.
Thanks folks - keep them coming. Looks like there isnt a simple answer to this one yet
Running XDA-live 0.10 and all today pluginds and eMail storage on RAM:
*None*
One scheduled reset after SpB Backup at 6 a.m.
Beforehand with WM5: 3-5 a day...
About 1 a day I'd say.. Used to be about 4 a day!
Applestar said:
Running XDA-live 0.10 and all today pluginds and eMail storage on RAM:
*None*
One scheduled reset after SpB Backup at 6 a.m.
Beforehand with WM5: 3-5 a day...
Click to expand...
Click to collapse
I am running LVSW 20070326 and I have had to reset twice since upgrading last Friday -- device would not wake up from sleep. Never had this with WM5. Other than that, no issues.
@Applestar, how did you get Spb Backup to do scheduled backups with WM6? I tried but it fails. A manual backup works OK "with issues", when I click on the link to see what the issues are, it tells me that it was "not able to backup \Windows\compimeh.0409.dat, because NK.EXE has it blocked". I opened a ticket with Spb Software, but they told me that since WM6 has not been officially released by M$, they do not support it yet!
John
#!#
You are right - Spb Scheduled Backup does not work. Really lucky nothing happened the last couple of weeks
Right now, every few days. Originally, about 5 times a day.
I hard booted, loaded programs one at a time to test stability. I keep 2 Notes on my phone: Customizations (where I log any programs, tweaks, etc), and Problems (where I list every freeze up, and what was going on prior to the freeze up). What I have learned:
- I found that if I remove any program that requires internet from the today screen, it was better. It just runs from my menu vs today screen, and it runs quicker too.
- If I install programs to device, it is better. I have been able to run a couple from storage card, but it is rare.
- Keep ActiveSync closed, and do the ActiveSync work around.
- Keep programs closed (I use HTC X button) is a plus.
Workaround for Spb Backup scheduled backups
Applestar said:
You are right - Spb Scheduled Backup does not work. Really lucky nothing happened the last couple of weeks
Click to expand...
Click to collapse
@Applestar, I got another response from Spb Software apologizing for their first message which they asked me to ignore (I guess someone monitoring their responses must have told the CS tech that WM6 was now in the wild!)
Anyway, she told me to try going into the Advanced options for Spb Backup and unchecking the "Stop processes before backup" option. This does work (i.e. allows scheduled backups to complete) and does appear to backup all files except the one that is causing the problem (\Windows\compimeh.0409.dat), which seems to be created on startup by NK.EXE -- I am guessing that it is a debugging file of some sort.
John
johnburn said:
@Applestar, I got another response from Spb Software apologizing for their first message which they asked me to ignore (I guess someone monitoring their responses must have told the CS tech that WM6 was now in the wild!)
Anyway, she told me to try going into the Advanced options for Spb Backup and unchecking the "Stop processes before backup" option. This does work (i.e. allows scheduled backups to complete) and does appear to backup all files except the one that is causing the problem (\Windows\compimeh.0409.dat), which seems to be created on startup by NK.EXE -- I am guessing that it is a debugging file of some sort.
John
Click to expand...
Click to collapse
Your latter point is a known issue and there is a work around to avoid the error listing each time:
Edit Registry :
HKLM\SOFTWARE\Spb Software House\Spb Backup\SkipErrFiles
Add a new entry string:
Name 6
Value: %Windows%\compimeh.dat
Note there may need to be a bit of individual customisation to the entry to fit your exact error.
Also see here:
http://www.pxdxa.com/read.php?tid=27728&keyword=spb
Mike
Highly depends...
Sometimes just 2 a week, sometimes 5-6 a day. Even though the same software remains on the system (I have found decent softwares that I need to accomplish what I expect to do with this device).
Jörg
mikechannon said:
Your latter point is a known issue and there is a work around to avoid the error listing each time:
Click to expand...
Click to collapse
Thanks, Mike. However, the "workaround" you mention only removes the reported error message, it doesn't fix the "scheduled backups doesn't work" problem. For that, you have to disable "Stop processes before backup" in advanced options. IMHO, this is a "workaround" as well, I fully expect that Spb will issue a new version sometime in the near future that will offer full WM6 support.
John
johnburn said:
Thanks, Mike. However, the "workaround" you mention only removes the reported error message, it doesn't fix the "scheduled backups doesn't work" problem. For that, you have to disable "Stop processes before backup" in advanced options. IMHO, this is a "workaround" as well, I fully expect that Spb will issue a new version sometime in the near future that will offer full WM6 support.
John
Click to expand...
Click to collapse
That's right of course - neither issue is fixed by these "workarounds".
Mike
zero this week. When I do reset its almost always due to third party software. The one bug that comes to mind is with pieplus. If I am loading a page in full screen mode and my connection gets lost (rare) it is impossible to get the window to go back to normal mode, hence a reset.
It makes me wonder if its the vendor software that causes all the problems. I have removed just about everything that was installed by 3. Voice commands, push email client, the camera business software etc. It seems because of that it now never goes wrong.
My today screen and task manager are written by myself, so they never cause any crashes
Background:
ATT8525 with the ATTWM5 Rom
All of a sudden no alarm will work on this device. I have SPB Time and City Time Alarm both installed and ever since Saturday morning my daily alarms do not sound.
Thought it was a fluke at first but I've been playing with it tonight trying several different times and nothing seems to work. I even tried the built in WM5 alarm and it didn't work either.
This isn't related to the no sound issue I've inquired about in the past as right now all my OTHER sounds are working.
I've also done multiple soft resets and I've checked and double checked that my phone has the correct time and time zone.
Any ideas?
Thanks
It sounds like you have some duplicate/out of date/bad notifications in your notifications queue.
First do a full backup (just in case) then:
You need to use a 3rd party app such as Checknotifications (free), Memmaid, SK tools.
Use one of these to eliminate duplicate notifications and see if things start working again. If not, unfortunately you will have to go through each one manually. Look at the ones beginning Calendar and Clock. Make sure that the time/date for these is in the future. Delete the ones that are not. Leave alone the other notifications some of these are necessary for other processes.
See if it works now.
If not, you may have to do a hard reset. Good luck!
marisa4755 said:
It sounds like you have some duplicate/out of date/bad notifications in your notifications queue.
First do a full backup (just in case) then:
You need to use a 3rd party app such as Checknotifications (free), Memmaid, SK tools.
Use one of these to eliminate duplicate notifications and see if things start working again. If not, unfortunately you will have to go through each one manually. Look at the ones beginning Calendar and Clock. Make sure that the time/date for these is in the future. Delete the ones that are not. Leave alone the other notifications some of these are necessary for other processes.
See if it works now.
If not, you may have to do a hard reset. Good luck!
Click to expand...
Click to collapse
Thanks for the reply.
Memaid did the trip as it was a built up queue of notifications. Not sure what caused that but at least it's fixed without having to do a hard reset.
This never happened with my 8125, strange.
Also, this fixed a couple of other issues I was having.
My 8525 had stopped pairing with my automobile's BT and it did this morning, and the last few days the phone and stopped doing the first active sync of the day (at 0700) automatically. It did this morning.
Looks like I may check into purchasing Memaid. It's a handy little program.
I have to admit, it's one of the first apps on any device I own. Especially now that it has a reg editor too.
Beware, you may need to do the notifications queue clearout quite frequently, just keep an eye on it for a day or 2. I've found that if you use windows live mobile, this puts 3 or 4 duplicates on your system at every soft reset! Don't you just love microsoft applications?
marisa4755 said:
I have to admit, it's one of the first apps on any device I own. Especially now that it has a reg editor too.
Beware, you may need to do the notifications queue clearout quite frequently, just keep an eye on it for a day or 2. I've found that if you use windows live mobile, this puts 3 or 4 duplicates on your system at every soft reset! Don't you just love microsoft applications?
Click to expand...
Click to collapse
Gee I wonder if the iPhone's have to do this?
Sorry, couldn't resist.
They probably would have to if they were allowed to install 3rd party applications!
marisa4755 said:
They probably would have to if they were allowed to install 3rd party applications!
Click to expand...
Click to collapse
Sharp answer Marisa4755 - I also think texas should be punished for that uncalled for remark; I'm thinking 6 month ban (I always was too lenient )
Mike
Nah
I'll just retaliate by posting on the iphone-developers forums
marisa4755 said:
Nah
I'll just retaliate by posting on the iphone-developers forums
Click to expand...
Click to collapse
Oh thank you.
At first I thought you all were just ganging up on my since I'm across the pond from you all. <G>
Kinda back to my original question.
What is up with the Notification Queue? I currently have 37 "time based" entries. A few of these are obvious. But I have a whole mess named "\\.\Notifications\NamdedEvents\Scripts:0x0023B3D0" and a couple of dozen more with similar hexadecimal(?) endings.
They are all "dated to run" on September 26, 2007 at various times of the morning.
The thing is, nothing is in my calender on that date. So what in the world are those entries? Are they safe to delete?
Thanks
Don't mind us, if you play with Windows mobile, you just have to have a laugh as often as possible (makes up for all the crying!).
On your alarms/reminders/notifications etc, do you have the setting on for 'flash light'? If so, do you have this set for no limit? If so, I think these are your scripts as above. If they are set as no limit, I think they go on for around 40 days or so. So probably they relate to an event 40 ish days before 26 September.
They might also relate to some other software you are running. I understand TomTom puts some strange notifications in.
If so, they are PROBABLY fine to delete. As long as you do a full backup before touching them, then if it all goes pear shaped, just restore your backup.
Whatever you do, don't touch the repllog.exe entries. These relate to activesync and if you delete these, you will have a lot of trouble with synchronising.
If, however you do accidentally delete a repllog file that you should't, Mike has written an excellent guide on how to get it back!
http://forum.xda-developers.com/showthread.php?t=302459&highlight=repllog.exe+activesync
marisa4755 said:
Don't mind us, if you play with Windows mobile, you just have to have a laugh as often as possible (makes up for all the crying!).
On your alarms/reminders/notifications etc, do you have the setting on for 'flash light'? If so, do you have this set for no limit? If so, I think these are your scripts as above. If they are set as no limit, I think they go on for around 40 days or so. So probably they relate to an event 40 ish days before 26 September.
They might also relate to some other software you are running. I understand TomTom puts some strange notifications in.
If so, they are PROBABLY fine to delete. As long as you do a full backup before touching them, then if it all goes pear shaped, just restore your backup.
Whatever you do, don't touch the repllog.exe entries. These relate to activesync and if you delete these, you will have a lot of trouble with synchronising.
If, however you do accidentally delete a repllog file that you should't, Mike has written an excellent guide on how to get it back!
http://forum.xda-developers.com/showthread.php?t=302459&highlight=repllog.exe+activesync
Click to expand...
Click to collapse
Thanks. I think the message notification thing is the reason. I do have the flash light checked and their seems to be a correlation between the entries and the number of messages I currently have in OL.
Thanks again for all the help!
Hopefully I can return the favor sometime.
David
I hope by now you have solved your (our) problem. I was able to fix my problem by installing a free program from Burr Oak called Wakeup Tweak.
I never ever RAN the program - I just installed it. During installation, it asked me if I wanted to use default notifications and I said yes.
I then tested an appointment alarm (before running Wakeup Tweak) and the alarm worked.
Hey there... I used to have the same problem under WM5 (I think it was a known fault and the idea was to fix that for WM6). My reminders didn't work, and my alarm, initially came on but I could not dismiss it, and so came back on the moment I switched my phone back on etc. I found that using Pocket Mechanic and then deleting all 'clock.exe' entries i which have the word obsolete added under the type column solves the problem. I think some people have experienced problems doing this and it messed up their device. I, personally, never had any problems but you may want to back up things just in case. Again, it's not a long-term solution and I had to do that every couple of weeks. The deleting of duplicate notification did not, for me, restore reminders etc. I have to say ever since I upgraded to WM6 I have not had this problem so I guess Microsoft fixed this issue.
I was just wondering if anyone else have had any of these problems that I have been having.
1. Sometimes the phone will not play any sound at all no music,slide sounds, or ring but i can make a call and hear and talk perfect and the phone will vibrate when i get a call i made sure the sounds are on. Soft reset fixes this everytime but it seems to happen more now like every other day.
2. I have the 6 tab HTC home plugin on my today screen and it used to play music right off the today screen on its own media player not WM. Now when i try to use it it opens WM and i cant change songs from my today screen and it seems stuck on a song but it does not change or update the track info. The only thing it does is open WM when i tap the song name but nothing else. I think I might of messed this up when i reinstalled the WM play button today plugin and i now set the plugin to use the HTC audio manager but i would like it to control WM like i wanted to and the 6 tab plugin to control the HTC audio like its supposed to
3.Almost everytime i get 2 text messages at the same time or a phone call and text at or close to the same time this thing goes nuts vibrating till i turn it off.
4. Sometimes when i use Windows media player and use one of my playlist some of the songs say file cannot be found and i have to delete the song and go back and add it again when its in the same folder as it always is.
Anyone else having any of these problems or am i the only one? I have the new ROM installed and alot of other junk
the no sound problem i have encounterd. as a matter of fact it happened twice today. don't know what that's about.
as for the rest of your issues i have never experienced them. i do have the 6 tab home plugin and i do play music but i've never experienced number 2.
Do you have anything setup in your calendar? On one of the HTC Home tabs, it has the sound settings. If it is set on automatic, it will put the phone on vibrate if you have any appointments on your calendar, and turn back the sound when the appointment is over.
5.0stang said:
3.Almost everytime i get 2 text messages at the same time or a phone call and text at or close to the same time this thing goes nuts vibrating till i turn it off.
Click to expand...
Click to collapse
I also have the same 6 tab HTC today installed.
And almost everytime I get a txt or an email notification + a phone call at the same time, the unit freaks out, I can't answer the phone and I almost have to always perform a hard reset.
I have these installed:
- HTC Home Customizer
- TCPMP
- flashlight
- Google maps
- Opera Browser
- PHM RegEdit
- PocketCMD
- RDP Port Switcher
- Telus Mobile Email (visto client I think)
- X-Button
Running WM6
Same Problem.. No Sound
I am having the same problem!!
I am on my second Mogul now due to the fact that intermittently
all the sounds from the speaker stop working. (Ringer, Music, everything)
The sounds come back after a soft reset but it's very annoying!
I have seen other posts with people having this problem but no solutions.
I believe this is a software issue not a hardware as this is my second Mogul this is happening to (the first one I RMA'd for this same issue) and I have tried several different software products on the phone.
This is the what I had on the first mogul:
SPB Mobile Shell
SPB Phone Suite
SPB Pocket Plus
SPB Backup
IM Plus
Resco Explorer
Sk Tools
2kTweaks
This is what I put on the second mogul:
HTC Home (6 Tab)
HandySwitcher
IM Plus
Resco Explorer
SPB Backup
SK Tools
Both are losing all sounds after a period on time!!
If anyone can help me figure out I am periodicly losing sound I would be forever in your debt!!!!
Here's a crazy thought.... any of you try to do a hard reset and NOT load any third party or non-native apps onto the Mogul to see what happens for a few days?
TC1.... The phone is useless without some of these apps.... I can't pull out the stylus everytime I want to do something on the phone....
There are usually alternative apps. I guess the question is would you rather find the cause to the sound problem or run those apps?
ImCoKeMaN said:
There are usually alternative apps. I guess the question is would you rather find the cause to the sound problem or run those apps?
Click to expand...
Click to collapse
Exactly.
This is troubleshooting 101... need to setup a controlled experiment. Start with the basic product and go from there. Note your observations. Add one application at a time and note your observations. Using deductive logic you'll eventually find the cause.
And others please don't whine about the Mogul being "unusable" without these extra apps. The Mogul functions out of the box as a phone and WM6 PDA. Do some of these apps make you more productive? Absolutely. But in order to troubleshoot you can live without them for a few days.
This is my 2 pda in less than 3 months when i 1st had it i didnt know i could install all these apps so it was at least a week or two before i found this site and a few others and i remember i installed the new ROM hoping it would fix the problem...still hoping...
IM+....
Some people have claimed that it's IM+ thats causing the issue........ I will uninstall it and see what happens.... Let's keep this post alive and get the bugs out!....
Got #2 onmy list fixed now i can use the HTC audio manager on my 6th tab and my windows on the today screen on the bar right underneath if i knew how to get a pic of my screen it would be easier to explain what im talkin bout...still waitin on a ROM fix or something.... or REV A
TC1 said:
Exactly.
This is troubleshooting 101... need to setup a controlled experiment. Start with the basic product and go from there. Note your observations. Add one application at a time and note your observations. Using deductive logic you'll eventually find the cause.
And others please don't whine about the Mogul being "unusable" without these extra apps. The Mogul functions out of the box as a phone and WM6 PDA. Do some of these apps make you more productive? Absolutely. But in order to troubleshoot you can live without them for a few days.
Click to expand...
Click to collapse
I agree 100% with you TC1.. I have similar apps listed installed on mine and have no issues. Now when I first came across HTC Home installer I did have issues with certain alerts / ringers not working. This was mainly if I had removed my SD card temporarily and at the same time received a call / alert. Of course it wouldnt sound but when I would put back the SD it still wouldnt sound so I had no choice but to reboot the device.
What I determined is setting the HTC profile to SILENT prior to removing the SD card avoids having to reboot in the invent I would get a message / alert / fone call. Since then no issues.
Also installing the more current HTC home helped out.. As ringer profiles on occasion would set itself to SILENT / VIBRATE on it own.
Ive always thought it had something to do with the 6tab HTC home plugin but i removed it and it still did it
I believe it has nothing to do with any 3rd party software but the phone (windows,HTC,Sprint) itself.... I just wish there was a way to fix it!!
Have anyone with WM5 loaded on their titan had these problems? I really wanna know y i cant use any playlist on my windows media player more then 5 times before it says file can not be found in libary when i have not moved anything
same probem quick fix
i get the same problem.
but all i do is turn it of and then turn it back on and it works great.
haven't figured out what is causing it, all i know is that it does it after i get on line. don't have any third party software on it yet so that could not be the problem. i am how ever looking for spb phone suite or anything with smson it for mobile 6. mogul titan
Every time I hit the space bar now, or a symbol key, whether it be in an e-mail, browser, text; whether it is the virtual keyboard or actual, my phone will all of a sudden just quit out of whatever app. it is in. Anybody know what the heck this is?!
hey man i've got the same problem!
did yours got fixed?
and how?
Same here. You guys running WM6.5?
i think its from some registry entries not agreeing...
i've seen similar closing of programs with random button presses
try and narrow in on the scenario with your latest additions to the device...
i would be surprised if this is happening on stock rom
i would suggest all posting up your current rom/carrier...etc
thats how it will get narrowed in on
personally i installed a new rom and it went away
i tried using a backup program and it didn't solve it...problem was saved in there
so all my settings had to be entered manually again
it may have been my backup program at the time (spb clone) which sucks in my opinion
using sprite backup now and seems to be effective (two successful backups logged)
but i didn't use sprite at the time of this issue
try one of the newer roms available